Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Contribution from Ising domains overlapping out-of-plane to perpendicular magnetic anisotropy in Mn 4 N thin films on MgO(001)

Single phase ε-Mn4N thin and ultrathin films are grown on MgO(001) using molecular beam epitaxy. Reflection high-energy electron diffraction and outof-plane x-ray diffraction measurements are taken for each sample in order to determine the in- and out-of-plane strain for each sample. Vibrating sample magnetometry and superconducting quantum interference device measurements, which are performed on the thin and ultrathin films respectively, are used to plot the magnetization of each sample versus both in- and out-of-plane $\vec H$-fields and to determine the magnitude of perpendicular magnetic anisotropy in these films. Three significant components of perpendicular magnetic anisotropy are observed in these films and are attributed to sample strain (1 component) and shape (2 components). Among these components, the most significant component (0.8 to 4.9 $\frac{Merg}{cm^3}$) is identified as a second term of shape anisotropy, which possesses a negative linear relationship with sample thickness over the range from 9 nm to 310 nm. Atomic (magnetic) force microscopy measurements show the presence of a surface localized magnetic polarization (22% to 82%), which increases with decreasing thickness, when the net magnetization of the films is zero. The second term of shape anisotropy as well as the surface localized polarization, which each depend on sample thickness, are each regarded as a consequence of Ising domains overlapping out-of-plane in these films.

Materials Science↗

Coriolis analysis of several high-resolution infrared bands of bicyclo[111]pentane-d0 and -d1

High resolution infrared absorption spectra have been analyzed for two bicyclo[1.1.1]pentane isotopologues, C5H8 (-d0) and C5H7D (-d1), where in the latter the D-atom replaces a hydrogen on the C3 symmetry axis such that the molecular symmetry is reduced from D3h to C3v. Two (a2") parallel bands, ν17 and ν18, of bicyclopentane-d0 were studied and the former was found to be profoundly affected by Coriolis coupling with the nearby (e') perpendicular band, ν11. Weaker coupling was observed between the ν18 band and the nearby ν13(e') band, for which fewer transitions could be assigned. For bicyclopentane-d1, the ν5 parallel band was also studied along with the nearby ν15(e') band to which it is coupled through a similar type of Coriolis resonance. For both isotopologues, quantum calculations (B3LYP/cc-pVTZ) done at the anharmonic level were very helpful in unraveling the complexities caused by the Coriolis interactions, provided that care is taken in identifying the effect of any Coriolis resonances in the theoretical values of aB and q rovibrational parameters. The ground state B0 constants were found to be 0.2399412(2) and 0.2267506(11) cm-1 for the -d0 and -d1 isotopologues. The difference yields an Rs substitution value of 2.0309(2) Å for the position of the axial H atom relative to the -d0 center of mass, a result in good accord with a corresponding Ra value of 2.044(6) Å from electron diffraction data. For both isotopologues, the theoretical results from the quantum calculations are in good agreement with all corresponding values determined from the spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Resolution Infrared Studies of Perdeutero-Spiropentane, C 5 D 8

Perdeutero-spiropentane (C 5 D 8 ) has been synthesized and infrared and Raman spectra are reported for the first time. Wavenumber assignments are made for most of the fundamental vibrational modes. Gas phase infrared spectra were recorded at a resolution (0.002 cm -1 ) sufficient to resolve individual rovibrational lines and show evidence of strong Coriolis and/or Fermi resonance interactions for most bands. However a detailed rovibrational analysis of the fundamental v 15 (b 2 ) parallel band proved possible and a fit of more than 1600 lines yielded a band origin of 1053.84465(10) cm -1 and ground state constants (in units of cm -1 ): B 0 = 0.1120700(9), D J = 1.51(3) x10 -8 , D JK = 3.42(15) x10 -8 . We note that the B 0 value is significantly less than a value of Ba = 0.1140 cm-1 calculated using structural parameters from an earlier electron diffraction (ED) study, whereas one expects B a to be lower than B 0 because of thermal averaging over higher vibrational levels. A similar discrepancy was noted in an earlier study of C 5 H 8 [1]. The structural and spectroscopic results are in good accord with values computed at the anharmonic level using the B3LYP density functional method with a cc-pVTZ basis set.

