Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

A synergistic approach to improve the cellulose nanofibril dispersion in poly(lactic acid) composites as feedstocks for extrusion-based additive manufacturing

Hybrid fiber-reinforced polymer composites (HFRPs) are multifunctional materials that bear more than one characteristic benefit. In this study, hybrid cellulose fibers, e.g., pulp fiber (PF) and cellulose nanofibril (CNF), were used for reinforcing poly(lactic acid) (PLA). A synergistic approach was applied to disperse CNF. The low-surface-tension solvent (ethanol), together with PF templating, assisted the dispersion of CNF in PLA. The HFRP achieved a higher tensile strength (∼70 MPa, 29% increase from PLA) and modulus (∼7 GPa, 46% increase from PLA), as well as a higher heat deflection temperature (∼60℃, 6℃ increase compared to neat PLA), compared to single-reinforcement FRPs. Additionally, the formulation was demonstrated to be potentially suitable for large-scale additive manufacturing.

Bista, Bivek [University of Maine]↗

An additively manufactured AlCuMnZr alloy microstructure and tensile mechanical properties

In this study, selective laser melting (SLM) was used to fabricate an AlCuMnZr alloy. The microstructural features that resulted from additive manufacturing (AM) were significantly refined compared to the corresponding cast alloy features. A combination of fine equiaxed and columnar grains along with in-situ formation of θ' precipitates during AM leads to enhanced yield strength (up to 300°C) in the as-fabricated AM alloy. The refinement of brittle intermetallics and a bimodal grain size distribution leads to improved tensile elongation in the AM alloy. The results illustrate the microstructural advantages that can result from additive processing over conventionally processed microstructures.

36 MATERIALS SCIENCE↗

First measurement of the cross section for top quark pair production with additional charm jets using dileptonic final states in pp collisions at $\sqrt{s}$= 13 TeV

The first measurement of the inclusive cross section for top quark pairs ($t\bar{t}$) produced in association with two additional charm jets is presented. The analysis uses the dileptonic final states of $t\bar{t}$ events produced in proton-proton collisions at a centre-of-mass energy of 13 TeV. The data correspond to an integrated luminosity of 41.5 fb -1 recorded by the CMS experiment at the LHC. A new charm jet identification algorithm provides input to a neural network that is trained to distinguish among $t\bar{t}$ events with two additional charm ($t\bar{t}c\bar{c}$), bottom ($t\bar{t}b\bar{b}$), and light-flavour or gluon ($t\bar{t}LL$) jets. By means of a template fitting procedure, the inclusive $t\bar{t}c\bar{c}$, $t\bar{t}b\bar{b}$, and $t\bar{t}LL$ cross sections are simultaneously measured, together with their ratios to the inclusive $t\bar{t}$ + two jets cross section. This provides measurements of the $t\bar{t}c\bar{c}$ and $t\bar{t}b\bar{b}$ cross sections of 10.1 ± 1.2 (stat) ± 1.4 (syst) pb and 4.54 ± 0.35 (stat) ± 0.56 (syst) pb, respectively, in the full phase space. The results are compared and found to be consistent with predictions from two different matrix element generators with next-to-leading order accuracy in quantum chromodynamics, interfaced with a parton shower simulation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Insights on keto-hydroperoxide formation from O 2 addition to the beta-tetrahydrofuran radical

Cyclic ethers provide an interesting case study of low-temperature oxidation chemistry, especially in relevance to biofuels. A recent experimental study revealed new questions regarding the low-temperature oxidation mechanism of tetrahydrofuran (THF) concerning the formation of keto-hydroperoxides. In particular, keto-hydroperoxides originating from the THF-β radical were not captured accurately by current literature models, motivating this work to calculate the energetics of the first and second O 2 -addition pathways for THF radicals. Electronic structure calculations at the CCSD(T)/cc-pV∞Z//M06-2X/cc-pVTZ level of theory were used to generate potential energy surfaces for the α-C and β-C THF radicals and subsequent pathways to the formation of the keto-hydroperoxide isomers. These are the first theoretical calculations of the second O 2 -addition radical pathways for the THF-β radical. Results from the theorical work provided further insight into the low-temperature oxidation of THF. This included identifying the pathways most likely to form the keto-hydroperoxide isomers observed in prior experimental work; and detecting that the shortcomings in prior models are likely due to uncertainties in R + THF abstraction reaction rates. Here, these conclusions will motivate future work for accurate THF kinetic model development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bay capping via acetylene addition to polycyclic aromatic hydrocarbons: Mechanism and kinetics

