Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Anode material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Simulation of mixed-host emitting layer based organic light emitting diodes

‘SimOLED’ simulator is used in this work to investigate the efficiency of the mixed-host organic light emitting devices (MH-OLEDs). Tris-(8-hydroxyquinoline) aluminum(3) (Alq{sub 3}) and N,N-diphenyl-N,N-Bis(3-methylphenyl)-1,1-diphenyl-4,4-diamine (TPD) are used as the electron transport layer (ETL) material and hole transport layer (HTL) material respectively, and the indium-doped tin oxide (ITO) and aluminum (Al) as anode and cathode. Three MH-OLEDs, A, B and C with the same structure of ITO / HTM (15 nm) / Mixed host (70 nm) / ETM (10 nm) /Al, are stimulated with ratios TPD:Alq{sub 3} of 3:5, 5:5, and 5:3 respectively. The Poole-Frenkel model for electron and hole mobilities is employed to compute the current density-applied voltage-luminance characteristics, distribution of the electric field, carrier concentrations and recombination rate.

36 MATERIALS SCIENCE↗

ZnNi x Mn x Co 2–2 x O 4 Spinel as a High‐Voltage and High‐Capacity Cathode Material for Nonaqueous Zn‐Ion Batteries

Abstract Nonaqueous Zn‐ion batteries are regarded as one alternative for Li‐ion batteries. Such batteries not only afford attractive attributes of cost, but also embody the advantages of the high‐specific capacities of Zn anodes, as well as the wide potential window of nonaqueous electrolytes. To fully exploit these advantages, improved cathode materials are highly desired. In this manuscript, a new series of spinels, ZnNi x Mn x Co 2–2 x O 4 , are reported as cathode materials for nonaqueous Zn‐ion batteries. Full cells constructed using this new spinel ( x = 1/2) as a cathode paired with a metal anode showed capacities over 200 cycles of 174 mAh g −1 and an open circuit potential of 2.05 V. The battery exhibits an energy density of 305 Wh kg −1 , which is the highest energy density yet reported for a Zn‐intercalation cathode. The data show that the Zn 2+ ions reversibly intercalate into the spinel structure during the charge/discharge processes, a compositional transformation directly correlated with a multiply reversible conversion between Co 4+ /Co 3+ , Ni 4+ /Ni 3+ /Ni 2+ , and Mn 4+ /Mn 3+ oxidation states within the lattice. The data suggest that Mn, Ni cosubstitution for Co in ZnCo 2 O 4 is an efficient method to facilitate Zn‐deintercalation and enhance discharge capacity, which may provide some guidelines for designing more attractive multivalent cathodes materials.

Pan, Chengsi↗

Micro cavity fission chamber radiation detection system

A radiation detector to monitor the neutron flux of a nuclear reactor or other high-radiation environment, that can withstand the high temperatures and radiation fields of such environment, is provided. A small dielectric substrate with a low neutron-activation cross section is provided. The substrate is coated with a neutron conversion material, such as uranium oxide or thorium oxide. One or more substrates form a micro-sized detection cavity that is filled with a detection gas. A voltage is provided across anode and cathode wires in the detection cavity. A neutron absorbed in the conversion material may release reaction products into the gas, causing ionization of the gas which then produces a current or voltage signal. The small detector volume minimizes energy deposition into the detection gas by competing particles such as gamma rays, fast electrons, and beta particles, and therefore minimizes false counts while retaining large signals from neutron interactions.

McGregor, Douglas S.↗

Metal cyanometallate electrode with shield structure

A mechanism is presented for shielding a cathode in a metal cyanometallate battery. A battery is provided with an anode, a cathode, an electrolyte, and an ion-permeable membrane separating the anode from the cathode. The cathode is made up of a plurality of metal cyanometallate layers overlying the current collector. At least one of the metal cyanometallate layers is an active layer formed from an active material AXM1YM2Z(CN)N·MH2O, where “A” is an alkali metal, alkaline earth metal, or combination thereof. At least one of the metal cyanometallate layers is a shield layer comprising less than 50 percent by weight (wt %) active material. In response to applying an external voltage potential between the cathode and the anode, the method charges the battery. Upon discharge, the shield layer blocks metal particles from contacting active layers. Simultaneously, the shield layer transports metal ions from the electrolyte to the active layers.

