Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIFFUSION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Compact Models for Defect Diffusivity in Semiconductor Alloys.

Predicting transient effects caused by short - pulse neutron irradiation of electronic devices is an important part of Sandia's mission. For example , predicting the diffusion of radiation - induced point defects is needed with in Sandia's Qualification Alternative to the Sandia Pulsed Reactor (QASPR) pro gram since defect diffusion mediates transient gain recovery in QASPR electronic devices. Recently, the semiconductors used to fabricate radiation - hard electronic devices have begun to shift from silicon to III - V compounds such as GaAs, InAs , GaP and InP . An advantage of this shift is that it allows engineers to optimize the radiation hardness of electronic devices by using alloy s such as InGaAs and InGaP . However, the computer codes currently being used to simulate transient radiation effects in QASP R devices will need to be modified since they presume that defect properties (charge states, energy levels, and diffusivities) in these alloys do not change with time. This is not realistic since the energy and properties of a defect depend on the types of atoms near it and , therefore, on its location in the alloy. In particular, radiation - induced defects are created at nearly random locations in an alloy and the distribution of their local environments - and thus their energies and properties - evolves with time as the defects diffuse through the alloy . To incorporate these consequential effects into computer codes used to simulate transient radiation effects, we have developed procedures to accurately compute the time dependence of defect energies and properties and then formulate them within compact models that can be employed in these computer codes. In this document, we demonstrate these procedures for the case of the highly mobile P interstitial (I P ) in an InGaP alloy. Further dissemination only as authorized to U.S. Government agencies and their contractors; other requests shall be approved by the originating facility or higher DOE programmatic authority.

36 MATERIALS SCIENCE↗

Effect of the state of vacancy equilibrium on diffusion of chromium impurity in gallium arsenide

The results of studying the diffusion of Cr impurity in GaAs according to electrical measurements are reported. Dependences of the diffusion coefficient and limiting solubility of electrically active Cr atoms in GaAs on temperature (at fixed pressures of As vapors) and on the pressure of As vapors (at fixed temperatures) are determined. The dependence of the Cr diffusion coefficient in GaAs on the ratio between the volume of the sample under study to the volume of the cell in the case of pronounced deviation from the crystal's stoichiometry towards Ga excess is established. The obtained experimental data are analyzed on the basis of concepts concerning the dissociative mechanism of migration of Cr atoms in the GaAs crystal lattice; according to this mechanism, the diffusion coefficient depends heavily on the concentration of Ga vacancies.

36 MATERIALS SCIENCE↗

Effects of temporally varying liquid-phase mass diffusivity in multicomponent droplet gasification

The relative roles of liquid-phase diffusional resistance and volatility differential in multicomponent droplet gasification are revisited, recognizing that liquid-phase mass diffusivities can be substantially increased as the droplet is progressively heated upon initiation of gasification, leading to a corresponding substantial weakening of the diffusional resistance. Calculations performed using realistic and temperature-dependent thermal and mass diffusivities indeed substantiate this influence. In particular, the calculated results agree with the literature experimental data, indicating that the gasification mechanism of multicomponent fuels is intermediate between diffusion and distillation limits. Investigation was also performed on gasification at elevated pressures, recognizing that the liquid boiling point and hence the attainable droplet temperature would increase with increasing pressure, causing further weakening of the liquid-phase diffusional resistance. This possibility was again verified through calculated results, suggesting further departure from diffusion limit toward distillation limit behavior for gasification at high pressures. The study also found that diffusional resistance is stronger for the lighter, gasoline-like fuels as compared to the heavier, diesel-like fuels because the former have overall lower boiling points, lower attainable droplet temperatures, and hence lower mass diffusivities in spite of their lower molecular weights. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Effect of carbon dioxide and nitrogen on the diffusivity of methane confined in nano-porous carbon aerogel

