Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MIRROR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Fabrication methods for high reflectance dielectric-metal point contact rear mirror for optoelectronic devices

The patterned dielectric back contact (PDBC) structure can be used to form a point-contact architecture that features a dielectric spacer with spatially distributed, reduced-area metal point contacts between the semiconductor back not recognized contact layer and the metal back contact. In this structure, the dielectric-metal region provides higher reflectance and is electrically insulating. Reduced-area metal point contacts provide electrical conduction for the back contact but typically have lower reflectance. The fabrication methods discussed in this article were developed for thermophotovoltaic cells, but they apply to any III-V optoelectronic device requiring the use of a conductive and highly reflective back contact. Patterned dielectric back contacts may be used for enhanced sub-bandgap reflectance, for enhanced photon recycling near the bandgap energy, or both depending on the optoelectronic application. The following fabrication methods are discussed in the article: PDBC fabrication procedures for spin-on dielectrics and commonly evaporated dielectrics to form the spacer layer; methods to selectively etch a parasitically absorbing back contact layer using metal point contacts as an etch mask; methods incorporating a dielectric etch through different process techniques such as reactive ion and wet etching.

14 SOLAR ENERGY↗

Massive, long-lived electrostatic potentials in a rotating mirror plasma

Abstract Hot plasma is highly conductive in the direction parallel to a magnetic field. This often means that the electrical potential will be nearly constant along any given field line. When this is the case, the cross-field voltage drops in open-field-line magnetic confinement devices are limited by the tolerances of the solid materials wherever the field lines impinge on the plasma-facing components. To circumvent this voltage limitation, it is proposed to arrange large voltage drops in the interior of a device, but coexist with much smaller drops on the boundaries. To avoid prohibitively large dissipation requires both preventing substantial drift-flow shear within flux surfaces and preventing large parallel electric fields from driving large parallel currents. It is demonstrated here that both requirements can be met simultaneously, which opens up the possibility for magnetized plasma tolerating steady-state voltage drops far larger than what might be tolerated in material media.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mirror Nuclei: Symmetry Breaking and Nuclear Dynamics

Differences in excitation energy between isobaric analogue states are measured to study the validity of isospin symmetry in medium-mass nuclei as a function of the angular momentum These differences are of the order of tens of keV and can be well reproduced by state-of-the-art shell model calculations. Several nuclear structure properties can be deduced from these data, such as the alignment of nucleons along rotational bands, the evolution of the nuclear radius and the appearance of pure single particle configurations across two main shells. In addition, the isospin breaking of the nuclear interaction is suggested by the systematic comparison with the data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Co/Mg/X Multilayer Mirrors For the EUV Range

A new material combination namely Co/Mg multilayer designed for optics applications in the EUV range, is reported. Simulations show that reflectivity value of the Co/Mg multilayer can reach a reflectivity of 55% at 25.2 nm (49.2 eV), when the grazing incidence angle is set to 45 deg. and s polarization is considered. The introduction of additional materials, e.g., Y and Zr can improve the reflectivity to 61%. Co/Mg and Co/Mg/B{sub 4}C multilayers have been deposited following the parameters deduced from the simulations. The introduction of a B{sub 4}C barrier layer would in principle increase the multilayer reflectivity to 61%. In fact the reflectivity measurements at 0.154 nm show that the introduction of B{sub 4}C does not improve the structural quality of the multilayers.

36 MATERIALS SCIENCE↗

Ion Beam Neutralization Using FEAs and Mirror Magnetic Fields

Advanced implantation systems used for semiconductor processing require transportation of ion beams which are quasi-parallel and have low energy, such as ({sup 11}B{sup +},{sup 31}P{sup +},{sup 75}As{sup +}) with energy in the range E{sub ion} 200-1000 eV. Compensation of ion beam divergence may be obtained through electron injection and confinement in regions of non-uniform magnetic fields. Field emitter arrays with special properties are used as electron sources. The present study shows that electron confinement takes place in regions of gradient magnetic field, such as nearby analyzing, collimator and final energy magnets of the ion beam line. Modeling results have been obtained using Opera3D/Tosca/Scala. In regions of gradient magnetic field, electrons have helical trajectories which are confined like a cloud inside curved 'magnetic bottles'. An optimal range of positions with respect to the magnet for placing electron sources in gradient magnetic field has been shown to exist.

