Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mathematical Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Development of a Model and Computer Code to Describe Solar Grade Silicon Production Processes

Mathematical models and computer codes based on these models, which allow prediction of the product distribution in chemical reactors for converting gaseous silicon compounds to condensed-phase silicon were developed. The following tasks were accomplished: (1) formulation of a model for silicon vapor separation/collection from the developing turbulent flow stream within reactors of the Westinghouse (2) modification of an available general parabolic code to achieve solutions to the governing partial differential equations (boundary layer type) which describe migration of the vapor to the reactor walls, (3) a parametric study using the boundary layer code to optimize the performance characteristics of the Westinghouse reactor, (4) calculations relating to the collection efficiency of the new AeroChem reactor, and (5) final testing of the modified LAPP code for use as a method of predicting Si(1) droplet sizes in these reactors.

Srivastava, R.↗

A life cycle cost economics model for automation projects with uniformly varying operating costs

The described mathematical model calculates life-cycle costs for projects with operating costs increasing or decreasing linearly with time. The cost factors involved in the life-cycle cost are considered, and the errors resulting from the assumption of constant rather than uniformly varying operating costs are examined. Parameters in the study range from 2 to 30 years, for project life; 0 to 15% per year, for interest rate; and 5 to 90% of the initial operating cost, for the operating cost gradient. A numerical example is presented.

Remer, D. S.↗

Model Of Turbulent Gas Eddies Containing Drops

Report proposes development of mathematical model of turbulent eddy of gas containing drops of liquid fuel. Closely related to those described in "Turbulence and Evaporation in Clusters of Drops" (NPO-17323) and "Effects of Turbulence on Ignition" (NPO-17335). Goal to initiate development of theory of interactions of several eddies containing drops during evaporation, ignition, and combustion of liquid fuels injected into combustors. Numerical results of analysis given as plot of nondimensionalized evaporation time versus initial ratio of air mass to fuel mass.

Bellan, Josette↗

Simplified Modeling Of A Helicopter

Report discusses development of minimum-complexity mathematical model of helicopter for use in flight simulator. Development motivated by computational delays, costs, long development times, and inflexibility of sophisticated models now in use. New model overcomes these disadvantages and provides better engineering understanding of those features pertaining to handling qualities apparent to pilot who uses simulator.

Heffley, Robert K.↗

Model Of Neural Network With Creative Dynamics

Paper presents analysis of mathematical model of one-neuron/one-synapse neural network featuring coupled activation and learning dynamics and parametrical periodic excitation. Demonstrates self-programming, partly random behavior of suitable designed neural network; believed to be related to spontaneity and creativity of biological neural networks.

Zak, Michail↗

Finite-Element Modeling For Structural Analysis

Report presents study of finite-element mathematical modeling as used in analyzing stresses and strains at joints between thin, shell-like components (e.g., ducts) and thicker components (e.g., flanges or engine blocks). First approach uses global/local model to evaluate system. Provides correct total response and correct representation of stresses away from any discontinuities. Second approach involves development of special transition finite elements to model transitions between shells and thicker structural components.

Min, J. B.↗

Parachute Drag Model

DTV-SIM is a computer program that implements a mathematical model of the flight dynamics of a missile-shaped drop test vehicle (DTV) equipped with a multistage parachute system that includes two simultaneously deployed drogue parachutes and three main parachutes deployed subsequently and simultaneously by use of pilot parachutes. DTV-SIM was written to support air-drop tests of the DTV/parachute system, which serves a simplified prototype of a proposed crew capsule/parachute landing system.

Cuthbert, Peter↗

A Modification and Analysis of Lagrangian Trajectory Modeling and Granular Dynamics of Lunar Dust Particles

A previously developed mathematical model is amended to more accurately incorporate the effects of lift and drag on single dust particles in order to predict their behavior in the wake of high velocity gas flow. The model utilizes output from a CFD or DSMC simulation of exhaust from a rocket nozzle hot gas jet. An extension of the Saffman equation for lift based on the research of McLaughlin (1991) and Mei (1992) is used, while an equation for the Magnus force modeled after the work of Oesterle (1994) and Tsuji et al (1985) is applied. A relationship for drag utilizing a particle shape factor (phi = 0.8) is taken from the work of Haider and Levenspiel (1989) for application to non-spherical particle dynamics. The drag equation is further adjusted to account for rarefaction and compressibility effects in rarefied and high Mach number flows according to the work of Davies (1945) and Loth (2007) respectively. Simulations using a more accurate model with the correction factor (Epsilon = 0.8 in a 20% particle concentration gas flow) given by Richardson and Zaki (1954) and Rowe (1961) show that particles have lower ejection angles than those that were previously calculated. This is more prevalent in smaller particles, which are shown through velocity and trajectory comparison to be more influenced by the flow of the surrounding gas. It is shown that particles are more affected by minor changes to drag forces than larger adjustments to lift forces, demanding a closer analysis of the shape and behavior of lunar dust particles and the composition of the surrounding gas flow.

