Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FILMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Micro Crystalline Bamboo Cellulose Based Seaweed Biodegradable Composite Films for Sustainable Packaging Material

This study is aimed to fabricate and characterize the seaweed- biodegradable films incorporated with varying concentrations of microcrystalline cellulose (MCC) which was extracted from two bamboo sources: Schizostachyum brachycladum (BLMCC) and Gigantochloa scortechinii (BSMCC). Pure biodegradable seaweed film was directly fabricated from red seaweed (Kappaphycus alvarezii). In this demonstrated work, commercial MCC (CMCC), BLMCC and BSMCC were used to reinforce the pure seaweed bio-degradable film at different loading concentrations (0, 1, 3, 5, 7, 10 and 15%) based on the dried-weight of seaweed, for packaging applications. There was substantial improvement in the tensile strength and contact angle values while reduction in the water vapor permeability and elongation at break values with the incorporation of the CMCC, BLMCC and BSMCC into the seaweed pure film matrix, which is highly desirable for the packaging material in the current scenario. The morphology of the fabricated films confirmed that there was good dispersion of the 7% of CMCC, 5% of BLMCC and 3% of BSMCC in the pure seaweed films, which resulted in the enhanced mechanical properties. So far, this is the first report on the microcrystalline cellulose based seaweed films with excellent mechanical properties, which makes them suitable for packaging application. The demonstrated work proved that both BSMCC and BLMCC based seaweed composite films have the huge potential to be used as biodegradable packaging material for wide range of applications. Graphical Abstract: .

36 MATERIALS SCIENCE↗

Influence of Al doping concentration on the opto-electronic chattels of SnS thin films readied by NSP

Herein, we limelight the key features of SnS thin films coated by spray pyrolysis process with different Al doping concentrations. The SnS thin films coated with different Al concentration (0, 2, 4, 6 at wt%) were characterized by various techniques. Structural parameters studied by XRD data revealed that all the prepared films were orthorhombic crystal structure with (111) as a preferential direction. Raman spectroscopy showed the presence of Ag, B{sub 1g}, B{sub 2g}, and B{sub 3g} vibration modes at their corresponding wave numbers. Concentration dependent granular change of Al:SnS films were shown by AFM images. The presence of Sn, S and Al element without any other impurities was confirmed through EDAX picture. UV studies revealed the shrinkage of band gap from 1.97 to 1.72 eV on increasing the Al doping concentration from 0% to 4 at wt%. Room temperature PL showed a high intense red shift, as emission observed at 722 nm for 4% of Al doped SnS thin film. Hall measurements exhibited p-type conducting nature of undoped and Al doped SnS films. The films showed a lowest resistivity of 2.695×10{sup −1} Ω cm for 4 at wt% Al doping concentration. 0.093% efficiency was obtained for the solar cell device fabricated by 4 at wt% of Al doped SnS thin film.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanostructure and Composition of Tribo-Boundary Films Formed in Ionic Liquid Lubrication

Since the idea of using ionic liquids (ILs) as lubricants was raised in 2001, many studies have been conducted in this area and results have demonstrated superior lubricating performance for a variety of ionic liquids. It is widely believed that tribochemical reactions occur between the metal surface and the IL during the wear process to form a protective tribo-boundary film on the contact area that reduces friction and wear. However, the study of this critical boundary film has been limited to top surface two-dimensional topography examination and chemical analysis in the literature. A more comprehensive characterization is needed to help understand the film formation process and the lubricating mechanism. This study demonstrated a multi-technique three-dimensional approach to characterize the IL-formed boundary films, including top surface morphology examination, cross section nanostructure characterization, and layered chemical analysis. Characterization was carried out on both ferrous and aluminum surfaces lubricated by an ammonium IL. The focused-ion-beam (FIB) technique enabled TEM/EDS examination on the cross section of the boundary film to provide direct measurement of the film thickness, visualization of the nanostructure, and analysis of composition. In addition, composition-depth profiles were generated using XPS aided by ion-sputtering to reveal the composition change at different levels of the boundary film to investigate the film formation process.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Variation of the Passive Film on Compositionally Concentrated Dual-Phase Al 0.3 Cr 0.5 Fe 2 Mn 0.25 Mo 0.15 Ni 1.5 Ti 0.3 and Implications for Corrosion

