Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Earth Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Better Constraining Supercooled Clouds Could Reduce Projected Warming Spread

The increase of climate sensitivity to rising greenhouse gas concentrations in the coupled model intercomparison project phase 6 (CMIP6) Earth system models (ESMs) compared to CMIP5 ESMs is primarily attributed to a larger extratropical cloud response to climate change, referred to as cloud feedback. The ratio of supercooled liquid cloud water relative to all cloud water, termed liquid phase ratio (LPR), which has also notably increased in many recent ESMs, is thought to be a primary driver of the extratropical cloud feedback increase. Unlike the preponderance of previous studies that compare native model LPR directly with observations, here we evaluate LPR over three ESM generations against Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) using an instrument simulator approach, which mimics instrument limitations and uses consistent cloud definitions and resolutions. We find that current coupled model intercomparison project (CMIP) ESMs collectively simulate greater LPR than previous CMIP generations and overestimate LPR compared to observations, contrary to previous findings, likely driven by past inconsistent comparisons of ESM outputs with CALIPSO observations. We further show that greater LPR in ESM present-day climate is unexpectedly correlated with a smaller extratropical cloud feedback, attributable to a decrease of cloud amount exceeding the increase of cloud optical depth. Finally, our results suggest that improving constraints on model LPR using our evaluation framework would likely reduce the spread in CMIP6 climate sensitivities, owing to its effect on extratropical cloud feedback from supercooled clouds.

greenhouse gas concentrations↗

Continental United States may lose 1.8 petagrams of soil organic carbon under climate change by 2100

Abstract Aims High‐resolution information on soils’ vulnerability to climate‐induced soil organic carbon (SOC) loss can enable environmental scientists, land managers, and policy makers to develop targeted mitigation strategies. This study aims to estimate baseline and decadal changes in continental US surface SOC stocks under future emission scenarios. Location Continental United States. Time period 2014–2100. Methods We used recent SOC field observations ( n = 6,213 sites), environmental factors ( n = 32), and an ensemble machine learning (ML) approach to estimate baseline SOC stocks in surface soils across the continental United States at 100‐m spatial resolution, and decadal changes under the projected climate scenarios of Coupled Model Intercomparison Project Phase Six (CMIP6) earth system models (ESMs). Results Baseline SOC projections from ML approaches captured more than 50% of variability in SOC observations, whereas ESMs represented only 6–16% of observed SOC variability. ML estimates showed a mean total loss of 1.8 Pg C from US surface soils under the high‐emission scenario by 2100, whereas ESMs showed no significant change in SOC stocks with wide variation among ESMs. Both ML and ESM predictions agree on the direction of SOC change (net emissions or sequestration) across 46–51% of continental US land area. These differences are attributable to the high‐resolution site‐specific data used in the ML models compared to the relatively coarse grid represented in CMIP6 ESMs. Main conclusions Our high‐resolution estimates of baseline SOC stocks, identification of key environmental controllers, and projection of SOC changes from US land cover types under future climate scenarios suggest the need for high‐resolution simulations of SOC in ESMs to represent the heterogeneity of SOC. We found that the SOC change is sensitive to key soil related factors (e.g. soil drainage and soil order) that have not been historically considered as input parameters in ESMs, because currently more than 95% variability in the SOC of CMIP6 ESMs is controlled by net primary productivity, temperature, and precipitation. Using additional environmental factors to estimate the baseline SOC stocks and predict the future trajectory of SOC change can provide more accurate results.

54 ENVIRONMENTAL SCIENCES↗

Sensitivity of Simulated Polar Climate to Improved Partitioning of Spectral Solar Irradiance Between Visible and Near‐Infrared Bands

