Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Comparators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Non-stationary Geostatistical Modeling: A Case Study Comparing LVA Estimation Frameworks

Incorporating locally varying anisotropy (LVA) in geostatistical modeling improves estimates for structurally complex domains where a single set of anisotropic parameters modeled globally do not account for all geological features. In this work, the properties of two LVA-geostatistical modeling frameworks are explored through application to a complexly folded gold deposit in Ghana. The inference of necessary parameters is a significant requirement of geostatistical modeling with LVA; this work focuses on the case where LVA orientations, derived from expert geological interpretation, are used to improve the grade estimates. The different methodologies for inferring the required parameters in this context are explored. The results of considering different estimation frameworks and alternate methods of parameterization are evaluated with a cross-validation study, as well as visual inspection of grade continuity along select cross sections. Results show that stationary methodologies are outperformed by all LVA techniques, even when the LVA framework has minimal guidance on parameterization. Findings also show that additional improvements are gained by considering parameter inference where the LVA orientations and point data are used to infer the local range of anisotropy. Considering LVA for geostatistical modeling of the deposit considered in this work results in better reproduction of curvilinear geological features.

58 GEOSCIENCES↗
DOE OSTI2018

Experimental Investigations to Enhance the Tribological Performance of Engine Oil by Using Nano-Boric Acid and Functionalized Multiwalled Carbon Nanotubes: A Comparative Study to Assess Wear in Bronze Alloy

In various mechanical systems, lubricants are generally used to reduce friction and wear; thus, the total energy loss in the mechanical systems can be minimized by the proper enhancement of lubrication properties. In general, friction modifiers and antiwear additives are used to improve the tribological properties of the lubricant. However, the use of these additives has to be phased out due to their fast chemical degradation in their applications and other environmental issues. In recent years, the use of nanoparticles as a potential lubricant additive has received considerable attention because of its excellent mechanical and tribological characteristics. The present work describes the tribological behavior of nano-boric acid, multiwalled carbon nanotubes (MWCNTs), and functionalized multiwalled carbon nanotubes (FMWCNTs) modified with carboxylic acid. These nanoparticles were used to enhance the tribological properties of engine oil (SAE20W40) used to lubricate bronze alloy samples. The performance of these nano-coolants was assessed on a linear reciprocating ball-on-flat tribometer. Results highlight the friction and wear behavior of the nano-boric acid, MWCNTs, and FMWCNTs under three varying parameters such as the effect of nanoparticles concentration, load-carrying capacity, and sliding speed. The addition of nano-boric acid, MWCNTs, and FMWCNTs has significantly improved the tribological properties of the base lubricant. The addition of 0.5 wt.% of nano-boric acid, MWCNTs, and FMWCNTs to the base lubricant has decreased the coefficient of friction by 19.76, 30.55, and 35.65%, respectively, and a significant reduction in wear volume by 55.17, 71.42, and 88.97% was obtained in comparison with base lubricant.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Comparative In Vitro Evaluation Between Zirconia and Veneer Ceramic Materials Using Different Techniques

Zirconia surface treatment using different techniques could be employed to overcome the delamination issue reported between veneering ceramic materials and the corresponding zirconia core. The study subjected yttria partially stabilized zirconia core material to grinding and sandblasting as a first surface treatment. An airbrush gun spraying technique was used to coat a uniform thin layer of veneering ceramic (IPS e.max Ceram and Noritake Cerabien ZR) on the core materials followed by performing laser scanning as a second surface treatment. The specimens were investigated for surface topography, interface analysis, elemental compositions, phase transformation, and fracture mode patterns using profilometer, SEM, EDS, XRD, and stereomicroscope. The impact of laser scanning on the shear bond strength before and after storage of specimens in artificial saliva was also studied. Transformable tetragonal phase to monoclinic was predominant in sandblasted specimens followed by laser scanning with observation of micro-cracks at interface. The grinding followed by laser scanning yielded satisfactory outcomes in terms of the presence of coating property. The phase transformation was not detected through the latter technique. The technique greatly enhanced the roughness property and bond strength values which might be considered as a reliable application to improve the longevity of fixed dental crowns in load bearing areas.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Comparing Empty and Filled Fullerene Cages with High-Resolution Trapped Ion Mobility Spectrometry

