Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Missions Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Navigation Challenges in the MAVEN Science Phase

The MAVEN spacecraft will explore Mars' upper atmosphere. The primary science phase will last one (Earth) year, during which the spacecraft will be in an elliptical 4.5 hour orbit at an inclination of 75 degrees. The 75 degree inclination results in the orbit periapsis oscillating between +/-75 degrees latitude, thus naturally covering most Mars latitudes during the primary mission. The orbit will be controlled via maneuvers so that the maximum orbit density remains in a density corridor. This results in the MAVEN science phase being in a light aerobraking type orbit of around 160 km for an extended period. In addition, the mission has significantly less tracking data than aerobraking phases of other missions, and even less than other NASA Mars orbiter primary phases. This results in significant challenges for the Navigation Team. They can be summarized as a difficulty in determining the current density profile, which maps into degraded trajectory predictions and less accurate control over the spacecraft location in the targeted density corridor via maneuvers. This paper describes these challenges and the Navigation Team's plans to meet them.

MAVEN↗

Risk-Significant Adverse Condition Awareness Strengthens Assurance of Fault Management Systems

As spaceflight systems increase in complexity, Fault Management (FM) systems are ranked high in risk-based assessment of software criticality, emphasizing the importance of establishing highly competent domain expertise to provide assurance. Adverse conditions (ACs) and specific vulnerabilities encountered by safety- and mission-critical software systems have been identified through efforts to reduce the risk posture of software-intensive NASA missions. Acknowledgement of potential off-nominal conditions and analysis to determine software system resiliency are important aspects of hazard analysis and FM. A key component of assuring FM is an assessment of how well software addresses susceptibility to failure through consideration of ACs. Focus on significant risk predicted through experienced analysis conducted at the NASA Independent Verification & Validation (IV&V) Program enables the scoping of effective assurance strategies with regard to overall asset protection of complex spaceflight as well as ground systems. Research efforts sponsored by NASAs Office of Safety and Mission Assurance (OSMA) defined terminology, categorized data fields, and designed a baseline repository that centralizes and compiles a comprehensive listing of ACs and correlated data relevant across many NASA missions. This prototype tool helps projects improve analysis by tracking ACs and allowing queries based on project, mission type, domain/component, causal fault, and other key characteristics. Vulnerability in off-nominal situations, architectural design weaknesses, and unexpected or undesirable system behaviors in reaction to faults are curtailed with the awareness of ACs and risk-significant scenarios modeled for analysts through this database. Integration within the Enterprise Architecture at NASA IV&V enables interfacing with other tools and datasets, technical support, and accessibility across the Agency. This paper discusses the development of an improved workflow process utilizing this database for adaptive, risk-informed FM assurance that critical software systems will safely and securely protect against faults and respond to ACs in order to achieve successful missions.

IV&V↗

Orbit Determination of the Thermosphere, Ionosphere, Mesosphere, Energetics and Dynamics (TIMED) Mission Using Differenced One-way Doppler (DOWD)Tracking Data from the Tracking and Data Relay Satellite System (TDRSS)

Over an approximately 48-hour period from September 26 to 28,2002, the Thermosphere, Ionosphere, Mesosphere, Energetics and Dynamics (TIMED) mission was intensively supported by the Tracking and Data Relay Satellite System (TDRSS). The TIMED satellite is in a nearly circular low-Earth orbit with a semimajor axis of approximately 7000 km and an inclination of approximately 74 degrees. The objective was to provide TDRSS tracking support for orbit determination (OD) to generate a definitive ephemeris of 24-hour duration or more with a 3-sigma position error no greater than 100 meters, and this tracking campaign was successful. An ephemeris was generated by Goddard Space Flight Center (GSFC) personnel using the TDRSS tracking data and was compared with an ephemeris generated by the Johns Hopkins University's Applied Physics Lab (APL) using TIMED Global Positioning System (GPS) data. Prior to the tracking campaign OD error analysis was performed to justify scheduling the TDRSS support.

