Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Design considerations for solar power satellites

This report summarizes the performance characteristics of a conceptual solar power satellite (SPS) system with emphasis on the microwave power transmission system. The latest tradeoff studies on photovoltaic and thermal systems for converting solar energy into electricity at the satellite are reviewed. The microwave system, consisting of dc-RF amplifiers, a 1-km phased array, and a ground antenna/rectifier scheme is capable of delivering 5 GW of power to the commercial grid. The transmission efficiencies of smaller system sizes (down to 1 GW) are compared with that of the nominal 5 GW system. At present the frequency region of interest is the IMS (industrial, medical, and scientific) band at 2450 plus or minus 50 MHz. Economic and technical tradeoffs as a function of the microwave operating frequency are considered. Candidate dc-RF power converter tubes, including medium-power amplitrons, high-power klystrons, and low-power solid state amplifiers, are examined.

Arndt, G. D.↗

Study of the storm time fluxes of heavy ions

The characteristics of the storm time ring current ions in the energy range of 0.5 to 16 keV were investigated. Data were processed and analyzed from the energetic ion mass spectrometer aboard the S3-3 satellite. Results are used for planning and operating the ion mass spectrometer experiment on the ISEE spacecraft, for selecting and processing the ISEE ion data, and for planning and conducting coordinated satellite experiments in support of the International Magnetospheric Study (IMS). It is established from the S3-3 ion data that relatively large fluxes of energetic (keV) 0(+) and H(+) ions are frequently flowing upward from the ionosphere along magnetic field lines in the polar auroral regions. Also, from investigations with the same instrument during the main phase of three moderate (D sub ST approximately 100) magnetic storms, it is found that the number density of 0(+) ions in the ring current was comparable to H(+) ion density the range 0.5 to 15 keV.

Source record↗

Prediction of solar induced currents and effects on power transmission systems in central Canada

The auroral-electrojet zone covers three quarters of Manitoba and consequently, solar storms strongly affect transmission lines. Harmonics are generated at transformers due to the saturation of their cores by induced currents, and the level of harmonics produced may cause malfunction of control relays, and yield unacceptable distortions in normal ac waveforms. The expected effects of long ac transmission systems were studied with emphasis on a 500 kv line to be built from Winnipeg to Minneapolis-St. Paul. Spectral analysis of induced current records from Manitoba Hydro's LaVerendrye station and magnetograms from IMS stations in Manitoba were used along with results of Campbell's work on the Alaskan pipeline induction problem (1978) in order to predict periodic and surge currents. It is concluded that the surge currents will produce significant levels of harmonics and corresponding operating problems during magnetic storms.

Goddard, W. R.↗

The structure and properties of rapidly solidified high alloy aluminum materials

A series of 2024 type aluminum alloys modified by additions of 1 to 2% Li were studied to determine the role of the Cu:Li and the (Cu + Mg):Li ratios on resultant strength, ductility, notch-tensile behavior, and crack propagation rates. Ultrasonically gas atomized powders with quench rates of 10 to 100 thousand degrees/s were atomized in an argon atmosphere, producing yields of powder such that almost 100% was finer than 250 microns. The powders are free of gases and porosity, are quite spherical, have few satellites (adhering fine powder particles) and are of uniform microstructure. Strength properties are such that yield strength is 20% greater than for lithium-free 2024 ingot alloy, tensile strength is 10% greater than that of 2024 ingot material, and ductilities are comparable. In terms of specific strength and specific modulus, these RS 2024-Li alloys are significantly better than IM 2024.

Grant, N. J.↗

A motion picture presentation of magnetic pulsations

Using the data obtained from the IMS North American magnetometer network stations at high latitudes, a motion picture was made by a computer technique, describing time changes of Pc5 and Pi3 magnetic pulsation vectors. Examples of pulsation characteristics derived from this presentation are regional polarization changes including shifts of polarization demarcation lines, changes in the extent of an active region and its movement with time.

Suzuki, A.↗

Distance and absolute magnitudes of the brightest stars in the dwarf galaxy Sextans A

In an attempt to improve present bright star calibration, data were gathered for the brightest red and blue stars and the Cepheids in the Im V dwarf galaxy, Sextans A. On the basis of a magnitude sequence measured to V and B values of about 22 and 23, respectively, the mean magnitudes of the three brightest blue stars are V=17.98 and B=17.88. The three brightest red supergiants have V=18.09 and B=20.14. The periods and magnitudes measured for five Cepheids yield an apparent blue distance modulus of 25.67 + or - 0.2, via the P-L relation, and the mean absolute magnitudes of V=-7.56 and B=-5.53 for the red supergiants provide additional calibration of the brightest red stars as distance indicators. If Sextans A were placed at the distance of the Virgo cluster, it would appear to have a surface brightness of 23.5 mag/sq arcec. This, together with the large angular diameter, would make such a galaxy easily discoverable in the Virgo cluster by means of ground-based surveys.