The passive film on a dual-phase Al 0.3 Cr 0.5 Fe 2 Mn 0.25 Mo 0.15 Ni 1.5 Ti 0.3 FCC + Heusler (L2 1 ) compositionally concentrated alloy formed during extended exposure to an applied potential in the passive range in dilute chloride solution was characterized. Each phase, with its own distinct composition of passivating elements, formed unique passive films separated by a heterophase interface. High-resolution, surface sensitive characterization enabled chemical analysis of the passive film formed over individual phases. The film formed over the L2 1 phase had a higher concentration of Al, Ni, and Ti, while the film formed over FCC phase was of similar thickness but contained comparatively higher Cr, Fe, and Mo concentrations, consistent with the differences in bulk microstructure composition. The passive film was continuous across phase boundaries and the distribution of passivating elements (Al, Cr, and Ti) indicated both phases were independently passivated. Spatially resolved analysis of the surface chemistry of the dual-phase CCA revealed that the cation with the highest composition in passive film formed on the FCC phase was Cr (52.4 at. pct) and for the L2 1 phase was Ti (53.1 at. pct) despite the bulk concentration of each element being below 20 at. pct in their respective phases. Al, Cr, and Ti were enriched in both phases within the passive film relative to their respective bulk compositions. In parallel studies, single-phase alloys with compositions representative of the FCC and L2 1 phases were synthesized to evaluate the corrosion behavior of each phase in isolation. The corrosion behavior of the dual-phase alloy showed passivity evidenced by a pitting potential of 0.615 V SCE in 0.01 M NaCl. The pitting potential and other electrochemical parameters suggested a combination of behaviors of both single-phase samples, suggesting that the global corrosion behavior may be represented by a composite theory applied to phases, their area fractions, and interphase length. However, the interphase in the dual-phase CCA was a local corrosion initiation site and may limit localized corrosion protectiveness. The alloy design implications for optimization of second phase structure and morphology are discussed.

36 MATERIALS SCIENCE↗

Kinetics and evolution of solid-state metal dealloying in thin films with multimodal analysis

Thin-film solid-state metal dealloying (thin-film SSMD) is an emerging technique that uses self-organization to design nanostructured thin films. The resulting 3D bicontinuous nanostructures are promising for a wide range of applications, such as catalysis and energy storage. In this work, we prepared thin films by SSMD using Ti-Cu as the parent alloy and Mg as the solvent. Using a multimodal approach, we combined synchrotron X-ray spectroscopy, diffraction, and high-resolution electron-based spectroscopy and imaging to study their morphological, structural, and chemical evolution. The processing-structure relationship was analyzed as a function of parent alloy composition and dealloying temperature and time. Morphological transitions from globular, to lamellar, to bicontinuous structures, in conjunction with a ligament size evolution, were identified as functions of the parent alloy composition. The dealloying rate increased with increasing concentration of interdiffusing elements (dissolving component) in the parent alloy. The parting limit, a dealloying compositional threshold, was systematically analyzed and determined to be 30%–40%. The order of crystalline phase formation is CuMg 2 , Cu 2 Mg, and Ti; the Ti phase first shows self-reorganization during dealloying, separate from the crystallization process. The coarsening in thin-film SSMD was identified and not entirely self-similar; in addition to the increase of ligament size over time, the formation of larger globular ligaments were also observed. This work furthers our fundamental understanding of thin-film SSMD and nanostructured thin-film design, where the thermodynamic and kinetic effects differ from the bulk counterparts. The fact that dealloying and diffusion outpaces the crystallization and new phase formation also offers opportunities to utilize thin-film SSMD in certain alloy systems in which deleterious intermetallic phases need to be suppressed, that may not be possible in the bulk geometry.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanoindentation study of niobium nitride thin films on niobium fabricated by reactive pulsed laser deposition