Marr, Greg C.↗

Mean sea surface and variability of the Gulf of Mexico using Geosat altimetry data

Geosat Exact Repeat Mission (ERM) altimetric measurements of the sea surface height in the Gulf of Mexico are used to determine the mean sea surface height with respect to the ellipsoid and mesoscale variability along Geosat ground tracks in the gulf for the time period from November 8, 1986 to November 25, 1988. A mean surface generated using the Geosat ERM along-track mean is calculated and contrasted with a previously derived mean surface determined using GEOS 3 and Seasat crossover differences. This provides a first look at the variability in the mean between the time periods of 1987-1988 and 1975-1978. In addition, the along-track mesoscale variability time series has been produced from the Geosat ERM data set by using a robust orbit-error removal algorithm to determine the variability of the sea-surface height with respect to the along-track mean. Good qualitative and quantitative agreement with previous in situ observations in the region is found. This study demonstrates the potential of satellite altimetry for oceanographic studies of the Gulf of Mexico.

Leben, Robert R.↗

CLEAR: Communications Link Expert Assistance Resource

Communications Link Expert Assistance Resource (CLEAR) is a real time, fault diagnosis expert system for the Cosmic Background Explorer (COBE) Mission Operations Room (MOR). The CLEAR expert system is an operational prototype which assists the MOR operator/analyst by isolating and diagnosing faults in the spacecraft communication link with the Tracking and Data Relay Satellite (TDRS) during periods of realtime data acquisition. The mission domain, user requirements, hardware configuration, expert system concept, tool selection, development approach, and system design were discussed. Development approach and system implementation are emphasized. Also discussed are system architecture, tool selection, operation, and future plans.

Hull, Larry G.↗

Deciding Where in the World to Go on Mars and Why

This viewgraph presentation provides information on the selection process for determining the landing sites for the Mars Exploration Rovers (MERs) launched in 2003. The presentation covers the mission, instruments, and science goals of the MERs, and lists landing site constraints. The profiles of candidate landing sites include images and characteristics for each. Marsoweb, an Internet resource for analyzing data from Mars missions, is also profiled.

Deardorff, Glenn↗

MODIS Reflective Solar Bands Calibration Improvements for Collection 7

Calibration of Terra and Aqua MODIS reflective solar bands (RSB) has evolved significantly since the launch of the first MODIS instrument on the Terra satellite more than 21 years ago. In NASA’s current Collection 6 and 6.1 Level 1B products (C6/C6.1 L1B), the RSB calibration algorithm continues to rely primarily on the onboard solar diffuser to calibrate the instrument gain. Lunar observations are used to track on-orbit changes in the response versus scan angle (RVS), and data from pseudo-invariant desert sites are used to apply adjustments to the gain and RVS calibration for select bands. The resulting reflectance products have in general shown a very stable performance. In recent years, some performance degradation has been noted for a few bands and algorithm changes have been tested to further improve the calibration accuracy for the upcoming Collection 7 (C7) L1B reprocess. In this paper, we present the MODIS RSB calibration improvements that will be included in C7. Major improvements include: applying polarization correction to the desert data before using it to generateRVS for Terra bands 8, 9, 3, and 10; using ocean scene data and an interband calibration approach to correct for long-term drift of Terra bands 11 and 12; applying an updated crosstalk correction to Terra SWIR bands over the entire mission; and using data from deep convective clouds in Terra SWIR band calibration, including the addition of time-dependent RVS for bands 5 and 26. All other minor calibration changes are also covered. Overall, the reflectance differences at nadir between C6.1 and C7 are within a few percent, though the differences increase in some cases at large scan angles. The Terra visible (3, 8-12) and SWIR bands (5-7, 26) have the most significant improvements. For all other Terra bands and all Aqua bands, the C7-C6.1 differences are mostly within 1%

MODIS↗

Space Launch System Artemis I CubeSats: SmallSat Vanguards of Exploration, Science and Technology

