Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading

The current work aims at proposing an EBSD-based indicator for fatigue damage of a Fe-3Si steel. At the same time direct observation of dislocation structures is provided by electron channelling contrast imaging (ECCI). The investigation consisted in processing the EBSD data from patterns collected on specimen subjected to low cycle fatigue. It revealed two different regimes depending on the applied total strain variation which is explained by the identification of the dislocations structures and their evolution. At low strain variation, strain accommodation occurs by planar glide of dislocations uniformly distributed throughout the grains. No misorientation evolution is observed. At higher strain variation, the vein-channel structure is observed within the grain and the wall-channel structure in the vicinity of grain boundaries. The misorientation between these two dislocation structures is evaluated at about 0.7° which is detected by the EBSD analyses and explains the increase of the different misorientation based criteria. The EBSD study enables also the prediction of crack initiation mode. Finally, this study points out the limits of the EBSD technique as no misorientation evolution is detected at small strain variation. Indeed, the lattice distortion is too weak to be detected by conventional EBSD. - Highlights: • Microstructure investigation of the fatigue behaviour of an iron-silicon steel • Use of cECCI to investigate the fatigue dislocations structures • Characterisation of local plastic accommodation through EBSD misorientation criteria.

36 MATERIALS SCIENCE↗

IrGe 4 : A Predicted Weyl-Metal with a Chiral Crystal Structure

Polycrystalline IrGe4 was synthesized by annealing elements at 800 °C for 240 h, and the composition was confirmed by energy-dispersive X-ray spectroscopy. IrGe 4 adopts a chiral crystal structure (space group P3 1 21) instead of a polar crystal structure (P3 1 ), which was corroborated by the convergent-beam electron diffraction and Rietveld refinements using synchrotron powder X-ray diffraction data. The crystal structure features layers of IrGe 8 polyhedra along the b axis, and the layers are connected by edge- and corner-sharing. Each layer consists of corner-shared [Ir 3 Ge 20 ] trimers, which are formed by three IrGe 8 polyhedra connected by edge-sharing. Temperature-dependent resistivity indicates metallic behavior. The magnetoresistance increases with increasing applied magnetic field, and the nonsaturating magnetoresistance reaches 11.5% at 9 T and 10 K. The Hall resistivity suggests that holes are the majority carrier type, with a carrier concentration of 4.02 × 10 21 cm –3 at 300 K. In conclusion, electronic band structures calculated by density functional theory reveal a Weyl point with a chiral charge of +3 above the Fermi level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling the symmetry of cadmium arsenide films by epitaxial strain

Epitaxial strains offer unique opportunities to obtain topological states in thin films and heterostructures that do not exist in their bulk counterparts. Here, we investigate the point group symmetries of coherently strained films of cadmium arsenide (Cd 3 As 2 ), a prototype three-dimensional Dirac semimetal, by convergent beam electron diffraction. We report a loss of the fourfold rotational axis and adoption of the orthorhombic mmm point group in (112)-oriented films under biaxial compressive stress. (001)-oriented Cd 3 As 2 films that are under a small biaxial tensile stress retain the fourfold rotational symmetry that protects the bulk nodes but adopt the non-centrosymmetric 4mm point group symmetry. This, in turn, suggests that (001) films adopt a different crystal structure in biaxial tension, one that differs in the arrangement of the ordered Cd vacancies that are an inherent feature of the crystal structure of Cd 3 As 2 and that are key to its nodal electronic structure. Density functional theory calculations confirm the experimental findings of the stability of the non-centrosymmetric structure under biaxial tension, whereas the centrosymmetric structure is stable under biaxial compression. The results show that bulk Cd 3 As 2 is already close to structural instability and showcase the extraordinary tunability of the topological states of Cd 3 As 2 .

36 MATERIALS SCIENCE↗

Quantification of complex-phase steel microstructure by using combined EBSD and EPMA measurements