We have used trapped ion mobility spectrometry (TIMS) to obtain highly accurate experimental collision cross sections (CCS) for the fullerene C{sub 80}{sup −} and the endohedral metallofullerenes La{sub 2}@C{sub 80}{sup −}, Sc{sub 3}N@C{sub 80}{sup −}, and Er{sub 3}N@C{sub 80}{sup −} in molecular nitrogen. The CCS values of the endohedral fullerenes are 0.2% larger than that of the empty cage. Using a combination of density functional theory and trajectory calculations, we were able to reproduce these experimental findings theoretically. Two effects are discussed that contribute to the CCS differences: (i) a small increase in fullerene cage size upon endohedral doping and (ii) charge transfer from the encapsulated moieties to the cage thus increasing the attractive charge-induced dipole interaction between the (endohedral) fullerene ion and the nitrogen bath gas molecules. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Comparative analysis of methods for integrating various environmental impacts as a single index in life cycle assessment

Previous studies have proposed several methods for integrating characterized environmental impacts as a single index in life cycle assessment. Each of them, however, may lead to different results. This study presents internal and external normalization methods, weighting factors proposed by panel methods, and a monetary valuation based on an endpoint life cycle impact assessment method as the integration methods. Furthermore, this study investigates the differences among the integration methods and identifies the causes of the differences through a case study in which five elementary school buildings were used. As a result, when using internal normalization with weighting factors, the weighting factors had a significant influence on the total environmental impacts whereas the normalization had little influence on the total environmental impacts. When using external normalization with weighting factors, the normalization had more significant influence on the total environmental impacts than weighing factors. Due to such differences, the ranking of the five buildings varied depending on the integration methods. The ranking calculated by the monetary valuation method was significantly different from that calculated by the normalization and weighting process. The results aid decision makers in understanding the differences among these integration methods, and, finally, help them select the method most appropriate for the goal at hand.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

A comparative analysis on how different governance contexts may influence Strategic Environmental Assessment

Highlights: • Cultural and institutional values impact how SEA is interpreted and carried out. • Governance contexts influence how SEA systems operate. • SEA systems are facing constraints of a more normative and cognitive nature. • SEA capacity is ‘context-influenced’ and dependent of SEA institutionalisation. - Abstract: This paper explores the relationship between governance contexts and the development and outcomes of Strategic Environmental Assessment (SEA). The main objective of this paper is to understand if, and how, the governance context may influence the system and institutionalisation of SEA, and the capacity of SEA to reach its objectives. The research methodology is based on the comparison of six country-cases that have an established SEA system, including three European countries, two Asian countries and one in Latin American, with distinct national culture and political-administrative setting. Results show that cultural and institutional values impact how SEA is interpreted and carried out, and that SEA systems are facing constraints of a more normative and cognitive nature. Connecting governance contexts and patterns in the SEA systems confirm that SEA is not ‘context free’, but instead ‘context-influenced’, while its capacity is dependent on its level of adaptation to the governance environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Comparative Analysis of Natural Gas Cogeneration Incentives on Electricity Production in Latin America

An analysis to assess the influence of country-dependent variables and incentives on the feasibility of natural gas cogeneration projects in Latin America is presented in this work. The analysis is performed using a hypothetical industrial plant, where the cogeneration solution consists in the recovery of waste heat from the power generation for steam production. The feasibility is evaluated by calculating the Return of Investment (ROI) and the Internal Rate of Return (IRR) of the project. Eight Latin American countries are studied considering their specific natural gas markets, regulation, and macroeconomic variables. Two scenarios, electricity production for self-consumption and electricity production with power surplus sale, are independently analyzed considering the effects of available incentives. In the countries where the project is feasible, the application of incentives leads to a significant reduction in the ROI and, consequently, to an increment in the IRR. The effect of the interest rate and environmental impact were also analyzed. In general terms, along the region, the regulation for cogeneration is incipient while incentives are very standard and similar respect to lowering of import, Value-Added Tax (VAT), and income taxes, which seems to be designed purely to promote capital investment. Following the results from this study, it is of paramount importance to create new policy instruments in the future to advance the regulatory framework for cogeneration in Latin America.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Comparative experimental study of heat transfer processes in accumulation energy recovery exchangers