25 ENERGY STORAGE↗

Role of anisotropy in determining stability of electrodeposition at solid-solid interfaces

Here, we investigate the stability of electrodeposition at solid-solid interfaces for materials exhibiting an anisotropic mechanical response. The stability of electrodeposition or resistance to the formation of dendrites is studied within a linear stability analysis. The deformation and stress equations are solved using the Stroh formalism and faithfully recover the boundary conditions at the interface. The stability parameter is used to quantify the stability of different solid-solid interfaces incorporating the full anisotropy of the elastic tensor of the two materials. Our results show a high degree of variability in the stability parameter depending on the crystallographic orientation of the solids in contact, and point to opportunities for exploiting this effect in developing Li metal anodes.

25 ENERGY STORAGE↗

A Lithium-Sulfur Cell Based on Reversible Lithium Deposition from a Li 2 S Cathode Host onto a Hostless-Anode Substrate

Here, the development of lithium–sulfur batteries necessitates a thorough understanding of the lithium-deposition process. A novel full-cell configuration comprising an Li 2 S cathode and a bare copper foil on the anode side is presented here. The absence of excess lithium allows for the realization of a truly lithium-limited Li–S battery, which operates by reversible plating and stripping of lithium on the hostless-anode substrate (copper foil). Its performance is closely tied to the efficiency of lithium deposition, generating valuable insights on the role and dynamic behavior of lithium anode. The Li 2 S full cell shows reasonable capacity retention with a Coulombic efficiency of 96% over 100 cycles, which is a tremendous improvement over that of a similar lithium-plating-based full cell with LiFePO 4 cathodes. The exceptional robustness of the Li 2 S system is attributed to an intrinsic stabilization of the lithium-deposition process, which is mediated by polysulfide intermediates that form protective Li 2 S and Li 2 S 2 regions on the deposited lithium. Combined with the large improvements in energy density and safety by the elimination of a metallic lithium anode, the stability and electrochemical performance of the lithium-plating-based Li 2 S full cell establish it as an important trajectory for Li–S battery research, focusing on practical realization of reversible lithium anodes.

25 ENERGY STORAGE↗

An investigation into the cumulative breakdown process of polymethylmethacrylate in quasi-uniform electric field under nanosecond pulses

A group of complete images on the discharge channel developed in PMMA in quasi-uniform electric field under nanosecond pulses are observed with an on-line transmission microscope. The characteristics of the cumulative breakdown process are also generalized, which include initiating from the vicinity of the cathode, developing to the anode with a branch-like shape, and taking on a wormhole appearance when final breakdown occurs. The concluded characteristics are explained by referring to the conceptions of “low density domain” and “free radical” and considering the initial discharge channel as a virtual needle. The characteristics are helpful for designers to enhance the lifetime of insulators employed on a nanosecond time scale.

36 MATERIALS SCIENCE↗

Polyethylene Glycol Surface Modification and Polythiophene Side-Chain Chemistry: A Combined Strategy toward High-Capacity Lithium-Ion Battery Anodes

In the development of high-capacity lithium-ion batteries (LIBs), the combined optimization of active material interfaces and polymer binder chemistry plays a critical role in improving electrode performance and longevity. This work explores a dual design strategy incorporating polyethylene glycol (PEG) surface modification and carboxylated polythiophene side-chain tailoring to enhance the electrochemical behavior of magnetite (Fe 3 O 4 )-based anodes. PEG is employed to improve interfacial stability, while carboxylated polythiophene binders with varying alkyl side-chain lengths─poly[3-(potassium-4-butanoate)thiophene-2,5-diyl] (P3KBT), poly[3-(potassium-5-pentanoate)thiophene-2,5-diyl] (P3KPT), and poly[3-(potassium-6-hexanoate)thiophene-2,5-diyl] (P3KHT)─are used to modulate molecular interactions and ion transport. Among these three analogs, the PEG–Fe 3 O 4 –P3KHT electrode exhibits superior ion-transfer kinetics, the highest capacity retention, and the lowest charge-transfer resistance after extended cycling. Compared to their non-PEG analogs, PEG-coated electrodes demonstrate enhanced structural integrity and electrochemical behavior, emphasizing the synergistic effects of surface modification and side-chain chemistry. These findings highlight the importance of interfacial interactions and molecular design in achieving robust and high-performance composite anodes for next-generation LIBs.