The microscopic diffusivity of methane (CH{sub 4}) confined in nano-porous carbon aerogel was investigated as a function of added carbon dioxide (CO{sub 2}) and nitrogen (N{sub 2}) pressure using quasi-elastic neutron scattering (QENS). In the range of the external pressure of 1-2.5 MPa, the self-diffusivity of methane was found to increase with CO{sub 2} pressure and remain practically unchanged in the N{sub 2} environment. Increasing mobility of methane with CO{sub 2} pressure suggests that the adsorbed CH4 molecules become gradually replaced by CO{sub 2} on the surface of carbon aerogel pores, whereas the presence of N{sub 2} does not induce the replacement. The molecular mobility of the methane, with or without added carbon dioxide and nitrogen, is described by the unrestricted diffusion model, which is characteristic of methane compressed in small pores. On the other hand, both nitrogen and carbon dioxide molecules in carbon aerogel, when studied alone, with no methane present, follow a jump diffusion process, characteristic of the molecular mobility in the densified adsorbed layers on the surface of the aerogel pores.

03 NATURAL GAS↗

Modeling the Contribution of Precipitation Loss to a Radiation Belt Electron Dropout Observed by Van Allen Probes

A drift-diffusion model is used to simulate the low-altitude electron distribution, accounting for azimuthal drift, pitch angle diffusion, and atmospheric backscattering effects during a rapid electron dropout event on 21st August 2013, at L = 4.5. Additional external loss effects are introduced during times when the low-altitude electron distribution cannot be reproduced by diffusion alone. Here, the model utilizes low-altitude electron count rate data from five POES/MetOp satellites to quantify pitch angle diffusion rates. Low-altitude data provides critical constraint on the model because it includes the drift loss cone region where the electron distribution in longitude is highly dependent on the balance between azimuthal drift and pitch angle diffusion. Furthermore, a newly derived angular response function for the detectors onboard POES/MetOp is employed to accurately incorporate the bounce loss cone measurements, which have been previously contaminated by electrons from outside the nominal field-of-view. While constrained by low-altitude data, the model also shows reasonable agreement with high-altitude data. Pitch angle diffusion rates during the event are quantified and are faster at lower energies. Precipitation is determined to account for all of the total loss observed for 450 keV electrons, 88% for 600 keV and 38% for 900 keV. Predictions made in the MeV range are deemed unreliable as the integral energy channels E3 and P6 fail to provide the necessary constraint at relativistic energies.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of interface bonding and defects on boron diffusion at Si/SiO{sub 2} interface

We perform first-principles density functional calculations to find the migration pathway and barrier for B diffusion at the Si/SiO{sub 2} interface. For various interface models, in which crystalline α-quartz or amorphous silica (a-SiO{sub 2}) is placed on Si, we examine stable and metastable configurations of B-related defects which play a role in B diffusion. While a substitutional B alone is immobile in Si, it tends to diffuse to the interface via an interstitialcy mechanism in the presence of a self-interstitial and then changes into an interstitial B in oxide via a kick-out mechanism, leaving the self-interstitial at the interface. At the defect-free interface, where bridging O atoms are inserted to remove interface dangling bonds, an interstitial B prefers to intervene between the interface Si and bridging O atoms and subsequently diffuses through the hollow space or along the network of the Si-O-Si bonds in oxide. The overall migration barriers are calculated to be 2.02–2.12 eV at the Si/α-quartz interface, while they lie in the range of 2.04 ± 0.44 eV at the Si/a-SiO{sub 2} interface, similar to that in α-quartz. The migration pathway and barrier are not significantly affected by interface defects such as suboxide bond and O protrusion, while dangling bonds in the suboxide region can increase the migration barrier by about 1.5 eV. The result that the interface generally does not hinder the B diffusion from Si to SiO{sub 2} assists in understanding the underlying mechanism for B segregation which commonly occurs at the Si/SiO{sub 2} interface.