Nanomechanical and structural properties of NbN x films deposited on single crystal Nb using pulsed laser deposition for different substrate temperature were previously investigated as a function of film/substrate crystal structure (Mamun et al. (2012) [30]). In this study we focus on the effect of laser fluences and background nitrogen pressure on the nanomechanical and structural properties of NbN x films. The crystal structure and surface morphology of the thin films were tested by X-ray diffraction, scanning electron microscopy, and atomic force microscopy. Using nanoindentation, the investigation of the nanomechanical properties revealed that the hardness of the NbN x films was directly influenced by the laser fluence for low background nitrogen pressure, whereas the nanomechanical hardness showed no apparent correlation with laser fluence at high background nitrogen pressure. The NbN x film hardness measured at 30% film thickness increased from 14.0 ± 1.3 to 18.9 ± 2.4 GPa when the laser fluence was increased from 15 to 25 J/cm 2 at 10.7 Pa N 2 pressure. X-ray diffraction showed NbN x films with peaks that correspond to δ-NbN cubic and β-Nb 2 N hexagonal phases in addition to the δ'-NbN hexagonal phase. Finally, increasing the laser fluence resulted in NbN x films with larger grain sizes.

Mamun, Md Abdullah Al↗

Growth of epitaxial CdTe thin films on amorphous substrates using single crystal graphene buffer

Traditionally, a high-quality CdTe film can only be grown on a single crystal substrate with a small lattice mismatch. We report the epitaxy of CdTe films on monolayer single crystal graphene buffered amorphous SiO 2 /Si(100) substrates, despite a 86% lattice mismatch between CdTe(111) and graphene. X-ray pole figure, electron backscatter diffraction mapping and transmission electron microscopy all confirm that the epitaxial CdTe films are composed of two domains: the primary and the Σ3 twin. The crystal quality of films is shown to improve as the post-deposition annealing temperature increases. However, the rotational misalignment in CdTe remains large even after annealing. Through density functional theory calculations on the charge transfer distribution at the interface of CdTe and graphene, it is found that the interface is dominated by the weak van der Waals interaction, which explains the large spread of in-plane orientation in CdTe films. Furthermore, the rotational misalignment in graphene itself is also confirmed to produce the large in-plane orientation spread in CdTe films. Although imperfect in epitaxy quality, this work demonstrates that monolayer single crystal graphene can buffer amorphous substrates for growing epitaxial films, and hence hints an opportunity for developing advanced thin film devices using graphene as a template.

36 MATERIALS SCIENCE↗

Evaluation of hydrogen evolution reaction activity of molybdenum nitride thin films on their nitrogen content

We report preparation and electrochemical properties of molybdenum nitride Mo x N (x from 1 to 2) and Mo thin films prepared by the magnetron sputtering. We adjusted amount of nitrogen during reactive sputtering, to achieve different ratios of Mo:N in the films.We could prepare well-defined and extremely smooth films. We determined hydrogen evolution reaction (HER) activity and other kinetics parameters such as Tafel slopes and exchange current densities. Corrosion stability at anodic potentials was also evaluated from onset potentials of dissolution of prepared films. We found that Mo x N thin film HER activity dependence on nitrogen content in the film exhibits volcano-like diagram. From XRD measurements we identified several phases present in the films from pure Mo to β-Mo 2 N and δ-MoN. We find that β-Mo 2 N phase has the highest HER activity. Stability of studied nitrides at anodic potentials increases with increasing content of nitrogen. Mo films sputtered at high substrate temperatures exhibit higher HER activity than Mo x N systems. Furthermore, with increasing substrate temperature during sputtering, HER activity of pure Mo thin films increases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the oxide film on 308L weld surface produced during welding process

Highlights: • Double layer film formed under welding of no shielding was first deeply studied. • Micro-cracks and nano-scale gaps were found in outer and inner layer. • Outer layer was composed of Fe{sub 2}O{sub 3}, inner layer included Fe{sub 3}O{sub 4} and FeCr{sub 2}O{sub 4.} • Cr deficiency of film related to the volatilization of CrO{sub 3} over 1000 °C. • Oxidation rule of 308L weld during GTAW was found based on thermodynamics. The oxide film formed during welding on the inner surface of 308L weld was investigated. The morphology, composition and structure of the oxide film were characterized by optical microscopy, scanning electron microscopy, laser Raman spectroscopy, X-ray diffraction, Auger electron spectroscopy and transmission electron microscopy. The results indicated that the oxidation degree of the weld metal was generally uniform from the weld center to the fusion line. Micro-scale cracks were found on the outer surface of the oxide film and nano-scale gaps scattered on the inner oxide film-weld interface. The oxide film exhibited a duplex structure including outer and inner layers. The outer layer, made of tightly bound particles, was mainly composed of Fe{sub 2}O{sub 3} oxide particles with a diameter of 50–150 nm. And the inner layer, made of relative loosely bound particles, was mainly composed of Fe{sub 3}O{sub 4} and FeCr{sub 2}O{sub 4} oxide particles with a diameter of 10–50 nm. The corresponding oxidation behavior and mechanism of the oxide film were also discussed.

