Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Modeling global structural damping in trusses using simple continuum models

Truss beams with members having viscous damping are modeled as continuum Timoshenko beams. Procedures for deriving the equivalent beam stiffnesses and damping are presented. The global damping for the continuum beam is explicitly expressed in terms of the damping coefficients of the individual truss members. The continuum beam model is used to study transient vibration problems and the solutions are compared well with the full scale finite element solutions. The gradient method is used for parameter estimations in conjunction with the Timoshenko beam model. It is shown that the Timoshenko beam model can be easily updated with measured data and the updated model can yield very accurate transient solutions.

Sun, C. T.↗

Applications of model structure determination to flight test data

Several statistical and information criteria need to be considered when selecting an adequate model. Incorrect stability and control derivates result from inadequate aerodynamic model structure. Stepwise regression is used to determine the structure for an adequate model. Flight data which covers a nonlinear aerodynamic model range may be analyzed as a single data set or partitioned into several distinct sets. Stepwise regression for model structure detemination and parameter estimation was successfully applied to three aircraft types (single engine general aviation, unaugmented modern jet fighter, jet transport).

Batterson, J. G.↗

The upper mantle beneath the Cascade Range: A comparison with the Gulf of California

Seismograms from 22 earthquakes along the northeast Pacific rim recorded in southern California form the data set for investigation of the upper mantle beneath the Cascade Range-Juan de Fuca region, a transitional area encompassing both very young ocean floor and a continental margin. These data consist of 853 seismograms (6 deg delta 42 deg) which produce 1068 travel times and 40 ray parameter estimates. These data are compared directly to another large suite of records representative of structure beneath the Gulf of California, an active spreading center. The spreading center model, GCA, was used as a starting point in WKBJ synthetic seismogram modeling and perturb GCA until the northeast Pacific data are matched. Application of wave field continuation to these two groups of data provides checks on model's consistency with the data as well as an estimate of the resolvability of differences between the two areas. Differences between the models derived from these two data sets are interpretable in terms of lateral structural variation beneath the two regimes.

Walck, M. C.↗

Radar observations of inertial period waves in the lower stratosphere over Arecibo

Several hundred hours of wind velocity measurements made with the Arecibo 430-MHz radar during the past few years have indicated the presence of persistent wave like structures just above the tropopause. To further investigate these structures, a nearly continuous times series of wind measurements in the upper troposphere and lower stratosphere was made from May 5 to May 12, 1982 at Arecibo. Each of 16 compass points was sampled as the 430-MHz feed was rotated in a velocity azimuth display (VAD) mode at a zenith angle of 15 degrees off-vertical. Using a nonlinear least squares parameter estimation technique line of sight velocities were calculated from Doppler shifts of the received spectra. These velocities were reduced to zonal and meridional components of the wind vector; the vertical component of the wind vector will be available after further reduction.

Cornish, C. R.↗

The ERODYN and QRPIG computer programs

The role of the ERODYN computer program in providing error analyses involving orbital, geodetic, and geophysical parameters is discussed. It was designed to operate as a companion program to the GEODYN orbit determination and parameter estimating program. The Q R Partitioned Eigenvalue/Eigenvector analysis program (QRPIG) is designed to process symmetric matrices with an out-of-core partitioning algorithm for the eigenvectors and eigenvalues of the matrices.

Felsentreger, T. L.↗

Spacecraft structural system identification by modal test

A structural parameter estimation procedure using the measured natural frequencies and kinetic energy distribution as observers is proposed. The theoretical derivation of the estimation procedure is described and its constraints and limitations are explained. This procedure is applied to a large complex spacecraft structural system to identify the inertia matrix using modal test results. The inertia matrix is chosen after the stiffness matrix has been updated by the static test results.

Chen, J.-C.↗

A minimal residual method for transonic potential flows

For transonic flow calculations, a combination of the successive line over-relaxation (SLOR) and the preconditioned conjugate gradient (CG) method has been suggested by Wong and Hafez (1981). This paper studies the method of minimal residual (MR) which avoids a combined iteration. This method is closely related to the CG method, may be regarded as a first-order gradient method, and is applicable to symmetric and nonsymmetric matrices. The problem is formulated as a nonlinear mixed elliptic-hyperbolic partial differential equation which includes an artificial viscosity and a switching function which is zero in subsonic regions and nonzero in supersonic regions. Alternatives to the SLOR method which provide faster convergence rates are introduced. The preconditioned MR algorithm is developed, and transonic potential flows around NACA 0012 airfoil are calculated for different Mach numbers and angles of attack. Preliminary results are presented, demonstrating that the MR algorithm requires no parameter estimation and rapidly converges for subsonic flows.

Wong, Y. S.↗

Orbits of the small inner satellites of Jupiter

Voyager images led to the discovery of the three small inner satellites of Jupiter, Adrastea, Metis, and Thebe. Attention is presently given to orbital parameter estimates and associated uncertainties that have been determined from Voyager imaging data, the achievable angular accuracy of which is about 0.00005 rad.