Highlights: • In CP800 steel, bainite is the dominant phase with a typical lath (width 300 nm) structure and cementite precipitates. • Martensite is dispersed as small islands and only a few narrowed martensite bands are observed which has been induced by annealing process of cold rolled sheet. • The precise carbon content is measured in bainite and martensite utilizing EPMA line scans, which is around 0.2 wt% and 0.4 wt%, respectively. • Digitalization of the microstructure for CP800 is achieved by combining EBSD and EPMA techniques. • The final constituent map consists of plenty of microstructural features including topography, crystal structures, orientations and elemental distribution. - Abstract: We combined electron backscatter diffraction (EBSD) and electron probe microanalysis (EPMA) techniques to characterize the microstructure of industrial produced complex-phase CP800 steel. First, three major constituents (ferrite, martensite and bainite) are characterized. Then, transformation-induced dislocation zones in ferrite and bainitic regions consisting of different sub-structures are quantified and segmented. A final digitalized component map including plenty of microstructural features including crystal structures, orientations and elemental distribution are successfully achieved. The precise carbon content is measured in bainite and martensite utilizing EPMA line scans, which is around 0.2 wt% and 0.4 wt%, respectively. In the bainite phase of CP800, a typical Bagaryatski orientation relationship between cementite and lath-like bainitic ferrite is revealed based on the select diffraction patterns of transmission electron microscopy measurements.

36 MATERIALS SCIENCE↗

Observation and mitigation of RF-plasma-induced damage to III-nitrides grown by molecular beam epitaxy

In this work, radio-frequency (RF) plasma-induced damage to III-nitride surfaces and bulk defects is observed and mitigated. It is shown that for InN films, the surface is more sensitive to plasma-induced damage than GaN films, as observed via atomic force microscopy and reflection high energy electron diffraction. In order to isolate any possible plasma-induced damage, a growth window for InN is established, and temperature ranges are determined for other damaging effects which include roughening due to low adatom mobility, InN decomposition, and indium desorption. In situ plasma monitoring and optimization are accomplished with a combination of optical emission spectroscopy as well as a remote Langmuir probe. It is shown that by increasing the plasma nitrogen flow, the positive ion content increases; however, the ion acceleration potential reduces. Additionally, a reduced RF plasma power results in a reduction of atomic nitrogen species. These plasma species and energetic variations result in variations in the bulk unintentional background electron concentrations observed by room temperature Hall effect measurements of ~1 um thick InN films. By increasing the nitrogen flow from 2.5 to 7.5 sccm for a constant RF power of 350 W, the background electron concentration decreases by 74% from 1.36 x 1019 cm-3 to 3.54 x 1018 cm-3, while maintaining a smooth surface morphology. Additionally, photoluminescence spectra indicate optical emission energies shift from ~0.81 to 0.71 eV (closer to the fundamental bandgap of InN) by limiting the damaging plasma species. Finally, conditions are presented to further minimize plasma-induced damage in III-nitride devices.

36 MATERIALS SCIENCE↗

Investigation of Synthetic Mg(1.3)V(1.7)O4 Spinel with MgO Inclusions: Case Study of a Spinel with an Apparently occupied Interstitial Site

A magnesium vanadate spinel crystal, ideally MgV2O4, synthesized at 1 bar, 1200 C and equilibrated under FMQ + 1.3 log f(sub o2) condition, was investigated using single-crystal X-ray diffraction, electron microprobe, and electron backscatter (EBSD). The initial X-ray structure refinements gave tetrahedral and octahedral site occupancies, along with the presence of 0.053 apfu Mg at an interstitial octahedral site . Back-scattered electron (BSE) images and electron microprobe analyses revealed the existence of an Mg-rich phase in the spinel matrix, which was too small (less than or equal to 3microns) for an accurate chemical determination. The EBSD analysis combined with X-ray energy dispersive spectroscop[y (XEDS) suggested that the Mg-rich inclusions are periclase oriented coherently with the spinel matrix. The final structure refinements were optimized by subtracting the X-ray intensity contributions (approx. 9%) of periclase reflections, which eliminated the interstitial Mg. This study provides insight into possible origins of refined interstitial cations reported in the the literature for spinel, and points to the difficulty of using only X-ray diffraction data to distinguish a spinel with interstitial cations from one with coherently oriented MgO inclusions.

Uchida, Hinako↗

Structural Complexities in Sodium Ion Conductive Antiperovskite Revealed by Cryogenic Transmission Electron Microscopy

Here we use low-dose cryogenic transmission electron microscopy (cryo-TEM) to investigate the atomic-scale structure of antiperovskite Na 2 NH 2 BH 4 crystals by preserving the room-temperature cubic phase and carefully monitoring the electron dose. Via quantitative analysis of electron beam damage using selected area electron diffraction, we find cryogenic imaging provides 6-fold improvement in beam stability for this solid electrolyte. Cryo-TEM images obtained from flat crystals revealed the presence of a new, long-range-ordered supercell with a cubic phase. The supercell exhibits doubled unit cell dimensions of 9.4 Å × 9.4 Å as compared to the cubic lattice structure revealed by X-ray crystallography of 4.7 Å × 4.7 Å. The comparison between the experimental image and simulated potential map indicates the origin of the supercell is a vacancy ordering of sodium atoms. This work demonstrates the potential of using cryo-TEM imaging to study the atomic-scale structure of air- and electron-beam-sensitive antiperovskite-type solid electrolytes.

