Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHART”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

A 15,000-hour cyclic endurance test of an 8-centimeter-diameter electron bombardment mercury ion thruster

A laboratory model 8 cm thruster with improvements to minimize ion chamber erosion and peeling of sputtered metal was subjected to a cyclic endurance test for 15,040 hours and 460 restarts. A charted history of several thruster operating variables and off-normal events are shown in 600-hour segments at three points in the test. The transient behavior of these variables during a typical start-stop cycle is presented. Finding of the post-test inspection confirmed most of the expected results. Charge exchange ions caused normal accelerator grid erosion. The workability of the various design features was substantiated, and attainable improvements in propellant utilization efficiency should significantly reduce accelerator erosion.

Nakanishi, S.↗

LANDSAT menhaden and thread herring resources investigation, Gulf of Mexico

The author has identified the following significant results. The most significant achievements thus far include the successful charting of high probability fishing areas from LANDSAT MSS data and the successful simulation of an operational satellite system to provide tactical information for the commercial harvest of menhaden.

Savastano, K.↗

Centroid and moments of an area using a digitizer

The centroid and moments of an area program provides the centroid, moments of inertia, product of inertia, radii of gyration, and area of any closed planar geometric figure. The figure must be available in graphic form and is digitized once with chart digitizer (graphic tablet). The digitizer origin may be set anywhere on the digitizer table. After digitizing, fifteen quantities are calculated and displayed: (1) area (2) moment of inertia of area with respect to digitizer x-axis, (3) moment of inertia of area with respect to digitizer y-axis, (4) product of inertia of area with respect to digitizer axes, (5) first moment of x for digitizer axes, (6) first moment of y for digitizer axes, (7) x coordinate of centroid, (8) y coordinate of centroid, (9) moment of area inertia of with respect to x axis through centroid, (10) moment of inertia of area with respect to y axis through centroid, (11) product inertia of area with respect to x and y axes through centroid, (12) polar moment of inertia of area around centroid, (13) radius of gyration about digitizer x axis, (14) radius of gyration about digitizer y-axis; and (15) variance in the x-direction.

Patch, R. W.↗

Information on the metric system and related fields

This document contains about 7,600 references on the metric system and conversion to the metric system. These references include all known documents on the metric system as of December 1975, the month of enactment of the Metric Conversion Act of 1975. This bibliography includes books, reports, articles, presentations, periodicals, legislation, motion pictures, TV series, film strips, slides, posters, wall charts, education and training courses, addresses for information, and sources for metric materials and services. A comprehensive index is provided.

Lange, E.↗

Synoptic analyses, 5-, 2-, and 0.4-millibar surfaces, July 1973 - June 1974

Satellite radiance measurements and data from meteorological rocketsondes were employed to analyze a series of high-altitude constant pressure charts. The methods of processing the various types of data and the analysis procedure used are described. Broad-scale analyses for the Northern Hemisphere 5-, 2-, and 0.4-mb surfaces are presented for each week of the period from September through April, and on a once-per-month basis for July, August, May, and June. A brief discussion of the variations of the temperature and height fields throughout the year is also given.

Source record↗

Development of Alabama Resources Information System (ARIS)

A formal, organized set of information concerning the development status of the Alabama Resources Information System (ARIS) as of September 1976 is provided. A series of computer source language programs, and flow charts related to each of the computer programs to provide greater ease in performing future change are presented. Listings of the variable names, and their meanings, used in the various source code programs, and copies of the various user manuals which were prepared through this time are given.

Herring, B. E.↗

LANDSAT-1 and LANDSAT-2 flight evaluation report, 23 April - 23 July 1976

LANDSAT 1 and 2 operations were described, giving detailed charts and tables of their performances since 1972. Orbital parameters, attitude control subsystem, telemetry subsystem, orbit adjust subsystem, and magnetic moment compensating assembly were some of the main parameters discussed.

Source record↗

Al-26: A galactic source of gamma ray line emission

It is shown that Al26 is a very good candidate for producing a detectable gamma-ray line, and that this line is not only intense but also very narrow. By examining the chart of nuclides for other radioactive isotopes which could produce hiterto unnoticed gamma-ray lines following nucleosynthesis, it is found that for mass numbers less than 60, the isotopes Na22, Al26, K40, Ar42, Ti44, Sc46, Mn54, Co56, Co57, Co58, Co60 and Fe60 are the only ones with sufficiently long half lives (70) days to produce gamma rays in optically thin regions.

Ramaty, R.↗

EVAL system concept definition. Partial spacelab payload, appendices

Tables and charts are presented for experiment schematics, mission opportunities, mission timelines, crew time line and power profile. The methodology being developed to evaluate cost effective vibroacoustic test plans for a representative EVAL shuttle spacelab payload is analyzed. Statistical decision theory is used to quantitatively evaluate seven alternate test plans which include component, subassembly, or payload testing and combinations of component assembly testing.