The solar radiative processes that contribute to Earth's surface and atmospheric energy budgets are strongly dependent on wavelength. For example, snow and water vapor become more absorptive as incident radiation shifts from visible (VIS) to near-infrared (NIR) wavelengths. Some earth system models (ESMs) aggregate solar radiation into just two bands (VIS and NIR) partitioned at 0.7 μm for transmission between the atmospheric and surface components. In the widely used radiative transfer model RRTMG_SW this partition is near the center of the overlap spectral band spanning 0.625–0.778 μm, whose flux is often approximated as being evenly divided between the VIS and NIR surface bands. Using a hyperspectral radiative transfer model, we show that the fractional downwelling surface flux within the overlap band is usually distributed about 55.5%:44.5% VIS:NIR. This improved approximation shifts as much as 4.27 W m −2 from the NIR to the VIS band, leading to an instantaneous decrease in surface absorption of up to 0.91 W m −2 over snow-covered surfaces. Century-long fully coupled ESM simulations show surface absorption over snow decreases by over 1.6 W m −2 . The coupled response in sea ice regions amplifies the initial forcing ten-fold, and increases seasonal sea ice area by up to 4.9%. These results highlight the importance of accurately representing the spectral distribution of solar radiation in the cryosphere.

54 ENVIRONMENTAL SCIENCES↗

Global Carbon Cycle and Climate Feedbacks in the NASA GISS ModelE2.1

We present results from the NASA GISS ModelE2.1‐G‐CC Earth System Model with coupled climate‐carbon cycle simulations that were submitted to the sixth phase of the Coupled Model Intercomparison Project (CMIP6) Coupled Climate‐Carbon Cycle MIP (C4MIP). Atmospheric CO2 concentration and carbon budgets for the land and ocean in the historical simulations were generally consistent with observations. Low simulated atmospheric CO2 concentrations during 1850‐1950 were due to excess uptake from prescribed land cover change, which erroneously replaced arid shrublands with higher biomass crops, and assumed high 2004 LAI values in vegetated lands throughout the historical simulation. At the end of the historical period, slightly higher simulated CO2 than observed resulted from the land being an insufficient net carbon sink, despite the net effect of CO2 fertilization and warming‐induced increases to leaf photosynthetic capacity. The global ocean carbon uptake agreed well with the observations with the largest discrepancies in the low latitudes. Future climate projection at 2091‐2100 agreed with CMIP5 models in the northward shift, of temperate deciduous forest climate and expansion across Eurasia along 60 °N latitude, and dramatic regional biome shifts from drying and warming in continental Europe. Carbon feedback parameters were largely similar to the CMIP5 model ensemble. For our model, the variation of land feedback parameters within the uncertainty arises from the fertilization feedback being less sensitive due to lack of increased vegetation growth, and the comparably more negative ocean carbon‐climate feedback is due to the large slowdown of the Atlantic overturning circulation.

Carbon cycle↗

Intensification of future subsurface marine heatwaves in an eddy-resolving model

A shift in depth range enables marine organisms to adapt to marine heatwaves (MHWs). Subsurface MHWs could limit this pathway, yet their response to climate warming remains unclear. Here, using an eddy-resolving Earth system model forced under a high emission scenario, we project a robust global increase in subsurface MHWs driven by rising subsurface mean temperatures and enhanced temperature variability. Historically, maximum MHW intensity occurs around 100m depth, which shifts to the faster-warming surface under greenhouse warming. However, removing the long-term warming trend yields an increase in subsurface MHW intensity and annual days greater than that at the surface, especially in large marine ecosystem regions, primarily due to increased variability. Additionally, days of the surface and subsurface concurrent event increase ten times more than those of individual events. Our study highlights a heightened threat to marine organisms under global warming, as the increased subsurface heatwaves reduce their refuge options.

54 ENVIRONMENTAL SCIENCES↗

Coupling of Dust Mineralogy to Radiation in NASA GISS ModelE: Impact Upon Dust Optical Properties and Direct Radiative Effect

Estimates of dust direct radiative effect (DRE) are still largely uncertain mainly due to the poor constraining of regional variations of dust absorption, whose known connection with mineral composition is still largely neglected by most Earth System Models. The inaccurate knowledge of soil mineralogy and insufficient measurements of dust physical and optical properties still present the main challenges for a proper representation of the dust-radiation interaction in climate models. We recently upgraded the coupling of dust minerals to shortwave radiation in the NASA GISS ModelE. In particular, we extended the interaction to online-calculated minerals and implemented two different mixing configurations: i) external mixing of three main mineral components and ii) internal mixing of all minerals, allowing a dynamic fraction of iron oxides. We used a semi-empirical approach for the optical calculations, mostly based on aerosol chamber measurements from natural soils, aiming to reduce the influence of uncertain assumptions on the optical properties and mixing state of individual minerals. In this contribution, we present the results of our first calculations of dust optical properties and DREs based on different mixing configurations of interactive minerals. We show the changes to dust optical depth and single scattering albedo, with respect to the control case using homogeneous dust composition, and the consequent global and regional variations in dust DREs at the top of atmosphere and at surface. We also compare the model optical properties with AERONET data, filtered to identify dust scenes. We find that accounting for the diverse properties of dust minerals modifies the pattern of regional dust absorption and therefore its impact upon climate. We also show that the mineralogy effect is sensitive to the assumed mixing state of minerals.