In this study, an experimental comparison between three different energy accumulating ceramic heat exchangers for energy recovery in ventilation systems was presented. The units were selected to represent three different approaches on the energy recovery process: honeycomb structure with more accumulation mass (more energy can be stored in one unit)- Unit 1.1, honeycomb structure with lower accumulation mass- Unit 1.2, and a rectangular structure with expanded heat transfer surface- Unit 1.3. The achieved results are useful for the future application of such units in ventilation systems. It was established that all evaluated units demonstrated an acceptable effectiveness of thermal energy recovery from the exhaust air. Their average energy recovery efficiency ranged between 70 % and 80 %, aligning with expected performance benchmarks for regenerative heat exchangers employed in contemporary mechanical ventilation systems. It was also established that the factor which has the highest impact on thermal effectiveness is the heat transfer surface available in the tested heat exchangers. Units with the highest number of channels (i.e., with the highest amount of single channel walls, which can be used for heat transfer) achieve the highest thermal effectiveness. However, higher thermal effectiveness can negatively affect the ventilation potential of the units. Unit 1.3, which was characterized by the highest thermal efficiency, was also characterized by the lowest achievable flow rate. It was also found that the important technical aspect that should be taken into account when analyzing accumulation energy recovery units is also the fluctuation of the supply air temperature. The ability to ensure minimal temperature fluctuations is a significant operational advantage, as it ensures a higher level of safety at lower outside temperatures.

Energy recovery↗
DOE OSTI2018

Close Margins Less Than 2 mm Are Not Associated With Higher Risks of 10-Year Local Recurrence and Breast Cancer Mortality Compared With Negative Margins in Women Treated With Breast-Conserving Therapy

The 2014 Society of Surgical Oncology–American Society for Radiation Oncology consensus suggested “no ink on tumor” is a sufficient surgical margin for invasive breast cancer treated with breast-conserving surgery (BCS). Whether close margins <2 mm are associated with inferior outcomes remains controversial. This study evaluated 10-year outcomes by margin status in a population-based cohort treated with BCS and adjuvant radiation therapy (RT).

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2016

Could the description on polynuclear superhalogens by DFT be comparable with high-level ab initio results? A comparison between DFT and CCSD(T)

A systematic density functional theory study including 17 exchange-correlation functionals was performed on different types of superhalogens with high level coupled-cluster single double including perturbative triple excitations (CCSD(T)) results as the reference. The superhalogens selected here cover the ranges from mononuclear to polynuclear structures and from structures with halogen-atom ligands to those with non-halogen ligands, e.g., [MgX{sub 3}]{sup −}, [Mg{sub 2}X{sub 5}]{sup −}, and [Mg{sub 3}X{sub 7}]{sup −} (X = F, Cl, CN). It is clearly indicated that three double-hybrid functionals B2T-PLYP, B2GP-PLYP, B2K-PLYP as well as the range-separated hybrid functional ωB97X are capable of providing results which approach the accuracy at the CCSD(T) level. The basis set effect is usually moderate and, in most cases, it is enough to utilize the basis set of triple-ξ quality, e.g., Def2-TZVP. In addition, the results of the HF and MP2 method are also acceptable here, especially for polynuclear superhalogens where CCSD(T) is probably unpractical.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Frequency response of a gas ring laser with a variable-sign frequency bias in the case of frequency nonreciprocity comparable with the bias amplitude