Source record↗

Reduction and analysis of data collected during the electromagnetic tornado experiment

Techniques for data processing and analysis are described to support tornado detection by analysis of radio frequency interference in various frequency bands, and sea state determination from short pulse radar measurements. Activities include: strip chart recording of tornado data; the development and implementation of computer programs for digitalization and analysis of the data; data reduction techniques for short pulse radar data, and the simulation of radar returns from the sea surface by computer models.

Davisson, L. D.↗

YF-16 flight flutter test procedures

The Random Decrement technique (Randomdec) was incorporated in procedures for flight testing of the YF-16 lightweight fighter prototype. Damping values obtained substantiate the adequacy of the flutter margin of safety. To confirm the structural modes which were being excited, a spectral analysis of each channel was performed using the AFFTC time/data 1923/50 time series analyzer. Inflight test procedure included the careful monitoring of strip charts, three axis pulses, rolls, and pullups.

Brignac, W. J.↗

LANDSAT menhaden and thread herring resources investigation, Gulf of Mexico

The author has identified the following significant results. The most significant achievement thus far includes the successful charting of high probability fishing areas from LANDSAT MSS data and the successful simulation of an operational satellite system to provide tactical information for the commercial harvest of menhaden.

Savastano, K.↗

The dynamics and optimal control of spinning spacecraft and movable telescoping appendages, part B: Effect of gravity-gradient torques on the dynamics of a spinning spacecraft with telescoping appendages

The effects of gravity gradient torques during boom deployment maneuvers of a spinning spacecraft are examined. Configurations where the booms extended only along the hub principal axes and where one or two booms are offset from the principal axes were considered. For the special case of symmetric deployment (principal axes booms) the stability boundaries are determined, and a stability chart is used to study the system behavior. Possible cases of instability during this type of maneuver are identified. In the second configuration an expression for gravity torque about the hub center of mass was developed. The nonlinear equations of motion are solved numerically, and the substantial influence of the gravity torque during asymmetric deployment maneuvers is indicated.

Bainum, P. M.↗

Definition and fabrication of an airborne scatterometer radar signal processor

A hardware/software system which incorporates a microprocessor design and software for the calculation of normalized radar cross section in real time was developed. Interface is provided to decommutate the NASA ADAS data stream for aircraft parameters used in processing and to provide output in the form of strip chart and pcm compatible data recording.

Source record↗

A preliminary training guide for utilizing high-altitude, color-infrared photography in compiling soil maps

Instruction for acquiring and analytically processing small-scale color-infrared photography to perform a soil resources inventory over forests of the southern U.S. is provided. Planning the project; acquiring aerial photography, materials, equipment and supplemental data; and preparing the photography for analysis are discussed. The procedures for preparing ancillary and primary component overlays are discussed. The use of correlation charts and dichotomous keys for mountain landforms, water regime, and vegetation is explained.

Weaver, J. E.↗

Spin tests of a low-wing monoplane to investigate scale effect in the model test range, May 1941

Concurrent tests were performed on a 1/16 and a 1/20 scale model (wing spans of 2.64 and 2.11 ft. respectively) of a modern low wing monoplane in the NACA 15 foot free-spinning wind tunnel. Results are presented in the form of charts that afford a direct comparison between the spins of the two models for a number of different conditions. Qualitatively, the same characteristic effects of control disposition, mass distribution, and dimensional modifications were indicated by both models. Quantitatively, the number of turns for recover and the steady spin parameters, with the exception of the inclination of the wing to the horizontal, were usually in good agreement.

Donlan, C. J.↗

The effect of cowling shape on the stability characteristics of an airplane, September 1942

Three widely different nose shapes were tested on a fuselage alone and on a complete model in the NACA stability tunnel to investigate the effect of cowling shape on stability characteristics. The results are presented in the form of charts which show the variation in the aerodynamic characteristics with the three nose shapes for the propeller-removed condition over a wide range of angles of attack and yaw. The results indicated that large changes in the cowling shape produced relatively small changes in the aerodynamic characteristics. The effects may be appreciable, however, in the case of an airplane that has marginal stability.

Donlan, C. J.↗

Interactive LORAN-C to geographic and geographic-to-LORAN-C computation

The LORAN program is stored in CMS disk files for use by Avionics Engineering Center terminal users. A CMS EXEC file named LORAN controls program operation. The user types LORAN and the program then prompts for data input and produces output on the terminal. The FORTRAN program refers to a disk file of LORAN master data giving station locations, coding delays, repetition rate and station pair identification letters. For Geographic-to-LORAN conversion, no iterative computations are required; the program is a straightforward coordinate conversion based upon the techniques described by the Navy. For LORAN-to-Geographic conversion, the original Navy program required a dead-reckoned position, near the actual unknown fix, to begin computations. No iteration was performed to obtain the LORAN fix, but internal program errors occurred at execution time if the dead-reckoned fix were displaced from the actual fix by more than a few minutes of latitude or longitude. In order to enhance usefulness of the program for the terminal user, an iterative routine was added which allows a single dead-reckoned position to be entered from the master data file for each LORAN chain. The results compare exactly with the LORAN-C navigation chart, and provide adequate benchmark data for general aviation flight planning and data analysis.

Piecuch, L. M.↗