The bay-capping mechanism on PAH armchair edges and the kinetics of acetylene addition to 6–6–5 and 5–6–5 bays have been explored by ab initio/RRKM-ME calculations. The bays on the edges were modeled by C 21 H 11 and C 20 H 9 radicals produced by H abstractions from 7H-benzo[c]cyclopenta[e]pyrene and dicyclopenta[cf]pyrene. The C 20 H 9 + C 2 H 2 reaction is shown to have a low entrance barrier and to rapidly form the capped product, indaceno[2,1,8,7-cdefg]pyrene, along with ethynyl substituted dicyclopenta[cf]pyrene at temperatures above 1400 K. The reactivity of C 21 H 11 is shown to be governed by the location of the unpaired electron; the π radical R1 formed by H abstraction from the CH 2 group in 7H-benzo[c]cyclopenta[e]pyrene reacts with C 2 H 2 very slowly owing to a high entrance barrier, with the bay-capping rate constant approaching 10 -16 cm 3 molecule -1 s -1 only at temperatures above 2000K. Further, this result reaffirms that the growth of π aryl radicals via acetylene addition is inefficient and reflects the generally low reactivity of such radicals where the spin density is highly delocalized over the entire polyaromatic system. Alternatively, the σ C 21 H 11 radical R2 produced by H abstraction from the five-membered ring at the bay rapidly reacts with C 2 H 2 forming the bay-capped product, with the rate constant on the order of 10 -12 cm 3 molecule -1 s -1 at T≥1500K. Rate constants for the capping reactions at the 6–6–5 and 5–6–5 bays are compared with those at the 6–0–6, 6–6–6, and 6–5–6 bays. The site-specific bay-capping rate constants have been utilized in kMC simulations of the PAH growth and the results showed measurable differences when the 6–6–5 and 5–6–5 bay-capping reactions are taken into account, including an increase of the growth rate and the formation of closed-shell PAH and a rise of the number of embedded five-membered rings accompanied with a slight decrease of their overall amount.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stimulation of anaerobic organic matter decomposition by subsurface organic N addition in tundra soils

We present that increasing nitrogen (N) availability in Arctic soils could stimulate the growth of both plants and microorganisms by relieving the constraints of nutrient limitation. It was hypothesized that organic N addition to anoxic tundra soil would increase CH 4 production by stimulating the fermentation of labile substrates, which is considered the rate-limiting step in anaerobic C mineralization. We tested this hypothesis through both field and lab-based experiments. In the field experiment, we injected a solution of 13 C- and 15 N-labeled glutamate 35 cm belowground at a site near Nome on the Seward Peninsula, Alaska, and observed the resulting changes in porewater geochemistry and dissolved greenhouse gas concentrations. The concentration of free glutamate declined rapidly within hours of injection, and the 15 N label was recovered almost exclusively as dissolved organic N within 62 h. These results indicate rapid microbial assimilation of the added N and transformation into novel organic compounds. We observed increasing concentrations of dissolved CH 4 and Fe(II), indicating rapid stimulation of methanogenesis and Fe(III) reduction. Low molecular weight organic acids such as acetate and propionate accumulated despite increasing consumption through anaerobic C mineralization. A laboratory soil column flow experiment using active layer soil collected from the same site further supported these findings. Glutamate recovery was low compared to a conservative bromide tracer, but concentrations of NO 3 - and NH 4 + remained low, consistent with microbial uptake of the added N. Similar to the field experiment, we observed both increasing Fe(II) and organic acid concentrations. Lastly, together, these results support our hypothesis of increased fermentation in response to organic N addition and suggest that increasing N availability could accelerate CH 4 production in tundra soils.

54 ENVIRONMENTAL SCIENCES↗

Ionic liquids as oil additives for lubricating oxygen-diffusion case-hardened titanium

This study attempts to use ionic liquids (ILs) as oil additives to lubricate oxygen-diffusion (OD) case-hardened titanium for improved friction and wear behavior. Four oil-soluble ILs were used as additives in a base oil for boundary lubrication of an OD-treated Ti-6Al-4V surface sliding against a bearing steel ball. The ILs improved the friction behavior to various extents and the two phosphate ILs clearly outperformed the conventional ZDDP. Unlike ZDDP that adversely caused a higher material loss, ILs exhibited excellent wear protection suggesting good material-chemical compatibility. Particularly, the carboxylate IL protected the OD-Ti surface from any measurable wear. As a result, the morphology and chemical composition of the worn surfaces and tribofilms were examined to gain insights of the anti-wear mechanism.