Long, Jason M.↗

Protection of rubbers against aging with the use of structural, diffusion and kinetic effects

Processes of rubber aging in the different kinetic modes and mathematical models of the processes including aging and destruction processes under extreme conditions have been studied. The aging process for rubbers as thermodynamically open nonlinear systems has also been considered in the paper. It has been revealed that the aging process can be controlled by the internal physical-chemical processes organization and by creation of external influences (by organization of thermodynamic forces and flows). According to the Onsager principle, in certain conditions of aging the conjugation of thermodynamic forces and flows is possible. The diffusion and structural aspects of aging in elastomeric rubbers and articles thereof have been considered. The composite antiaging systems of prolonged action based on the use of microparticles with a saturated solution of the antiagers migrating into an elastomeric matrix at the exploitation have been proposed.

36 MATERIALS SCIENCE↗

Optical layer development for thin films thermal conductivity measurement by pulsed photothermal radiometry

Measurement of thermal conductivity and volumetric specific heat of optically transparent thin films presents a challenge for optical-based measurement methods like pulsed photothermal radiometry. We present two approaches: (i) addition of an opaque optical layer to the surface and (ii) approximate correction of the mathematical model to incorporate semitransparency of the film. Different single layer and multilayer additive optical layers were tested. The materials of the optical layers were chosen according to analysis and measurement of their optical properties: emissivity and absorption coefficient. Presented are thermal properties’ measurement results for 6 different thin films with wide range of thermal conductivity in three configurations of surface: as deposited, added Ti layer, and added Ti/TiAlSiN layer. Measurements were done in dependence on temperature from room temperature to 500 °C. The obtained thermal effusivity evolution in time after the laser pulse shows different effects of the surface layers: apparent effusivity change and time delay. Suitability of different measurement configurations is discussed and results of high temperature testing of different optical layers are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of 1918 PB1-F2 expression on influenza A virus infection kinetics

Relatively little is known about the viral factors contributing to the lethality of the 1918 pandemic, although its unparalleled virulence was likely due in part to the newly discovered PB1-F2 protein. This protein, while unnecessary for replication, increases apoptosis in monocytes, alters viral polymerase activity in vitro, and produces enhanced inflammation and increased secondary pneumonia in vivo. However, the effects the PB1-F2 protein have in vivo remain unclear. To address the mechanisms involved, we intranasally infected groups of mice with either influenza A virus PR8 or a genetically engineered virus that expresses the 1918 PB1-F2 protein on a PR8 background, PR8-PB1-F2(1918). Mice inoculated with PR8 had viral concentrations peaking at 72 hours, while those infected with PR8-PB1-F2(1918) reached peak concentrations earlier, 48 hours. Mice given PR8-PB1-F2(1918) also showed a faster decline in viral loads. We fit a mathematical model to these data to estimate parameter values and select the best model. This model supports a lower viral clearance rate and higher infected cell death rate with the PR8-PB1-F2(1918) virus, although the viral production rate may also be higher. We hypothesize that the higher PR8-PB1-F2(1918) viral titers early in an infection are due to both an increase in viral production with decreased viral clearance, and that the faster decline in the later stages of infection result from elevated cell death rates. We discuss the implications these mechanisms have during an infection with a virus expressing a virulent PBI-F2 on the possibility of a pandemic and on the importance of antiviral treatments.

59 BASIC BIOLOGICAL SCIENCES↗

Estimation of the HIV-1 infection rate and the basic reproductive ratio

This paper proposes and analyzes an alternative method to estimate important parameters of the HIV-1 infection: the infection rate and the basic reproductive ratio (in the presence and absence of the immune response). These parameters are of great relevance, impacting on the infection chronicity. The method consists in comparing clinical data in the chronic stage with predicted equilibrium points of a mathematical model which describes the dynamics of HIV-1 in the acute infection phase. The fact that the method uses only clinical data relating to the chronic stage is an important aspect since most patients are diagnosed at this stage, and thus only have data available for this stage. A comparison between the proposed method and other estimation methods, as well as between numerical simulations, is presented and the results are quite satisfactory. In addition, by applying the proposed method for data of 31 patients, we estimate the basic reproductive ratio in the presence of the immune response and the HIV-1 infection rate for which we obtained a median of 1.95 (IQR 0.55) and 1.96×10{sup −5} mm{sup 3} virions{sup −1} day{sup −1} (IQR 3.52×10{sup −5}), respectively.