When NASA’s Space Launch System (SLS) rocket launches in 2021 with the Orion crew vehicle, it will lay the foundation for NASA’s goal of landing the first woman and the next man on the Moon as part of the Artemis program. This first flight—Artemis I—will also mark a milestone for smallsats. Thirteen6U CubeSats are manifested on the Artemis I flight, the first fleet of CubeSats carried as a ride share opportunity to deep space.(NASA’s first CubeSats to deep space, the twin Mars Cube One [MarCO] spacecraft, were an integral part of the InSight Mars lander mission). The Artemis I CubeSat manifest represents a diverse collection of smallsats performing an array of science missions and technology demonstrations. Payloads from NASA, international partners, academia and industry will execute a variety of experiments. Several smallsats will perform lunar-focused missions that may return data that addresses Strategic Knowledge Gaps (SKGs) in the agency’s lunar exploration program. Indeed, the Artemis I CubeSats will be in the vanguard of the agency’s 21st-century lunar program. The Artemis I missions will produce data to support space radiation awareness,crewed landings and in-situ resource utilization, helping to support a sustained human lunar presence. Several of the Artemis I CubeSats are demonstrating new technologies, including propulsion capabilities. Among the Artemis I CubeSats are three selected through NASA’s Cube Quest Challenge, part of the Centennial Challenges program. These three missions will compete for prize money while meeting specific technical development goals. Payloads from the Japanese and Italian space agencies provide an early opportunity for international involvement in the Artemis program. Student involvement in almost half of the payloads allow STEM engagement with NASA’s Artemis program. The SLS Block 1 vehicle for the Artemis I flight is manufactured with several elements delivered to Kennedy Space Center (KSC) and being prepared for stacking and integration. The new-development of the program, the 212-footcore stage with its four RS-25 engines installed is currently at Stennis Space Center (SSC) for “green run” testing. Following the green run test campaign, the stage will ship to KSC, where it will be integrated with the rest of the vehicle, including the upper stage adapter, where the Artemis I smallsats will be housed.

Kimberly F Robinson↗

Global Geologic Map of Europa

Europa, with its indications of a sub-ice ocean, is of keen interest to astrobiology and planetary geology. Knowledge of the global distribution and timing of Europan geologic units is a key step for the synthesis of data from the Galileo mission, and for the planning of future missions to the satellite. The first geologic map of Europa was produced at a hemisphere scale with low resolution Voyager data. Following the acquisition of higher resolution data by the Galileo mission, researchers have identified surface units and determined sequences of events in relatively small areas of Europa through geologic mapping using images at various resolutions acquired by Galileo's Solid State Imaging camera. These works provided a local to subregional perspective and employed different criteria for the determination and naming of units. Unified guidelines for the identification, mapping and naming of Europan geologic units were put forth by and employed in regional-to-hemispheric scale mapping which is now being expanded into a global geologic map. A global photomosaic of Galileo and Voyager data was used as a basemap for mapping in ArcGIS, following suggested methodology of all-stratigraphy for planetary mapping. The following units have been defined in global mapping and are listed in stratigraphic order from oldest to youngest: ridged plains material, Argadnel Regio unit, dark plains material, lineaments, disrupted plains material, lenticulated plains material and Chaos material.

Doggett, T.↗

Explore Air Quality from NASA Satellite Data

Space-borne earth observation has been important to monitor the earth condition and played acritical role in validating other instruments or modeling's outputs. However, the data from satellite earth observation are usually very complex in terms of science contents, formats, and spatiotemporal granularities, making them difficult to use from many aspects. NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), one of the 12 official NASA data centers, archives and distributes rich collections of data from multiple satellite missions and model results. The GES DISC is also the official archive center for data from the Ozone Monitoring Instrument (OMI) aboard NASA's Aura mission since 2004. Recently, the GES DISChas been evolving and improving its data management and services in order to promote NASA data to be easily discovered and accessed, as well as to facilitate interoperability. We'll show in this presentation how to explore and analyze NASA earth observation data for air quality through a suite of user-friendly tools - from Giovanni to ArcGIS, demonstrating in using this set of tools prepares us to serve the Sentinel 5P TROPOMI to the community.