36 MATERIALS SCIENCE↗

Effect of controlled magnetic island bifurcation on electron diffusion

Magnetic islands strongly influence cross-field electron transport in magnetized plasmas. In particular, bifurcations of the island topology modify the number and location of O-points, X-points, and separatrix boundaries, thereby altering diffusion pathways. In recent DIII-D experiments, external magnetic perturbations were used to rotate and periodically bifurcate the island on the q = 2 surface, causing a switchback between a q = 2/1-dominated structure and a narrower q = 4/2-dominated structure. To investigate how this topological change affects electron transport, we employ the field line tracing code TRIP3D with an implemented collisional operator. Thermal, tracer electrons launched from O-points, X-points, and outside separatrix boundaries reveal distinct diffusion regimes, including classical, subdiffusive, and superdiffusive behavior, depending on both the dominant island mode and launch location. These results suggest that island bifurcation can alter electron diffusion across rational surfaces, with direct implications for particle confinement. While the present work emphasizes diffusion as a general framework, the findings provide insight into the conditions under which electron trapping into an island or stochastization of the island's separatrix can enable additional mechanisms, such as the generation of energetic electrons.

DIII-D↗

Diffusion quantum Monte Carlo calculation of the quasiparticle effective mass of the two-dimensional homogeneous electron gas

The quasiparticle effective mass is a key quantity in the physics of electron gases, describing the renormalization of the electron mass due to electron-electron interactions. Two-dimensional electron gases are of fundamental importance in semiconductor physics, and there have been numerous experimental and theoretical attempts to determine the quasiparticle effective mass in these systems. In this work we report quantum Monte Carlo results for the quasiparticle effective mass of a two-dimensional homogeneous electron gas. Our calculations differ from previous quantum Monte Carlo work in that much smaller statistical error bars have been achieved, allowing for an improved treatment of finite-size effects. Additionally, in some cases we have also been able to use larger system sizes than previous calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the state of vacancy equilibrium on diffusion of chromium impurity in gallium arsenide

The results of studying the diffusion of Cr impurity in GaAs according to electrical measurements are reported. Dependences of the diffusion coefficient and limiting solubility of electrically active Cr atoms in GaAs on temperature (at fixed pressures of As vapors) and on the pressure of As vapors (at fixed temperatures) are determined. The dependence of the Cr diffusion coefficient in GaAs on the ratio between the volume of the sample under study to the volume of the cell in the case of pronounced deviation from the crystal's stoichiometry towards Ga excess is established. The obtained experimental data are analyzed on the basis of concepts concerning the dissociative mechanism of migration of Cr atoms in the GaAs crystal lattice; according to this mechanism, the diffusion coefficient depends heavily on the concentration of Ga vacancies.

36 MATERIALS SCIENCE↗

Radiation Effects of Protons and Electrons in Silicon Diffused-Junction Detectors

Diffused n-on-p silicon particle detectors were irradiated with 1-Mev electrons, and with 31-Mev and 8.2-Mev protons. The detector capacitance was observed to increase with electron irradiation and to decrease with proton irradiation. A physical interpretation is given in terms of defect energy levels known to be introduced in silicon by irradiation. Defect ionization states are taken to be characteristic of the space-charge region, rather than of bulk silicon. The relation to other studies of damage in semiconductor particle detectors is pointed out, considering differences in the types of detector and irradiation used. The significance of these results is discussed for detector applications where the damage threshold is exceeded.

Scott, R. E.↗

Response of convective-diffusive transport to spatial and temporal variations in effective gravity

The response of heat, mass, and momentum transport to conditions characteristic of the microgravity environment is studied. It is found that the orientation of the experiment with respect to the steady component of the residual gravity is a crucial factor in determining the suitability of the spacecraft as a means of suppressing or eliminating unwanted effects caused by buoyant fluid motion. The process is highly sensitive to transient disturbances.

Alexander, J. Iwan D.↗