36 MATERIALS SCIENCE↗

Solution precursor plasma deposition of nanostructured CdS thin films

Highlights: Black-Right-Pointing-Pointer Inexpensive process with capability to produce large scale nanostructured coatings. Black-Right-Pointing-Pointer Technique can be employed to spray the coatings on any kind of substrates including polymers. Black-Right-Pointing-Pointer The CdS coatings developed have good electrical conductivity and optical properties. Black-Right-Pointing-Pointer Coatings possess large amount of particulate boundaries and nanostructured grains. -- Abstract: Cadmium sulfide (CdS) films are used in solar cells, sensors and microelectronics. A variety of techniques, such as vapor based techniques, wet chemical methods and spray pyrolysis are frequently employed to develop adherent CdS films. In the present study, rapid deposition of CdS thin films via plasma spray route using a solution precursor was investigated, for the first time. Solution precursor comprising cadmium chloride, thiourea and distilled water was fed into a DC plasma jet via an axial atomizer to create ultrafine droplets for instantaneous and accelerated thermal decomposition in the plasma plume. The resulting molten/semi-molten ultrafine/nanoparticles of CdS eventually propel toward the substrate to form continuous CdS films. The chemistry of the solution precursor was found to be critical in plasma pyrolysis to control the stoichiometry and composition of the films. X-ray diffraction studies confirmed hexagonal {alpha}-CdS structure. Surface morphology and microstructures were investigated to compare with other synthesis techniques in terms of process mechanism and structural features. Transmission electron microscopy studies revealed nanostructures in the atomized particulates. Optical measurements indicated a decreasing transmittance in the visible light with increasing the film thickness and band gap was calculated to be {approx}2.5 eV. The electrical resistivity of the films (0.243 {+-} 0.188 Multiplication-Sign 10{sup 5} {Omega} cm) was comparable with the literature values. These nanostructured polycrystalline CdS films could be useful in sensing and solar applications.

36 MATERIALS SCIENCE↗

Correlation Between Optical Properties And Chemical Composition Of Sputter-deposited Germanium Cxide (GeO x ) Films

Germanium oxide (GeO x ) films were grown on (1 0 0) Si substrates by reactive Direct-Current (DC) magnetron sputter-deposition using an elemental Ge target. The effects of oxygen gas fraction, Г = O 2 /(Ar + O 2 ), on the deposition rate, structure, chemical composition and optical properties of GeOx films have been investigated. The chemistry of the films exhibits an evolution from pure Ge to mixed Ge + GeO + GeO 2 and then finally to GeO 2 upon increasing Г from 0.00 to 1.00. Grazing incidence X-ray analysis indicates that the GeO x films grown were amorphous. The optical properties probed by spectroscopic ellipsometry indicate that the effect of Г is significant on the optical constants of the GeO x films. The measured index of refraction (n) at a wavelength (λ) of 550 nm is 4.67 for films grown without any oxygen, indicating behavior characteristic of semiconducting Ge. The transition from germanium to mixed Ge + GeO + GeO 2 composition is associated with a characteristic decrease in n (λ = 550 nm) to 2.62 and occurs at Г = 0.25. Finally n drops to 1.60 for Г = 0.50–1.00, where the films become GeO 2 . A detailed correlation between Г, n, k and stoichiometry in DC sputtered GeO x films is presented and discussed.

