Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Physical model and experimental validation of a high temperature proton exchange membrane electrochemical hydrogen pump cell for efficient single-stage extraction of low concentration hydrogen gas

There is interest in valorization of existing natural gas infrastructure to facilitate the co-transportation of hydrogen via blending of hydrogen gas initially at limited concentrations of 1–20 vol% H2 and to subsequently extract hydrogen at fuel cell quality standards (SAE J2719/ISO14687-2). High temperature proton exchange membrane electrochemical hydrogen pump (HT-PEM EHP) based on phosphoric acid doped polybenzimidazole (PA-PBI) exhibits good performance at elevated temperatures (>120 °C), which provides desirable tolerance to non-methane natural gas constituents that are problematic for lower temperature based EHP. To better understand the suitability of the HT-PEM EHP for such gas separation processes, a two-dimensional model of EHP based on PA-PBI was developed. The model is validated for several relevant operating conditions and across cells with differing amounts of phosphoric acid content in the electrodes. Operando micro x-ray computed tomography (CT) imaging of an HT-PEM EHP was used to further validate physical parameters and assumptions of the model. The impacts of pressure, relative humidity of the anode feed, and concentration of feed gases on separation performance are investigated. This study shows that a specific energy of separation of 5.1 kWh/kg H2 at a hydrogen recovery factor (HRF) of 50 vol% can be achieved in a single stage with the EHP, producing fuel cell quality hydrogen purity of 99.99 vol% H2 from a 2 vol% H2/CH4 feed blend, while pressurizing the product H2 at a pressure ratio of 1.3 relative to feed pressure.

Stansberry, John M↗

Automated thermal extraction-desorption gas chromatography mass spectrometry: A multifunctional tool for comprehensive characterization of polymers and their degradation products

The TED-GC–MS analysis is a two-step method. A sample is first decomposed in a thermogravimetric analyzer (TGA) and the gaseous decomposition products are then trapped on a solid-phase adsorber. Subsequently, the solid-phase adsorber is analyzed with thermal desorption gas chromatography mass spectrometry (TDU-GC–MS). This method is ideally suited for the analysis of polymers and their degradation processes. A new entirely automated system is introduced which enables high sample throughput and reproducible automated fractioned collection of decomposition products. The fractionated collection together with low temperatures reduces the risk of contamination, improves instrumental stability and minimizes maintenance efforts. Through variation of the two main parameters (purge gas flow and heating rate) it is shown how the extraction process can be optimized. By measuring the decomposition products of polyethylene it is demonstrated that compounds with masses of up to 434 Da can be detected. This is achieved despite the low temperature (˜40 °C) of the solid-phase adsorber and the low thermal desorption temperature of 200 °C in the TDU unit. It is now shown that automated TED-GC–MS represents a new flexible multi-functional method for comprehensive polymer analyses. Comparable polymer characterization was previously only achievable through a combination of multiple independent analytical methods. This is demonstrated by three examples focused on practical challenges in materials analysis and identification: The first one is the analysis of wood plastic composites for which the decomposition processes of the polymer and the bio polymer (wood) could be clearly distinguished by fractionated collection using sequential adsorbers. Secondly, a fast quantitative application is shown by determining the weight concentrations of an unknown polyolefin blend through comparison with a reference material. Additionally, the determination of microplastic concentrations in environmental samples is becoming an increasingly important analytical necessity. It is demonstrated that with TED-GC–MS calibration curves showing good linearity for the most important precursors for microplastic, even complex matrix materials (suspended particulate matter) can be successfully analyzed.

36 MATERIALS SCIENCE↗

Extraction chromatography of 225 Ac and lanthanides on N,N-dioctyldiglycolamic acid /1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide solvent impregnated resin