Fe3O4↗

Effect of Lithium on the Discharge and Corrosion Behavior of Mg-3 wt.% Al Alloy as the Anode for Seawater Activated Battery

The discharge and corrosion behavior of Mg-3 wt.% Al alloys added with different contents of lithium in 3.5 wt.% NaCl aqueous solution is studied by electrochemical methods and microstructure characterization. The results indicate that adding 4 wt.% lithium severely promotes the self-corrosion and the addition of 12 wt.% lithium is not valuable to the spalling of discharge products. In contrast, doping Mg-3 wt.% Al with 8 wt.% lithium negatively shifts the discharge potentials and inhibits the self-discharge, attributed to the dual-phase structure of α-Mg plus β-Li that removes the discharge products and favors the uniform dissolution in the course of discharge. Moreover, the multi-pass rolling with 40% reduction could tailor the microstructure of Mg-3 wt.% Al-8 wt.% Li alloy and further enhance its discharge activity, even though the corrosion resistance is slightly reduced. This means that the rolled Mg-3 wt.% Al-8 wt.% Li sheet is suitable to serve as the anode for seawater activated battery.

36 MATERIALS SCIENCE↗

A lightweight and metal-free current collector for battery anode applications

The requirement for high energy density batteries is driving the development of high-capacity electrode materials while reducing the amount of inactive battery components such as separators, binders, and current collectors. Though current collectors are an inactive component, they are still required for successful working of a battery cell. Conventional current collectors include aluminum foil for cathode and copper foil for anode. Copper foil is quite heavy (8.7 mg/cm 2 ) for 10μm thickness. Therefore, there is a need for a lightweight current collector for anode applications. In this work, a metal-free current collector comprised of aligned carbon fiber (CFs) layer filled with carbon nanotubes (CNTs) mixed in polymer (P) is developed to be used as a current collector for anodes. Further, anodes coated on the CF-CNT-P showed lower charge transfer resistance and improved rate capability compared with the anodes fabricated on conventional copper foil-based current collectors. The CF-CNT-P are lighter (≈1.5 mg/cm 2 ) than the commonly used copper foil (8.7 mg/cm 2 ), which will increase the gravimetric energy density.

25 ENERGY STORAGE↗

Ce nanoparticles and sol-gel hybrid organic-inorganic coatings maximize corrosion protection in the anodized AA2024-T3

Herein we demonstrate that the corrosion resistance of the AA2024-T3 alloy can be maximized with the application of top protective sol-gel hybrid organic-inorganic coatings. Samples combining Ce nanoparticles within the pores of the anodic layer with the top sol-gel coatings were observed to outperform samples featuring only the coating. This research unravels the self-healing capability against corrosion of the sol-gel coating when Ce nanoparticles are present, as well as a good coverage of defective regions within the oxide by the hybrid layer. This research opens a paradigm aiming at maximizing the corrosion resistance for non-ferrous anodized alloys.