43 PARTICLE ACCELERATORS↗

Adsorption dynamics and angular dependency of contaminants on Ru mirror surfaces

A real time contamination of the Ru surface and corresponding effect on its work function were studied using extreme ultraviolet photoelectron spectroscopy with a 13.5-nm wavelength of light. The change in work function indicates formation of molecular dipoles, oriented outward from the Ru surface. X-ray photoelectron spectroscopy investigations suggest variation in electromagnetic interaction with the components of the adsorbed foreign species when the emission angle from the target surface was changed from 0 deg. to 50 deg. ; H{sub 2}O and C-O{sub n} show a strong coupling at lower angles and OH dominates at higher angles, whereas carbon is found in the mid-range peaking at 30 deg. .

36 MATERIALS SCIENCE↗

Effect of Si interlayers on the magnetic and mechanical properties of Fe/Ge neutron polarizing multilayer mirrors

The neutron polarizing supermirror is one of the most important optical devices for polarizing neutron beams. To meet a variety of research demands, neutron polarizing supermirrors need to display high polarization efficiencies at low external magnetic fields. Fe/Si and Fe/Ge multilayers are typically used in neutron polarizing supermirrors because the contrast in scattering length densities almost vanishes for spin-down neutrons. The Fe/Si/Ge/Si multilayer, obtained by adding thin interlayers of Si to an Fe/Ge multilayer, is effective in reducing the external field strength necessary to achieve efficient neutron polarization. To gain insight into the mechanism that controls the required external field strength for a neutron polarizing supermirror, we investigated the magnetic and mechanical properties of Fe/Si, Fe/Ge, and Fe/Si/Ge/Si multilayers. The external field strength required to achieve efficient neutron polarization was found to be proportional to the compressive film stress. The compressive stress of the Fe/Si/Ge/Si multilayer was smaller by a factor of 4.4 and 2.7 than that of Fe/Si and Fe/Ge multilayers, respectively. These measurements and analyses showed that a reduction in the compressive film stress in the Fe/Si/Ge/Si multilayer permits the use of lower external field strength to achieve efficient neutron polarization. X-ray photoelectron spectroscopic studies showed that the formation of a Ge-Si solid solution in the Ge layer may explain the marked reduction in compressive stress in the case of the Fe/Si/Ge/Si multilayer. This study confirmed that a reduction in compressive film stress is very important for a high-performance neutron polarizing supermirror.

36 MATERIALS SCIENCE↗

Modulating the Neutron Flux from a Mirror Neutron Source

A 14-MeV neutron source based on a Gas-Dynamic Trap will provide a high flux of 14 MeV neutrons for fusion materials and sub-component testing. In addition to its main goal, the source has potential applications in condensed matter physics and biophysics. In this report, the author considers adding one more capability to the GDT-based neutron source, the modulation of the neutron flux with a desired frequency. The modulation may be an enabling tool for the assessment of the role of non-steady-state effects in fusion devices as well as for high-precision, low-signal basic science experiments favoring the use of the synchronous detection technique. A conclusion is drawn that modulation frequency of up to 1 kHz and modulation amplitude of a few percent is achievable. Limitations on the amplitude of modulations at higher frequencies are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a mirror-based endoscope for divertor spectroscopy on JET with the new ITER-like wall (invited)