The alpha-emitter 225 Ac (t 1/2 = 9.92 d) is currently under development for targeted alpha-particle therapy of cancer, and accelerator production of 225 Ac via proton irradiation of thorium targets requires robust separations of 225 Ac from chemically similar fission product lanthanides. Additionally, the lanthanide elements represent critical components in modern technologies, and radiolanthanides such as 140 Nd (t 1/2 = 3.37 d) also have potential application in the field of nuclear medicine. The ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Bmim][NTf 2 ]), combined with the diglycolamide extractant, N,N-dioctyldiglycolamic acid (DODGAA), was adsorbed on macroporous resin support to produce a solvent impregnated resin (SIR) that was investigated for separations of 225 Ac and lanthanides. The equilibrium distribution coefficients (Kd) of the rare earth elements (Sc(III), Y(III), Ln(III)), 225 Ac(III), Th(IV), and U(VI) on the prepared DODGAA/[Bmim][NTf 2 ]-SIR were determined from batch adsorption experiments in HCl and HNO 3 media. The DODGAA/[Bmim][NTf2]-SIR exhibited preferential uptake of the heavier lanthanide elements while allowing for the separation of the lighter lanthanides. Column separations utilizing the DODGAA/[Bmim][NTf 2 ]-SIR were effective at separating the lighter lanthanides from each other, and separating 225 Ac from a mixture of lanthanides, 213 Bi, and 225 Ra without the need for additional complexing agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rare earth ion-adsorption clays in the presence of iron at basic pH: Adsorption mechanism and extraction method

In this work, the uptake mechanism and influence of iron (Fe) co-adsorption on the binding of rare-earth elements (REEs) on kaolinite have been investigated. REEs and varying concentrations of Fe were co-adsorbed onto kaolinite at pH 10.5. Inductively coupled plasma mass spectrometry (ICP-MS), powder X-ray diffraction (PXRD), and X-ray photoelectron spectroscopy (XPS) were used to characterize how Fe co-adsorption influenced the uptake mechanism of REEs on kaolinite. Elemental analysis by ICP-MS revealed that the REE concentrations on kaolinite were unaffected by the presence of Fe. Crystal structure of kaolinite, determined by PXRD, was not altered after REE and Fe co-adsorption. XPS suggests that the adsorbed Fe is in the form of FeOOH, while the greatly attenuated REE XPS signals upon Fe co-adsorption implies that REEs are encapsulated by Fe species. Based on these results, we conclude that FeOOH layers were formed on top of REEs on the surface of kaolinite. Synthesized REE-Fe-kaolinite samples respond poorly to ion-exchange leaching, indicating that Fe is detrimental to the REE ion-exchange efficiency. The inhibition of ion-exchange REE extraction appears to be due to the passivating FeOOH layers. In contrast to ion-exchange methods, reductive leaching was found to dissolve the FeOOH passivating layers and liberate REEs such that they became available for ion-exchange leaching.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear effects in the extraction of laminar flame speeds from expanding spherical flames

Various factors affecting the determination of laminar flames speeds from outwardly propagating spherical flames in a constant-pressure combustion chamber were considered, with emphasis on the nonlinear variation of the stretched flame speed to the flame stretch rate, and the associated need to nonlinearly extrapolate the stretched flame speed to yield an accurate determination of the laminar flame speed and Markstein length. Experiments were conducted for lean and rich n-butane/air flames at 1atm initial pressure, demonstrating the complex and nonlinear nature of the dynamics of flame evolution, and the strong influences of the ignition transient and chamber confinement during the initial and final periods of the flame propagation, respectively. These experimental data were analyzed using the nonlinear relation between the stretched flame speed and stretch rate, yielding laminar flame speeds that agree well with data determined from alternate flame configurations. It is further suggested that the fidelity in the extraction of the laminar flame speed from expanding spherical flames can be facilitated by using small ignition energy and a large combustion chamber. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Potassium carbonate decomposition modeling within rotating detonation engines for direct power extraction applications

We report that recently, there has been a significant interest in detonation-based combustion systems, such as rotating detonation engines (RDE), due to potential performance advantages in propulsion and energy applications. This includes improvements in thermodynamic efficiency, inherently high gas velocities, and the possibility of achieving an increase in total pressure (i.e. pressure gain) through the combustion process. Due to approximating a constant volume combustion process, these devices also tend to exhibit extremely high local gas temperatures relative to a comparable constant pressure combustor. These advantages overlap well with desirable performance characteristics of direct power extraction (DPE) technologies, such as a magnetohydrodynamic (MHD) generator. Typically, in DPE systems hot combustion products are seeded with an easily ionizable material such as potassium carbonate (K 2 CO 3 ) in order to boost the electrical conductivity. However, due to the short gas residence times within an RDE, it was unclear whether forming an electrically conductive combustion plasma would be feasible for integration with a downstream MHD generator. A model is presented which describes the heating, decomposition, and ionization of solid K 2 CO 3 particles and aqueous solutions of K 2 CO 3 in water, for a given initial particle diameter. This model was combined with available computational fluid dynamics (CFD) data for an oxygen-methane RDE in a one-way coupled Eulerian-Lagrangian framework to predict particle trajectories and the corresponding heating, decomposition, and ionization histories. Electrical conductivities were computed using a previously developed model, and a method was proposed to determine an equivalent average electrical conductivity. Results show that particle sizes below ~30 µm are able to fully decompose before reaching the exit of the RDE. While the one-way coupled nature of the simulations precluded rigorous evaluation of the effects of seed material on detonability, a substantial temperature reduction is expected at the detonation wave front due to heating and decomposition. A preliminary comparison is presented between the RDE and an equivalent constant pressure adiabatic combustor, showing a potential performance advantage for the RDE.