Sandage, A.↗

Sunward convection in both polar caps

The storm of July 29, 1977 was chosen as an object of study for the Coordinated Data Analysis Workshop (CDAW), a part of the International Magnetospheric Study (IMS). The purpose of CDAW was to synthesize many diverse data sets in order to understand as fully as possible the magnetosphere's response to a variety of inputs, including a strong interplanetary shock, a time of strongly southward interplanetary magnetic field (IMF), and a time of strongly northward IMF. The July 29 event was particularly interesting because it contained effects of storm time compressions and of strongly southward and strongly northward IMF'S. The convection data appear to indicate reversed (sunward) convection in the polar cap in both the northern and southern hemispheres, although conjugacy cannot be established because the northern and southern passes were at different locations and different times

Reiff, P. H.↗

Existence of a component corotating with the earth in high-latitude disturbance magnetic fields

A study of the data from the high-latitude North American IMS network of magnetic stations suggests that there is a component in substorm perturbations that corotates with the earth. It is as yet not certain whether the existence of this component stems from the corotation of a part of the magnetospheric plasma involved in the substorm mechanism or if it is a 'phase change' resulting from the control of the substorm manifestations by the earth's main magnetic field which is not axially symmetric. There are other geophysical phenomena showing a persistence of longitudinal variations corotating with the earth. These phenomena are of significance for a better understanding of ionosphere-magnetosphere coupling.

Suzuki, A.↗

The Landsat-D responsiveness to user community needs

Initial examinations of the Landsat-4 Multispectral Scanner and Thematic Mapper (IM) imagery indicate that these systems and the ground-based data processing systems are performing well. A combination of the spatial resolution of the multispectral scanner with the four band (0.5-0.6, 0.6-0.7, 0.7-0.8, and 0.8-1.1 microns) multispectral capability provides a useful observation technique for identifying crop type, phenological state of development, and a real condition assessment. Landsat multispectral scanner imagery has become more important in the search for new deposits of oil and mineral resources, and geological applications indicate that image analysis complements geological mapping techniques. Advantages of the TM include more precise measurements of the increased reflectance of vegetation in the green and near infrared. In addition, TM has improvement vegetation species differentiation, due to measurements made in new spectral bands. Preliminary TM data analysis reveals that systems have performed to optimum expectations.

Salomonson, V. V.↗

Space station needs, attributes, and architectural options study. Volume 2: Program options, architecture, and technology

Mission scenarios and space station architectures are discussed. Electrical power subsystems (EPS), environmental control and life support, subsystems (ECLSS), and reaction control subsystem (RCS) architectures are addressed. Thermal control subsystems, (TCS), guidance/navigation and control (GN and C), information management systems IMS), communications and tracking (C and T), and propellant transfer and storage systems architectures are discussed.

Source record↗

A cross spectral analysis of high-latitude Pc 5 pulsations in the morning sector

An analysis of the spatial phase and amplitude structures of the ground Pc 5 pulsations in the morning sector was carried out using data from the North American IMS magnetometer network. Signals in the X, Y, and Z components were found to propagate from noon to the nightside with an apparent phase velocity of 13 km/sec. The phase was determined to vary with latitude, with total latitudinal phase differences of 200 and 90 deg, respectively, for the X and Y components. Corresponding latitudinal phase differences in the vertical components were 550 deg for the Alaska chain, and 360 deg for the Fort Churchill chain. Phase variation in the Fort Churchill chain was attributed to the ionospheric Hall current related to the field line resonance and the earth induction current. The earth induction current in the shallower regions near Fort Yukon is a necessary factor to explain the large variation in the Alaska chain.

Saka, O.↗

The origin and evolution of the coordinated data analysis workshop process

During the planning stage for the International Magnetospheric Study (IMS), it was stressed that coordinated observations among various satellites and among satellite, ground-based, balloon, and rocket (GBR) experiments were essential in obtaining the required observational data base. In the course of operating the Satellite Situation Center (SSC), it was found to be desirable to assemble a problem-oriented digital data base, consisting of a large number of physical parameters obtained from satellite and GBR sensors, in a computer system which would permit a large number of scientists to manipulate, display, discuss, study and analyze the data together in a coordinated manner. It was felt that such a process might shorten the time required to gain full scientific understanding of the observations. This approach was called the Coordinated Data Analysis Workshop (CDAW) process. Attention is given to the preliminary concept, the the initial implementation of the CDAW process, and aspects of subsequent evolution.