The dependence of the beat frequency of counterpropagating waves on the rotation rate is studied theoretically and experimentally in a gas ring laser (GRL) with a Zeeman effect-based, variable-sign frequency bias. Use is made of magneto-optical biases of two types, namely, a rectangular (meander) bias and a combined bias consisting of fast and slow meanders. At high rotation rates, when the frequency nonreciprocity determined by the rotation rate is close in magnitude to the amplitude of the variable-sign frequency bias, the dynamic locking bands take maximum values and there arise the most extensive deviations of the frequency response from the ideal response. Comparison of experimental and theoretical results for the widths of dynamic bands that appear in this region of the measured rotation rates shows good agreement between theory and experiment. The results suggest that the frequency response of a GRL in this region can be described by one differential equation for the phase difference of counterpropagating waves. (laser gyroscopes)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Comparative analysis of characteristics of a supersonic cw chemical HF laser on molecular fluorine and nitrogen trifluoride

We have experimentally studied the characteristics of a supersonic cw chemical HF laser with a flat nozzle array based on a nozzle – nozzle reagent mixing scheme operating with the use of F{sub 2} – D{sub 2} – He and NF{sub 3} – D{sub 2} – He fuel compositions in an atomic fluorine generator. The active medium flow field pattern, its gas-dynamic characteristics, and the laser radiation spectrum are considered. The comparison of these characteristics has made it possible to establish a strong impact on the flow field (lasing zone length) of the chemical composition of the combustion products from the atomic fluorine generator. The gas-dynamic parameters of the active medium formed by using a NF{sub 3} – D{sub 2} – He fuel have turned out to be less acceptable in terms of the gas flow pressure recovery than in the case of F{sub 2} – D{sub 2} – He fuel, while the radiation spectrum was more preferable from the viewpoint of passing through the atmosphere. (paper)

36 MATERIALS SCIENCE↗
DOE OSTI2020

A comparative genomics approach identifies contact-dependent growth inhibition as a virulence determinant

Emerging evidence suggests the Pseudomonas aeruginosa accessory genome is enriched with uncharacterized virulence genes. Identification and characterization of such genes may reveal novel pathogenic mechanisms used by particularly virulent isolates. In this work, we utilized a mouse bacteremia model to quantify the virulence of 100 individual P. aeruginosa bloodstream isolates and performed whole-genome sequencing to identify accessory genomic elements correlated with increased bacterial virulence. From this work, we identified a specific contact-dependent growth inhibition (CDI) system enriched among highly virulent P. aeruginosa isolates. CDI systems contain a large exoprotein (CdiA) with a C-terminal toxin (CT) domain that can vary between different isolates within a species. Prior work has revealed that delivery of a CdiA-CT domain upon direct cell-to-cell contact can inhibit replication of a susceptible target bacterium. Aside from mediating interbacterial competition, we observed our virulence-associated CdiA-CT domain to promote toxicity against mammalian cells in culture and lethality during mouse bacteremia. Structural and functional studies revealed this CdiA-CT domain to have in vitro tRNase activity, and mutations that abrogated this tRNAse activity in vitro also attenuated virulence. Furthermore, CdiA contributed to virulence in mice even in the absence of contact-dependent signaling. Overall, our findings indicate that this P. aeruginosa CDI system functions as both an interbacterial inhibition system and a bacterial virulence factor against a mammalian host. These findings provide an impetus for continued studies into the complex role of CDI systems in P. aeruginosa pathogenesis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Bayesian probability of agreement for comparing the similarity of response surfaces

For a variety of linear and generalized linear models, there may be interest in evaluating whether the expected response values in two different populations are sufficiently similar to be considered practically equivalent. The probability of agreement has been introduced as a strategy for quantifying the similarity between two groups. We propose a Bayesian version of the probability of agreement to quantify the similarity between linear and generalized linear response surfaces. The proposed methodology is based on Markov chain Monte Carlo estimation and it allows for an intuitive interpretation based directly on population parameters. As demonstrated, the methodology can be flexibly applied to a variety of different models. We illustrate its use with three examples for which the response depends on predictor variables through a linear, logistic, or Poisson regression model. The computation associated with this approach has been automated with a freely available R Shiny app.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Comparing cosmic web classifiers using information theory