36 MATERIALS SCIENCE↗

Ultra-fast and Thick Boriding of Geothermal Casing to Enhance Reliability

Harnessing the heat that is continuously generated underneath the Earth’s crust (geothermal) is a clean and renewable source of energy. Geothermal energy can be used to heat and cool buildings, including greenhouses, and to generate electrical power. Compared to other renewable energy sources such as solar and wind, geothermal energy is more reliable because it is available all the time and versatile in its many forms of application and deployment. Nonetheless, the deployment and extensive use of geothermal energy still lags behind other renewable sources due to some technical, but mainly economic challenges. Upfront costs of geothermal power well development are relatively high. Some of this high cost is attributed to the use of expensive construction materials to ensure adequate performance during operation. For example, Inconel 625, super duplex 2507, and titanium alloy materials are used in downhole casings, piping, and other components exposed to brine solution to withstand harsh operating environments (high temperature and corrosive environments). Relatively low-cost carbon steel can be used in many of these components in geothermal power plants; however, they are susceptible to excessive corrosion, thereby limiting their useful lifespan. Ultra-fast boriding (UFB) surface treatment of carbon steel may drastically increase its corrosion resistance thereby providing a cost-effective material solution in geothermal applications. Scientists at Argonne National Laboratory (ANL) recently developed a technique to accelerate the boriding process using a high-temperature electrochemical process to produce relatively thick boride layers on various metal and alloy materials in minutes rather than the several hours it takes through the typical pack boriding process; hence, the process is designated UFB. The process uses molten borax salt at 900– 1000°C in an electrochemical cell in which the material to be borided is the cathode and a graphite plate is the anode. Continuous and durable boride layers with thicknesses of 100–300 µm have been produced on a variety of metals and alloys in one hour. Such a surface layer can indeed be a cost-effective pathway to prevent corrosion of casing materials in contact with the chemically aggressive and corrosive geothermal brine fluids.

15 GEOTHERMAL ENERGY↗

Hybrid Lithium-Sulfur Batteries with an Advanced Gel Cathode and Stabilized Lithium-Metal Anode

The insulating nature of sulfur, polysulfide shuttle effect, and lithium metal deterioration cause a decrease in practical energy density and fast capacity fade in lithium-sulfur batteries. Here, we present an integrated strategy for the development of hybrid Li-S batteries based on a gel sulfur cathode, a solid electrolyte, and a protective anolyte composed of highly-concentrated salt electrolyte containing mixed additives. The dense solid electrolyte completely blocks polysulfide diffusion, and also makes it possible to investigate the cathode and anode independently. This gel cathode effectively traps the polysulfide active material while maintaining a low electrolyte to sulfur ratio (E/S) of 5.2 mL/g. The anolyte effectively protects the Li metal and suppresses the consumption of liquid electrolyte, enabling stable long-term cycling for over 700 hours in Li symmetric cells. This advanced design can simultaneously suppress the polysulfide shuttle, protect Li metal, and reduce the liquid electrolyte usage. The assembled hybrid batteries exhibit remarkably stable cycling performance over 300 cycles with high capacity. Finally, surface-sensitive techniques were carried out to directly visualize and to probe the interphase formed on the surface of the LAGP pellet, which may help stabilize the solid-liquid interface.

25 ENERGY STORAGE↗

Electron and ion transport equations in computational weakly-ionized plasmadynamics

A new set of ion and electron transport equations is proposed to simulate steady or unsteady quasi-neutral or non-neutral multicomponent weakly-ionized plasmas through the drift–diffusion approximation. The proposed set of equations is advantaged over the conventional one by being considerably less stiff in quasi-neutral regions because it can be integrated in conjunction with a potential equation based on Ohm's law rather than Gauss's law. The present approach is advantaged over previous attempts at recasting the system by being applicable to plasmas with several types of positive ions and negative ions and by not requiring changes to the boundary conditions. Several test cases of plasmas enclosed by dielectrics and of glow discharges between electrodes show that the proposed equations yield the same solution as the standard equations but require 10 to 100 times fewer iterations to reach convergence whenever a quasi-neutral region forms. Further, several grid convergence studies indicate that the present approach exhibits a higher resolution (and hence requires fewer nodes to reach a given level of accuracy) when ambipolar diffusion is present. Because the proposed equations are not intrinsically linked to specific discretization or integration schemes and exhibit substantial advantages with no apparent disadvantage, they are generally recommended as a substitute to the fluid models in which the electric field is obtained from Gauss's law as long as the plasma remains weakly-ionized and unmagnetized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Obtaining Mixed Ionic/Electronic Conductivity in Perovskite Oxides in a Reducing Environment: A Computational Prediction for Doped SrTiO3

