Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LUNAR EXPLORATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

SMD Technology Highlights

Six technology highlights from the Science Mission Directorate (SMD) Heliophysics, Astrophysics, Earth, and Biological and Physical Sciences divisions. Technologies featured include 1. the 1653 m2 Solar Cruiser Solar Sail Propulsion system to enable missions to reach novel and otherwise difficult or impossible destinations for observing the Sun. 2. Technology sponsored by NASA and developed by MIT Space Nanotechnology Lab is developing high-performance space instrumentation for more powerful future X-ray telescopes that will study the dynamics of the high-energy universe. 3. Active thermal control technology that will help enable large ultra-stable telescopes needed to detect and characterize Earth-like planets around other stars. 4. SMD sponsored high-performance infrared sensors with reduced requirements for cooling onboard satellites and these sensors could potentially be flown on small satellite platforms like CubeSats. 5. A new technology that will utilize electron beams/ultraviolet light to remove dust that could help protect future space assets and astronauts from dangerous effects that arise from Moon/Mars dust exposure. 6. Studies using model organisms on ISS to understand the impact of the spaceflight environment on organisms in preparation for long-duration missions.

solar sail↗

Computationally Guided Design of Polymer-Coated Microparticles as Reusable Materials

Long-duration space exploration missions and sustained lunar or Martian surface operations present greater demands for multifunctional and reusable materials. By scaling down the amount of material to be launched from Earth, both mission cost and risk can be reduced. In this regard, leveraging in-space manufacturing capabilities with reusable feedstock materials is an attractive option, as it will allow for articles to be generated on demand, utilized, and then recycled for additional use. NASA’s Enabling Sustained Presence Using Recyclables (ESPUR) project aims to develop reusable materials using polymer-coated microparticles that are bonded via reversible Diels-Alder reactions, where only modest heat is needed to trigger the reverse reaction and enable reuse. For proof-of-concept demonstration, research is currently focused on the fabrication of epoxy microparticles that contain a copoly(carbonate urethane) coating with maleimide and furan functionalities. Here, we discuss the integration of computational materials modeling approaches to help navigate the large design space in this development effort. We perform molecular dynamics (MD) simulations with atomistic and coarse-grained models of the copolymer, which allow us to evaluate the effects of design parameters like the molecular weight and composition on the molecular interactions and chain dynamics. We show how the properties change with the reversible bonds. We also leverage discrete element method (DEM) simulations to assess how microparticle design parameters like the size ratio and volume fraction can be tuned to increase the packing density and number of microparticle contacts to improve the mechanical properties. Our results demonstrate how computational tools can be used in close collaboration with experimental efforts to accelerate material design.

reusable materials↗

NASA Envisioned Future Priorities for In-Space Transportation

The National Aeronautics and Space Administration (NASA) of the United States of America (US) has ambitious objectives for robust logistics solutions to commercialization of geocentric space, sustainable presence in Cislunar space and on the Lunar Surface, Human Mars exploration and expanded deep space robotic exploration. Critical to all these objectives are robust and affordable in-space transportation solutions. Resilient logistics is a precursor to sustained development and leveraging commercial investments. A range of near-term priority investments are required to enable the future envisioned state for In-Space Transportation. Advanced technology components and integrated system demonstrations for cryogenic fluid management are appropriate for viable human class propulsion and future leverage of In-Situ Resources Utilization propellant products. Space Nuclear Propulsion, both thermal and electric, investments enable human Mars exploration with reduced earth launches. Advanced propulsion investments enable lower cost development cycles and operations in addition to higher performance solutions for future robotic and extreme environment exploration. This paper provides a high-level overview of NASA’s plans for the development of in-space transportation capabilities, a description of the state-of-the-art, capability goals, technical challenges and gaps, and options for partnerships with industry and other agencies towards developing a robust power logistics infrastructure to support NASA’s objectives.

