Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Axial Flux Brushless Permanent Magnet Electrical Machine Rotor

An axial flux brushless permanent magnet electrical machine having a stator and at least one rotor. The rotor includes a Halbach array of magnets with at least four magnets per magnetic cycle. The rotor magnets are contained within pockets in the rotor. The pockets are formed with magnet pocket walls being radial walls, active surface walls, and/or inactive surface walls where the walls retain the magnets within the pockets.

Ricci, Michael Richard↗

PVA and PEG functionalised LSMO nanoparticles for magnetic fluid hyperthermia application

La{sub 0.7}Sr{sub 0.3}MnO{sub 3} magnetic nanoparticles are synthesized by a solution combustion method and functionalised with polyvinyl alcohol and polyethylene glycol. The induction heating characteristics of coated magnetic nanoparticles (42 °C) were observed at a reasonably low concentration (5 mg/mL). Remarkably, coated magnetic nanoparticles exhibited a promisingly high specific absorption rate with varying magnetic field and constant frequency. The surface analysis is carried out by X-ray photoelectron spectroscopy. A reduction in the agglomeration of the particles was observed when the magnetic nanoparticles were functionalised with polyvinyl alcohol or polyethylene glycol and can be confirmed by transmission electron microscopy and dynamic light scattering studies. Vibrating sample magnetometer measurements indicate superparamagnetic behaviour at room temperature before and after coating. Colloidal stability revealed a considerably higher zeta potential value for coated system. In vitro cytotoxicity test of the magnetic nanoparticles indicates that coated nanoparticles have no significant effect on cell viability within the tested concentrations (1–5 mg mL{sup -1}) as compared to uncoated La{sub 0.7}Sr{sub 0.3}MnO{sub 3}. All these findings explore the potentiality of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} nanoparticles for magnetic fluid hyperthermia. - Highlights: • Surface functionalization of LSMO nanoparticles — first time with PVA • Surface functionalization of LSMO nanoparticles — first time with PEG • BSA protein — first time used as dispersion medium for stability of LSMO nanoparticles • The heating ability observed at low concentration • Improved efficiency of magnetic fluid hyperthermia treatment with surfactants.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Unusual Behavior of the Coercive Field in a (CoFeB){sub x}(LiNbO{sub y}){sub 100 –x} Nanocomposite with a High Content of Magnetic Ions in an Insulating Matrix

The temperature behavior of the coercive field H{sub c}(T) and the magnetic anisotropy in (CoFeB){sub x}(LiNbO{sub y}){sub 100 –x} nanocomposite films with a ferromagnetic alloy content x = 33–48 at % near the metal–insulator transition (x{sub c} ≈ 42 at %) have been studied by the magnetometry and ferromagnetic resonance methods. The films were ensembles of CoFe granules with lateral sizes of 2–4 nm, which are highly elongated (up to 10–15 nm) in the nanocomposite growth direction and embedded in a LiNbO{sub y} matrix with a high content of magnetic Fe{sup 2+} and Co{sup 2+} ions (up to 3 × 10{sup 22} cm{sup –3}). A nonmonotonic behavior of H{sub c}(T), viz., a sharp minimum at a temperature T{sub F} ≈ 50 K close to the blocking temperature (T{sub b}{sup ∗} ≈ 70 K) of the granule magnetic moment, has been detected in samples with x < 42 at %. The effective field of the perpendicular growth anisotropy (0.4–0.8 kOe) turns out to be an order of magnitude lower than the field of the granule shape anisotropy (about 7 kOe) and increases with x. The revealed peculiarities are explained by the fact that, apart from the ferromagnetic intergranular exchange interaction in an infinite cluster, the surface anisotropy effects involving magnetic ions in a thin layer adjacent to the cluster and responsible for the surface interaction fluctuations play a big role in the investigated percolation nanocomposites, enhancing the nanocomposite demagnetization at T ≈ T{sub F} ~ T{sub b}{sup ∗}.