36 MATERIALS SCIENCE↗

Mechanochemically Enabled Metastable Niobium Tungsten Oxides

Metastable compounds have greatly expanded the synthesizable compositions of solid-state materials and have attracted enormous amounts of attention in recent years. Especially, mechanochemically enabled metastable materials synthesis has been very successful in realizing cation-disordered materials with highly simple crystal structures, such as rock salts. Application of the same strategy for other structural types, especially for non-close-packed structures, is peculiarly underexplored. Niobium tungsten oxides (NbWOs), a class of materials that have been under the spotlight because of their diverse structural varieties and promising electrochemical and thermoelectric properties, are ideally suited to fill such a knowledge gap. In this work, we develop a new series of metastable NbWOs and realize one with a fully cation-disordered structure. Furthermore, we find that metastable NbWOs transform to a cation-disordered cubic structure when applied as a Li-ion battery anode, highlighting an intriguing non-close-packed–close-packed conversion process, as evidenced in various physicochemical characterizations, in terms of diffraction, electronic, and vibrational structures. Lastly, by comparing the cation-disordered NbWO with other trending cation-disordered oxides, we raise a few key structural features for cation disorder and suggest a few possible research opportunities for this field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ TEM investigations of graphic-epitaxy and small particles

Palladium was deposited inside a controlled-vacuum specimen chamber of a transmission electron microscope (TEM) onto MgO and alpha-alumina substrate surfaces. Annealing and various effects of gas exposure of the particulate Pd deposits were studied in-situ by high resolution TEM and electron diffraction. Whereas substrate temperatures of 500 C or annealing of room temperature (RT) deposits to 500 C were needed to obtain epitaxy on sapphire, RT deposits on MgO were perfectly epitaxial. For Pd/MgO a lattice expansion of 2 to 4% was noted; the highest values of expansion were found for the smallest particles. The lattice expansion of small Pd particles on alumina substrates was less than 1%. Long-time RT exposure of Pd/MgO in a vacuum yielded some moblity and coalescence events, but notably fewer than for Pd on sapphire. Exposure to air or oxygen greatly enhanced the particle mobility and coalescence and also resulted in the flattening of Pd particles on MgO substrates. Electron-beam irradiation further enhanced this effect. Exposure to air for several tens of hours of Pd/MgO led to strong coalescence.

Heinemann, K.↗

Measurement of the Dewetting, Nucleation, and Deactivation Kinetics of Carbon Nanotube Population Growth by Environmental Transmission Electron Microscopy

Understanding the collective growth of carbon nanotube (CNT) populations is key to tailoring their properties for many applications. During the initial stages of CNT growth by chemical vapor deposition, catalyst nanoparticle formation by thin-film dewetting and the subsequent CNT nucleation processes dictate the CNT diameter distribution, areal density, and alignment. Here, in this study, we use in situ environmental transmission electron microscopy (E-TEM) to observe the catalyst annealing, growth, and deactivation stages for a population of CNTs grown from a thin-film catalyst. Complementary in situ electron diffraction and TEM imaging show that, during the annealing step in hydrogen, reduction of the iron oxide catalyst is concomitant with changes in the thin-film morphology; complete dewetting and the formation of a population of nanoparticles is only achieved upon the introduction of the carbon source, acetylene. The dewetting kinetics, i.e., the appearance of distinct nanoparticles, exhibits a sigmoidal (autocatalytic) curve with 95% of all nanoparticles appearing within 6 s. After nanoparticles form, they either nucleate CNTs or remain inactive, with incubation times measured to be as small as 3.5 s. Via E-TEM we also directly observe the crowding and self-alignment of CNTs after dewetting and nucleation. In addition, in situ electron energy loss spectroscopy reveals that the collective rate of carbon accumulation decays exponentially. We conclude that the kinetics of catalyst formation and CNT nucleation must both be addressed in order to achieve uniform and high CNT density, and their transient behavior may be a primary cause of the well-known nonuniform density of CNT forests.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase Boundary Propagation in Li-Alloying Battery Electrodes Revealed by Liquid-Cell Transmission Electron Microscopy