dust direct radiative effect↗

Global net climate effects of anthropogenic reactive nitrogen

Anthropogenic activities have substantially enhanced the loadings of reactive nitrogen (Nr) in the Earth system since pre-industrial times, contributing to widespread eutrophication and air pollution. Increased Nr can also influence global climate through a variety of effects on atmospheric and land processes but the cumulative net climate effect is yet to be unravelled. Here we show that anthropogenic Nr causes a net negative direct radiative forcing of –0.34 [–0.20, –0.50] W m –2 in the year 2019 relative to the year 1850. This net cooling effect is the result of increased aerosol loading, reduced methane lifetime and increased terrestrial carbon sequestration associated with increases in anthropogenic Nr, which are not offset by the warming effects of enhanced atmospheric nitrous oxide and ozone. Future predictions using three representative scenarios show that this cooling effect may be weakened primarily as a result of reduced aerosol loading and increased lifetime of methane, whereas in particular N 2 O-induced warming will probably continue to increase under all scenarios. Our results indicate that future reductions in anthropogenic Nr to achieve environmental protection goals need to be accompanied by enhanced efforts to reduce anthropogenic greenhouse gas emissions to achieve climate change mitigation in line with the Paris Agreement.

54 ENVIRONMENTAL SCIENCES↗

Significant Rural Contributions to Severe Coastal Urban Flooding Through Flow Connectivity

Coastal cities are increasingly threatened by hurricane-induced compound flooding. However, the relative contributions of rainfall-surge interactions and other flood drivers, such as runoff from surrounding rural and local impervious areas, in shaping urban flooding remain unclear. Here, we use a multi-scale Earth system modeling framework to disentangle the contributions of diverse flooding drivers. The results show that urban flooding is primarily affected by topographic factors (low elevation, flat slopes, and localized flow constrictions), rather than increased runoff from their impervious surfaces. Importantly, runoff from rural areas contributes more to severely flooded urban areas with inundation depth exceeding 1.7 m than local runoff. Although rainfall–surge interactions and sea-level rise exacerbate inundation along the coastline, over 90% of the compounding effects are absorbed by wetlands. By resolving flooding processes across scales and components, this study emphasizes the role of runoff from surrounding rural areas in shaping zones of severe urban flooding.

58 GEOSCIENCES↗

Improved Understanding of Multicentury Greenland Ice Sheet Response to Strong Warming in the Coupled CESM2‐CISM2 With Regional Grid Refinement

The simulation of ice sheet‐climate interactions, such as surface mass balance fluxes, is sensitive to model grid resolution. Here we simulate the multi‐century evolution of the Greenland Ice Sheet (GrIS) and its interaction with the climate using the Community Earth System Model version 2.2 (CESM2.2) including an interactive GrIS component (the Community Ice Sheet Model v2.1 [CISM2.1]) under an idealized warming scenario (atmospheric CO 2 increases by 1% yr -1 until quadrupling the pre‐industrial level and then is held fixed). A variable‐resolution (VR) grid with 1/4° regional refinement over the broader Arctic and 1° resolution elsewhere is applied to the atmosphere and land components, and the results are compared with conventional 1° lat‐lon grid simulations to investigate the impact of grid refinement. Compared with the 1° runs, the VR run features a slower rate of surface melt, especially over the western and northern GrIS, where the ice surface slopes gently toward the periphery. This difference pattern originates primarily from higher snow albedo and, thus, weaker albedo feedback in the VR run. The VR grid better captures the CISM ice sheet topography by reducing elevation discrepancies between CAM and CISM and is, therefore, less reliant on the downscaling algorithm, which is known to underestimate albedo gradients. The sea level rise contribution from the GrIS in the VR run is 53 mm by year 150 and 831 mm by year 350, approximately 40% and 20% less than that of the 1° runs, respectively.

