Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROPAGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Scheduling message processing for reducing rollback propagation

Traditional checkpointing and rollback recovery techniques for parallel systems have typically assumed the communication pattern is specified by program behavior. In this paper we exploit the property that the communication pattern can often be changed at run-time without affecting program correctness. A scheduling algorithm for message processing and its implementation for reducing rollback propagation are described. The algorithm incorporates a user-transparent prioritized scheme based upon the run-time communication and checkpointing history. Communication trace-driven simulation for several parallel programs written in the Chare Kernel language demonstrates that the probability of rollback propagation can be reduced at the cost of slight additional performance degradation.

Wang, Yi-Min↗

Propagation characteristics of waves upstream and downstream of quasi-parallel shocks

The propagation characteristics of waves upstream and downstream of quasi-parallel shocks are investigated by using 2D hybrid simulations. At low Alfven Mach numbers, M(A) below about 2, the shock is initially associated with upstream phase-standing whistlers. At later times, backstreaming ions excite longer-wavelength whistlers via the right-hand resonant ion/ion instability. These waves propagate along the magnetic field at a group velocity no smaller than the upstream flow speed, so that the waves remain in the upstream region. At higher MA (above about 3), these waves are convected back into the shock, causing its reformation and downstream perturbations. Shock transmitted waves mode-convert into Alfven/ion-cyclotron waves which have a wave vector along the shock normal (pointing upstream) and convect downstream. The 2D simulation results confirm our earlier suggestion that the upstream waves should be field aligned, and that their convection into the downstream is associated with linear mode conversion into the Alfven/ion-cyclotron branch.

Krauss-Varban, D.↗

Whistlers and plasmaspheric hiss - Wave directions and three-dimensional propagation

Wave propagation directions are determined on the basis of wave data from the DE 1 satellite showing simultaneously nonducted whistlers and hiss. Hiss wave normal angles are determined as about 70 and 77 deg for f = 3.5 and 2.5 kHz, respectively, with the wave vector being almost perpendicular to the meridional plane. A novel approximate analytical formulation of 3D propagation of whistler waves is developed and used to model the drift of magnetospherically reflected whistlers in azimuth. It is shown that depending on initial parameters, the time of arrival of whistler rays at a fixed observation point can differ by 10-20 s, with signals from different magnetospherically reflected whistlers overlapping to evolve into a hisslike signal. The total azimuthal drift of whistler rays is found to not exceed about 30 deg, so that plasmaspheric hiss may be produced by nonducted whistlers at longitudes correlated with the location of thunderstorm activity.

Draganov, A. B.↗

Bifurcation analysis of a simple analytic model of self-propagating star formation

We investigate the structure and stability of rotationally symmetric nonhomogeneous time-independent solutions derived from a simple analytic model of self-propagating star formation. For this purpose we employ two methodologies: We use bifurcation theoretical methods to prove the existence of nonhomogeneous axisymmetric stationary solutions of an appropriate nonlinear evolution equation for the stellar density. We show that the nonhomogeneous solution branch bifurcates from the homogeneous one at a critical parameter value of the star formation rate. Further, the analytical theory allows us to show that the new solution set is stable in the weakly nonlinear regime near the bifurcation point. To follow the solution branch further, we use numerical methods. The numerical calculation shows the structure and stability of these solutions. We conclude that no periodic time-dependent solutions of this special model exist, and no further bifurcations can be found. The same results have been found in simulations of stochastic self-propagating star formation based on similar models. Therefore, our findings provide a natural explanation, why long-lived large-scale structure have not been found in those simulations.

Neukirch, Thomas↗

Magnetohydrodynamic wave propagation in one-dimensional nonhomogeneous, self-gravitating clouds

We study the propagation of magnetohydrodynamic (MHD) waves through nonhomogeneous, selfgravitating, magnetic media representative of molecular cloud environments and focus on the issues of cloud support and line profiles. Since the general treatment of this topic is burdened by a complex mathematical formalism, we consider simplifying geometries which yield analytical solutions in the linear wave limit. In particular, we study both magnetoacoustic and Alfven wave propagation along the density gradient in a one-imensional slab. Of specific relevance to molecular clouds, we find that the back reaction of the Alfven waves can provide a pressure along the direction of the magnetic field lines; this pressure can help support a density enhancement against gravitational collapse. Furthermore, we find that the velocity amplitudes of these waves increase as the density decreases, in rough agreement with observational estimates of line width versus density relations.

