Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DYES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Broadband surface-enhanced coherent anti-Stokes Raman spectroscopy with high spectral resolution

Both the surface-enhanced Raman spectroscopy (SERS) and coherent anti-Stokes Raman spectroscopy (CARS) are widely used methods in the bio-sensing field for improving the intensity of Raman scattering process. By combining the mechanisms of CARS (coherence and nonlinear process) and SERS (plasmon resonance), a multiplicative enhancement can be achieved through surface-enhanced CARS (SECARS). Besides sensitivity, high specificity with wide spectral bandwidth is also preferred for bio-sensing techniques but not well developed in SECARS setups reported in the literature. A broadband SECARS setup with high sensitivity and high spectral resolution is presented. Rhodamine 6G dye molecules and several biomolecules are used as the model system to benchmark the functionality of the SECARS system in terms of its sensitivity, the lowest detectable concentration, and the spectral resolution. Our setup rendered single-molecule sensitivity with spectral resolution of <35 cm -1 . More than 10 2 times stronger signal-to-noise ratio compared with that of SERS is observed with the detection limit being 10 -9 m. Different from the SECARS systems in the literature, our setup employs a unique graphene-Au pyramids hybrid platform. The graphene in this structure provides additional SERS enhancement and a bio-compatible surface. Finally, this powerful technique could be instrumental in furthering the understanding of various chemical and biological processes.

42 ENGINEERING↗

Laser Microdissection and Atmospheric Pressure Chemical Ionization Mass Spectrometry Coupled for Multimodal Imaging

This paper describes the coupling of ambient laser ablation surface sampling, accomplished using a laser capture microdissection system, with atmospheric pressure chemical ionization mass spectrometry for high spatial resolution multimodal imaging. A commercial laser capture microdissection system was placed in close proximity to a modified ion source of a mass spectrometer designed to allow for sampling of laser ablated material via a transfer tube directly into the ionization region. Rhodamine 6G dye of red sharpie ink in a laser etched pattern as well as cholesterol and phosphatidylcholine in a cerebellum mouse brain thin tissue section were identified and imaged from full scan mass spectra. A minimal spot diameter of 8 m was achieved using the 10X microscope cutting objective with a lateral oversampling pixel resolution of about 3.7 m. Distinguishing between features approximately 13 m apart in a cerebellum mouse brain thin tissue section was demonstrated in a multimodal fashion including co-registered optical and mass spectral chemical images.

atmospheric pressure chemical ionization (APCI)↗

Multi-Functional Applications of H-Glass Embedded with Stable Plasmonic Gold Nanoislands

Metal nanoparticles (MNPs) are synthesized using various techniques on diverse substrates that significantly impact their properties. However, among the substrate materials investigated, the major challenge is the stability of MNPs due to their poor adhesion to the substrate. Herein, it is demonstrated how a newly developed H-glass can concurrently stabilize plasmonic gold nanoislands (GNIs) and offer multifunctional applications. The GNIs on the H-glass are synthesized using a simple yet, robust thermal dewetting process. The H-glass embedded with GNIs demonstrates versatility in its applications, such as i) acting as a room temperature chemiresistive gas sensor (70% response for NO 2 gas); ii) serving as substrates for surface-enhanced Raman spectroscopy for the identifications of Nile blue (dye) and picric acid (explosive) analytes down to nanomolar concentrations with enhancement factors of 4.8 × 10 6 and 6.1 × 10 5 , respectively; and iii) functioning as a nonlinear optical saturable absorber with a saturation intensity of 18.36 × 10 15 W m -2 at 600 nm, and the performance characteristics are on par with those of materials reported in the existing literature. In conclusion, this work establishes a facile strategy to develop advanced materials by depositing metal nanoislands on glass for various functional applications.