Earth System Model↗

LGM Paleoclimate Constraints Inform Cloud Parameterizations and Equilibrium Climate Sensitivity in CESM2

The Community Earth System Model version 2 (CESM2) simulates a high equilibrium climate sensitivity (ECS > 5°C) and a Last Glacial Maximum (LGM) that is substantially colder than proxy temperatures. In this study, we examine the role of cloud parameterizations in simulating the LGM cooling in CESM2. Through substituting different versions of cloud schemes in the atmosphere model, we attribute the excessive LGM cooling to the new CESM2 schemes of cloud microphysics and ice nucleation. Further exploration suggests that removing an inappropriate limiter on cloud ice number (NoNimax) and decreasing the time-step size (substepping) in cloud microphysics largely eliminate the excessive LGM cooling. NoNimax produces a more physically consistent treatment of mixed-phase clouds, which leads to an increase in cloud ice content and a weaker shortwave cloud feedback over mid-to-high latitudes and the Southern Hemisphere subtropics. Microphysical substepping further weakens the shortwave cloud feedback. Based on NoNimax and microphysical substepping, we have developed a paleoclimate-calibrated CESM2 (PaleoCalibr), which simulates well the observed twentieth century warming and spatial characteristics of key cloud and climate variables. PaleoCalibr has a lower ECS (∼4°C) and a 20% weaker aerosol-cloud interaction than CESM2. PaleoCalibr represents a physically more consistent treatment of cloud microphysics than CESM2 and is a valuable tool in climate change studies, especially when a large climate forcing is involved. Our study highlights the unique value of paleoclimate constraints in informing the cloud parameterizations and ultimately the future climate projection.

equilibrium climate sensitivity↗

Climate model projections from the Scenario Model Intercomparison Project (ScenarioMIP) of CMIP6

The Scenario Model Intercomparison Project (ScenarioMIP) defines and coordinates the main set of future climate projections, based on concentration-driven simulations, within the Coupled Model Intercomparison Project phase 6 (CMIP6). This paper presents a range of its outcomes by synthesizing results from the participating global coupled Earth system models. We limit our scope to the analysis of strictly geophysical outcomes: mainly global averages and spatial patterns of change for surface air temperature and precipitation. We also compare CMIP6 projections to CMIP5 results, especially for those scenarios that were designed to provide continuity across the CMIP phases, at the same time highlighting important differences in forcing composition, as well as in results. The range of future temperature and precipitation changes by the end of the century (2081–2100) encompassing the Tier 1 experiments based on the Shared Socioeconomic Pathway (SSP) scenarios (SSP1-2.6, SSP2-4.5, SSP3-7.0 and SSP5-8.5) and SSP1-1.9 spans a larger range of outcomes compared to CMIP5, due to higher warming (by close to 1.5 °C) reached at the upper end of the 5 %–95 % envelope of the highest scenario (SSP5-8.5). This is due to both the wider range of radiative forcing that the new scenarios cover and the higher climate sensitivities in some of the new models compared to their CMIP5 predecessors. Spatial patterns of change for temperature and precipitation averaged over models and scenarios have familiar features, and an analysis of their variations confirms model structural differences to be the dominant source of uncertainty. Models also differ with respect to the size and evolution of internal variability as measured by individual models' initial condition ensemble spreads, according to a set of initial condition ensemble simulations available under SSP3-7.0. These experiments suggest a tendency for internal variability to decrease along the course of the century in this scenario, a result that will benefit from further analysis over a larger set of models. Benefits of mitigation, all else being equal in terms of societal drivers, appear clearly when comparing scenarios developed under the same SSP but to which different degrees of mitigation have been applied. It is also found that a mild overshoot in temperature of a few decades around mid-century, as represented in SSP5-3.4OS, does not affect the end outcome of temperature and precipitation changes by 2100, which return to the same levels as those reached by the gradually increasing SSP4-3.4 (not erasing the possibility, however, that other aspects of the system may not be as easily reversible). Central estimates of the time at which the ensemble means of the different scenarios reach a given warming level might be biased by the inclusion of models that have shown faster warming in the historical period than the observed. Those estimates show all scenarios reaching 1.5 °C of warming compared to the 1850–1900 baseline in the second half of the current decade, with the time span between slow and fast warming covering between 20 and 27 years from present. The warming level of 2 °C of warming is reached as early as 2039 by the ensemble mean under SSP5-8.5 but as late as the mid-2060s under SSP1-2.6. The highest warming level considered (5 °C) is reached by the ensemble mean only under SSP5-8.5 and not until the mid-2090s.d-2090s.