36 MATERIALS SCIENCE↗

Decreased PCDD/F formation when co-firing a waste fuel and biomass in a CFB boiler by addition of sulphates or municipal sewage sludge

Highlights: • Two strategies to reduce PCDD/F formation when co-firing solid recovered fuel (SRF) and biomass. • They were co-combustion with municipal sewage sludge (MSS) and addition of ammonium sulphate. • PCDD/Fs were significantly reduced for a biomass rich in chlorine when adding ammonium sulphate. • MSS had a suppressing effect on PCDD/F formation during co-combustion with SRF. • A link is presented between gaseous alkali chlorides, chlorine in deposits and PCDD/F formation. - Abstract: Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are formed during waste incineration and in waste-to-energy boilers. Incomplete combustion, too short residence times at low combustion temperatures (<700 °C), incineration of electronic waste and plastic waste containing chlorine are all factors influencing the formation of PCDD/Fs in boilers. The impact of chlorine and catalysing metals (such as copper and iron) in the fuel on PCDD/F formation was studied in a 12 MW{sub th} circulating fluidised bed (CFB) boiler. The PCDD/F concentrations in the raw gas after the convection pass of the boiler and in the fly ashes were compared. The fuel types were a so-called clean biomass with low content of chlorine, biomass with enhanced content of chlorine from supply of PVC, and solid recovered fuel (SRF) which is a waste fuel containing higher concentrations of both chlorine, and catalysing metals. The PCDD/F formation increased for the biomass with enhanced chlorine content and it was significantly reduced in the raw gas as well as in the fly ashes by injection of ammonium sulphate. A link, the alkali chloride track, is demonstrated between the level of alkali chlorides in the gas phase, the chlorine content in the deposits in the convection pass and finally the PCDD/F formation. The formation of PCDD/Fs was also significantly reduced during co-combustion of SRF with municipal sewage sludge (MSS) compared to when SRF was fired without MSS as additional fuel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Utilizing a Dynamic Segmentation Convolutional Neural Network for Microstructure Analysis of Additively Manufactured Superalloy 718

Additive manufacturing (AM) is revolutionizing almost all industries through the production of intricate geometries previously prohibited by cost or machinability. Ni-based superalloys form a primary alloy class for high temperature applications in the petrochemical, aerospace, and nuclear industries because of their intrinsic resistance to creep and the ability to heat treat the superalloy for high strength. Despite these attractive properties, the extreme work hardening of Ni-based superalloys makes traditional manufacturing of complex shapes difficult and thus, these alloys are an attractive target for AM. Superalloy 718 was chosen as an example superalloy because of the wide variety of precipitates that can form within its composition space from the repetitive heating and cooling cycles of the AM process. The precipitates and other microstructure features, such as grain boundaries and dislocations, will dictate the mechanical properties and thus, there is an extensive challenge to characterize the size, number density, composition, and volume fraction of each microstructural feature from AM fabrication using analytical electron microscopy. This work focused on the application of a pixel-wise classification machine learning (ML) model called a dynamic segmentation convolutional neural network (DSCNN) to identify the microstructural features of an as-fabricated additively manufactured superalloy 718.

Taller, Stephen↗

Fluoroethylene Carbonate and Vinylene Carbonate Reduction: Understanding Lithium-Ion Battery Electrolyte Additives and Solid Electrolyte Interphase Formation

In this work, we have synthesized the products of fluoroethylene carbonate (FEC) and vinylene carbonate (VC) via lithium naphthalenide reduction. By analyzing the resulting solid precipitates and gas evolution, our results confirm that both FEC and VC decomposition products include HCO 2 Li, Li 2 C 2 O 4 , Li 2 CO 3 , and polymerized VC. For FEC, our experimental data supports a reduction mechanism where FEC reduces to form VC and LiF, followed by subsequent VC reduction. In the FEC reduction product, HCO 2 Li, Li 2 C 2 O 4 , and Li 2 CO 3 were found in smaller quantities than in the VC reduction product, with no additional fluorine environments being detected by solid-state nuclear magnetic resonance or X-ray photoelectron spectroscopy analysis. With these additives being practically used in higher (FEC) and lower (VC) concentrations in the base electrolytes of lithium-ion batteries, our results suggest that the different relative ratios of the inorganic and organic reduction products formed by their decomposition may be relevant to the chemical composition and morphology of the solid electrolyte interphase formed in their presence.