We introduce a decision scheme for optimally choosing a classifier, which segments the cosmic web into different structure types (voids, sheets, filaments, and clusters). Our framework, based on information theory, accounts for the design aims of different classes of possible applications: (i) parameter inference, (ii) model selection, and (iii) prediction of new observations. As an illustration, we use cosmographic maps of web-types in the Sloan Digital Sky Survey to assess the relative performance of the classifiers T-WEB, DIVA and ORIGAMI for: (i) analyzing the morphology of the cosmic web, (ii) discriminating dark energy models, and (iii) predicting galaxy colors. Our study substantiates a data-supported connection between cosmic web analysis and information theory, and paves the path towards principled design of analysis procedures for the next generation of galaxy surveys. We have made the cosmic web maps, galaxy catalog, and analysis scripts used in this work publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Functional and comparative genomics reveals conserved noncoding sequences in the nitrogen–fixing clade

Nitrogen is one of the most inaccessible plant nutrients, but certain species have overcome this limitation by establishing symbiotic interactions with nitrogen-fixing bacteria in the root nodule. This root–nodule symbiosis (RNS) is restricted to species within a single clade of angiosperms, suggesting a critical, but undetermined, evolutionary event at the base of this clade. To identify putative regulatory sequences implicated in the evolution of RNS, we evaluated the genomes of 25 species capable of nodulation and identified 3091 conserved noncoding sequences (CNS) in the nitrogen-fixing clade (NFC). We show that the chromatin accessibility of 452 CNS correlates significantly with the regulation of genes responding to lipochitooligosaccharides in Medicago truncatula. These included 38 CNS in proximity to 19 known genes involved in RNS. Five such regions are upstream of MtCRE1, Cytokinin Response Element 1, required to activate a suite of downstream transcription factors necessary for nodulation in M. truncatula. Genetic complementation of an Mtcre1 mutant showed a significant decrease of nodulation in the absence of the five CNS, when they are driving the expression of a functional copy of MtCRE1. CNS identified in the NFC may harbor elements required for the regulation of genes controlling RNS in M. truncatula.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

The first two chromosome‐scale genome assemblies of American hazelnut enable comparative genomic analysis of the genus Corylus

Summary The native, perennial shrub American hazelnut ( Corylus americana ) is cultivated in the Midwestern United States for its significant ecological benefits, as well as its high‐value nut crop. Implementation of modern breeding methods and quantitative genetic analyses of C. americana requires high‐quality reference genomes, a resource that is currently lacking. We therefore developed the first chromosome‐scale assemblies for this species using the accessions ‘Rush’ and ‘Winkler’. Genomes were assembled using HiFi PacBio reads and Arima Hi‐C data, and Oxford Nanopore reads and a high‐density genetic map were used to perform error correction. N50 scores are 31.9 Mb and 35.3 Mb, with 90.2% and 97.1% of the total genome assembled into the 11 pseudomolecules, for ‘Rush’ and ‘Winkler’, respectively. Gene prediction was performed using custom RNAseq libraries and protein homology data. ‘Rush’ has a BUSCO score of 99.0 for its assembly and 99.0 for its annotation, while ‘Winkler’ had corresponding scores of 96.9 and 96.5, indicating high‐quality assemblies. These two independent assemblies enable unbiased assessment of structural variation within C. americana , as well as patterns of syntenic relationships across the Corylus genus. Furthermore, we identified high‐density SNP marker sets from genotyping‐by‐sequencing data using 1343 C. americana , C. avellana and C. americana × C. avellana hybrids, in order to assess population structure in natural and breeding populations. Finally, the transcriptomes of these assemblies, as well as several other recently published Corylus genomes, were utilized to perform phylogenetic analysis of sporophytic self‐incompatibility (SSI) in hazelnut, providing evidence of unique molecular pathways governing self‐incompatibility in Corylus .

54 ENVIRONMENTAL SCIENCES↗