Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Data-driven electron-diffraction approach reveals local short-range ordering in CrCoNi with ordering effects

Abstract The exceptional mechanical strength of medium/high-entropy alloys has been attributed to hardening in random solid solutions. Here, we evidence non-random chemical mixing in a CrCoNi alloy, resulting from short-range ordering. A data-mining approach of electron nanodiffraction enabled the study, which is assisted by neutron scattering, atom probe tomography, and diffraction simulation using first-principles theory models. Two samples, one homogenized and one heat-treated, are observed. In both samples, results reveal two types of short-range-order inside nanoclusters that minimize the Cr–Cr nearest neighbors (L1 2 ) or segregate Cr on alternating close-packed planes (L1 1 ). The L1 1 is predominant in the homogenized sample, while the L1 2 formation is promoted by heat-treatment, with the latter being accompanied by a dramatic change in dislocation-slip behavior. These findings uncover short-range order and the resulted chemical heterogeneities behind the mechanical strength in CrCoNi, providing general opportunities for atomistic-structure study in concentrated alloys for the design of strong and ductile materials.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Infrastructure development for radioactive materials at the NSLS-II

The X-ray Powder Diffraction (XPD) Beamline at the National Synchrotron Light Source-II is a multipurpose instrument designed for high-resolution, high-energy X-ray scattering techniques. In this article, the capabilities, opportunities and recent developments in the characterization of radioactive materials at XPD are described. The overarching goal of this work is to provide researchers access to advanced synchrotron techniques suited to the structural characterization of materials for advanced nuclear energy systems. XPD is a new beamline providing high photon flux for X-ray Diffraction, Pair Distribution Function analysis and Small Angle X-ray Scattering. The infrastructure and software described here extend the existing capabilities at XPD to accommodate radioactive materials. Such techniques will contribute crucial information to the characterization and quantification of advanced materials for nuclear energy applications. We describe the automated radioactive sample collection capabilities and recent X-ray Diffraction and Small Angle X-ray Scattering results from neutron irradiated reactor pressure vessel steels and oxide dispersion strengthened steels.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Understanding Multiscale Structural Changes During Dilute Acid Pretreatment of Switchgrass and Poplar

Biofuels produced from lignocellulosic biomass hold great promise as a renewable alternative energy and fuel source. To realize a cost and energy efficient approach, a fundamental understanding of the deconstruction process is critically necessary to reduce biomass recalcitrance. Here, the structural and morphological changes over multiple scales (5–6000 Å) in herbaceous (switchgrass) and woody (hybrid poplar) biomass during dilute sulfuric acid pretreatment were explored using neutron scattering and X-ray diffraction. Switchgrass undergoes a larger increase (20–84 Å) in the average diameter of the crystalline core of the elementary cellulose fibril than hybrid poplar (19–50 Å). Switchgrass initially forms lignin aggregates with an average size of 90 Å that coalesce to 200 Å, which is double that observed for hybrid poplar, 55–130 Å. Switchgrass shows a smooth-to-rough transition in the cell wall surface morphology unlike the diffuse-to-smooth transition of hybrid poplar. Yet, switchgrass and hybrid poplar pretreated under the same experimental conditions result in pretreated switchgrass producing higher glucose yields (~76 wt %) than pretreated hybrid poplar (~60 wt %). This observation shows that other aspects like cellulose allomorph transitions, cellulose accessibility, cellular biopolymer spatial distribution, and enzyme–substrate interactions may be more critical in governing the enzymatic hydrolysis efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

BERT Non-Destructively Probes the Microstructure of Dissimilar Welds [Poster]

Energy-resolved neutron imaging (ERNI) utilizes contrast provided by diffraction. Microstructure with >100µm grains as in cast, annealed or welded materials is difficult to characterize by X-ray or electron-based methods $\Rightarrow$ Well-suited for neutron Bragg-edge radiography. BERT was applied to dissimilar welds of Inconel on steel produced by additive manufacturing. Viewing the sample at time-of-flight/energy/wavelength where a single grain orientation dominates the attenuation allows to map grain orientations. Similarly to electron-backscatter diffraction (EBSD) but on cm length scales and through-thickness. Combined with texture measurements on the HIPPO instrument, identifying major grain orientations, 2D and 3D grain orientation maps are feasible. Results can guide development of thermo-mechanical treatment avoiding or introducing such microstructures, characterize dissimilar welds, interpretation of acoustic signals for quality control, guide destructive examination with X-rays/electrons, or provide data for codes predicting such microstructures.