36 MATERIALS SCIENCE↗

Piezochromic Behavior of 2,4,6-Triphenylpyrylium Tetrachloroferrate

In advanced photonics, there is a growing interest in piezochromic luminescent materials that exhibit multicolor switching, driven by their potential applications in optical recording, memory, and sensors. Here, the piezochromic behavior of 2,4,6-triphenylpyrylium tetrachloroferrate (Py-FeCl 4 ) under high pressures from 0 to 9 GPa is reported. The observed multicolor changing properties of Py-FeCl 4 (yellow–orange–red–maroon–black) are found to be fully reversible upon decompression to ambient conditions. The mechanism of Py-FeCl 4 piezochromism is investigated via Raman, infrared, and UV–vis spectroscopy combined with powder X-ray Diffraction. The absence of structural phase transitions as well as the abrupt shifts of bandgap values together with characteristic Raman and IR peaks within 0-9 GPa suggests that the Py-FeCl 4 multicoloring switching behavior is driven by an electron transfer between the inorganic FeCl 4 – anion and the organic pyrylium cation. The obtained results demonstrate that Py-FeCl 4 dye is a good candidate for developing high-pressure sensing technologies designed to function in extreme environments. Moreover, due to the inherent role of molecular-structure relationships in the pyrylium salt's photophysical properties, findings suggest the potential discovery of piezochromic behavior in other pyrylium compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photocatalytic Reversible Color Switching Based on Titania Nanoparticles

Abstract The photoreversible color switching system holds great promise for applications in display and signage technologies, sensing devices, and security features, because light, in comparison to other stimuli such as heat and electricity, has the advantages of noninvasiveness and easy control of parameters including wavelength, intensity, coverage area, and illumination duration. Here, the recent advances in the design and synthesis of titania nanoparticles for catalytic photoreversible color switching of redox dyes and pigments, along with their applications in ink‐free, light‐printable rewritable paper and colorimetric oxygen indicators, are reviewed. Specifically, the importance of surface engineering and defect manipulation of titania nanoparticles for the color‐switching purpose, by introducing a number of methods including surface binding of sacrificial capping ligands and creating oxygen vacancies through doping of metal ions, is highlighted. Finally, a summary and perspectives on current challenges and future research directions in this field are given.

Wang, Wenshou↗

Functional Organic Semiconductors Based on Bay-Annulated Indigo (BAI)

Here, we report the advancement of organic electronics has been continually pushed by the need for stable and high performance acceptor materials. By utilizing inexpensive and stable indigo dye as a starting material, Bay-Annulated Indigo (BAI) provides a new motif for the development of semiconducting materials. Modular and straightforward synthesis makes BAI an outstanding platform for molecular design, while excellent stability, strong absorption, and high ambipolar mobility render BAI-based materials excellent candidates for organic electronics. BAI-based polymers and small molecules have taken advantage of these properties to show promising results in a variety of applications.

36 MATERIALS SCIENCE↗

Plant Cell Vacuoles: Staining and Fluorescent Probes

In plant cells, vacuoles are extremely important for growth and development, and influence important cellular functions as photosynthesis, respiration, and transpiration. Plant cells contain lytic and storage vacuoles, whose size can be different depending on cell type and tissue developmental stage. One of the main roles of vacuoles is to regulate the cell turgor in response to different stimuli. Thus studying the morphology, dynamics and physiology of vacuole is fundamentally important to advance knowledge in plant cell biology at large. The availability of fluorescent probes allows marking vacuoles in multiple ways. These may be fast, when using commercially available chemical dyes, or relatively slow, in the case of specific genetically-encoded markers based on proteins directed either to the membrane of the vacuole (tonoplast) or to the vacuole lumen. Any of these approaches provides useful information about the morphology and physiology of the vacuole.

59 BASIC BIOLOGICAL SCIENCES↗

Screening for anticancer properties of thiazolidinedione compounds in a galactose media metastatic breast cancer cell model

The metastatic tumors of breast cancer lead to the mortality of patients in part due to the failure of chemotherapeutics to reach the brain and emergence of drug resistance. With the increase in drug resistance, we focused on targeting mitochondrial metabolism, which was recently found to be a viable and novel drug target in breast cancer. Here we screened several ligands for anticancer activity in a phenotypic screen using the MTT dye as a marker for cell proliferation. MCF-7 breast cancer cells were treated with compounds in the presence of galactose to ensure mitochondrial interaction by the compounds. The lead compound of our group, NL-1, a thiazolidinedione (TZD), was found to inhibit cell proliferation with an IC{sub 50} of 7.1 μM, whereas its unsaturated derivative CI-987 was more potent with a IC{sub 50} of 3.3 μM. The TZDs were affected by substitution on both the aromatic ring and the TZD warhead. Taken together, these compounds can serve as lead structures for mitochondrial targeted drug discovery programs in breast cancer.