Wei, J.↗

Material Damping Experiments at Cryogenic Temperatures

A unique experimental facility has been designed to measure damping of materials at cryogenic temperatures. The test facility pays special attention to removing other sources of damping in the measurement by avoiding frictional interfaces, decoupling the test specimen from the support system, and by using a non-contacting measurement device; Damping data is obtained for materials (AI, GrEp, Be, Fused Quartz), strain amplitudes (less than 10-6 ppm), frequencies (20Hz-330Hz) and temperatures (20K-293K) relevant to future precision optical space missions. The test data shows a significant decrease in viscous damping at cryogenic temperatures and can be as low as 10-4%, but the amount of the damping decrease is a function of frequency and material. Contrary to the other materials whose damping monotonically decreased with temperature, damping of Fused Quartz increased substantially at cryo, after reaching a minimum at around l50 K. The damping is also shown to be insensitive to strain for low strain levels. At room temperatures, the test data correlates well to the analytical predictions of the Zener damping model. Discrepancies at cryogenic temperatures between the model predictions and the test data are observed.

cryogenic↗

Modifying the Heliophysics Data Policy to Better Enable Heliophysics Research

The Heliophysics (HP) Science Data Management Policy, adopted by HP in June 2007, has helped to provide a structure for the HP data lifecycle. It provides guidelines for Project Data Management Plans and related documents, initiates Resident Archives to maintain data services after a mission ends, and outlines a route to the unification of data finding, access, and distribution through Virtual observatories. Recently we have filled in missing pieces that assure more coherence and a home for the VxOs (through the 'Heliophsyics Data and Model Consortium'), and provide greater clarity with respect to long term archiving. In particular, the new policy which has been vetted with many community members, details the 'Final Archives' that are to provide long-term data access. These are distinguished from RAs in that they provide little additional service beyond servicing data, but critical to their success is that the final archival materials include calibrated data in useful formats such as one finds in CDAWeb and various ASCII or FITS archives. Having a clear goal for legacy products, to be detailed as part of the Mission Archives Plans presented at Senior Reviews, will help to avoid the situation so common in the past of having archival products that preserve bits well but not readily usable information. We hope to avoid the need for the large numbers of 'data upgrade' projects that have been necessary in recent years.

Hayes, Jeffrey↗

Properties of 249 δ Scuti Variable Star Candidates Observed During the NASA K2 Mission

In the second phase of the NASA Kepler mission (K2), the Kepler spacecraft observed fields along the ecliptic plane for about 80 days each to search for planetary transits and monitor stellar variability. We analyzed the light curves of thousands of main-sequence stars observed as part of the Kepler Guest Observer program. Here we summarize the statistics of discovery and properties of the pulsation amplitude spectra for 249 δ Scuti variable stars or candidates observed during K2 Campaigns 4 through 17. δ Sct variables are core or shell hydrogen-burning stars about twice as massive as the Sun, pulsating in many simultaneous radial and non-radial modes, with periods of about 2 h. The growing collection of long time-series high signal-to-noise photometric data from space missions such as Kepler, combined with constraints from ground and space-based data, will be useful to constrain the interior structure of these types of variables. We hope that this list of δ Sct candidates observed by Kepler will be useful as a starting point for identifying promising targets for asteroseismic investigations.

79 ASTRONOMY AND ASTROPHYSICS↗

Crew health status and monitoring summary - The second manned Skylab mission

The evaluation of available medical data to determine the health status of the Skylab 3 crew members is discussed. The utilization of raw data from medical experiments during the course of the mission as a source of near-real time criteria for monitoring crew health is described. The percentage change of selected metabolic parameters, including calorie intake, Na intake, K intake, urine output, water intake, and body weight, from their pre-flight values, vectorcardiographic data, and results of the lower body negative pressure experiment provided a core of information upon which clinical judgements could be made. Minor clinical problems occurring during the mission are outlined.

Buchanan, P.↗

Use of a Small Unmanned Aircraft System for Autonomous Fire Spotting at the Great Dismal Swamp

This paper describes the results of a set of experiments and analyses conducted to evaluate the capability of small unmanned aircraft systems (sUAS) to spot nascent fires in the Great Dismal Swamp (GDS) National Wildlife Refuge. This work is the result of a partnership between the National Aeronautics and Space Administration and the US Fish and Wildlife service specifically to investigate sUAS usage for fire-spotting. The objectives of the current effort were to: 1) Determine suitability and utility of low-cost Small Unmanned Aircraft Systems (sUAS) to detect nascent fires at GDS; 2) Identify and assess the necessary National Airspace System (NAS) integration issues; and 3) Provide information to GDS and the community on system requirements and concepts-of-operation (CONOPS) for conducting fire detection/support mission in the National Airspace and (4) Identify potential applications of intelligent autonomy that would enable or benefit this high-value mission. In addition, data on the ability of various low-cost sensors to detect smoke plumes and fire hot spots was generated during the experiments as well as identifying a path towards a future practical mission utility by using sUAS in beyond visual-line-of-sight operation in the National Airspace System (NAS).