36 MATERIALS SCIENCE↗
DOE OSTI2018

X-ray characterization of atomistic defects causing irradiation creep of SIC

Silicon carbide (SiC) fiber–reinforced SiC matrix composites have been widely studied for use in developing an accident-tolerant fuel (ATF) cladding for light water reactors (LWRs) in recent years because of their superior oxidation and irradiation resistance and low neutron absorption cross section. An important task is the establishment of the thermo-mechanical analysis capability to predict the in-pile performance and failure probability of the cladding. Irradiation creep is known to be a key property in modeling the stress state under irradiation. To better understand the radiation creep mechanism from an atomic point of view, this study conducted synchrotron-based X-ray diffraction (XRD) experiments on SiC neutron-irradiated with and without applied stress at the National Synchrotron Light Source-II (NSLS-II). This report presents progress of the XRD study and future plans. The important finding obtained was that the macroscopic creep strain and strain due to the lattice expansion were similar in case of neutron irradiation at 300°C to 0.1 displacement per atom (dpa), which indicates that the lattice strain is a major source of the transient creep strain.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Spatial and thermal signatures of α and β relaxations in glassy and glacial aliphatic ionic liquids

The competition between Coulomb and van der Waals interactions brings forth unique dynamic features and broad applications to ionic liquids. Herein, we present a combined calorimetric, X-ray diffraction, incoherent elastic, and quasi-elastic neutron scattering study, over a wide temperature range (180–340 K), of the relaxational dynamics of the liquid, supercooled liquid, crystalline, glassy, and glacial states of two model ionic liquids: tributylmethylammonium (a good glass-former) and butyltrimethylammonium (a good crystal-former) cations and the bis(trifluoromethanesulfonyl)imide anion. In both systems, we observed two distinct relaxation processes. Finally, the Q-dependence of the respective relaxation time shows that the α-process is diffusive, while the β-process is modulated by the structure of the liquids.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Structural and dynamic effects of paraoxon binding to human acetylcholinesterase by X-ray crystallography and inelastic neutron scattering

Organophosphorus (OP) compounds, including nerve agents and some pesticides, covalently bind to the catalytic serine of human acetylcholinesterase (hAChE), thereby inhibiting acetylcholine hydrolysis necessary for efficient neurotransmission. Oxime antidotes can reactivate the OP-conjugated hAChE, but reactivation efficiency can be low for pesticides, such as paraoxon (POX). Understanding structural and dynamic determinants of OP inhibition and reactivation can provide insights to design improved reactivators. Here, in this study, X-ray structures of hAChE with unaged POX, with POX and oximes MMB4 and RS170B, and with MMB4 are reported. A significant conformational distortion of the acyl loop was observed upon POX binding, being partially restored to the native conformation by oximes. Neutron vibrational spectroscopy combined with molecular dynamics simulations showed that picosecond vibrational dynamics of the acyl loop soften in the ~20–50 cm –1 frequency range. The acyl loop structural perturbations may be correlated with its picosecond vibrational dynamics to yield more comprehensive template for structure-based reactivator design.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

The Neutron Macromolecular Crystallography Instruments at Oak Ridge National Laboratory: Advances, Challenges, and Opportunities