42 ENGINEERING↗

Extracting data from the muck: deriving biological insight from complex microbial communities and non-model organisms with next generation sequencing

It is becoming increasingly clear that microbes within microbial communities, for which cultured isolates have not yet been obtained, have an immense, untapped reservoir of enzymes that could help address grand challenges in human health, energy, and sustainability. Despite the obstacles associated with culturing these microbes, recent advances in next-generation sequencing (NGS) have made it possible to explore complex microbial communities in their native context for the first time. Key to extracting meaning from rapidly growing NGS datasets are bioinformatics tools that assemble the sequence data, annotate homologous sequences and interrogate it to reveal regulatory patterns. Complementing this are advances in proteomics that can link NGS data to biological function. Finally, this combination of next generation sequencing, proteomics and bioinformatic analysis forms a powerful tool to study non-model microbes, which will transform what we know about these dynamic systems.

59 BASIC BIOLOGICAL SCIENCES↗

Oil extraction in the Amazon basin and exposure to metals in indigenous populations

Highlights: • We assessed the body burdens of metals in two kukama communities after oil spills. • Median Hg levels were above values recommended by the Peruvian Ministry of Health. • 50% of the population had Hg levels higher than those recommended. • 17% of the study population had Cd levels higher than those recommended. • Oil spills may be a source of exposure to metals but other sources may contribute. Most oil extraction areas in the Peruvian Amazon are within indigenous territories. Poor environmental practices have exposed the indigenous population to metals. We conducted a survey in two indigenous Kukama communities to assess body burdens of metals after the occurrence of two major oil spills in 2014. Urine levels above those recommended by the Peruvian Ministry of Health were observed in 50% and 17% of the study population for mercury and cadmium, respectively.

54 ENVIRONMENTAL SCIENCES↗

Plasticizer, di(2-ethylhexyl)phthalate (DEHP) enhances cockroach allergen extract-driven airway inflammation by enhancing pulmonary Th2 as well as Th17 immune responses in mice

Highlights: • DEHP enhances CE-induced airway inflammation/mucus secretion in mice. • DEHP enhances expression of costimulatory molecules on dendritic cells. • DEHP enhances expression of pro-inflammatory cytokines in dendritic cells. • DEHP down regulates expression of E-cadherin in airway epithelial cells. In recent decades, there has been a gradual increase in the prevalence of asthma. Various factors including environmental pollutants have contributed to this phenomenon. Plasticizer, di(2-ethylhexyl)phthalate (DEHP) is one of the commonest environmental pollutants due to its association with plastic products. DEHP gets released from plastic products easily leading to respiratory exposure in humans. As a consequence, DEHP is associated with allergic asthma in humans and animals. DEHP is reported to act as an adjuvant in ovalbumin-induced mouse models of asthma at high doses. However, these studies mostly looked into the role of DEHP on Th2 cytokines/eosinophilic inflammation without investigating the role of airway epithelial cells (AECs)/dendritic cells (DCs)/Th17 cells. Its adjuvant activity with natural allergens such as cockroach allergens at tolerable daily intake needs to be explored. Cockroach allergens and DEHP may be inhaled together due to their coexistence in work place as well as household environments. Therefore, effect of DEHP was assessed in cockroach allergens extract (CE)-induced mouse model of asthma. Airway inflammation, histopathology, mucus secretion, and immune responses related to Th2/Th17/DCs and AECs were assessed in mice with DEHP exposure alone and in combination with CE. Our study shows that DEHP converts CE-induced eosinophilic inflammation into mixed granulocytic inflammation by promoting Th2 as well as Th17 immune responses. This was probably due to downregulation of E-cadherin in AECs, and enhancement of costimulatory molecules (MHCII/CD86/CD40)/pro-inflammatory cytokines (IL-6/MCP-1) in DCs by DEHP. This suggests that DEHP facilitates development of mixed granulocytic airway inflammation in the presence of a natural allergen.