Logan, Michael J.↗

NASA Development of Hardware for Life Support Systems in Cis Lunar and Surface Habitats

Sustained human presence requires the ability to survive with a minimal Earth supply chain and minimal communications from Earth. NASA is working on mission platforms to aggregate ECLS functions into a cis lunar and lunar surface architectures to demonstrate Mars forward capabilities and reduce the risk for human missions to Mars. This means the Environmental Control and Life Support (ECLS) technologies in the vehicle architecture will need to recover air and water from human and consumable waste products to support humans for short and long duration missions. NASA is developing ECLS technologies for Air Revitalization, Water Recovery and Management, Waste Management and Environmental Monitoring. Implementation of these technologies on microgravity and partial gravity platforms will collect component and system data on manned missions to increase the reliability needed for mission beyond Low Earth Orbit.

Imelda C. Stambaugh↗

Onboard Science and Applications Algorithm for Hyperspectral Data Reduction

An onboard processing mission concept is under development for a possible Direct Broadcast capability for the HyspIRI mission, a Hyperspectral remote sensing mission under consideration for launch in the next decade. The concept would intelligently spectrally and spatially subsample the data as well as generate science products onboard to enable return of key rapid response science and applications information despite limited downlink bandwidth. This rapid data delivery concept focuses on wildfires and volcanoes as primary applications, but also has applications to vegetation, coastal flooding, dust, and snow/ice applications. Operationally, the HyspIRI team would define a set of spatial regions of interest where specific algorithms would be executed. For example, known coastal areas would have certain products or bands downlinked, ocean areas might have other bands downlinked, and during fire seasons other areas would be processed for active fire detections. Ground operations would automatically generate the mission plans specifying the highest priority tasks executable within onboard computation, setup, and data downlink constraints. The spectral bands of the TIR (thermal infrared) instrument can accurately detect the thermal signature of fires and send down alerts, as well as the thermal and VSWIR (visible to short-wave infrared) data corresponding to the active fires. Active volcanism also produces a distinctive thermal signature that can be detected onboard to enable spatial subsampling. Onboard algorithms and ground-based algorithms suitable for onboard deployment are mature. On HyspIRI, the algorithm would perform a table-driven temperature inversion from several spectral TIR bands, and then trigger downlink of the entire spectrum for each of the hot pixels identified. Ocean and coastal applications include sea surface temperature (using a small spectral subset of TIR data, but requiring considerable ancillary data), and ocean color applications to track biological activity such as harmful algal blooms. Measuring surface water extent to track flooding is another rapid response product leveraging VSWIR spectral information.

Chien, Steve A.↗

Exploring Synergistic Tools from NASA Satellite Data for Air Quality

Space-borne earth observation has been important to monitor the earth condition and played a critical role in validating other instruments or modeling's outputs. However, the data from satellite earth observation are usually very complex in terms of science contents, formats, and spatiotemporal granularities, making them difficult to use from many aspects. NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), one of the 12 official NASA data centers, archives and distributes rich collections of data from multiple satellite missions and model results. The GES DISC is also the official archive center for data from the Ozone Monitoring Instrument (OMI) aboard NASA's Aura mission since 2004. Recently, the GES DISC has been evolving and improving its data management and services in order to promote NASA data to be easily discovered and accessed, as well as to facilitate interoperability. We'll show in this presentation how to explore and analyze NASA earth observation data for air quality through a suite of user-friendly tools - from Worldview to Giovanni, demonstrating in using this set of tools prepares us to serve the Sentinel 5P TROPOMI to the community.

air quality↗