The IMAGINE and MaNDi instruments, located at Oak Ridge National Laboratory High Flux Isotope Reactor and Spallation Neutron Source, respectively, are powerful tools for determining the positions of hydrogen atoms in biological macromolecules and their ligands, orienting water molecules, and for differentiating chemical states in macromolecular structures. The possibility to model hydrogen and deuterium atoms in neutron structures arises from the strong interaction of neutrons with the nuclei of these isotopes. Positions can be unambiguously assigned from diffraction studies at the 1.5–2.5 Å resolutions, which are typical for protein crystals. Neutrons have the additional benefit for structural biology of not inducing radiation damage to protein crystals, which can be critical in the study of metalloproteins. Here we review the specifications of the IMAGINE and MaNDi beamlines and illustrate their complementarity. IMAGINE is suitable for crystals with unit cell edges up to 150 Å using a quasi-Laue technique, whereas MaNDi provides neutron crystallography resources for large unit cell samples with unit cell edges up to 300 Å using the time of flight (TOF) Laue technique. The microbial culture and crystal growth facilities which support the IMAGINE and MaNDi user programs are also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Thermal cycling induced alteration of the stacking order and spin-flip in the room temperature van der Waals magnet Fe 5 GeTe 2

The magnetic properties of the quasi-two-dimensional van der Waals magnet Fe 5–δ GeTe 2 (F5GT), which has a high ferromagnetic ordering temperature T C ~315 K, remain to be better understood. It has been demonstrated that the magnetization of F5GT is sensitive to both the Fe deficiency δ and the thermal-cycling history. Here, we investigate the structural and magnetic properties of F5GT single crystals with a minimal Fe deficiency (|δ |≤ 0.1), utilizing combined x-ray and neutron scattering techniques. Herein our study reveals that the quenched F5GT single crystals experience an irreversible, first-order transition at T S ~110 K upon first cooling, where the stacking order partly or entirely converts from ABC-stacking order to AA-stacking order. Importantly, the magnetic properties, including the magnetic moment direction and the enhanced T C after the thermal cycling, are intimately related to the alteration of the stacking order. Our work highlights the significant influence of the lattice symmetry to the magnetism in F5GT.

2-dimensional systems↗
DOE OSTI2016

Investigating the effect of zirconium oxide microstructure on corrosion performance: a comparison between neutron, proton, and nonirradiated oxides - 2016-0069

Scanning precession electron diffraction in the transmission electron microscope has been used to simultaneously map the phase, orientation, and grain morphology of oxides formed on Zircaloy-2 after three and six cycles in a boiling water reactor in unprecedented detail. For comparison, a region of a preoxidized autoclave-formed oxide was also proton-irradiated at the Dalton Cumbrian Facility. The proton irradiation was observed to cause additional stabilization of the tetragonal phase that was attributed to the stabilizing effect of irradiation- induced defects in the oxide. In the reactor-formed oxides, no extra stabilization of the tetragonal grains was observed under neutron irradiation, as indicated by the similar tetragonal phase fraction and transformation twin-boundary distributions between the nonirradiated and reactor-formed oxides. It is suggested that the damage rate is too low in the newly formed oxide to cause significant stabilization of the tetragonal phase. This technique also reveals that the oxide formed under reactor conditions has a more heterogeneous microstructure, and the growth of well-oriented columnar monoclinic grains is significantly reduced compared with a nonirradiated oxide. High-angle annular dark-field scanning transmission electron microscopy also revealed the development of extensive networks of intergranular porosity and eventually grain de-cohesion in the reactor-formed oxides. These results suggest that the tetragonal-monoclinic transformation is not responsible for the accelerated corrosion exhibited under reactor conditions. It is proposed that the usual out-of-reactor oxide growth and nucleation processes are significantly modified under reactor conditions, resulting in a more heterogeneous and randomly oriented oxide microstructure with reduced columnar grain growth. It is suggested that this disordered oxide microstructure allows for the formation of extensive intergranular porosity that could lead to accelerated in-reactor corrosion. (authors)

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nanoscopic structure of borosilicate glass with additives for nuclear waste vitrification