The electronic conductivity and thermodynamic stability of mixed p- and n-doped SrTiO3 perovskites have been investigated under anodic solid oxide fuel cell conditions using density functional theory (DFT). In particular, constrained ab initio thermodynamic calculations have been performed to evaluate the phase stability of various Ga- and La-doped SrTiO3 at synthesized and anodic SOFC conditions. The density of states (DOS) of these materials was analyzed to determine the number of charge carriers and the degree of electronic conductivity. We find that a mixed ionic/electronic conductor can be obtained when doping SrTiO3 perovskite oxide with both p-type and n-type dopants. Calculations show that 10% Ga- and 20% La-doped SrTiO3 exhibit mixed ionic/electronic conductivity at high temperature and low oxygen partial pressure whereas doping with higher concentrations of Ga, e.g., 20%, diminishes the electronic conductivity of the material. Furthermore, changing the n-dopant from La (A-site) to Nb (B-site) does not significantly affect the reducibility and number of charge carriers in p- and n-doped SrTiO3. However, a higher degree of oxygen vacancy clustering is observed for the La-doped material which reduces the oxygen ion diffusion rate and traps electrons. Nevertheless, our findings suggest that independent of doping site, mixed ionic/ electronic conductivity can be obtained in SrTiO3 perovskite oxides under reducing conditions and high temperatures when using a mixed p- and n-type doping strategy that uses a p-dopant concentration smaller than the n-dopant concentration.

Environmental Molecular Sciences Laboratory↗

Encapsulation of Metallic Na in an Electrically Conductive Host with Porous Channels as a Highly Stable Na Metal Anode

Room-temperature Na ion batteries (NIBs) have attracted great attention because of the widely available, abundant sodium resources and potentially low cost. Currently, the challenge of the NIB development is due primarily to the lack of a high-performance anode, while the Na metal anode holds great promise considering its highest specific capacity of 1165 mA h/g and lowest anodic potential. However, an uneven deposit, relatively infinite volume change, and dendritic growth upon plating/stripping cycles cause a low Coulombic efficiency, poor cycling performance, and severe safety concerns. In this study, a stable Na carbonized wood (Na–wood) composite anode was fabricated via a rapid melt infusion (about 5 s) into channels of carbonized wood by capillary action. The channels function as a high-surface-area, conductive, mechanically stable skeleton, which lowers the effective current density, ensures a uniform Na nucleation, and restricts the volume change over cycles. As a result, the Na–wood composite anode exhibited flat plating/stripping profiles with smaller overpotentials and stable cycling performance over 500 h at 1.0 mA/cm 2 in a common carbonate electrolyte system. Finally, in sharp comparison, the planar Na metal electrode showed a much shorter cycle life of 100 h under the same test conditions.

09 BIOMASS FUELS↗

Hierarchical porous silicon structures with extraordinary mechanical strength as high-performance lithium-ion battery anodes

Abstract Porous structured silicon has been regarded as a promising candidate to overcome pulverization of silicon-based anodes. However, poor mechanical strength of these porous particles has limited their volumetric energy density towards practical applications. Here we design and synthesize hierarchical carbon-nanotube@silicon@carbon microspheres with both high porosity and extraordinary mechanical strength (>200 MPa) and a low apparent particle expansion of ~40% upon full lithiation. The composite electrodes of carbon-nanotube@silicon@carbon-graphite with a practical loading (3 mAh cm −2 ) deliver ~750 mAh g −1 specific capacity, <20% initial swelling at 100% state-of-charge, and ~92% capacity retention over 500 cycles. Calendered electrodes achieve ~980 mAh cm −3 volumetric capacity density and <50% end-of-life swell after 120 cycles. Full cells with LiNi 1/3 Mn 1/3 Co 1/3 O 2 cathodes demonstrate >92% capacity retention over 500 cycles. This work is a leap in silicon anode development and provides insights into the design of electrode materials for other batteries.

25 ENERGY STORAGE↗