60 APPLIED LIFE SCIENCES↗

Tidal Residual Eddies and their Effect on Water Exchange in Puget Sound

Tidal residual eddies are one of the important hydrodynamic features in tidally dominant estuaries and coastal bays, and they could have significant effects on water exchange in a tidal system. This paper presents a modeling study of tides and tidal residual eddies in Puget Sound, a tidally dominant fjord-like estuary in the Pacific Northwest coast, using a three-dimensional finite-volume coastal ocean model. Mechanisms of vorticity generation and asymmetric distribution patterns around an island/headland were analyzed using the dynamic vorticity transfer approach and numerical experiments. Model results of Puget Sound show that a number of large twin tidal residual eddies exist in the Admiralty Inlet because of the presence of major headlands in the inlet. Simulated residual vorticities near the major headlands indicate that the clockwise tidal residual eddy (negative vorticity) is generally stronger than the anticlockwise eddy (positive vorticity) because of the effect of Coriolis force. The effect of tidal residual eddies on water exchange in Puget Sound and its sub-basins were evaluated by simulations of dye transport. It was found that the strong transverse variability of residual currents in the Admiralty Inlet results in a dominant seaward transport along the eastern shore and a dominant landward transport along the western shore of the Inlet. A similar transport pattern in Hood Canal is caused by the presence of tidal residual eddies near the entrance of the canal. Model results show that tidal residual currents in Whidbey Basin are small in comparison to other sub-basins. A large clockwise residual circulation is formed around Vashon Island near entrance of South Sound, which can potentially constrain the water exchange between the Central Basin and South Sound.

tidal residual eddy, vorticity, headland, Puget So↗

Degradation of phenolic compounds by the lignocellulose deconstructing thermoacidophilic bacterium Alicyclobacillus Acidocaldarius

Abstract Alicyclobacillus acidocaldarius, a thermoacidophilic bacterium, has a repertoire of thermo- and acid-stable enzymes that deconstruct lignocellulosic compounds. The work presented here describes the ability of A. acidocaldarius to reduce the concentration of the phenolic compounds: phenol, ferulic acid, ρ-coumaric acid and sinapinic acid during growth conditions. The extent and rate of the removal of these compounds were significantly increased by the presence of micro-molar copper concentrations, suggesting activity by copper oxidases that have been identified in the genome of A. acidocaldarius. Substrate removal kinetics was first order for phenol, ferulic acid, ρ-coumaric acid and sinapinic acid in the presence of 50 μM copper sulfate. In addition, laccase enzyme assays of cellular protein fractions suggested significant activity on a lignin analog between the temperatures of 45 and 90 °C. This work shows the potential for A. acidocaldarius to degrade phenolic compounds, demonstrating potential relevance to biofuel production and other industrial processes.

09 BIOMASS FUELS↗

On-demand in situ generation of oxygen in a nanofluidic embedded planar microband electrochemical reactor

In situ generation of reagents and their subsequent use downstream presents new opportunities to amplify the utility of nanofluidic devices by exploiting the confined geometry to address mass transport limitations on reaction kinetics and efficiency. Oxygen, an inherently valuable reactant, can be produced from electrolysis of water, a process that can be conveniently integrated within a nanofluidic system. Here, we construct and characterize a nanofluidic device consisting of a planar microband electrode embedded within a nanochannel for in situ electrochemical generation and optical monitoring of O 2 . Fluorescein, a dye with a pH-sensitive emission intensity, was used to monitor the spatiotemporal characteristics of the oxidation of H 2 O, using the co-produced H + . Application of anodic potentials at the nanochannel-embedded electrode results in a decrease in fluorescence intensity, which reflects the decreasing solution pH. A combination of fluorescence intensity and chronoamperometric response was used to quantitatively determine proton generation, and the H + /O 2 stoichiometry was then used to determine the concentration of the O 2 in the channel. Comparison of the experimental results to finite element simulations validates the use of fluorescein emission intensity to spectroscopically determine the local oxygen concentration in the nanochannel. By varying the applied potential, spatially averaged O 2 concentrations ranging from 0.13 to 0.41 mM were generated. In conclusion, the results demonstrate a convenient route to in situ modulation of the dissolved O 2 level in a nanofluidic device and the use of an optical probe to monitor its spatial and temporal distribution under flow conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Proliferative Activity of Colorectal Cancer Cells with Different Levels of CD133 Expression