C5H8 and C5D8↗

Structure And Radiation Damage Behavior Of Epitaxial CrxMo1-x Alloy Thin Films On MgO

Phenomena related to the interaction of point defects and dopants with grain boundaries and interfaces have been very well documented. However, a quantitative understanding of such an interaction is still missing. In this paper we explore the correlation between radiation damage and interface structure. In doing so, CrxMo1-x(001) films of thickness ~100 nm were epitaxially grown on MgO (001) using molecular beam epitaxy. The interface dislocation density can be systematically varied by controlling the composition of the film. This system allows us to probe the response of the defects generated during the irradiation to the interface dislocation density. The microstructural features of these films before and after irradiation are carefully studied using high resolution scanning/transmission electron microscopy and electron diffraction. It has been found that the film/substrate system is very resistant to ion-induced irradiation damage. No visible point defect clusters, dislocation network or amorphization has been identified, which is contrasted with other materials of either metallic or ionic bonding. We conclude that the defects in the present system appear to be either sub-microscopic and highly dispersed or are annihilated during the irradiation process. Further detailed work is needed to identify the spatial distribution of the defects.

Environmental Molecular Sciences Laboratory↗

Influence of SiC grain boundary character on fission product transport in irradiated TRISO fuel

The relationship between grain boundary character and fission product migration is identified as an important knowledge gap in order to advance the understanding of fission product release from TRISO fuel particles. Precession electron diffraction (PED), a TEM-based technique, was used in this study to quickly and efficiently provide the crystallographic information needed to identify grain boundary misorientation, grain boundary type (low or high angle) and whether the boundary is coincident site lattice (CSL) – related, in irradiated SiC. Analysis of PED data showed the grain structure of the SiC layer in an irradiated TRISO fuel particle from the AGR-1 experiment to be composed mainly of twin boundaries with a small fraction of low angle grain boundaries (<10%). In general, fission products favor precipitation on random, high angle grain boundaries but can precipitate out on low angle and CSL-related grain boundaries to a limited degree. Pd is capable of precipitating out on all types of grain boundaries but most prominently on random, high angle grain boundaries. Pd-U and Pd-Ag precipitates were found on CSL-related as well as random high angle grain boundaries but not on low angle grain boundaries. In contrast, precipitates containing only Ag were found only on random, high angle grain boundaries but not on either low angle or CSL-related grain boundaries.

36 MATERIALS SCIENCE↗

Microstructure and fission products in the UCO kernel of an AGR-1 TRISO fuel particle after post irradiation safety testing

Tristructural isotropic (TRISO) coated particle fuel as a key fuel concept for the High Temperature Gas-cooled Reactors (HTGRs) and a candidate accident tolerant fuel (ATF) has been currently investigated under the US-DOE Advanced Gas Reactor (AGR) fuel development and qualification program. Over the past decades, extensive studies have been conducted to evaluate the fission product release, diffusion on Ag, Pd and Cd in the SiC layer and the TRISO coating system, and post-safety-test performance. However, to date, there are limited reported results on the fuel kernels’ response to irradiation with or without post irradiation high temperature annealing. To incrementally fulfill this knowledge gap extensive studies using transmission electron microscopes (TEM) and atom probe tomography (APT) were conducted on a TRISO fuel particle kernel with a 19.74% 235U enrichment, irradiated to 18.63% FIMA and subsequently subjected to post-safety testing at 1600ºC for 300 hours.. Microstructure characterizations, elemental analysis, and phase identification were conducted using conventional TEM and scanning TEM (STEM) imaging, energy-dispersive X-ray spectroscopy (EDS), selected-area electron diffraction (SAED) and atom probe tomography (APT). The following findings were made: (1) significant reconstructions and phase evolutions occurred in the irradiated and post-safety annealed fuel kernel, and its microstructure consists of two primary phases, namely a “high-Z (atomic mass)” UC phase and a “low-Z” UO phase, (2) no fission gas bubbles are identified within the fuel kernel, that can be attributed to the high temperature post safety annealing, (3) fission products Zr, Nb, Mo, Ru, Tc and Rh were found to preferentially segregate into UC phase or to form metallic precipitates, while the lanthanide fission products tend to stay in the solution of UO phase, (4) Pd was detected in the rod-shaped precipitates, (5) APT data reveals segregation of Te, Pd, and Ag at the UO and UC phase boundary, and (6) Pd is detected in both the UO and UC phases but with an enrichment in the former one.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Plutonium migration and phase evolution in irradiated U-Pu-Zr metallic fuels: An integrated EPMA-SEM-TEM study