60 APPLIED LIFE SCIENCES↗

Sensitivity of absorption spectra to surface segregation in InGaN/GaN quantum well structures

We investigate the influence of the indium surface segregation on absorption spectra in InGaN/GaN quantum well structures having different indium amount. Results of the mathematical modeling show that such influence is more pronounced in quantum well structures with high indium amounts. The origin of this effect is related to the interplay between the indium surface segregation and internal electrostatic fields. Our theoretical analysis is performed using semiconductor Bloch equations within the Hartree-Fock approximation including into consideration excitonic effects. Results of the global sensitivity analysis evidence that the influence of the indium surface segregation is less than one order of magnitude in comparison with the impact of the quantum-well width and indium molar fraction. Also, the influence of the indium surface segregation is not the same for each interface of the quantum well.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of optical properties of multilayer dielectric structures using prism-coupling technique

A method based on resonant excitation of waveguide modes with a prism coupler is proposed for measuring the thickness and refractive index of thin-film layers in multilayer dielectric structures. The peculiarities of reflection of TE- and TM-polarised light beams from a structure comprising eleven alternating layers of zinc sulfide (ZnS) and magnesium barium fluoride (MgBaF{sub 4}), whose thicknesses are much less than the wavelength of light, are investigated. Using the mathematical model developed, we have calculated the coefficients of reflection of collimated TE and TM light beams from a multilayer structure and determined the optical constants and thicknesses of the structure layers. The refractive indices of the layers, obtained for TE and TM polarisation of incident light, are in good agreement. The thicknesses of ZnS and MgBaF{sub 4} layers, found for different polarisations, coincide with an accuracy of ±1%. Thus, we have demonstrated for the first time that the prism-coupling technique allows one to determine the optical properties of thin-film structures when the number of layers in the structure exceeds ten layers. (integrated optics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantifying the basic reproduction number and underestimated fraction of Mpox cases worldwide at the onset of the outbreak

In 2022, there was a global resurgence of mpox, with different clinical-epidemiological features compared with previous outbreaks. Sexual contact was hypothesized as the primary transmission route, and the community of men having sex with men (MSM) was disproportionately affected. Because of the stigma associated with sexually transmitted infections, the real burden of mpox could be masked. We quantified the basic reproduction number (R 0 ) and the underestimated fraction of mpox cases in 16 countries, from the onset of the outbreak until early September 2022, using Bayesian inference and a compartmentalized, risk-structured (high-/low-risk populations) and two-route (sexual/non-sexual transmission) mathematical model. Machine learning (ML) was harnessed to identify underestimation determinants. Estimated R 0 ranged between 1.37 (Canada) and 3.68 (Germany). The underestimation rates for the high- and low-risk populations varied between 25–93% and 65–85%, respectively. The estimated total number of mpox cases, relative to the reported cases, is highest in Colombia (3.60) and lowest in Canada (1.08). In the ML analysis, two clusters of countries could be identified, differing in terms of attitudes towards the 2SLGBTQIAP+ community and the importance of religion. Given the substantial mpox underestimation, surveillance should be enhanced, and country-specific campaigns against the stigmatization of MSM should be organized, leveraging community-based interventions.

60 APPLIED LIFE SCIENCES↗

Economic analysis of model validation for a challenge problem

It is now commonplace for engineers to build mathematical models of the systems they are designing, building, or testing. And, it is nearly universally accepted that phenomenological models of physical systems must be validated prior to use for prediction in consequential scenarios. Yet, there are certain situations in which testing only or no testing and no modeling may be economically viable alternatives to modeling and its associated testing. This paper develops an economic framework within which benefit–cost can be evaluated for modeling and model validation relative to other options. The development is presented in terms of a challenge problem. As a result, we provide a numerical example that quantifies when modeling, calibration, and validation yield higher benefit–cost than a testing only or no modeling and no testing option.

42 ENGINEERING↗

Calculation of the Present Value of Separative Work for Uranium Isotopes

An economics-mathematical model for performing analytical calculations of the present value of separative work for uranium isotopes in a separation plant currently being designed using gas centrifuge technology is examined. Analytical expressions are obtained for the present value of the separative work, the internal rate of return, and the payback period of the separation plant as a function of its main engineering and economics parameters – productivity (capacity), capital investment, and operating expenses. Calculations of these criteria for investment efficiency are presented for a wide range of initial data. It is shown that the calculation of the present value of separative work must be performed in a complex with other investment efficiency criteria in order to determine their optimal combination.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Identification of slip surface location by TLS-GPS datafor landslide mitigation case study: Ciloto-Puncak, West Java

Landslide can prevented by understanding the direction of movement to the safety evacuation track or slip surface location to hold avalanches. Slip surface is separating between stable soil and unstable soil in the slope. The slip surface location gives information about stable material depth. The information can be utilize to mitigate technical step, such as pile installation to keep construction or settlement safe from avalanches.There are two kinds landslide indicators which are visualization and calculation. By visualization, landslide identified from soil crack or scarp. Scarp is a scar of exposed soil on the landslide. That identification can be done by Terrestrial Laser Scanner (TLS) Image. Shape of scarp shows type of slip surface, translation or rotational. By calculation, kinematic and dynamic mathematic model will give vector, velocity and acceleration of material movement. In this calculation need velocity trend line at GPS point from five GPS data campaign. From intersection of trend lines it will create curves or lines of slip surface location. The number of slip surface can be known from material movement direction in landslide zone.Ciloto landslide zone have complicated phenomenon because that zone have influence from many direction of ground water level pressure. The pressure is causes generating several slip surface in Ciloto zone. Types of Ciloto slip surface have mix between translational and rotational type.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