Battery cycle life is directly influenced by the microstructural changes occurring in the electrodes during charge and discharge cycles. In this study, we image in situ the nanoscale phase evolution in negative electrode materials for Li-ion batteries using a fully enclosed liquid cell in a transmission electron microscope (TEM) to reveal early degradation that is not evident in the charge–discharge curves. To compare the electrochemical phase transformation behavior between three model materials, thin films of amorphous Si, crystalline Al, and crystalline Au were lithiated and delithiated at controlled rates while immersed in a commercial liquid electrolyte. This method allowed for the direct observation of lithiation mechanisms in nanoscale negative electrodes, revealing that a simplistic model of a surface-to-interior lithiation front is insufficient. For the crystalline films, a lithiation front spread laterally from a few initial nucleation points, with continued grain nucleation along the growing interface. The intermediate lithiated phases were identified using electron diffraction, and high-resolution postmortem imaging revealed the details of the final microstructure. Lastly, our results show that electrochemically induced solid–solid phase transformations can lead to highly concentrated stresses at the laterally propagating phase boundary which should be considered for future designs of nanostructured electrodes for Li-ion batteries.

25 ENERGY STORAGE↗

Reply to Comment on Polymorphism in the 1:1 Charge-Transfer Complex DBTTF-TCNQ and Its Effects on Optical and Electronic Properties

In the article “Polymorphism in the 1:1 Charge-Transfer Complex DBTTF-TCNQ and Its Effects on Optical and Electronic Properties”,1 we reported on two polymorphs of the charge-transfer complex dibenzotetrathiafulvalene–7,7,8,8-tetracyanoquinodimethane (DBTTF-TCNQ). The X-ray photoelectron spectroscopy (XPS) measurements performed on each crystal type confirmed the donor:acceptor (D:A) stoichiometry for the previously known α-polymorph and identified it as the same (1:1) for the newly discovered β-polymorph. Selected area electron diffraction confirmed the uniqueness of the crystal structure of each polymorph, though the thin nature of the β-crystals precluded the complete determination of the crystal structure. Nonetheless, a combination of spectroscopic methods, including optical absorption, XPS, infrared (IR) spectroscopy, and density functional theory (DFT) allowed us to propose a crystal structure for the β-polymorph. The structural differences between the two polymorphs manifested themselves in a differing value of the degree of charge transfer between the donor and acceptor species, ρ, as determined via shifts in the agυ4 mode measured using Raman spectroscopy,2 and differing electrical properties. Additionally, when the crystals were used to fabricate field-effect transistors, the α-polymorph was found to be ambipolar with higher electron mobility than a hole mobility, while the β-polymorph was also found to be ambipolar, but with a higher hole mobility than electron mobility.

36 MATERIALS SCIENCE↗

The nature of photoinduced phase transition and metastable states in vanadium dioxide

Photoinduced threshold switching processes that lead to bistability and the formation of metastable phases in photoinduced phase transition of VO 2 are elucidated through ultrafast electron diffraction and diffusive scattering techniques with varying excitation wavelengths. We uncover two distinct regimes of the dynamical phase change: a nearly instantaneous crossover into an intermediate state and its decay led by lattice instabilities over 10 ps timescales. The structure of this intermediate state is identified to be monoclinic, but more akin to M 2 rather than M1 based on structure refinements. The extinction of all major monoclinic features within just a few picoseconds at the above-threshold-level (~20%) photoexcitations and the distinct dynamics in diffusive scattering that represents medium-range atomic fluctuations at two photon wavelengths strongly suggest a density-driven and nonthermal pathway for the initial process of the photoinduced phase transition. These results highlight the critical roles of electron correlations and lattice instabilities in driving and controlling phase transformations far from equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental tests of stereological estimates of grain boundary populations

We present experimental validation of a method for estimating three-dimensional (3-D) relative numerical populations of grain boundaries from measurements of individual two-dimensional (2-D) cross-sections. Such numerical populations are relevant to network topology and the modeling of intergranular failure modes in grain boundary engineered materials, and are distinct from geometrical population measures such as area per volume. We examine 3-D reconstructions of stainless steel and copper, with varying populations of twin-related boundaries, generated by serial-section electron backscatter diffraction and high-energy X-ray diffraction microscopy. We show that 2-D length fractions, 2-D number fractions and 3-D number fractions are all distinct quantities when grain boundary type is correlated with grain boundary size. We also demonstrate that the last quantity may be reliably inferred from the first two, provided the experimental spatial resolution is much finer than the grain size, eliminating the need to use 3-D experimental methods to access at least some information about 3-D network properties. Many of the {Sigma}3 boundaries are extremely complex, with highly re-entrant shapes that can intersect a sample plane many times, giving a false impression of multiple separate boundaries.