In this report we investigated the nanoscopic structure of borosilicate glasses as a host for high-level radioactive liquid waste (HLLW) in the presence of the additives Na 2 O and CaO/ZnO with and without Li 2 O. These additives have been used to lower the glass melting point, suppress the macroscopic phase separation, and increase the chemical durability of glasses. Small-angle neutron scattering was used to elucidate the effect of the additives on the nanoscopic structure along with macro- and atomic-scale observations obtained using neutron imaging and X-ray diffraction, respectively. The borosilicate glass made without Na 2 O formed a microphase-separated structure of SiO 2 - and B 2 O 3 -rich domains approximately 100 nm in size, and the material was homogeneous at length scales up to millimeters. With the addition of increasing amounts of Na 2 O, the domain spacing decreased. Introducing CaO/ZnO additives induced inhomogeneities in the glass, such as void structures several nanometers in size, although the inhomogeneity was suppressed by the coaddition of Li 2 O. These results provide insights into the performance of host glasses for HLLW vitrification. Incorporating HLLW into glasses is likely to cause changes in the nanoscopic structure of host glasses similar to those revealed here.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Advances in utilizing event based data structures for neutron scattering experiments

This article strives to expand on existing work to demonstrate advancements in data processing made available using event mode measurements. Most spallation neutron sources in the world have data acquisition systems that provide event recording. The new science that is enabled by utilizing event mode has only begun to be explored. In the past, these studies were difficult to perform because histograms forced dealing with either large chunks of time or a large number of files. With event based data collection, data can be explored and rebinned long after the measurement has completed. This article will review some of the principles of event data and how the method opens up new possibilities for in situ measurements, highlighting techniques that can be used to explore changes in the data. We also demonstrate the statistical basis for determining data quality and address the challenge of determining how long to measure mid-measurement. Lastly, we demonstrate a model independent method of grouping data via hierarchical clustering methods that can be used to improve calibration, reduction, and data exploration.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2018

Pulsed laser deposition films from a Ba 2 FeMoO 6 target onto SrTiO 3 [001]: Chemical and magnetic inhomogeneity

Pulsed laser deposition films from Ba 2 FeMoO 6 (BFMO) targets onto SrTiO 3 [001] (STO) substrates have been reported previously to have non-zero magnetism at 300 K, a majority of magnetic ordering at 240 K that is less than the 370 K ordering temperature of polycrystalline BFMO, and suppressed saturation magnetization compared to polycrystalline BFMO. To interrogate these previously reported observations of BFMO on STO, here we have used a combination of x-ray diffraction, atomic force microscopy, x-ray and neutron reflectivity, and x-ray photoelectron spectroscopy that shows inhomogeneities. The present results show off-stoichiometry on the A-site by incorporation of Sr from the substrate and on the B-site to have %Fe/%Mo > 1 by evolution of BaMoO 4 . There is an enhanced ordering temperature and magnetic response nearer to the SrTiO 3 interface compared to the air interface. Depth dependent strain and microstructure are needed to explain the magnetic response. Finally, holistic considerations and implications are also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Impact of nano-scale cavities on hydrogen storage and retention in yttrium hydride

Here, in situ synchrotron high-energy x-ray diffraction experiments and detailed transmission electron microscopy (TEM) characterization were conducted on as-fabricated and neutron-irradiated yttrium hydrides. The high-resolution synchrotron x-ray diffraction revealed minor α yttrium and major δ yttrium hydride phases in all specimens. Specimens were subject to heat treatments (heating-cooling cycles), and the intensity of α yttrium partially and completely disappeared in as-fabricated and neutron-irradiated specimens, respectively. The disappearance of α yttrium was unforeseen because hydrogen was expected to leave δ phase, causing an increase in α yttrium diffraction peak intensity. This observation indicated a surplus of hydrogen in the specimens where it was odd for hydride-forming early transition metal elements. The subsequent through-focus TEM characterization discovered nanometric cavities in both as-fabricated and neutron-irradiated yttrium hydride specimens for the first time. Two types of cavities were identified as fabrication-caused and irradiation-induced. The fabrication-caused cavities were associated with regions having linear deformation features, interfaces, and inclusions. The irradiation-induced cavities were observed as being formed isolated in the yttrium hydride phase. The presence of such nanometric cavities was considered as potential hydrogen storage pockets where the overall hydrogen storing capacity of yttrium hydride would be enhanced.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Comparison of short-range order in irradiated dysprosium titanates