We studied proliferative activity of colorectal cancer cells with different expression level of CD133 molecule associated with cancer stem cells phenotype. Analysis of BrdU incorporation into Caco-2 and HT-29 cell lines showed that the percentage of cells in the DNA synthesis phase in the CD133{sup +/high} population is higher than in CD133{sup —/low} population. The expression of proliferation marker Ki-67 and the percentage of Ki-67{sup +} cells were also higher in the CD133{sup +/high} population. Colorimetric analysis with crystal violet dye showed that the number of cells after 10-days culturing was higher in the CD133{sup +/high} population in both cell lines. These findings suggest that cells with high level of CD133 expression are characterized by higher proliferative activity, which can contribute to the tumor progression.

60 APPLIED LIFE SCIENCES↗

Using a Fluorescent 1-Methyl-4-(2-Pyren-1-Yl-Vinyl)-Pyridinium Iodide to Characterize Solvent Polarities

We used 1-methyl-4-(2-pyren-1-yl-vinyl)-pyridinium iodide, a pyridinium derivative fluorescent dye, as a solvatochromic and solvatofluorchromic probe to straightforwardly characterize the solvent polarity. The absorption and fluorescence spectra of 1-methyl-4-(2-pyren-1-yl-vinyl)-pyridinium iodide show a dramatic dependence on solvent polarities in the high-polar range. It exhibits two absorption peaks around 400 and 450 nm, as well as an emission maximum at 605 nm. Several parameters (ratio of the two absorption peaks, wavelength of the principal absorption peak, fluorescence signal, and ratio of fluorescence intensities excited at the two absorption bands) are linearly dependent on the solvent polarity–polarizability values. Strong correlations have been also obtained with the P' and P{sub y} polarity scales with small deviations. Moreover, 1-methyl-4-(2-pyren-1-yl-vinyl)-pyridinium iodide possesses high fluorescence quantum yield (0.38–0.54) and relatively long lifetime (2.2–2.6 ns) in all studied organic solvents. All these optical properties make 1-methyl-4-(2-pyren-1-yl-vinyl)-pyridinium iodide a favorable probe to quantitatively characterize the solvent polarities in the high-polar range through a multiparametric approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication and characterization of electrospun titania nanofibers

Titania (TiO2) nanofibers were fabricated by electrospinning three representative spin dopes made of titanium (IV) n-butoxide (TNBT) and polyvinylpyrrolidone (PVP) with the TNBT/PVP mass ratio being 1/2 in three solvent systems including N,N-dimethylformamide (DMF), isopropanol, and DMF/isopropanol (1/1 mass ratio) mixture, followed by pyrolysis at 500 C. The detailed morphological and structural properties of both the as-electrospun precursor nanofibers and the resulting final TiO2 nanofibers were characterized by SEM, TEM, and XRD. The results indicated that the precursor nanofibers and the final TiO2 nanofibers made from the spin dopes containing DMF alone or DMF/isopropanol mixture as the solvent had the common cylindrical morphology with diameters ranging from tens to hundreds of nanometers, while those made from the spin dope containing isopropanol alone as the solvent had an abnormal concave morphology with sizes/widths ranging from sub-microns to microns. Despite the morphological discrepancies, all precursor nanofibers were structurally amorphous without distinguishable phase separation, while all final TiO2 nanofibers consisted of anatase-phased TiO2 single-crystalline grains with sizes of approximately 10 nm. The electrospun TiO2 nanofiber mat is expected to significantly outperform other forms (such as powder and film) of TiO2 for the solar cell (particularly dye-sensitized solar cell) and photo-catalysis applications.