36 MATERIALS SCIENCE↗

GeI 2 Additive for High Optoelectronic Quality CsPbI 3 Quantum Dots and Their Application in Photovoltaic Devices

Trioctylphosphine (TOP)-based syntheses of CsPbI 3 perovskite quantum dots (QDs) yield unprecedented high photoluminescence quantum yield (PL QY), lower Stokes shifts, and longer carrier lifetimes due to their enhanced crystallinity. This synthetic route relies on a heavily Pb-rich condition or a large Pb:Cs molar ratio in precursor solution to produce QDs with appropriate stoichiometry as well as to guarantee a good colloidal stability. The high Pb condition is achieved by a high concentration of PbI 2 prepared in TOP. Here we find such Pb-rich strategies can be avoided by providing additional iodine ions using other metal halide salts. In particular GeI 2 , which contrary to PbI 2 , readily dissolves in TOP. CsPbI 3 QDs prepared using PbI 2 /GeI 2 combination show near-unity PL QY and improved chemical stability compared to the previous synthetic route. Furthermore, we find no sign of Ge incorporation in the QDs (compositionally or energetically). The ensuing QD solar cells deliver power conversion efficiency of 12.15% and retain 85% of its peak performance after storage over 90 days. The PbI 2 /GeI 2 dual-source iodine synthetic approach presented here represents a more rational and robust route to high-quality CsPbI 3 QDs. to guarantee a good colloidal stability. The high Pb condition is achieved by a high concentration of PbI2 prepared in TOP. Here we find such Pb-rich strategies can be avoided by providing additional iodine ions using other metal halide salts. In particular GeI 2 , which contrary to PbI 2 , readily dissolves in TOP. CsPbI 3 QDs prepared using PbI 2 /GeI 2 combination show near-unity PL QY and improved chemical stability compared to the previous synthetic route. Furthermore, we find no sign of Ge incorporation in the QDs (compositionally or energetically). The ensuing QD solar cells deliver power conversion efficiency of 12.15% and retain 85% of its peak performance after storage over 90 days. The PbI 2 /GeI 2 dual-source iodine synthetic approach presented here represents a more rational and robust route to high-quality CsPbI 3 QDs.

14 SOLAR ENERGY↗

ortho -Fluoro or ortho Effect? Oxidative Addition of Zerovalent Nickel into the C–CN Bond of Substituted Benzonitriles

Substitution effects on the oxidative addition of [Ni(dmpe)] to the C—CN bond of CF 3 and CH 3 substituted benzonitriles was studied by DFT and compared to their F analogs. C—CN oxidative addition products were stabilized slightly more by the first o-CF 3 group (-7.4 kcal/mol) compared to F groups (-6.6 kcal/mol per o-F), but due to steric crowding the second o-CF 3 group did not show considerably more stabilization (-0.8 kcal/mol). CH 3 groups led to destabilization.

02 PETROLEUM↗

Formation of 1 H -Phenalene (C 13 H 10 ) in the Taurus Molecular Cloud via Methylidyne Addition-Cyclization-Aromatization (MACA)

The formation of 1H-phenalene (C 13 H 10 ) in cold molecular clouds, such as the Taurus Molecular Cloud-1 (TMC-1), presents a significant challenge to traditional astrochemical models, which predominantly suggest high-temperature pathways for polycyclic aromatic hydrocarbon (PAH) formation. In this study, we explore computationally the Methylidyne Addition-Cyclization-Aromatization (MACA) mechanism as a viable, barrierless pathway for phenalene synthesis under low-temperature conditions. Through electronic structure calculations and Rice–Ramsperger–Kassel–Marcus (RRKM) statistical methods, we demonstrate that the reaction of 1-vinylnaphthalene (C 10 H 7 C 2 H 3 ) with the methylidyne radical (CH) leads to the formation of 1H-phenalene via a bimolecular reaction, a process that is exoergic and without entrance barrier. The MACA mechanism facilitates the growth of the aromatic carbon backbone via a [5 + 1] ring annulation, providing a new insight into PAH formation in cold molecular clouds. Notably, the MACA mechanism has previously been shown to form indene (C9H8), which was detected in TMC-1 as well, via a [4 + 1] annulation, demonstrating its potential to produce a variety of complex PAHs by addition of a five- and six-membered ring to a benzene moiety via [4 + 1] and [5 + 1] annulation, respectively. As a result, this work highlights the importance of barrierless, exoergic reactions involving MACA in the synthesis of complex aromatic molecules in space, expanding our physicochemical understanding of carbon-rich chemistry in cold molecular clouds.