Abstract The structural response of Dy 2 TiO 5 oxide under swift heavy ion irradiation (2.2 GeV Au ions) was studied over a range of structural length scales utilizing neutron total scattering experiments. Refinement of diffraction data confirms that the long-range orthorhombic structure is susceptible to ion beam-induced amorphization with limited crystalline fraction remaining after irradiation to 8 × 10 12 ions/cm 2 . In contrast, the local atomic arrangement, examined through pair distribution function analysis, shows only subtle changes after irradiation and is still described best by the original orthorhombic structural model. A comparison to Dy 2 Ti 2 O 7 pyrochlore oxide under the same irradiation conditions reveals a different behavior: while the dysprosium titanate pyrochlore is more radiation resistant over the long-range with smaller degree of amorphization as compared to Dy 2 TiO 5 , the former involves more local atomic rearrangements, best described by a pyrochlore-to-weberite-type transformation. These results highlight the importance of short-range and medium-range order analysis for a comprehensive description of radiation behavior.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Dynamics of water bound to crystalline cellulose

Interactions of water with cellulose are of both fundamental and technological importance. Here, we characterize the properties of water associated with cellulose using deuterium labeling, neutron scattering and molecular dynamics simulation. Quasi-elastic neutron scattering provided quantitative details about the dynamical relaxation processes that occur and was supported by structural characterization using small-angle neutron scattering and X-ray diffraction. We can unambiguously detect two populations of water associated with cellulose. The first is “non-freezing bound” water that gradually becomes mobile with increasing temperature and can be related to surface water. The second population is consistent with confined water that abruptly becomes mobile at ~260 K, and can be attributed to water that accumulates in the narrow spaces between the microfibrils. Quantitative analysis of the QENS data showed that, at 250 K, the water diffusion coefficient was 0.85 ± 0.04 × 10-10 m2sec-1 and increased to 1.77 ± 0.09 × 10-10 m2sec-1 at 265 K. MD simulations are in excellent agreement with the experiments and support the interpretation that water associated with cellulose exists in two dynamical populations. Our results provide clarity to previous work investigating the states of bound water and provide a new approach for probing water interactions with lignocellulose materials.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Observation of the magnetic C 4 phase in Ca 1 - x Na x Fe 2 As 2 and its universality in the hole-doped 122 superconductors

Since its discovery in 2014, the magnetic tetragonal C 4 phase has been identified in a growing number of hole-doped 122 Fe-based superconducting compounds. Exhibiting a unique double-Q magnetic structure and a strong competition with both superconducting and magnetic order parameters, the C 4 phase and the conditions of its formation are of significant interest to understanding the fundamental mechanisms in these materials. Particularly, separating the importance of direct changes to the relative size of hole and electron pockets at the Fermi surface (achieved via charge doping) from the role of structural changes due to differences of ionic radii of dopants is useful to determine the underlying parameter which causes the C 4 instability. Here, we report the discovery of the C 4 phase in a fourth member of the hole-doped 122 materials Ca 1-x Na x Fe 2 As 2 (0.20 ≤ x ≤ 0.50) as determined from neutron and x-ray powder diffraction studies. The maximum of the C 4 dome is observed at x = 0.44 with a reentrant temperature T r = 52 K and an extent of Δx ~ 0.07 in composition. It is observed that for a range of compositions within the C 4 dome (0.40 ≤ x ≤ 0.42), there is a second reentrance (Tr 2 < Tr) where the antiferromagnetic C 2 phase is recovered—a feature previously only seen in Ba 1-x K x Fe 2 As 2 . A phase diagram is presented for Ca 1-x Na x Fe 2 As 2 and compared to the other Na-doped 122's—A 1-x Na x Fe 2 As 2 with A = Ba, Sr, and Ca. Lastly, the structural parameters for these three systems are compared and the importance of the “chemical pressure” due to changing the A-site ion (A = Ba, Sr, Ca) is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