Propulsion↗

NASA Envisioned Future Priorities for In-Space Transportation

The National Aeronautics and Space Administration (NASA) of the United States of America (US) has ambitious objectives for robust logistics solutions to commercialization of geocentric space, sustainable presence in Cislunar space and on the Lunar Surface, Human Mars exploration and expanded deep space robotic exploration. Critical to all these objectives are robust and affordable in-space transportation solutions. Resilient logistics is a precursor to sustained development and leveraging commercial investments. A range of near-term priority investments are required to enable the future envisioned state for In-Space Transportation. Advanced technology components and integrated system demonstrations for cryogenic fluid management are appropriate for viable human class propulsion and future leverage of In-Situ Resources Utilization propellant products. Space Nuclear Propulsion, both thermal and electric, investments enable human Mars exploration with reduced earth launches. Advanced propulsion investments enable lower cost development cycles and operations in addition to higher performance solutions for future robotic and extreme environment exploration. This paper provides a high-level overview of NASA’s plans for the development of in-space transportation capabilities, a description of the state-of-the-art, capability goals, technical challenges and gaps, and options for partnerships with industry and other agencies towards developing a robust power logistics infrastructure to support NASA’s objectives.

Propulsion↗

Future Improvements to Impact for Long Duration Exploration Spaceflight

BACKGROUND: While NASA currently uses the Integrated Medical Model (IMM) to model spaceflight medical risk for Low Earth Orbit missions, IMPACT (Informing Mission Planning via Analysis of Complex Tradespaces) was created to improve the fidelity of medical risk analysis for exploration missions involving the Lunar surface and beyond. OVERVIEW: While completion work continues on the initial version of the IMPACT tool, work has already begun to investigate ways to further enhance the fidelity of the model and its utility to stakeholders. DISCUSSION: Future additions leveraging the more robust and flexible IMPACT architecture include analyzing mission segments to account for segment-specific environments (ie. Lunar surface or microgravity), clinically tracible outcomes based on partial treatment of conditions, the ability to model mission outcomes based on provider Knowledge, Skills, and Abilities (KSAs), and the ability to affect the incidence of conditions based on the occurrence of related conditions (e.g. UTI progressing to sepsis). IMPACT also enables the addition of new conditions to its database as required to meet future risk assessment needs. Ultimately, the desire is to broaden IMPACT from a tool that models/trades medical risk to one that does so for all crew health and performance relevant systems (e.g., food, exercise, etc.).

E Stratton↗

Artemis, Gateway, the Return to the Moon and Forward to Mars for Heliophysics

Over a 100 years ago we humans first landed on Antarctica. At the time we could not have imagined the heliophysics scientific gains that would be got from this continent. Sixty-five years ago we had the first international geophysical year aimed at deployment of instrumentation across this southern most continent and around the globe in recognition of the potential advancements from this integrated system of measurements. This potential has been realized and continues to grow as Antarctica returns science results across most disciplines, inspires artists and athletes, and has touched the lives of many through these gains. Today we are on the precipice of a future new Antarctica with the launch of Artemis 1 and plans for the return of humans to the lunar surface and human exploration to Mars. Heliophysics and space weather are necessary components for the success of these dreams and will benefit greatly from the fundamental science exploration that Artemis and mission to Mars will enable. Within this paper we will discuss the ways in which Artemis and the mission to Mars will benefit Heliophysics and space weather and end with recommendations for steps we see needed to actualize these dreams.

Alexa J Halford↗

Artemis, Gateway, the Return to the Moon and Forward to Mars for Heliophysics

Over a 100 years ago we humans first landed on Antarctica. At the time we could not have imagined the heliophysics scientific gains that would be got from this continent. Sixty-five years ago we had the first international geophysical year aimed at deployment of instrumentation across this southern most continent and around the globe in recognition of the potential advancements from this integrated system of measurements. This potential has been realized and continues to grow as Antarctica returns science results across most disciplines, inspires artists and athletes, and has touched the lives of many through these gains. Today we are on the precipice of a future new Antarctica with the launch of Artemis 1 and plans for the return of humans to the lunar surface and human exploration to Mars. Heliophysics and space weather are necessary components for the success of these dreams and will benefit greatly from the fundamental science exploration that Artemis and mission to Mars will enable. Within this paper we will discuss the ways in which Artemis and the mission to Mars will benefit Heliophysics and space weather and end with recommendations for steps we see needed to actualize these dreams.