Constituent redistribution is a defining feature of irradiated U-Pu-Zr metallic fuels, yet its mechanisms and effects on fuel performance are not sufficiently resolved to guide model development. Although decades of irradiation testing have established broad trends, a true mechanistic understanding of constituent redistribution has not been achieved. Here, in this study, we use electron probe microanalysis (EPMA), scanning electron microscopy (SEM), and transmission electron microscopy-based (TEM) selective area electron diffraction (SAED) on a EBR-II irradiated U-19 wt.% Pu-6 wt.% Zr fuel pin cross-section to correlate the composition, porosity, and crystallographic phases formed after irradiation. Constituent redistribution is thought to consist of three distinct zones, in which uranium and zirconium migrate while plutonium remains relatively unchanged. Our EPMA results resolve eight distinct compositional regions, and more importantly, show that plutonium redistributes alongside zirconium, contrary to historical assumptions. The distribution of fission products was highly asymmetric with a few large lanthanide precipitates observed at isolated sites on the pin periphery instead of a uniform distribution of smaller precipitates around the periphery. Using thermodynamic data from TAF-ID and the measured EPMA compositions, matrix phase fractions were predicted across the fuel radius. Phase predictions based on composition did not match TEM/SAED results, which revealed a much higher fraction of α−U phase than would be expected if phases were retained from reactor temperatures. These findings highlight the need for expanded SAED phase identification to capture post-irradiation and storage effects, as well as rigorous uncertainty quantification in fuel performance and phase diagram modeling to better constrain predictions from compositional data.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Local composition and carrier concentration in Pb0.7Ge0.3Te and Pb0.5Ge0.5Te alloys from 125Te NMR and microscopy

Pb0.7Ge0.3Te and Pb0.5Ge0.5Te alloys, (i) quenched from 923 K or (ii) quenched and annealed at 573 K for 2 h, have been studied by 125Te NMR, X-ray diffraction, electron and optical microscopy, as well as energy dispersive spectroscopy. Depending on the composition and thermal treatment history, 125Te NMR spectra exhibit different resonance frequencies and spin-lattice relaxation times, which can be assigned to different phases in the alloy. Quenched and annealed Pb0.7Ge0.3Te alloys can be considered as solid solutions but are shown by NMR to have components with various carrier concentrations. Quenched and annealed Pb0.5Ge0.5Te alloys contain GeTe- and PbTe-based phases with different compositions and charge carrier concentrations. Based on the analysis of non-exponential 125Te NMR spin-lattice relaxation, the fractions and carrier concentrations of the various phases have been estimated. Our data show that alloying of PbTe with Ge results in the formation of chemically and electronically inhomogeneous systems. 125Te NMR can be used as an efficient probe to detect the local composition in equilibrium as well as non-equilibrium states, and to determine the local carrier concentrations in complex multiphase tellurides.

36 MATERIALS SCIENCE↗

Low Thermal Gradient Czochralski growth of large CdWO{sub 4} crystals and electronic properties of (010) cleaved surface

The crystal growth of large high-quality inclusion-free CdWO4 crystals, 110 mm in diameter and mass up to 20 kg, has been carried out by the Low Thermal Gradient Czochralski (LTG Cz) technique. The high-purity CdWO{sub 4}(010) surface has been prepared by cleavage and high structural quality of the surface has been verified by RHEED, revealing a system of Kikuchi lines. The chemical state and electronic structure of the surface have been studied using X-ray photoelectron spectroscopy (XPS) and X-ray emission spectroscopy (XES). The total and partial densities of states of the CdWO{sub 4} tungstate were calculated employing the first-principles full potential linearized augmented plane wave (FP-LAPW) method. The results indicate that the principal contributors to the valence band of CdWO{sub 4} are the Cd 4d, W 5d and O 2p states which contribute mainly at the bottom, in the central portion and at the top of the valence band, respectively, with also significant contributions of the mentioned states throughout the whole CdWO{sub 4} valence-band region. With respect to the occupation of the O 2p states, the results of the FP-LAPW calculations are confirmed by comparison on a common energy scale of the XPS valence-band spectrum and the XES band representing the energy distribution of the O 2p states in this compound. Additionally, the FP-LAPW data allow us to conclude that the CdWO{sub 4} tungstate is a non-direct semiconductor. - Highlights: • Large high-quality CdWO{sub 4} crystals, up to 115 mm in diameter and mass up to 20 kg, have been grown. • The high-purity cleaved CdWO{sub 4}(010) surface has been studied by the XPS and XES methods. • The principal contributors to the CdWO{sub 4} valence band are the Cd 4d, W 5d and O 2p states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Depth-sensing indentation of nanomaterials and nanostructures