36 MATERIALS SCIENCE↗

Compact non-thermal radio emission from B-peculiar stars

Some stars hotter than 10,000 K show propensity for unusual surface abundances and excessive magnetic fields. These peculiar stars, Ap and Bp in the spectral nomenclature, show unusually prominent absorption lines of heavier elements. Rapid rotation and strong magnetic fields are revealed by line shapes and Zeeman splitting. VLBI is here used to directly probe the source size and brightness temperature of weak radio emission recently discovered from two isolated Bp stars, sigma Orionis E and HD37017. The emitting zone for each star is no more than 6 stellar diameters in extent, reflecting brightness temperatures of more than one billion K. Such high surface brightness resembles gyrosynchrotron radiation from mildly relativistic electrons trapped in the strong magnetic fields surrounding these stars. Compact radio radiation from these two stars presents new opportunities for probing the physical environments of early-type stars and for precise radio astrometry.

Phillips, R. B.↗

Structure and Composition of the Distant Lunar Exosphere: Constraints from ARTEMIS Observations of Ion Acceleration in Time-Varying Fields

By analyzing the trajectories of ionized constituents of the lunar exosphere in time-varying electromagnetic fields, we can place constraints on the composition, structure, and dynamics of the lunar exosphere. Heavy ions travel slower than light ions in the same fields, so by observing the lag between field rotations and the response of ions from the lunar exosphere, we can place constraints on the composition of the ions. Acceleration, Reconnection, Turbulence, and Electrodynamics of Moon's Interaction with the Sun (ARTEMIS) provides an ideal platform to utilize such an analysis, since its two-probe vantage allows precise timing of the propagation of field discontinuities in the solar wind, and its sensitive plasma instruments can detect the ion response. We demonstrate the utility of this technique by using fully time-dependent charged particle tracing to analyze several minutes of ion observations taken by the two ARTEMIS probes ~3000-5000 km above the dusk terminator on 25 January 2014. The observations from this time period allow us to reach several interesting conclusions. The ion production at altitudes of a few hundred kilometers above the sunlit surface of the Moon has an unexpectedly significant contribution from species with masses of 40 amu or greater. The inferred distribution of the neutral source population has a large scale height, suggesting that micrometeorite impact vaporization and/or sputtering play an important role in the production of neutrals from the surface. Our observations also suggest an asymmetry in ion production, consistent with either a compositional variation in neutral vapor production or a local reduction in solar wind sputtering in magnetic regions of the surface.

Moon↗

Simulated plasma facing component measurements for an in situ surface diagnostic on Alcator C-Mod

The ideal in situ plasma facing component (PFC) diagnostic for magnetic fusion devices would perform surface element and isotope composition measurements on a shot-to-shot ({approx}10 min) time scale with {approx}1 {mu}m depth and {approx}1 cm spatial resolution over large areas of PFCs. To this end, the experimental adaptation of the customary laboratory surface diagnostic - nuclear scattering of MeV ions - to the Alcator C-Mod tokamak is being guided by ACRONYM, a Geant4 synthetic diagnostic. The diagnostic technique and ACRONYM are described, and synthetic measurements of film thickness for boron-coated PFCs are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A van der Waals Inclusive Density Functional Theory Study of the Nature of Bonding for Thiophene Adsorption on Ni(100) and Cu(100) Surfaces

We report the results of the first-principles density functional theory calculations for the adsorption of thiophene (C 4 H 4 S) on Cu(100) and Ni(100) surfaces. The adsorption properties on these surfaces are evaluated for several adsorption configurations, and the calculations are performed with the inclusion of van der Waals (vdW) interactions invoking the optimized vdW (optB86b-vdW, optB88-vdW, and optPBE-vdW) as well as revPBE-vdW and rPW86-vdW2 functionals. In agreement with the earlier reports, on both surfaces, the most stable adsorption configurations correspond to the hollow-45 at which the thiophene adsorbs parallel to the surface. For the adsorption on Ni(100), in agreement with the experimental observations, we confirm that thiophene spontaneously ruptures via breaking of a C–S bond when the center of the molecule is placed over a bridge site. On the basis of both the bond distribution and charge transfer analysis, we conclude that the rupturing of thiophene observed at the bridge-45 configuration on Ni(100) may result from large charge transfer from the surface. The analyses of the electronic and geometric structures and charge transfer reveal that the interaction of the thiophene molecule with Ni(100) is much stronger than that of the Cu(100) surface. Upon adsorption of the molecule, for the former surface, we observed much larger charge transfer, non-negligible changes in the positions of the surface atoms, and appreciable electronic structure changes (i.e., in the center and width of the d-band). The adsorption of thiophene on Ni(100) also leads to the decrease in the magnetic moment of the surface Ni atoms particularly those in the vicinity of the adsorbed molecule. All these observations considered, we conclude that the nature of bonding on Ni(100) can be classified as strong chemisorption, while on Cu(100) it can be classified between weak and strong physisorption depending on the vdW functional used.