Alexa Halford↗

Operational Modal Analysis of the Artemis I Dynamic Rollout Test and Wet Dress Rehearsal

NASA has developed an expendable heavy lift launch vehicle capability, the Space Launch System (SLS), to support lunar and deep space exploration. The uncrewed Artemis I was the first flight of this new launch vehicle and tested critical systems for the upcoming crewed Artemis II flight to the moon. Accelerations were recorded at a multitude of locations on Artemis, the Mobile Launcher (ML), and the Crawler Transporter (CT)during the rollout of Artemis I from the Vehicle Assembly Building (VAB) to Launch Pad 39B March 2022 and is referred to as the Artemis I Dynamic Rollout Test (DRT). While Artemis I was at Launch Pad 39B, the Wet Dress Rehearsal (WDR) was performed to demonstrate launch readiness and acceleration measurements were also recorded. Finally, Artemis I rolled back from Launch Pad 39B to the VAB in April 2022, where acceleration measurements were also recorded and is referred to as the rollback portion of DRT. Because the forces during rollout and at the launch pad acting on Artemis I, the ML, and the CT are not directly measurable, Operational Modal Analysis (OMA) techniques, instead of traditional Experimental Modal Analysis (EMA) techniques, were used to identify modal characteristics. The OMA analysis of DRT and WDR directly builds upon the lessons learned from the OMA analysis of an earlier rollout of the ML from the VAB. DRT and WDR dynamic characteristics will be used to support SLS Integrated Modal Test finite element model correlation efforts and Exploration Ground System ML and CT finite element model verification and validation, which are part of the Building Block approach the Space Launch System program has implemented. The dynamic characteristics extracted from DRT as well as the rollout acceleration time histories themselves will be used in the development of generic rollout forcing functions that will provide refined estimates of the Artemis IV rollout forces, which will have the heavier and larger SLS Block 1B launch vehicle and Mobile Launcher 2 (ML-2). This paper briefly describes Artemis I, the ML, and the CT physical characteristics, DRT rollout/rollback and WDR data collection, the challenges in implementing OMA techniques due in part to the CT harmonics, and how these challenges were overcome to obtain the Artemis I DRT configuration and WDR configuration modal characteristics.

Apollo↗

Operational Modal Analysis of the Artemis I Dynamic Rollout Test and Wet Dress Rehearsal

NASA has developed an expendable heavy lift launch vehicle capability, the Space Launch System (SLS), to support lunar and deep space exploration. The uncrewed Artemis I was the first flight of this new launch vehicle and tested critical systems for the upcoming crewed Artemis II flight to the moon. Accelerations were recorded at a multitude of locations on Artemis, the Mobile Launcher (ML), and the Crawler Transporter (CT)during the rollout of Artemis I from the Vehicle Assembly Building (VAB) to Launch Pad 39B March 2022 and is referred to as the Artemis I Dynamic Rollout Test (DRT). While Artemis I was at Launch Pad 39B, the Wet Dress Rehearsal (WDR) was performed to demonstrate launch readiness and acceleration measurements were also recorded. Finally, Artemis I rolled back from Launch Pad 39B to the VAB in April 2022, where acceleration measurements were also recorded and is referred to as the rollback portion of DRT. Because the forces during rollout and at the launch pad acting on Artemis I, the ML, and the CT are not directly measurable, Operational Modal Analysis (OMA) techniques, instead of traditional Experimental Modal Analysis (EMA) techniques, were used to identify modal characteristics. The OMA analysis of DRT and WDR directly builds upon the lessons learned from the OMA analysis of an earlier rollout of the ML from the VAB. DRT and WDR dynamic characteristics will be used to support SLS Integrated Modal Test finite element model correlation efforts and Exploration Ground System ML and CT finite element model verification and validation, which are part of the Building Block approach the Space Launch System program has implemented. The dynamic characteristics extracted from DRT as well as the rollout acceleration time histories themselves will be used in the development of generic rollout forcing functions that will provide refined estimates of the Artemis IV rollout forces, which will have the heavier and larger SLS Block 1B launch vehicle and Mobile Launcher 2 (ML-2). This paper briefly describes Artemis I, the ML, and the CT physical characteristics, DRT rollout/rollback and WDR data collection, the challenges in implementing OMA techniques due in part to the CT harmonics, and how these challenges were overcome to obtain the Artemis I DRT configuration and WDR configuration modal characteristics.