Due to its capacity for applying ultralow loads and detecting nanometer-scale deflections, nanoindentation has been used to investigate the mechanical behavior of various material configurations at the micro- and nano-scales. The emphasis of the article is on the nanoscale deformation of nanoparticles, micro/nanopillars, microbeams, micro/nanofibers, nanocomposites, membranes and monolayer films, which are all ubiquitous structures in nanotechnology. The small volumes of these structures have led to the elucidation of material deformation mechanisms that are not the same as their bulk counterparts. Advances in instrumentation have enabled nanoindentation experiments to be conducted in situ in conjunction with scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), electrical contact resistance (ECR) measurements, atomic force microscopy (AFM), among others, and examples of these studies will be discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructural and textural evolution of AZ61 magnesium alloy sheet during bidirectional cyclic bending

In this work, the microstructural and textural evolution in the sheets of AZ61 magnesium alloy was studied by means of bidirectional cyclic bending for 8 passes at 623 K. The bended samples were examined by optical microscopy and electron backscatter diffraction analysis. The results showed that a gradient structure with fine grains about 3 μm in the regions near two surfaces and, in contrast, coarse grains in the middle of the sheet were formed. The evident grain refinement was attributed to twin-assisted dynamic recrystallization and continuous dynamic recrystallization induced by kink bands. The texture intensity was clearly reduced, resulting in a negative gradient distribution, with the texture intensity decreases from the center of the sheet to two surfaces. The weakened texture greatly facilitated the reduction of the yield strength. A higher fracture elongation and a slightly improved ultimate tensile strength were achieved concurrently. - Highlights: • The AZ61 Mg alloy is deformed at 623 K by bidirectional cyclic bending. • A symmetric gradient distribution of fine grains along the thickness is formed. • The basal texture in the regions near two surfaces is weakened significantly.

36 MATERIALS SCIENCE↗

Effect of grain orientation on mechanical properties and thermomechanical response of Sn-based solder interconnects

The thermomechanical response of Sn-based solder interconnects with differently oriented grains was investigated by electron backscattered diffraction technique under thermal cycling and thermal shock testing in this study. The results showed that deformation and cracking of solder interconnects have a close relationship with the unique characteristics of grain orientation and boundaries in each solder interconnect, and deformation was frequently confined within the high-angle grain boundaries. The micro Vickers hardness testing results showed that the hardness varied significantly depending on the grain orientation and structure, and deformation twins can be induced around the indents by the indentation testing. - Highlights: • Thermomechanical response shows a close relationship with the grain structure. • Deformation was frequently confined within the high-angle grain boundaries. • Different grain orientations exhibit different hardness. • Deformation twins can be induced around the indents in SAC105 solder interconnects.

36 MATERIALS SCIENCE↗

Characterization of microstructure, texture and magnetic properties in twin-roll casting high silicon non-oriented electrical steel

An Fe-6.5 wt.% Si-0.3 wt.% Al as-cast sheet was produced by twin-roll strip casting process, then treated with hot rolling, warm rolling and annealing. A detailed study of the microstructure and texture evolution at different processing stages was carried out by optical microscopy, X-ray diffraction and electron backscattered diffraction analysis. The initial as-cast strip showed strong columnar grains and pronounced < 001 >//ND texture. The hot rolled and warm rolled sheets were characterized by large amounts of shear bands distributed through the thickness together with strong < 110 >//RD texture and weak < 111 >//ND texture. After annealing, detrimental < 111 >//ND texture almost disappeared while beneficial (001)<210 >, (001)<010 >, (115)<5 − 10 1 > and (410) < 001 > recrystallization textures were formed, thus the magnetic induction of the annealed sheet was significantly improved. The recrystallization texture in the present study could be explained by preferred nucleation and grain growth mechanism. - Highlights: • A high silicon as-cast strip with columnar structure was produced. • A thin warm rolled sheet without large edge cracks was obtained. • Microstructure and texture evolution at each stage were investigated. • Beneficial (001)<210 >, (001)<010 >, (410)<001 > recrystallization textures were formed. • The magnetic induction of annealed sheet was significantly improved.

36 MATERIALS SCIENCE↗

An alternative to the crystallographic reconstruction of austenite in steels

An alternative crystallographic austenite reconstruction programme written in Matlab is developed by combining the best features of the existing models: the orientation relationship refinement, the local pixel-by-pixel analysis and the nuclei identification and spreading strategy. This programme can be directly applied to experimental electron backscatter diffraction mappings. Its applicability is demonstrated on both quenching and partitioning and as-quenched lath-martensite steels. - Highlights: • An alternative crystallographic austenite reconstruction program is developed. • The method combines a local analysis and a nuclei identification/spreading strategy. • The validity of the calculated orientation relationship is verified on a Q and P steel. • The accuracy of the reconstructed microtexture is investigated on a martensite steel.