54 ENVIRONMENTAL SCIENCES↗

Investigating the role of water on CO2-Utica Shale interactions for carbon storage and shale gas extraction activities – Evidence for pore scale alterations

In this work, we probed the physical and chemical alteration of the carbonate-rich Utica Shale following CO 2 exposure when thin films of water were present at the shale surface. All reaction conditions were examined at 40 °C and CO 2 pressures up to 10.3 MPa for 14 days. CO 2 dissolution in the water layer at 2342 cm -1 and carbonate dissolution and precipitation at 1424, 874, and 712 cm -1 were discerned with in-situ Fourier Transform infrared spectroscopy (FT-IR). Significant etching and pitting from exposure to CO 2 and water were observed with feature relocation scanning electron microscopy (SEM). Application of the density function theory (DFT) for pore size analysis showed that micropores between approximately 0.9 and 2 nm disappeared while the mesopore volume increased after dissolution of carbonate. These results may provide new insights that carbonate rich shales such as the Utica may have a greater potential for alterations of pore space due to the reactivity of CO 2 which may affect 1) how CO 2 storage in shale formations plays a role in Carbon Capture and Storage (CCS) activities, 2) if CO 2 can be utilized as a potential fracturing agent, and 3) whether CO 2 is an effective fluid for enhanced hydrocarbon extraction.

04 OIL SHALES AND TAR SANDS↗

Opportunities for increasing CO 2 storage in deep, saline formations by active reservoir management and treatment of extracted formation water: Case study at the GreenGen IGCC facility, Tianjin, PR China

Carbon capture, utilization and storage (CCUS) seeks beneficial applications for CO 2 recovered from fossil fuel combustion. This study evaluated the potential for removing formation water to create additional storage capacity for CO 2 , while simultaneously treating the produced water for beneficial use. Furthermore, the process would control pressures within the target formation, lessen the risk of caprock failure, and better control the movement of CO 2 within that formation. The project plans to highlight the method of using individual wells to produce formation water prior to injecting CO 2 as an efficient means of managing reservoir pressure. Because the pressure drawdown resulting from pre-injection formation water production will inversely correlate with pressure buildup resulting from CO 2 injection, it can be proactively used to estimate CO 2 storage capacity and to plan well-field operations. The project studied the GreenGen site in Tianjin, China where Huaneng Corporation is capturing CO 2 at a coal fired IGCC power plant. Known as the Tianjin Enhanced Water Recovery (EWR) project, local rock units were evaluated for CO 2 storage potential and produced water treatment options were then developed. Average treatment cost for produced water with a cooling water treatment goal ranged from 2.27 to 2.96 US$/m 3 (recovery 95.25%), and for a boiler water treatment goal ranged from 2.37 to 3.18 US$/m 3 (recovery 92.78%). Importance analysis indicated that water quality parameters and transportation are significant cost factors as the injection-extraction system is managed over time. Our study found that in a broad sense, active reservoir management in the context of CCUS/EWR is technically feasible. In addition, criteria for evaluating suitable vs. unsuitable reservoir properties, reservoir storage (caprock) integrity, a recommended injection/withdrawal strategy and cost estimates for water treatment and reservoir management are proposed.

54 ENVIRONMENTAL SCIENCES↗

Impact of nonaqueous phase liquid (NAPL) source zone architecture on mass removal mechanisms in strongly layered heterogeneous porous media during soil vapor extraction

An existing multiphase flow simulator was modified in order to determine the effects of four mechanisms on NAPL mass removal in a strongly layered heterogeneous vadose zone during soil vapor extraction (SVE): a) NAPL flow, b) diffusion and dispersion from low permeability zones, c) slow desorption from sediment grains, and d) rate-limited dissolution of trapped NAPL. The impact of water and NAPL saturation distribution, NAPL type (i.e., free, residual, or trapped) distribution, and spatial heterogeneity of the permeability field on these mechanisms were evaluated. Two different initial source zone architectures (one with and one without trapped NAPL) were considered and these architectures were used to evaluate seven different SVE scenarios. For all runs, slow diffusion from low permeability zones that gas flow bypassed was a dominant factor for diminished SVE effectiveness at later times. This effect was more significant at high water saturation due to the decrease of gas-phase relative permeability. Transverse dispersion contributed to fast NAPL mass removal from the low permeability layer in both source zone architectures, but longitudinal dispersion did not affect overall mass removal time. Both slow desorption from sediment grains and rate-limited mass transfer from trapped NAPL only marginally affected removal times. However, mass transfer from trapped NAPL did affect mass removal at late time, as well as the NAPL distribution. NAPL flow from low to high permeability zones contributed to faster mass removal from the low permeability layer, and this effect increased when water infiltration was eliminated. These simulations indicate that if trapped NAPL exists in heterogeneous porous media, mass transfer can be improved by delivering gas directly to zones with trapped NAPL and by lowering the water content, which increases the gas relative permeability and changes trapped NAPL to free NAPL.