Apollo↗

Inflatable Softgoods Design of an Articulating Crew Transfer Tunnel

Future NASA exploration plans call for lunar and Martian surface systems that form a base camp of multiple, pressurized elements. These discrete components, including habitats and pressurized rovers, require interoperability to meet the Artemis Accords and standard docking systems to physically connect elements together. A pressurized, articulating crew transfer tunnel can be used between a rover and habitat to enable shirt-sleeve transfer of crew and cargo, saving valuable crew time and resources. While transfer tunnels have been described in the past, this work details the design of a structural softgoods system that has compliant capability through a proposed docking range of motion. The inflatable softgoods design is based on a zero-hoop stress shape, known as a Taylor surface, that is stacked and truncated to form a unique and flexible configuration. Analytical, non-linear models have been developed to examine and predict the behavior of the structure, and material testing was used to determine the properties that were used in the model. Finally, a sub-scale test article was constructed using the baseline design and pressurized testing is in work. Additional full-scale testing is planned for future years to fully demonstrate the capability of the system.

Tunnel↗

Inflatable Softgoods Design of an Articulating Crew Transfer Tunnel

Future NASA exploration plans call for lunar and Martian surface systems that form a base camp of multiple, pressurized elements. These discrete components, including habitats and pressurized rovers, require interoperability to meet the Artemis Accords and standard docking systems to physically connect elements together. A pressurized, articulating crew transfer tunnel can be used between a rover and habitat to enable shirt-sleeve transfer of crew and cargo, saving valuable crew time and resources. While transfer tunnels have been described in the past, this work details the design of a structural softgoods system that has compliant capability through a proposed docking range of motion. The inflatable softgoods design is based on a zero-hoop stress shape, known as a Taylor surface, that is stacked and truncated to form a unique and flexible configuration. Analytical, non-linear models have been developed to examine and predict the behavior of the structure, and material testing was used to determine the properties that were used in the model. Finally, a sub-scale test article was constructed using the baseline design and pressurized testing is in work. Additional full-scale testing is planned for future years to fully demonstrate the capability of the system.

Tunnel↗

Iron abundance and magnetic permeability of the moon

A set of simultaneous data from the Apollo 12 lunar surface magnetometer and the Explorer 35 Ames magnetometer are used to construct a whole-moon hysteresis curve, from which a new value of global lunar permeability is determined to be mu = 1.012 + or - 0.006. The corresponding global induced dipole moment is 2.1 x 10 to the 18th power gauss-cucm for typical inducing fields of .1000 gauss in the lunar environment. From the permeability measurement, lunar free iron abundance is determined to be 2.5 + or - 2.0 wt. %. Total iron abundance is calculated for two assumed compositional models of the lunar interior: a free iron/orthopyroxene lunar composition and a free iron/olivine composition. The overall lunar total iron abundance is determined to be 9.0 + or - 4.7 wt. %. Other lunar models with a small iron core and with a shallow iron-rich layer are discussed in light of the measured global permeability. Effects on permeability and iron content calculations due to a possible lunar ionosphere are also considered.

Parkin, C. W.↗

Iron abundance and magnetic permeability of the moon

A larger set of simultaneous data from the Apollo 12 lunar surface magnetometer and the Explorer 35 Ames magnetometer are used to construct a whole-moon hysteresis curve, from which a new value of global lunar permeability is determined to be mu = 1.012 + or - 0.006. The corresponding global induced dipole moment is 2.1 x 10 to the 18th power gauss-cu cm for typical inducing fields of .0001 gauss in the lunar environment. From the permeability measurement, lunar free iron abundance is determined to be 2.5 + or - 2.0 wt. %. Total iron abundance (sum of iron in the ferromagnetic and paramagnetic states) is calculated for two assumed compositional models of the lunar interior: a free iron/orthopyroxene lunar composition and a free iron/olivine composition. The overall lunar total iron abundance is determined to be 9.0 + or - 4.7 wt. %. Other lunar models with a small iron core and with a shallow iron-rich layer are discussed in light of the measured global permeability.