Scenario Model Intercomparison Project (ScenarioMI↗

Arctic Warming in Response to Regional Aerosol Emissions Reductions

This study examines the Arctic surface air temperature response to regional aerosol emissions reductions using three fully coupled chemistry–climate models: National Center for Atmospheric Research-Community Earth System Model version 1, Geophysical Fluid Dynamics Laboratory-Coupled Climate Model version 3 (GFDL-CM3) and Goddard Institute for Space Studies-ModelE version 2. Each of these models was used to perform a series of aerosol perturbation experiments, in which emissions of different aerosol types (sulfate, black carbon (BC), and organic carbon) in different northern mid-latitude source regions, and of biomass burning aerosol over South America and Africa, were substantially reduced or eliminated. We find that the Arctic warms in nearly every experiment, the only exceptions being the U.S. and Europe BC experiments in GFDL-CM3 in which there is a weak and insignificant cooling. The Arctic warming is generally larger than the global mean warming (i.e. Arctic amplification occurs), particularly during non-summer months. The models agree that changes in the poleward atmospheric moisture transport are the most important factor explaining the spread in Arctic warming across experiments: the largest warming tends to coincide with the largest increases in moisture transport into the Arctic. In contrast, there is an inconsistent relationship (correlation) across experiments between the local radiative forcing over the Arctic and the simulated Arctic warming, with this relationship being positive in one model (GFDL-CM3) and negative in the other two. Our results thus highlight the prominent role of poleward energy transport in driving Arctic warming and amplification, and suggest that the relative importance of poleward energy transport and local forcing/feedbacks is likely to be model dependent.

Arctic↗

Less Atmospheric Radiative Heating By Dust Due to the Synergy of Coarser Size and Aspherical Shape

Mineral dust aerosols cool and warm the atmosphere by scattering and absorbing solar (shortwave: SW) and thermal (longwave: LW) radiation. However, significant uncertainties remain in dust radiative effects, largely due to differences in the dust size distribution and spectral optical properties simulated in Earth system models. Dust models typically underestimate the coarse dust load (more than 2.5 µm in diameter) and assume a spherical shape, which leads to an overestimate of the fine dust load (less than 2.5 µm) after the dust emissions in the models are scaled to match observed dust aerosol optical depth at 550 nm (DAOD550). Here, we improve the simulated dust properties with data sets that leverage measurements of size-resolved dust concentration, asphericity factor, and refractive index in a coupled global chemical transport model with a radiative transfer module. After the adjustment of size-resolved dust concentration and spectral optical properties, the global and annual average of DAOD550 from the simulation increases from 0.023 to 0.029 and falls within the range of a semi-observationally based estimate (0.030 ± 0.005). The reduction of fine dust load after the adjustment leads to a reduction of the SW cooling at the top of the atmosphere (TOA). To improve agreement against a semi-observationally based estimate of the radiative effect efficiency at TOA, we find that a less absorptive SW dust refractive index is required for coarser aspherical dust. Thus, only a minor difference is estimated for the net global dust radiative effect at TOA (−0.08 vs. −0.00 W m−2 on a global scale). Conversely, our sensitivity simulations reveal that the surface warming is substantially enhanced near the strong dust source regions (less cooling to −0.23 from −0.60 W m−2 on a global scale). Thus, less atmospheric radiative heating is estimated near the major source regions (less heating to 0.15 from 0.59 W m−2 on a global scale), because of enhanced LW warming at the surface by the synergy of coarser size and aspherical shape.