Synnott, S. P.↗

Ultraviolet photometry from the Orbiting Astronomical Observatory. XXXIX - The structure of the eclipsing Wolf-Rayet binary V444 Cygni as derived from light curves between 2460 A and 3. 5 microns

The WN5 component of V444 Cyg is characterized on the basis of light curves constructed using 1971 OAO observations at 425, 332, 298, and 246 nm and the broadband data at 2.2 and 3.5 microns of Hartmann (1978). Data and calculation results are presented in tables and graphs and discussed. Parameters estimated include core radius 2.9 solar radii, surface temperature 90,000 K, surface electron density 9 x 10 to the 12th/cu cm, surface outflow velocity 400 km/s, and terminal velocity (at about 10 solar radii) 2500 km/s, suggesting that the flow is He. These results are found to agree with the model of Wolf-Rayet atmospheres proposed by Beals (1929, 1944).

Cherepashchuk, A. M.↗

Modeling clear-air turbulence with vortices using parameter-identification techniques

A vortex model of winds associated with clear-air turbulence (CAT) is shown to be useful for characterizing actual airline CAT encounters. The model consists of an array of vortices with solid-body cores embedded in a potential flow field. Parameters such as the size and strength of the vortices and their locations are identified using a modified Newton-Raphson algorithm. A manual identification start-up scheme is used to minimize errors in the initial parameter estimates, and the identification algorithm is found to be robust in regard to the remaining errors. The analysis of a CAT encounter involving a commercial airliner demonstrates the success of the model and estimation procedure. The analysis finds vortices with core diameters of 1000 ft and tangential velocities of 87 ft/sec in this encounter.

Mehta, R. S.↗

A program to form a multidisciplinary data base and analysis for dynamic systems

Diverse sets of experimental data and analysis programs have been assembled for the purpose of facilitating research in systems identification, parameter estimation and state estimation techniques. The data base analysis programs are organized to make it easy to compare alternative approaches. Additional data and alternative forms of analysis will be included as they become available.

Taylor, L. W.↗

Numerical models for cometary dust environments

The development of a numerical model for the dust environment near a comet is described. The major components of the model are a simple treatment of the acceleration of the dust by the gas outflow from an isothermal icy nucleus, a detailed treatment of the dust particle trajectories controlled by solar gravity and radiation pressure, including the formation of the dust envelope and tail, and a simple treatment of the radiation from the dust in the visible and thermal infrared. The results of recent comet observations are used to estimate parameter values for the model, including dust-to-gas ratios by light and by mass, the distribution of dust and gas emission on the nuclear surface, the distributions of dust particle size, density, mass, and radiative properties, and other quantities. Gas and dust production rates as functions of time are derived from observed light curves using the simple photometric theory. Sample results are presented for the dust concentration, flux and fluence along the trajectory of a spacecraft which flies by Comet P/Halley in 1986.

Divine, N.↗

Definition of ground test for Large Space Structure (LSS) control verification, appendix G

A Large Space Structure (LSS) ground test facility was developed to help verify LSS passive and active control theories. The facility also perform: (1) subsystem and component testing; (2) remote sensing and control; (3) parameter estimation and model verification; and (4) evolutionary modeling and control. The program is examined as is and looks at the first experiment to be performed in the laboratory.

Source record↗

Structure Errors in System Identification

An approach to system identification is presented which explicitly takes structure errors into account and hence provides a systematic way for answering questions concerning the magnitude of estimated parameter errors resulting from structural errors. It is indicated that, from this point of view, it is possible to define near equivalence between process and model and to obtain meaningful theoretical results on solution error system identification. It remains to apply these results to large realistic problems such as those involving models of complex man machine systems.

Bekey, G. A.↗

Numerical and experimental evaluation for single-axis control of an LSS laboratory model

One of the major problems of LSS attitude control design stems from the modeling uncertainties due to modal truncation errors and modal parameter estimation errors. This modeling problem is investigated by evaluating poles and zeros of the frequency response functions, described in terms of constrained or unconstrained modes. The frequency domain approach is utilized to evaluated the results of modal analyses and direct output feedback controller experiments using a simple flexible spacecraft model consisting of a rigid primary body and flexible aluminum beam(s) with a control moment gyro as an actuator. The modal data are compared under the conditions that the model is constrained as the canti-lever and it is rotationally free on a single-axis air bearing table. In addition, the open-loop responses are experimentally examined under the impulsive disturbance to the appendage. The results of the control experiments show that the first vibration mode of the appendage and the interacted rotational motion of the primary body are damped in a short time as predicted by the numerical analysis, to produce damping ratio of 10-20%.

Ohkami, Y.↗

Identification of unsteady aerodynamics and aeroelastic integro-differential systems

The problem of estimating integro-differential models based on test or simulation data is dealt with. The identification techniques proposed for estimating parameters in models described by differential equations need to be considerably extended to deal with the integral terms. Conditions under which the integral terms may be approximated by algebraic values are discussed. The integro-differential models discussed are related to indicial models proposed by aerodynamicists to describe unsteady flow.

Gupta, N. K.↗

Space station on-orbit identification and performance monitor

This paper describes the generic applications of on-orbit identification to the reference Space Station configuration currently under consideration by NASA. Identification functions are categorized, and the various methods for extracting parameter estimates are correlated with the sensing of specific characteristics of interest to both engineering subsystems and users of the Station's commercial and scientific facilities. A case study of crew motion detection and identification is included to illustrate the application to the Station's disturbance environment and plant characterization using accelerometer sensing. Onboard implementation architecture is discussed from the viewpoint of maximizing integration of the identification process with the flight subsystem's data and signal flow.

Mettler, E.↗