Parkin, C. W.↗

Iron abundance and magnetic permeability of the moon

A larger set of simultaneous data from the Apollo 12 lunar surface magnetometer and the Explorer 35 Ames magnetometer are used to construct a whole-moon hysteresis curve, from which a new value of global lunar permeability is determined to be mu = 1.012 + or - 0.006. The corresponding global induced dipole moment is 2.1 times ten to the eighteenth power gauss-cu cm for typical inducing fields of one ten-thousandth gauss in the lunar environment. From the permeability measurement, lunar free iron abundance is determined to be 2.5 + or - 2.0 wt %. Total iron abundance (sum of iron in the ferromagnetic and paramagnetic states) is calculated for two assumed compositional models of the lunar interior: a free iron/orthopyroxene lunar composition and a free iron/olivine composition. The overall lunar total iron abundance is determined to be 9.0 + or - 4.7 wt %. Other lunar models with a small iron core and with a shallow iron-rich layer are discussed in light of the measured global permeability. Effects on permeability and iron content calculations due to a possible lunar ionosphere are also considered.

Parkin, C. W.↗

Lunar Lava Tube Sensing

Large (greater than 300 m diameter) lava tube caverns appear to exist on the Moon and could provide substantial safety and cost benefits for lunar bases. Over 40 m of basalt and regolith constitute the lava tube roof and would protect both construction and operations. Constant temperatures of -20 C reduce thermal stress on structures and machines. Base designs need not incorporate heavy shielding, so lightweight materials can be used and construction can be expedited. Identification and characterization of lava tube caverns can be incorporated into current precursor lunar mission plans. Some searches can even be done from Earth. Specific recommendations for lunar lava tube search and exploration are (1) an Earth-based radar interferometer, (2) an Earth-penetrating radar (EPR) orbiter, (3) kinetic penetrators for lunar lava tube confirmation, (4) a 'Moon Bat' hovering rocket vehicle, and (5) the use of other proposed landers and orbiters to help find lunar lava tubes.

York, Cheryl Lynn↗

Mobile LiDAR as A Tool for Terrestrial and Planetary Cave Exploration and Mapping

The Kinematic Navigation and Cartography Knapsack (KNaCK) team at NASA’s Marshall Space Flight Center in Huntsville, Alabama is developing tools that enable ultra-high resolution terrain mapping and navigation using mobile LiDAR (Light Detection and Ranging) and SLAM (Simultaneous Localization and Mapping) algorithms in fully GPS-denied and unilluminated environments. The backpack mounted LiDAR instrument under development by our team demonstrates the potential of mobile SLAM LiDAR for use in challenging lunar and planetary surface environments as well as for lunar, planetary, and terrestrial cave exploration, study, and utilization.

LiDAR↗

Do Bare Rocks Exist on the Moon?

Astronaut surface observations and close-up images at the Apollo and Chang'e 1 landing sites confirm that at least some lunar rocks have no discernable dust cover. However, ALSEP (Apollo Lunar Surface Experiments Package) measurements as well as astronaut and LADEE (Lunar Atmosphere and Dust Environment Explorer) orbital observations and laboratory experiments possibly suggest that a fine fraction of dust is levitated and moves across and above the lunar surface. Over millions of years such dust might be expected to coat all exposed rock surfaces. This study uses thermal modeling, combined with Diviner (a Lunar Reconnaissance Orbiter experiment) orbital lunar eclipse temperature data, to further document the existence of bare rocks on the lunar surface.

Allen, Carlton↗

Toward a Suite of Standard Lunar Regolith Simulants for NASA's Lunar Missions: Recommendations of the 2005 Workshop of Lunar Regolith Simulant Materials

As NASA turns its exploration ambitions towards the Moon once again, the research and development of new technologies for lunar operations face the challenge of meeting the milestones of a fast-pace schedule, reminiscent of the 1960's Apollo program. While the lunar samples returned by the Apollo and Luna missions have revealed much about the Moon, these priceless materials exist in too scarce quantities to be used for technology development and testing. The need for mineral materials chosen to simulate the characteristics of lunar regoliths is a pressing issue that is being addressed today through the collaboration of scientists, engineers and NASA program managers. The issue of reproducing the properties of lunar regolith for research and technology development purposes was addressed by the recently held Workshop on Lunar Regolith Simulant Materials at Marshall Space Flight Center. The conclusions from the workshop and considerations concerning the feasibility (both technical and programmatic) of producing such materials will be presented here.

Schlagheck, R. A.↗