Vette, J. I.↗

Comparison of phase and amplitude structures of Pc 5 pulsations in the morning and afternoon sectors

North American IMS magnetometer network data are used in comparisons of the spatial phase and amplitude structures of the morning and afternoon Pc 5 pulsations, using cross spectral analysis of phase and amplitude readings between different stations. The spatial phase structures are found to be very similar in the morning and afternoon sectors for each of the three components. Amplitudes are larger in the magnetic north than in the magnetic east components for both sectors. Latitudinal amplitude and phase difference variations between the magnetic north and east components exhibit dissimilarities in the morning and afternoon sectors. These results suggest that compressional mode magnetic field oscillations are not observable on the ground in this time sector. The pulsations in both time sectors are instead seen as caused by transverse mode magnetospheric field oscillations.

Saka, O.↗

Recent observations of beam plasma interactions in the ionosphere and a comparison with laboratory studies of the beam plasma discharge

Experimental results from an electron beam injection rocket flight (27:010 AE) launched into an active aurora are summarized. The rocket carried an accelerator which injected programmed electron beams of less than 100 ma at 2 and 4 kV into the ionospheric plasma over the altitude range 120-240 km. A major objective of the experiment was the study of beam-plasma interactions and the possible identification of the ignition of the beam-plasma discharge (BPD) which had been intensively studied in the laboratory. A qualitative assessment of the data indicates that BPD ignition was produced by both 10 ma and Im beams at 2 and 4 kV. Many of the observed characteristics are similar to the BPD characteristics observed in the laboratory.

Bernstein, W.↗

The vectorization of a ray tracing program for image generation

Ray tracing is a widely used method for producing realistic computer generated images. Ray tracing involves firing an imaginary ray from a view point, through a point on an image plane, into a three dimensional scene. The intersections of the ray with the objects in the scene determines what is visible at the point on the image plane. This process must be repeated many times, once for each point (commonly called a pixel) in the image plane. A typical image contains more than a million pixels making this process computationally expensive. A traditional ray tracing program processes one ray at a time. In such a serial approach, as much as ninety percent of the execution time is spent computing the intersection of a ray with the surface in the scene. With the CYBER 205, many rays can be intersected with all the bodies im the scene with a single series of vector operations. Vectorization of this intersection process results in large decreases in computation time. The CADLAB's interest in ray tracing stems from the need to produce realistic images of mechanical parts. A high quality image of a part during the design process can increase the productivity of the designer by helping him visualize the results of his work. To be useful in the design process, these images must be produced in a reasonable amount of time. This discussion will explain how the ray tracing process was vectorized and gives examples of the images obtained.

Plunkett, D. J.↗

Some contributions to knowledge of the magnetospheric plasma by ISEE investigators

The ISEE project has made substantial contributions to the knowledge of the magnetosphere during the period of the IMS, especially in the discipline of Space Plasma Physics. Results obtained during approximately the first two years of the operation of ISEE-1 and -2, and touches on relevant results of ISEE-3 are reviewed. The ability to control the separation between ISEE-1 and -2, which are in nearly identical orbits, has permitted study of the motion and structure of the bow shock and magnetopause, the boundary layers, and the plasma sheet. Much evidence was obtained favoring the existence of reconnection and its relevance to the transfer of magnetic flux from the frontside to the rear of the magnetosphere, although not everyone agrees that it is the only important process. The presence of both reflected and accelerated particles was shown to lead to the development of a foreshock region between the bow shock and the interplanetary magnetic field line tangential to it.

Ogilvie, K. W.↗

Estimation of electric fields and current from ground-based magnetometer data

Recent advances in numerical algorithms for estimating ionospheric electric fields and currents from groundbased magnetometer data are reviewed and evaluated. Tests of the adequacy of one such algorithm in reproducing large-scale patterns of electrodynamic parameters in the high-latitude ionosphere have yielded generally positive results, at least for some simple cases. Some encouraging advances in producing realistic conductivity models, which are a critical input, are pointed out. When the algorithms are applied to extensive data sets, such as the ones from meridian chain magnetometer networks during the IMS, together with refined conductivity models, unique information on instantaneous electric field and current patterns can be obtained. Examples of electric potentials, ionospheric currents, field-aligned currents, and Joule heating distributions derived from ground magnetic data are presented. Possible directions for future improvements are also pointed out.

Kamide, Y.↗

A cometary ion mass spectrometer

The development of flight suitable analyzer units for that part of the GIOTTO Ion Mass Spectrometer (IMS) experiment designated the High Energy Range Spectrometer (HERS) is discussed. Topics covered include: design of the total ion-optical system for the HERS analyzer; the preparation of the design of analyzing magnet; the evaluation of microchannel plate detectors and associated two-dimensional anode arrays; and the fabrication and evaluation of two flight-suitable units of the complete ion-optical analyzer system including two-dimensional imaging detectors and associated image encoding electronics.

Shelley, E. G.↗