36 MATERIALS SCIENCE↗

Structural phase diagram for ultra-thin epitaxial Fe 3 O 4 / MgO(0 01) films: thickness and oxygen pressure dependence

A systematic investigation of the thickness and oxygen pressure dependence for the structural properties of ultra-thin epitaxial magnetite (Fe 3 O 4 ) films has been carried out; for such films, the structural properties generally differ from those for the bulk when the thickness ≤10 nm. Iron oxide ultra-thin films with thicknesses varying from 3 nm to 20 nm were grown on MgO (001) substrates using molecular beam epitaxy under different oxygen pressures ranging from 1 × 10 -7 torr to 1 × 10 -5 torr. The crystallographic and electronic structures of the films were characterized using low energy electron diffraction (LEED) and x-ray photoemission spectroscopy (XPS), respectively. Moreover, the quality of the epitaxial Fe 3 O 4 ultra-thin films was judged by magnetic measurements of the Verwey transition, along with complementary XPS spectra. We observed that under the same growth conditions the stoichiometry of ultra-thin films under 10 nm transforms from the Fe 3 O 4 phase to the FeO phase. In this work, a phase diagram based on thickness and oxygen pressure has been constructed to explain the structural phase transformation. It was found that high-quality magnetite films with thicknesses ≤20 nm formed within a narrow range of oxygen pressure. An optimal and controlled growth process is a crucial requirement for the accurate study of the magnetic and electronic properties for ultra-thin Fe 3 O 4 films. Furthermore, these results are significant because they may indicate a general trend in the growth of other oxide films, which has not been previously observed or considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quasiperiodic potassium adlayer on decagonal Al–Ni–Co quasicrystal

Quasiperiodicity in free-electron-like metals is a subject of significant interest within the scientific community. In this work, utilizing scanning tunneling microscopy (STM), low energy electron diffraction (LEED), and density functional theory (DFT), we demonstrate the formation of a quasiperiodic potassium monolayer on the tenfold surface of decagonal Al–Ni–Co quasicrystal. A dispersed growth comprising of isolated K adatoms is observed at sub-monolayer coverage, which coalesce with increasing coverage and forms pentagonal and decagonal quasiperiodic motifs. LEED demonstrates distinct rings of spots displaying decagonal symmetry. Furthermore, our DFT calculation using the W-approximant surface that closely resembles d-Al–Ni–Co shows that sizable adsorbate-substrate interaction makes the potassium adatoms bind to the quasiperiodically dispersed favorable adsorption sites resulting in the formation of quasiperiodic potassium monolayer. Notably, the experimental motifs obtained from STM measurements align remarkably well with the DFT predictions, underscoring the intricate relationship between the electronic structure of the substrate that drives the quasiperiodic growth of the potassium adlayer.

alkali metal↗

Unraveling the adsorption-limited hydrogen oxidation reaction at palladium surface via in situ electron microscopy

Palladium (Pd) catalysts have been extensively studied for the direct synthesis of H 2 O through the hydrogen oxidation reaction at ambient conditions. This heterogeneous catalytic reaction not only holds considerable practical significance but also serves as a classical model for investigating fundamental mechanisms, including adsorption and reactions between adsorbates. Nonetheless, the governing mechanisms and kinetics of its intermediate reaction stages under varying gas conditions remain elusive. This is attributed to the intricate interplay between adsorption, atomic diffusion, and concurrent phase transformation of catalyst. Herein, the Pd-catalyzed, water-forming hydrogen oxidation is studied in situ, to investigate intermediate reaction stages via gas cell transmission electron microscopy. The dynamic behaviors of water generation, associated with reversible palladium hydride formation, are captured in real time with a nanoscale spatial resolution. Our findings suggest that the hydrogen oxidation rate catalyzed by Pd is significantly affected by the sequence in which gases are introduced. Through direct evidence of electron diffraction and density functional theory calculation, we demonstrate that the hydrogen oxidation rate is limited by precursors’ adsorption. These nanoscale insights help identify the optimal reaction conditions for Pd-catalyzed hydrogen oxidation, which has substantial implications for water production technologies. The developed understanding also advocates a broader exploration of analogous mechanisms in other metal-catalyzed reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