Chandrasekar, Ramya↗

The promise of solution-processed Fe 2 GeS 4 thin films in iron chalcogenide photovoltaics

The olivine Fe 2 GeS 4 , featuring non-toxic elements, cost-effective synthesis, and suitable optoelectronic properties, recently emerged as a promising light-absorbing candidate. Fe 2 GeS 4 precursor powders obtained via a simple solution-based process were converted to highly crystalline Fe 2 GeS 4 powders upon a thermal treatment in controlled atmosphere. Thin films fabricated by dip coating in the Fe 2 GeS 4 precursor dispersion and subjected to the same thermal treatment render high-purity Fe 2 GeS 4 thin films with a band gap of 1.4 eV, measured by room-temperature photoluminescence. Using Fe 2 GeS 4 thin films as the sole absorber in a solution-based solar cell, open-circuit voltages of 361 mV are observed, while the use of the Fe 2 GeS 4 films as counter electrodes in dye-sensitized solar cell constructs enhances the overall power conversion efficiency of the cell by a factor of five. Finally, this is the first report of a photovoltaic device based onFe 2 GeS 4 .

14 SOLAR ENERGY↗

Carbazole Substituted BODIPYs: Synthesis, Computational, Electrochemical and DSSC Studies

Carbazole and p-anisyl substituted BODIPY dyes with a cyanoacetic acid anchoring group have been prepared and their spectral, electrochemical properties and photosensitizing potential in DSSC have been evaluated. X-ray structure of N-phenylcarbazole substituted BODIPY revealed lower torsion angle between BODIPY plane and carbazole plane, suggesting increased communication between the two units. DFT studies indicated effective electronic interactions between the BODIPY unit and carbazole substituents. The N-butylcarbazole and N-phenylcarbazole substituted BODIPYs showed anodic shifts in their reduction potentials, indicating facile reduction process. The predicted HOMO–LUMO gaps are in agreement with the electrochemical result and the lower band gap was observed for the carbazole substituted BODIPYs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photochemical Degradation of Curcumin: a Mechanism for Aqueous Based Sensing of Fluoride

The present work describes the enhanced photochemical degradation of natural dye Curcumin in acetonitrile–water mixture in the presence of fluoride upon irradiation with light. The strong basicity of fluoride modifies the solvent environment around Curcumin molecule leading to alkaline mediated degradation of Curcumin which is further accelerated by irradiation with light. The photochemical degradation of Curcumin is studied using absorption and fluorescence spectroscopy and verified using infrared spectroscopy and fluorescence lifetime studies. The results of the work indicate that the method of Curcumin irradiation can be used as a sensing technique for fluoride detection in a wide range.

74 ATOMIC AND MOLECULAR PHYSICS↗

Biocompatible Water Soluble Polyacrylic Acid Coated CdSe/Cu Quantum Dot Conjugates for Biomolecule Detection

Biocompatible polyacrylic acid functionalized CdSe/Cu quantum dot conjugates were synthesized to be used for biomolecules detection. The study results demonstrate the conjugation of the 2.5-3 nm QD with gram negative bacteria with a low detection limit of 28 cfu/ml. The photoluminescence (PL) intensity was correlated to bacterial count, cellular proteins and exopolysaccharides in the tested samples. Confocal Scanning Laser Microscopy (CSLM) images showed significant QD uptake within the cells, both cytoplasm and DNA were the predominant targeted biomolecules, higher fluorescent uptake was shown in gram negative bacteria than that observed for gram positive bacteria. Moreover, PL showed that there was a distinction between live and dead cells as well as gram negative and gram positive cells. Cell viability was not affected even after 6 days (100% viability) rendering it a non-toxic QD. The method is simple and is performed in a single step within approximately 10 min as compared to multi-step protocols for classical microbial count or fluorescent dye staining. All the above results indicate that the CdSe/Cu-PAA QDs are suitable for biomolecule detection, bio-labeling and bioimaging applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