36 MATERIALS SCIENCE↗

THE EFFECTS OF MAGNETIC FIELDS AND INHOMOGENEITIES ON ACCRETION DISK SPECTRA AND POLARIZATION

We present the results of one- and three-dimensional radiative transfer calculations of polarized spectra emerging from snapshots of radiation magnetohydrodynamical simulations of the local vertical structure of black hole accretion disks. The simulations cover a wide range of physical regimes relevant for the high/soft state of black hole X-ray binaries. We constrain the uncertainties in theoretical spectral color correction factors due to the presence of magnetic support of the disk surface layers and strong density inhomogeneities. For the radiation-dominated simulation, magnetic support increases the color correction factor by about 10%, but this is largely compensated by a 10% softening due to inhomogeneities. We also compute the effects of inhomogeneities and Faraday rotation on the resulting polarization. Magnetic fields in the simulations are just strong enough to produce significant Faraday depolarization near the spectral peak of the radiation field. X-ray polarimetry may therefore be a valuable diagnostic of accretion disk magnetic fields, being able to directly test simulations of magnetorotational turbulence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resonant Coupling of a Bose-Einstein Condensate to a Micromechanical Oscillator

We report experiments in which the vibrations of a micromechanical oscillator are coupled to the motion of Bose-condensed atoms in a trap. The interaction relies on surface forces experienced by the atoms at about 1 {mu}m distance from the mechanical structure. We observe resonant coupling to several well-resolved mechanical modes of the condensate. Coupling via surface forces does not require magnets, electrodes, or mirrors on the oscillator and could thus be employed to couple atoms to molecular-scale oscillators such as carbon nanotubes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface reconstructions and modified surface states in L a 1 – x C a x Mn O 3

Here, the unique functionalities present at surfaces and interfaces of complex oxides have attracted intense research in the past decade. Yet, the fundamental mechanisms underpinning functionality are often elusive, especially in doped manganites, limiting their implementation in functional electronic devices such as memristors and spin valves. Here, we present a local probe-based study on mixed-terminated La 5/8 Ca 3/8 MnO 3 (LCMO) films, and reveal surface metallicity in a thin film grown by pulsed-laser deposition. Using first-principles density-functional theory calculations with Hubbard correction that are more accurate to capture effects of correlation in these systems, we show that for Ca-segregated (001) LCMO surfaces the (La,Ca)O-site terminated surfaces are half metallic due to delocalized Mn- d states populating the Fermi level, whereas the MnO 2 -site terminated surfaces exhibit a half-metallic or insulating character depending on the type of surface reconstruction. Computations not only explain the current measurements, but also explain other recent surface measurements on LCMO thin films, leading to a coherent picture of how the crucial link between surface segregation and Jahn-Teller couplings in the manganese oxides tune the surface electronic/magnetic structure, thereby pointing to the fine control of transport and magnetism at the conductive oxide surface independent of the bulk.

36 MATERIALS SCIENCE↗

MAGNETIC STRUCTURE OF RAPIDLY ROTATING FK COMAE-TYPE CORONAE

We present a three-dimensional simulation of the corona of an FK Com-type rapidly rotating G giant using a magnetohydrodynamic model that was originally developed for the solar corona in order to capture the more realistic, non-potential coronal structure. We drive the simulation with surface maps for the radial magnetic field obtained from a stellar dynamo model of the FK Com system. This enables us to obtain the coronal structure for different field topologies representing different periods of time. We find that the corona of such an FK Com-like star, including the large-scale coronal loops, is dominated by a strong toroidal component of the magnetic field. This is a result of part of the field being dragged by the radial outflow, while the other part remains attached to the rapidly rotating stellar surface. This tangling of the magnetic field, in addition to a reduction in the radial flow component, leads to a flattening of the gas density profile with distance in the inner part of the corona. The three-dimensional simulation provides a global view of the coronal structure. Some aspects of the results, such as the toroidal wrapping of the magnetic field, should also be applicable to coronae on fast rotators in general, which our study shows can be considerably different from the well-studied and well-observed solar corona. Studying the global structure of such coronae should also lead to a better understanding of their related stellar processes, such as flares and coronal mass ejections, and in particular should lead to an improved understanding of mass and angular momentum loss from such systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electromagnetic sounding of the moon using Apollo 16 and Lunokhod 2 surface magnetometer observations /preliminary results/