Fatuzzo, Marco↗

Premixed Flame Propagation in an Optically Thick Gas

Flame propagation in both the optically thin and the optically thick regime of radiative transport was studied experimentally using particle-laden gas mixtures. Data on flame shapes, propagation rates, peak pressure, maximum rate of pressure rise, and thermal decay in the burned gases are consistent with the hypothesis that, at low particle loadings, the particles act to increase the radiative loss from the gases, whereas at higher loadings, reabsorption of emitted radiation becomes significant. The reabsorption acts to decrease the net radiative loss and augment conductive heat transport. It is speculated that, in sufficiently large systems, in which the absorption length is much smaller than the system size, flammability limits might not exist at microgravity conditions because emitted radiation would not constitute a loss mechanism.

Abbud-Madrid, Angel↗

Variation of the pressure limits of flame propagation with tube diameter for propane-air mixtures

An investigation was made of the variation of the pressure limits of flame propagation with tube diameter for quiescent propane with tube diameter for quiescent propane-air mixtures. Pressure limits were measured in glass tubes of six different inside diameters, with a precise apparatus. Critical diameters for flame propagation were calculated and the effect of pressure was determined. The critical diameters depended on the pressure to the -0.97 power for stoichiometric mixtures. The pressure dependence decreased with decreasing propane concentration. Critical diameters were related to quenching distance, flame speeds, and minimum ignition energy.

TEST APPARATUS - FLAME PROPOGATION - LFPL↗

Analyzing Acoustic Propagation In A Pump Diffuser And Volute

Theory and computer codes developed for use in analyzing propagation of sinusoidal components of fluctuations of pressure (acoustic waves) through fluid in diffuser and in volute or discharge duct of centrifugal pump. Reflections from impedance mismatches taken into account. Such analysis of propagation and resultant fluctuations of pressure important part of analysis of fluid-borne contributions to stresses on volute housing, volute liner, and/or discharge duct.

Chon, Juliet T.↗

Plans to improve the experimental limit in the comparison of the east-west and west-east one-way light propagation times on the rotating earth

The preceding paper describes the results so far (interrupted in the Spring of 1989 because of lack of funds) of an experiment comparing the one-way light propagation times on the surface of the rotating Earth. For the 20 Km path length component in the East-West direction the predicted difference between the opposite sense propagation times would be 160 ps, if the approximately 360 Km/s surface speed of the Earth gives effective light speeds of 3 x 10(exp 8) m/s +/- 360 m/s. This could lead to a prediction of the difference between the clock transport and the light pulse synchronization methods described in the preceding paper: delta(T) = 0.5 (160) = 80 ps. The current upper bound of approximately 100 ps for delta(T) is limited by poorly understood systematic errors. The most important seems to be intensity-dependent time delays in the remote light pulse avalanche photo-diode detector. This will be replaced by a continuously operating circular scan streak camera having single photon sensitivity and a time resolution of approximately 5 ps. (This camera has recently been developed by the Xian Institute of Optics and Precision Mechanics in the P.R.C.). Better isolation from shocks and vibration for the Sigma-Tau hydrogen maser during transport will be provided. It is hoped that delta(T) is less than 20 ps can be achieved.

Alley, C. O.↗

Contribution towards a draft revision of recommendations 681: Propagation data required for the design of Earth-space land mobile telecommunications systems

Propagation models that can be used for the design of earth-space land mobile-satellite telecommunications systems are presented. These models include: empirical roadside shadowing, attenuation frequency scaling, fade and non-fade duration distribution, multipath in a mountain environment, and multipath in a roadside tree environment. Propagation data from helicopter-mobile and satellite-mobile measurements in Australia and the United States were used to develop the models.

Davarian, Faramaz↗

Propagation considerations in the American Mobile Satellite system design

An overview of the American Mobile Satellite Corporation (AMSC) mobile satellite services (MSS) system with special emphasis given to the propagation issues that were considered in the design is presented. The aspects of the voice codec design that effect system performance in a shadowed environment are discussed. The strategies for overcoming Ku-Band rain fades in the uplink and downlink paths of the gateway station are presented. A land mobile propagation study that has both measurement and simulation activities is described.

Kittiver, Charles↗

The ACTS propagation terminal delivery and support

Viewgraphs on the Advanced Communications Technology Satellite (ACTS) propagation terminal delivery and support are included. Topics covered include: the ACTS propagation terminal (APT) development program; terminal overview; physical units; test results; status of terminals and schedule; shipping cartons; and site support.