simulated dust properties↗

CMIP6 Historical Simulations (1850‐2014) with GISS‐E2.1

Simulations of the CMIP6 historical period 1850‐‐2014, characterized by the emergence of anthropogenic climate drivers like greenhouse gases, are presented for different configurations of the NASA Goddard Institute for Space Studies (GISS) Earth System ModelE2.1. The GISS‐E2.1 ensembles are more sensitive to forcing than their CMIP5 predecessors (GISS‐E2), but warm less during recent decades due to reduced total forcing. This forcing reduction is attributed to an increase in longwave opacity in pre‐industrial simulations, resulting in an atmosphere less sensitive to further increases in opacity that result from rising greenhouse gas concentrations. This demonstrates the importance of the base climatology to forcing and forced climate trends. Most model versions match observed temperature trends since 1979 from the ocean to the stratosphere. The choice of ocean model is important to the transient climate response, as found in CMIP5 GISS‐E2: the model that more efficiently exports heat to the deep ocean shows a smaller rise in tropospheric temperature. Model sea level rise over the historical period is traced to excessive drawdown of aquifers to meet irrigation demand with a smaller contribution from thermal expansion. This shows how fully coupled models can provide indirect observational constraints upon forcing, in this case, constraining irrigation rates with observed sea level changes. The overall agreement of GISS‐E2.1 with observed trends is familiar from evaluation of its predecessors, as is the conclusion that these trends are almost entirely anthropogenic in origin.

NASA Goddard Institute for Space Studies (GISS) Ea↗

Size-resolved process understanding of stratospheric sulfate aerosol following the Pinatubo eruption

Stratospheric sulfate aerosol produced by volcanic eruptions plays important roles in atmospheric chemistry and the global radiative balance of the atmosphere. The simulation of stratospheric sulfate concentrations and optical properties is highly dependent on the chemistry scheme and microphysical treatment. In this work, we implemented a sophisticated gas-phase chemistry scheme (full chemistry, FC) and a 5-mode version of the Modal Aerosol Module with Prognostic Stratospheric Aerosol (MAM5-PSA) for the interactive treatment of stratospheric sulfate aerosol in the Department of Energy's Energy Exascale Earth System Model version 2 (E3SMv2) model to better simulate the chemistry-aerosol feedback following the Pinatubo eruption, and to compare it against a simulation using simplified chemistry (SC) and the default 4-mode version of the Modal Aerosol Module (MAM4). MAM5-PSA experiments were found to better capture the stratospheric sulfate burden from the eruption of the volcano to the end of 1992 as compared to the High-resolution Infrared Sounder (HIRS) observations, and the formation of sulfate in MAM5-PSA with FC (with an additional OH replenishment reaction) was significantly faster than in MAM4 with FC. Analyses of microphysical processes indicate that more sulfate aerosol mass was generated in total in FC experiments than in SC experiments. MAM5-PSA performs better than MAM4 in simulation of aerosol optical depth (AOD); AOD anomalies from the MAM5-PSA experiment have better agreement with observations. The simulated largest changes in global mean net radiative flux at the top of the atmosphere following the eruption were about −3 W m −2 in MAM5-PSA experiments and roughly −1.5 W m −2 in MAM4 experiments.

AEROSOL↗

A Comparative Study of Physics‐Informed and Data‐Driven Neural Networks for Compound Flood Simulation at River‐Ocean Interfaces: A Case Study of Hurricane Irene

Simulating compound flooding (CF) at the river-ocean interface within large-scale Earth System Models (ESMs) presents significant challenges due to complex interactions between river discharge, storm surge, and tides. This study assesses the comparative advantages of physics-informed and data-driven machine learning (ML) approaches for enhancing local ESM performance. We systematically compare data-driven neural network models (i.e., CNNs, U-Net, Long Short-Term Memory (LSTM), Gated Recurrent Unit), and physics-informed neural network (PINN) models, including vanilla PINN and a finite-difference-based PINN (FD-PINN). Specifically, FD-PINN is introduced to enhance computational efficiency, accelerating vanilla PINNs by ∼6.5 times while improving accuracy. To enhance data-driven model training, a new data-generation approach is developed to sample historical fluvial and coastal flood events, which ensures a robust data set for extreme event prediction. The models are evaluated using a realistic one-dimensional river domain extracted from an ESM's river mesh and the Hurricane Irene event as an independent test case. Results show that FD-PINN achieves accurate predictions with significantly reduced computational costs relative to vanilla PINNs. Among data-driven models, the best overall performance is achieved by a CNN-LSTM hybrid, which balances accuracy and efficiency. While a fully connected CNN (CNN-FC) provides the best accuracy, it incurs high computational cost. Architectures lacking strong temporal modeling tend to underperform on unseen events. These findings highlight the importance of sequence-aware designs for robust generalization. This study reveals the trade-offs between physics-informed and data-driven models and proposes an adaptive hybrid framework for integrating ML into ESMs to enhance local flood simulations.