A technique of deep electromagnetic sounding of the moon using simultaneous magnetic-field measurements at two lunar surface sites is described. The method, used with the assumption that deep electrical conductivity is a function only of lunar radius, has the advantage of allowing calculation of the external driving field from two surface-site measurements only and therefore does not require data from a lunar orbiting satellite. A transient-response calculation is presented for the example of a magnetic-field discontinuity, measured simultaneously by Apollo 16 and Lunokhod 2 surface magnetometers.

Vanian, L. L.↗

Scanning instrumentation for measuring magnetic field trapping in high Tc superconductors

Computerized scanning instrumentation measures and displays trapped magnetic fields across the surface of high Tc superconductors at 77 K. Data are acquired in the form of a raster scan image utilizing stepping motor stages for positioning and a cryogenic Hall probe for magnetic field readout. Flat areas up to 45 mm in diameter are scanned with 0.5-mm resolution and displayed as false color images.

Sisk, R. C.↗

Numerical study of coronal plasma jet formation

A new scenario for solar flare eruption in the coronal holes is analyzed by using MHD stability concepts for a spheromak configuration. The stability properties of a spheromak partially embedded into a conducting surface are studied using three dimensional MHD simulations. In agreement with the analytical theory, a large degree of line-tying stabilizes the spheromak's tilt instability, while the elongation has a destabilizing effect. High-resolution nonlinear simulations also demonstrate current sheet formation at the upper surface of the spheromak, where the tilted magnetic field of the spheromak reconnects with the background magnetic field. The calculated stability threshold and the observed magnetic reconnection support a model of coronal jet eruptions where a dome-like magnetic structure grows through flux emergence on the solar surface, tilts, reconnects, and erupts. Countering the effect from elongation, line-tying strongly stabilizes a spheromak growing from a flux-emergence process, suggesting that to accelerate the onset of eruptive coronal jets, there must be magnetic reconnection at the bottom of the spheromak to detach the structure from the solar surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low-loss metamaterial electromagnetically induced transparency based on electric toroidal dipolar response

In this paper, a low-loss and high transmission analogy of electromagnetically induced transparency based on electric toroidal dipolar response is numerically and experimentally demonstrated. It is obtained by the excitation of the low-loss electric toroidal dipolar response, which confines the magnetic field inside a dielectric substrate with toroidal geometry. The metamaterial electromagnetically induced transparency (EIT) structure is composed of the cut wire and asymmetric split-ring resonators. The transmission level is as high as 0.88, and the radiation loss is greatly suppressed, which can be proved by the surface currents distributions, the magnetic field distributions, and the imaginary parts of the effective permeability and permittivity. It offers an effective way to produce low-loss and high transmission metamaterial EIT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic Texture in Insulating Single Crystal High Entropy Oxide Spinel Films

Magnetic insulators are important materials for a range of next-generation memory and spintronic applications. Structural constraints in this class of devices generally require a clean heterointerface that allows effective magnetic coupling between the insulating layer and the conducting layer. However, there are relatively few examples of magnetic insulators that can be synthesized with surface qualities that would allow these smooth interfaces and precisely tuned interfacial magnetic exchange coupling, which might be applicable at room temperature. In this work, we demonstrate an example of how the configurational complexity in the magnetic insulator layer can be used to realize these properties. The entropy-assisted synthesis is used to create single-crystal (Mg 0.2 Ni 0.2 Fe 0.2 Co 0.2 Cu 0.2 )Fe 2 O 4 films on substrates spanning a range of strain states. These films show smooth surfaces, high resistivity, and strong magnetic responses at room temperature. Furthermore, local and global magnetic measurements further demonstrate how strain can be used to manipulate the magnetic texture and anisotropy. These findings provide insight into how precise magnetic responses can be designed using compositionally complex materials that may find application in next-generation magnetic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