36 MATERIALS SCIENCE↗

Effect of the pre-existing carbides on the grain boundary network during grain boundary engineering in a nickel based alloy

Grain boundary engineering was carried out on an aging-treated nickel based Alloy 690, which has precipitated carbides at grain boundaries. Electron backscatter diffraction technique was used to investigate the grain boundary networks. Results show that, compared with the solution-annealed samples, the aging-treated samples with pre-existing carbides at grain boundaries need longer duration or higher temperature during annealing after low-strain tensile deformation for forming high proportion of low-Σ coincidence site lattice grain boundaries (more than 75%). The reason is that the primary recrystallization is inhibited or retarded owing to that the pre-existing carbides are barriers to grain boundaries migration. - Highlights: • Study of GBE as function of pre-existing GB carbides, tensile strain and annealing • Recrystallization of GBE is inhibited or retarded by the pre-existing carbides. • Retained carbides after annealing show the original GB positions. • More than 80% of special GBs were formed after the modification of GBE processing. • Multiple twinning during recrystallization is the key process of GBE.

36 MATERIALS SCIENCE↗

Fabrication and characterization of copper oxide (CuO)–gold (Au)–titania (TiO{sub 2}) and copper oxide (CuO)–gold (Au)–indium tin oxide (ITO) nanowire heterostructures

Nanoscale heterostructures composed of standing copper oxide nanowires decorated with Au nanoparticles and shells of titania and indium tin oxide were fabricated. The fabrication process involved surfactant-free and wet-chemical nucleation of gold nanoparticles on copper oxide nanowires followed by a line-of-sight sputtering of titania or indium tin oxide. The heterostructures were characterized using high resolution electron microscopy, diffraction, and energy dispersive spectroscopy. The interfaces, morphologies, crystallinity, phases, and chemical compositions were analyzed. The process of direct nucleation of gold nanoparticles on copper oxide nanoparticles resulted in low energy interface with aligned lattice for both the components. Coatings of polycrystalline titania or amorphous indium tin oxide were deposited on standing copper oxide nanowire–gold nanoparticle heterostructures. Self-shadowing effect due to standing nanowire heterostructures was observed for line-of-sight sputter deposition of titania or indium tin oxide coatings. Finally, the heterostructures were studied using Raman spectroscopy and ultraviolet–visible spectroscopy, including band gap energy analysis. Tailing in the band gap energy at longer wavelengths (or lower energies) was observed for the nanowire heterostructures. - Highlights: • Heterostructures comprised of CuO nanowires coated with Au nanoparticles. • Au nanoparticles exhibited nearly flat and low energy interface with nanowire. • Heterostructures were further sputter-coated with oxide shell of TiO{sub 2} or ITO. • The process resulted in coating of polycrystalline TiO{sub 2} and amorphous ITO shell.

36 MATERIALS SCIENCE↗

The microstructure and mechanical behaviors of the Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy produced by laser melting deposition

The microstructure and mechanical properties of the Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy produced by laser melting deposition have been investigated. The columnar grains of the Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy due to the layer-by-layer epitaxial growth from the underlying template grains during laser melting deposition, which is roughly parallel to the deposition direction, had been found by optical microscopy; strong [101{sup ¯}2]{sub α} crystallographic texture has been confirmed by X-ray diffraction and electron backscattered diffraction. Depending on the last heating history, the microstructure of the alloy undergoes a continued change opposite to the deposition direction: martensitic α′ (transformed β); coarsened primary α laths with transformed β; coarsened primary α laths; and the fine basketweave microstructure with a few coarsened α laths or annealed martensitic α′. The average Vickers micro-hardness value of the alloy is 364 HV. The alloy parallel to the deposition direction presents lower tensile strength (925 MPa) and better elongation (18.8%), compared with 1025 MPa and 8.2% of that vertical to the deposition direction, which has been discussed using its microstructure characterization. - Highlights: • The columnar grains and strong [101{sup ¯}2]{sub α} crystallographic texture of the Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy due to the epitaxial growth from the underlying template grains • The microstructure evolution of the alloy depends on the last heating history. • The specimen parallel to the deposition direction presents lower ultimate tensile strength and higher elongation than the specimen vertical to the deposition direction.

36 MATERIALS SCIENCE↗