A new endoscope with optimised divertor view has been developed in order to survey and monitor the emission of specific impurities such as tungsten and the remaining carbon as well as beryllium in the tungsten divertor of JET after the implementation of the ITER-like wall in 2011. The endoscope is a prototype for testing an ITER relevant design concept based on reflective optics only. It may be subject to high neutron fluxes as expected in ITER. The operating wavelength range, from 390 nm to 2500 nm, allows the measurements of the emission of all expected impurities (W I, Be II, C I, C II, C III) with high optical transmittance ({>=}30% in the designed wavelength range) as well as high spatial resolution that is {<=}2 mm at the object plane and {<=}3 mm for the full depth of field ({+-}0.7 m). The new optical design includes options for in situ calibration of the endoscope transmittance during the experimental campaign, which allows the continuous tracing of possible transmittance degradation with time due to impurity deposition and erosion by fast neutral particles. In parallel to the new optical design, a new type of possibly ITER relevant shutter system based on pneumatic techniques has been developed and integrated into the endoscope head. The endoscope is equipped with four digital CCD cameras, each combined with two filter wheels for narrow band interference and neutral density filters. Additionally, two protection cameras in the {lambda} > 0.95 {mu}m range have been integrated in the optical design for the real time wall protection during the plasma operation of JET.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Elevation angle alignment of quasi optical receiver mirrors of collective Thomson scattering diagnostic by sawtooth measurements

Localized measurements of the fast ion velocity distribution function and the plasma composition measurements are of significant interest for the fusion community. Collective Thomson scattering (CTS) diagnostics allow such measurements with spatial and temporal resolution. Localized measurements require a good alignment of the optical path in the transmission line. Monitoring the alignment during the experiment greatly benefits the confidence in the CTS measurements. An in situ technique for the assessment of the elevation angle alignment of the receiver is developed. Using the CTS diagnostic on TEXTOR without a source of probing radiation in discharges with sawtooth oscillations, an elevation angle misalignment of 0.9 Degree-Sign was found with an accuracy of 0.25 Degree-Sign .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Plasma instability in the afterglow of electron cyclotron resonance discharge sustained in a mirror trap

The work presented in this article is devoted to time-resolved diagnostics of non-linear effects observed during the afterglow plasma decay of a 14 GHz electron cyclotron resonance ion source operated in pulsed mode. Plasma instabilities that cause perturbations of the extracted ion current during the decay were observed and studied. It is shown that these perturbations are associated with precipitation of high energy electrons along the magnetic field lines and strong bursts of bremsstrahlung emission. The effect of ion source settings on the onset of the observed instabilities was investigated. Based on the experimental data and estimated plasma properties, it is assumed that the instabilities are of cyclotron type. The conclusion is supported by a comparison to other types of plasma devices which exhibit similar characteristics but which operate in a different plasma confinement regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sub-structure of laser generated harmonics reveals plasma dynamics of a relativistically oscillating mirror

Theoretical and experimental investigations of the dynamics of a relativistically oscillating plasma slab reveal spectral line splitting in laser driven harmonic spectra, leading to double harmonic series. Both series are well characterized with harmonics arising by two fundamental frequencies. While a relativistic oscillation of the critical density drives the harmonic emission, the splitting is a result of an additional acceleration during the laser pulse duration. In comparison with the oscillatory movement, this acceleration is rather weak and can be described by a plasma shock wave driven by the pressure of light. We introduce particle in cell simulations and an analytical model explaining the harmonic line splitting. The derived analytical formula gives direct access between the splitting in the harmonic spectrum and the acceleration of the plasma surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics of AlN/GaN nanowire Bragg mirror grown on (001) silicon by molecular beam epitaxy

GaN nanowires containing AlN/GaN distributed Bragg reflector (DBR) heterostructures have been grown on (001) silicon substrate by molecular beam epitaxy. A peak reflectance of 70% with normal incidence at 560 nm is derived from angle resolved reflectance measurements on the as-grown nanowire DBR array. The measured peak reflectance wavelength is significantly blue-shifted from the ideal calculated value. The discrepancy is explained by investigating the reflectance of the nanoscale DBRs with a finite difference time domain technique. Ensemble nanowire microcavities with In{sub 0.3}Ga{sub 0.7}N nanowires clad by AlN/GaN DBRs have also been characterized. Room temperature emission from the microcavity exhibits considerable linewidth narrowing compared to that measured for unclad In{sub 0.3}Ga{sub 0.7}N nanowires. The resonant emission is characterized by a peak wavelength and linewidth of 575 nm and 39 nm, respectively.

36 MATERIALS SCIENCE↗