36 MATERIALS SCIENCE↗

Formation and degradation mechanism of methylammonium lead iodide perovskite thin film fabricated by electrospray technique

Electrospray deposition technique has been reported previously for fabricating effective and stable perovskite thin film, leading to efficient perovskite solar cells. Here, in this work, a comprehensive investigation of the formation mechanism of methylammonium lead iodide perovskite (CH 3 NH 3 PbI 3 ) film by electrospray technique is demonstrated and compared to the formation mechanism through the conventional spin coating technique. In the electrospray process, charged MAI nanoparticles are gradually introduced onto the PbI 2 film, intercalating within the PbI 2 structure to produce the perovskite film. In contrast, the spin-coating method involves supplying the MAI solution in bulk, leading to perovskite crystal formation through the dissolution of the PbI 2 layer by the MAI solution, followed by recrystallization into perovskite oriented in the [110] direction, 30° inclined to the substrate. The impact of charge and the electric field on the formation of perovskite film using the electrospray is explored. Furthermore, the intrinsic stability of perovskite films is monitored in real-time in a highly humid environment (≥80 % relative humidity (RH)) using in-situ Grazing Incidence Wide Angle X-ray Scattering (GIWAXS), and a degradation mechanism is proposed to enhance the durability of the perovskite-based devices. The study further delves into the comparison of the stability of electrosprayed and spin-coated perovskite film, and the impact of humidity level and the presence of a hole-transporting layer on the stability of the perovskite layer. Overall, this work provides a detailed understanding of the formation and humidity-induced degradation mechanism of electrosprayed perovskite films, offering insights that can extend to various applications of perovskite materials.

14 SOLAR ENERGY↗

Thickness dependence of Al 0.88 Sc 0.12 N thin films grown on silicon

The thickening behavior of aluminum scandium nitride (Al 0.88 Sc 0.12 N) films grown on Si(111) substrates has been investigated experimentally using X-ray diffraction (XRD), transmission electron microscopy (TEM), atomic force microscopy, and residual stress measurement. Al 0.88 Sc 0.12 N films were grown with thicknesses spanning 14 nm to 1.1 um. TEM analysis shows that the argon sputter etch used to remove the native oxide prior to deposition produced an amorphous, oxygen-rich surface, preventing epitaxial growth. XRD analysis of the films show that the A1ScN(002) orientation improves as the films thicken and the XRD A1ScN(002) rocking curve full width half maximum decreases to 1.34 q for the 1.1 pm thick film. XRD analysis shows that the unit cell is expanded in both the a- and c-axes by Sc doping; the a-axis lattice parameter was measured to be 3.172 ± 0.007 A and the c-axis lattice parameter was measured to be 5.000 ± 0.001 A, representing 1.96% and 0.44% expansions over aluminum nitride lattice parameters, respectively. The grain size and roughness increase as the film thickness increases. A stress gradient forms through the film; the residual stress grows more tensile as the film thickens, from -1.24 GPa to +8.5MPa.

36 MATERIALS SCIENCE↗

Superconducting magnesium diboride films for levitation of laser targets

Inertial confinement fusion targets would benefit from being levitated inside hohlraums to avoid capsule support-related implosion perturbations. Levitation inside a magnetic trap requires coating the capsule with a thin film that is superconducting at 20 K. Such non-epitaxial film growth on non-planar substrates is challenging. Here, we study Mg vapor annealing and solid-phase reactive inter-diffusion methods to form superconducting magnesium diboride (MgB 2 ) films on different planar and spherical carbon substrates, evaluating glassy carbon, polycrystalline diamond made by chemical vapor deposition, and carbon deposited by magnetron sputtering of graphite targets. Thin films of B and Mg are produced by magnetron sputtering onto stationary planar or rolling spherical substrates and annealed at either 600 or 850 °C in Mg vapor. The films are characterized by a combination of high-energy ion scattering, electron microscopy, and magnetometry. Results show that the critical superconducting temperature of resultant films depends on film microstructure and oxygen impurity content. The formation of MgB 2 films is also strongly substrate dependent, even in this case of non-epitaxial growth. Important factors to consider are oxygen outgassing of the substrate during thermal processing, substrate surface roughness, and the matching of thermal expansion coefficients of different layers in the multilayer structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonstoichiometry, Structure, and Properties of BiFeO 3 Films