Stutzman, Warren L.↗

Data collection with the ACTS propagation terminal

Viewgraphs on data collection with the ACTS propagation terminal are included. Topics covered include: DACS system overview; DACS board; APT data collection computer; APT software downloading; data storage for APT; and ACTS propagation experiment data flow.

Remaklus, Will↗

Propagation measurements in Alaska using ACTS beacons

The placement of an ACTS propagation terminal in Alaska has several distinct advantages. First is the inclusion of a new and important climatic zone to the global propagation model. Second is the low elevation look angle from Alaska to ACTS. These two unique opportunities also present problems unique to the location, such as extreme temperatures and lower power levels. These problems are examined and compensatory solutions are presented.

Mayer, Charles E.↗

Propagation-related AMT design aspects and supporting experiments

The ACTS Mobile Terminal (AMT) is presently being developed with the goal of significantly extending commercial satellite applications and their user base. A thorough knowledge of the Ka-band channel characteristics is essential to the proper design of a commercially viable system that efficiently utilizes the valuable resources. To date, only limited tests have been performed to characterize the Ka-band channel, and they have focused on the needs of fixed terminals. As part of the value of the AMT as a Ka-band test bed is its function as a vehicle through which tests specifically applicable to the mobile satellite communications can be performed. The exact propagation environment with the proper set of elevation angles, vehicle antenna gains and patterns, roadside shadowing, rain, and Doppler is encountered. The ability to measure all of the above, as well as correlate their effects with observed communication system performance, creates an invaluable opportunity to understand in depth Ka-band's potential in supporting mobile and personal communications. This paper discusses the propagation information required for system design, the setup with ACTS that will enable obtaining this information, and finally the types of experiments to be performed and data to be gathered by the AMT to meet this objective.

Dessouky, Khaled↗

Propagation research in Japan

L-band propagation measurements for land-mobile, maritime, and aeronautical satellite communications have been carried out by using the Japanese Engineering Test Satellite-Five (ETS-5) which was launched in Aug. 1987. This paper presents propagation characteristics for each of the mobile satellite communication channels.

Wakana, Hiromitsu↗

Environment enhanced fatigue crack propagation in metals: Inputs to fracture mechanics life prediction models

This report is a critical review of both environment-enhanced fatigue crack propagation data and the predictive capabilities of crack growth rate models. This information provides the necessary foundation for incorporating environmental effects in NASA FLAGRO and will better enable predictions of aerospace component fatigue lives. The review presents extensive literature data on 'stress corrosion cracking and corrosion fatigue.' The linear elastic fracture mechanics approach, based on stress intensity range (Delta(K)) similitude with microscopic crack propagation threshold and growth rates, provides a basis for these data. Results are presented showing enhanced growth rates for gases (viz., H2 and H2O) and electrolytes (e.g. NaCl and H2O) in aerospace alloys including: C-Mn and heat treated alloy steels, aluminum alloys, nickel-based superalloys, and titanium alloys. Environment causes purely time-dependent accelerated fatigue crack growth above the monotonic load cracking threshold (KIEAC) and promotes cycle-time dependent cracking below (KIEAC). These phenomenon are discussed in terms of hydrogen embrittlement, dissolution, and film rupture crack tip damage mechanisms.

Gangloff, Richard P.↗

Utilizing a TDRS satellite for direct broadcast satellite-radio propagation experiments and demonstrations

The NASA/VOA Direct Broadcast Satellite - Radio (DBS-R) Program will be using a NASA Tracking Data Relay Satellite (TDRS) at 62 deg West longitude to conduct live satellite S-band propagation experiments and demonstrations of satellite sound broadcasting over the next two years (1993-1994). The NASA/VOA DBS-R program has applied intensive effort to garner domestic and international support for the DBS-R concept. An S-band DBS-R allocation was achieved for Region 2 at WARC-92 held in Spain. With this allocation, the DBS-R program now needs to conduct S-band propagation experiments and systems demonstrations that will assist in the development of planning approaches for the use of Broadcast Satellite Service (Sound) frequency bands prior to the planning conference called for by WARC-92. These activities will also support receiver concept development applied to qualities ranging from AM to Monophonic FM, Stereophonic FM, Monophonic CD, and Stereophonic CD quality.

Hollansworth, James E.↗