54 ENVIRONMENTAL SCIENCES↗

A new augmentation based algorithm for extracting maximal chordal subgraphs

If every cycle of a graph is chordal length greater than three then it contains an edge between non-adjacent vertices. Chordal graphs are of interest both theoretically, since they admit polynomial time solutions to a range of NP-hard graph problems, and practically, since they arise in many applications including sparse linear algebra, computer vision, and computational biology. A maximal chordal subgraph is a chordal subgraph that is not a proper subgraph of any other chordal subgraph. Existing algorithms for computing maximal chordal subgraphs depend on dynamically ordering the vertices, which is an inherently sequential process and therefore limits the algorithms’ parallelizability. In our paper we explore techniques to develop a scalable parallel algorithm for extracting a maximal chordal subgraph. We demonstrate that an earlier attempt at developing a parallel algorithm may induce a non-optimal vertex ordering and is therefore not guaranteed to terminate with a maximal chordal subgraph. We then give a new algorithm that first computes and then repeatedly augments a spanning chordal subgraph. After proving that the algorithm terminates with a maximal chordal subgraph, we then demonstrate that this algorithm is more amenable to parallelization and that the parallel version also terminates with a maximal chordal subgraph. That said, the complexity of the new algorithm is higher than that of the previous parallel algorithm, although the earlier algorithm computes a chordal subgraph which is not guaranteed to be maximal. Finally, we experimented with our augmentation-based algorithm on both synthetic and real-world graphs. We provide scalability results and also explore the effect of different choices for the initial spanning chordal subgraph on both the running time and on the number of edges in the maximal chordal subgraph.

97 MATHEMATICS AND COMPUTING↗

Unique properties of α-NaFeO{sub 2}: De-intercalation of sodium via hydrolysis and the intercalation of guest molecules into the extract solution

Graphical abstract: - Highlights: • Facile de-intercalating Na from NaFeO2. • Formation of layered sodium hydrogen carbonate hydrate. • Intercalation chemistry on layered sodium hydrogen carbonate hydrate. - Abstract: We report on a versatile method for the de-intercalation of Na from α-NaFeO{sub 2} by using water to produce α-Na{sub 1−x}FeO{sub 2}, where x ≈ 1. This de-intercalation technique provides an excellent route to ion exchange Na with other metal ions in α-NaFeO{sub 2}. The hydrolysis mechanism is provided. We show that the extracted solution captures CO{sub 2} from the atmosphere leading to the formation of sodium hydrogen carbonate hydrate crystals. The lamellar structure of the hydrate crystals was confirmed by powder X-ray diffraction, and were found Na-deficient via elemental analysis. Intercalation of guest molecules such as polymers, alcohols, and inorganic ions into the gallery space of the newly formed sodium hydrogen carbonate hydrate crystals was demonstrated by the use of powder X-ray diffraction technique. The reported materials were also characterized by Mössbauer spectroscopy, thermogravimetric analysis, differential scanning calorimetry, infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy.