In this work, we explore the effect of growth conditions on the cation and anion chemistry, electrical leakage, conduction mechanisms, and ferroelectric and dielectric behavior of BiFeO 3 . Although it is possible to produce single-phase, coherently strained films in all cases, small variations in the pulsed-laser deposition growth process, specifically the laser repetition rate and target composition, result in films with chemistries ranging from 10% Bi-deficiency to 4% Bi-excess and films possessing Bi gradients as large a 6% across the film thickness. Corresponding variations and gradients in the O chemistry are also observed. As a result of the varying film chemistry, marked differences in surface and domain morphology are observed wherein Bi-deficiency stabilizes atomically smooth surfaces and ordered stripe domains. Subsequent investigation of the current-voltage response reveals large differences in leakage current density arising from changes in both the overall stoichiometry and gradients. In turn, the film stoichiometry drives variations in the dominant conduction mechanism including examples of Schottky, Poole-Frenkel, and modified Poole-Frenkel emission depending on the film chemistry. Lastly, slightly Bi-excess films are found to exhibit the best low-frequency ferroelectric and dielectric response while increasing Bi-deficiency worsens the low-frequency ferroelectric performance and reduces the dielectric permittivity.

36 MATERIALS SCIENCE↗

Overcoming Short-Circuit in Lead-Free CH 3 NH 3 SnI 3 Perovskite Solar Cells via Kinetically Controlled Gas–Solid Reaction Film Fabrication Process

The development of Sn-based perovskite solar cells has been challenging because devices often show short-circuit behavior due to poor morphologies and undesired electrical properties of the thin films. A low-temperature vapor-assisted solution process (LT-VASP) has been employed as a novel kinetically controlled gas–solid reaction film fabrication method to prepare lead-free CH 3 NH 3 SnI 3 thin films. We show that the solid SnI 2 substrate temperature is the key parameter in achieving perovskite films with high surface coverage and excellent uniformity. The resulting high-quality CH 3 NH 3 SnI 3 films allow the successful fabrication of solar cells with drastically improved reproducibility, reaching an efficiency of 1.86%. Furthermore, our Kelvin probe studies show the VASP films have a doping level lower than that of films prepared from the conventional one-step method, effectively lowering the film conductivity. Above all, with (LT)-VASP, the short-circuit behavior often obtained from the conventional one-step-fabricated Sn-based perovskite devices has been overcome. Finally, this study facilitates the path to more successful Sn-perovskite photovoltaic research.

14 SOLAR ENERGY↗

Stretching and Bending Moduli of Bilayer Films Inferred from Wrinkle Patterns

Wrinkling patterns were used to investigate the mechanical properties of thin poly­(styrene) (PS)/poly­(methyl methacrylate) (PMMA) and PS/gold (Au) bilayer films. Films were floated on water with a water drop on the surface to induce wrinkling. The thicknesses and thickness ratios of the films were varied over a broad range. The PS/PMMA bilayer was chosen to provide a contrast in wetting properties, with equilibrium contact angles of θPMMA = 68° and θPS = 88° with water. The PS/Au bilayer was chosen to provide a large contrast in Young’s moduli, E Au = 72 GPa and E PS = 3.4 GPa. The stretching (Y) and bending (B) moduli of the bilayer films were obtained from measurements of the length and number of wrinkles in the wrinkle patterns. The experimentally derived values of Y and B were in reasonable agreement with the values computed from the bulk Young’s moduli and the thicknesses of the two components in the bilayer. The values of Y and B did not depend on which face of the film was exposed to the water droplet or bath when the capillary stresses were considered. Thus, finite size effects from the film thicknesses were unimportant over the range of thicknesses studied, and no relative displacement of the films was found, with the films remaining well-bonded even with deformation associated with wrinkling.

Chang, Jooyoung↗

Defect Annihilation in the Directed Self-Assembly of Block Copolymers in Films with Increasing Thickness.

We investigate directed self-assembly (DSA), with 3x density multiplication, of symmetric polystyrene-block-poly(methyl methacrylate) (L-0 = 28 nm) with increasing film thicknesses and reveal a thickness limit above which the defect annihilation mechanism is different than in thinner films. Block copolymer films of increasing thickness underwent DSA on a macroscopic chemical pattern under optimum geometrical and chemical conditions. Scanning electron microscopy and grazing-incidence small-angle X-ray scattering (GISAXS) were used to characterize the long-range ordering and buried structures as a function of film thickness and thermal annealing time. Rotational GISAXS measurements revealed a critical thickness of similar to 3L(0,) below which defect annihilation is cooperative across the film depth and above which it is faster at the free surface than in the film's interior. In the latter case, defects can persist in the film's interior despite perfect assembly and registration at the free surface of the film.

Chen, Xuanxuan↗