Earth Systems Modeling↗

Role of Forest Carbon Change in Shaping Future Land Use and Land Cover Change

Global change, particularly the changes in atmospheric CO 2 concentration, climatic variables, and nitrogen deposition, has been widely recognized and examined to have worldwide impacts on forest carbon. However, its influence on forest area required to meet the demand for timber and carbon storage and subsequent land use and land cover change (LULCC) is rarely studied. This study explores the role of global change-driven forest carbon change in shaping future global LULCC projections and investigates underlying drivers. We incorporated the global change impacts on forest carbon from the Canadian Land Surface Scheme Including Biogeochemical Cycles model simulations (driven by meteorological forcing projections from two Earth system models [ESMs]) into the Global Change Analysis Model, under three combinations of shared socioeconomic pathways and representative concentration pathways (SSP126, SSP370, and SSP585). Including forest carbon change decreases the projected expansion of managed forest and managed pasture, reduces the loss of unmanaged pastures and forests, and provides more cropland. The relative change in managed forest by 2100 is -4.0%, -21.7%, and -31.9%, under SSP126, SSP370, and SSP585, respectively, when forest carbon change is considered. CO 2 fertilization is the dominant driver, increasing forest vegetation and soil carbon by 37% and 4.1%, and leading to 78.6% of the total area with a change in land use types by 2100 under SSP585. In comparison, climate change reduces forest vegetation and soil carbon by -3.5% and -0.8%, influencing 23.9% of the total area with a change in land use types by 2100 under SSP585, while nitrogen deposition has minor impacts. Using meteorological forcing data from two ESMs leads to similar impacts of forest carbon change on LULCC in terms of sign and trend but different magnitudes. This study highlights the large impact of forest carbon change on shaping future LULCC dynamics and the critical role of CO 2 fertilization.

54 ENVIRONMENTAL SCIENCES↗

The Freundlich isotherm equation best represents phosphate sorption across soil orders and land use types in tropical soils of Puerto Rico

Biomass production in the lowland wet tropical forest is greater than in any other biome, and it is typically limited by soil phosphorus (P) availability. However, the mechanisms involved in the P cycle remain poorly represented in Earth System Models (ESMs). Soil P sorption processes are key in the P cycle and for understanding the extent of P limitation for plant productivity. Currently, a few ESMs include isotherm equations to model these processes. Although the Langmuir equation is widely cited, other isotherm equations may better describe sorption in tropical soils. Here, we use a diverse range of soil samples from Puerto Rico to test the validity of the Langmuir, Freundlich, and Temkin equation. We found that across four soil orders (Inceptisols, Mollisols, Oxisols, Ultisols), and forested and cultivated land use types, the Freundlich equation best represented soil P sorption. Furthermore, the Langmuir and the Temkin equations poorly represent soil P adsorption, especially at low P concentrations. Specifically, the Langmuir equation underestimated soil P adsorption by 40% and the Temkin equation overestimated adsorption by 76%. We also found, as expected, that soil clay content and pH were the most important parameters explaining the variability of the Freundlich (K f ) constant. Greater clay content and lower pH, common in highly weathered Ultisols and Oxisols which are abundant in the tropics, led to greater K f values. Overall, our results suggest that a diversity of soils can prompt underestimation of P sorption when using the Langmuir isotherm, which leads to an overestimation of available P that can have repercussions on ESM predictions of the P cycle and tropical forest productivity.

Earth system models↗