36 MATERIALS SCIENCE↗

Characterization, antioxidant and cytotoxicity evaluation of green synthesized silver nanoparticles using Cleistanthus collinus extract as surface modifier

Graphical abstract: The figure is the TEM image of green synthesized silver nanoparticles from Cleistanthus collinus. In this investigation we have used the poisonous plant as a reducing and capping agent. This is a first time data to synthesis the metal nanoparticles using poisonous plant. - Highlights: • A hitherto unreported venomous plant mediated AgNPs synthesis. • The particle size is observed in the range of 20–40 nm. • Surface morphology of the well-dispersed silver nanoparticles is studied using SEM and TEM. • Crystalline nature of AgNPs is confirmed by X-ray diffraction analysis. • Antioxidant activities of green synthesized AgNPs are tested in vitro. - Abstract: We report, here a simple green method for the preparation of silver nanoparticles (AgNPs) using the plant extract of Cleistanthus collinus as potential phyto reducer. The synthesized AgNPs were characterized by UV–vis spectra, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The obtained results confirmed that the AgNPs were crystalline in nature and the morphological studies reveal the spherical shape of AgNPs with size ranging from 20 to 40 nm. The in vitro antioxidant activity of AgNPs showed a significant effect on scavenging of free radicals. The cytotoxicity study exhibited a dose-dependent effect against human lung cancer cells (A549) and normal cells (HBL-100), the inhibitory concentration (IC{sub 50}) were found to be 30 μg/mL and 60 μg/mL respectively. The in vivo histopathology of mouse organs proved that AgNPs does not possess toxic effect and can be extensively applied in biomedical sciences.

36 MATERIALS SCIENCE↗

Photosynthesis of silver nanoparticles using Durio zibethinus aqueous extract and its application in catalytic reduction of nitroaromatics, degradation of hazardous dyes and selective colorimetric sensing of mercury ions

Highlights: • Sunlight mediated synthesis of silver nanoparticles. • dAgNPs serves as an excellent catalyst to degrade organic dyes. • The degraded organic dyes are nontoxic. • dAgNPs colorimetrically detects mercury ions at micromolar concentration. - Abstract: A simple green route was reported to prepare highly stable silver nanoparticles. The aqueous leaf extract of Durio zibethinus reduces Ag+ to Ag0 in the presence of natural sunlight. The capping and stabilization of dAgNPs by the phytoconstituents of Durio zibethinus was confirmed by FTIR. TEM confirms that the dAgNPs are spherical in shape with a size range between 10–25 nm. XRD pattern confirmed that the dAgNPs are arranged in the face-centred cubic structure. The catalytic activity of the dAgNPs was proved by sodium borohydride mediated reduction of nitro aromatic compounds and degradation hazardous organic dyes. The reaction kinetics was analysed by pseudo-first order equation. Regardless of the efficacy of degrading organic dyes, we showed by zebrafish mortality assay that the toxicity of the dye degraded water reduced drastically. Besides catalysis, the dAgNPs has the potential to selective colorimetric sensing of hazardous mercury ion in aqueous solution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hyperspectral imaging for real-time waste materials characterization and recovery using endmember extraction and abundance detection

Hyperspectral imaging, combined with advanced spectral unmixing techniques and artificial intelligence, offers a powerful solution for improving material identification and classification. Here, this study evaluates the effectiveness of the pixel purity index and the sequential maximum angle convex cone algorithms in extracting and validating spectral signatures from pure samples of paper components (cellulose and lignin) and plastic (polypropylene). Principal-component analysis showed that both algorithms captured nearly all relevant variance for the tested materials. Spectral signatures were compared using the spectral angle mapper, revealing high similarity in the short-wave infrared region and greater variability in the visible near-infrared range. The methodology was then applied to a disposable coffee cup to detect and quantify mixed materials, accurately estimating material abundance and object area with less than 1% error. This approach enhances material classification, supporting product verification, quality control, and automated sorting for sustainable waste management and resource recovery.

36 MATERIALS SCIENCE↗

Extracting physics through deep data analysis

In recent decades humankind has become very apt at generating and recording enormous amounts of data, ranging from tweets and selfies on social networks, to financial transactions in banks and stores. The scientific community has not shunned this popular trend and now routinely produces hundreds of petabytes of data per year [1]. This is because materials and phenomena in the world around us exist in an interweaved, entangled form, which gives rise to the complexity of the Universe and determines the size and complexity of the data that describes it. Science and technology endeavor to unravel this convolution and extract pure components from the mixtures, be it in ore mining and metal smelting or separation of thermal conductivity into the electronic and phononic contributions. Decomposition of complex behavior is the key to understanding manifestations of Nature. However, tools to carry out this task are not readily available, and therefore, intricate systems often remain well-characterized experimentally, but still not well understood due to intricacy of the collected data. Lastly, in materials science, understanding and ultimately designing new materials with complex properties will require the ability to integrate and analyze data from multiple instruments, including computational models, designed to probe complementary ranges of space, time, and energy.

36 MATERIALS SCIENCE↗