Aromatic compounds↗

Reversible Olefin Addition to Extended Lattices of a Nickel–Selenium Framework

We performed density functional theory computations to study the structural and electronic properties as the basis of ethylene addition activity for [Ni(XC)4]n (X = Se, S)-extended lattices. We demonstrated that the mechanism of ethylene cycloaddition to a periodic [Ni(SeC)4]n two-dimensional (2D) network is analogous to that previously described for [Ni(SC)4]n 2D sheets and similar to the metal bis(dithiolene) molecular complexes [M(S2C2R2)2] (M = Ni, Pd, Pt, Co, Cu). These nanosheet materials avoid decomposition upon olefin addition, which is one of the main limitations of the molecular metal bis(dithiolene) complexes, as we find the decomposition processes to be thermodynamically unfavorable. Our calculations also suggest that the preferred conformation of the [Ni(SeC)4]n bilayer lattice is parallel displaced, with the Se atoms positioned above the Ni atoms, which is different from the eclipsed conformation found for [Ni(SC)4]n. We also managed to optimize an adduct of [Ni(SC)4]n in the bilayer form, which exceed the ethylene coverage of molecular complexes. We calculate that the preferred three-dimensional geometry of the stacked sheets is eclipsed because of strong van der Waals interactions. Such an arrangement of the sheets indicates that these materials should be highly porous, pointing to the high capacity for olefin bindings. Indeed, a few moderately stable ethylene adducts have been located. Owing to their unique structures and chemical reactivity, these newly predicted materials can be potentially developed as electrocatalysts for olefin purification. © 2018 American Chemical Society.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Roll-to-Roll Scalable Production of Ordered Microdomains through Nonvolatile Additive Solvent Annealing of Block Copolymers

A new method, “nonvolatile solvent vapor annealing” (NVASA), has been developed to anneal block copolymers during film deposition by controlling the solvent drying process. Precise amounts of high boiling point additive added to the polymer solution briefly remain in the polymer film after casting, leaving the film in a swollen state, increasing its chain mobility, and ultimately improving domain order. We demonstrated the effectiveness of NVASA on several block copolymer systems and used in situ grazing incidence small-angle X-ray scattering (GISAXS) to validate the ordering process during the self-assembly. The simplicity and reproducibility of the method is attractive for implementation in large-scale manufacturing processes such as roll-to-roll printing as swell ratio is easily controlled by the amount of additive used and separate annealing steps are not needed. This work potentially introduces a new way to quickly and cost effectively anneal block copolymers.

36 MATERIALS SCIENCE↗

1,2-Addition of Formic or Oxalic Acid to – N{CH 2 CH 2 (PiPr 2 )} 2 -Supported Mn(I) Dicarbonyl Complexes and the Manganese-Mediated Decomposition of Formic Acid

(PN H P)Mn(CO) 2 (I) carboxylate complexes (PN H P = HN{CH 2 CH 2 (PiPr 2 )} 2 ) were prepared in this study via 1,2-addition of either formic or oxalic acid to (PNP)Mn(CO) 2 (PNP = the deprotonated, amide form of the ligand –N{CH 2 CH 2 (PiPr 2 )} 2 ). The structural and spectral properties of these complexes were compared. The manganese formate complex was found to be dimeric in the solid state and monomeric in solution. Half an equivalent of oxalic acid was employed to form the bridging oxalate dimanganese complex. The catalytic competencies of the carboxylate complexes were assessed, and the formate complex was found to decompose formic acid catalytically. Both dehydrogenation and dehydration pathways were active as assessed by the presence of H 2 , CO 2 , and H 2 O. Lastly, the addition of LiBF 4 exhibited a strong inhibitory effect on the catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved CO 2 Capture Performance of Electrochemically Mediated Amine Regeneration Processes with Ionic Surfactant Additives

For the effective reduction of global CO 2 emissions, it is essential to develop and deploy efficient and cost-effective technologies for CO 2 capture, especially from large point sources. We recently developed an electrochemically mediated amine regeneration (EMAR) system to replace traditional thermal desorption for the capture of CO 2 from post-combustion flue gases. Despite EMAR effectiveness on a laboratory scale, concerns regarding the high gas-to-liquid ratio in the electrochemical cell and long-term instability of the electrodes need to be addressed before further scale-up of the process to a pilot plant and beyond can be entertained. Accordingly, we investigated the effect of using sodium dodecyl sulfate (SDS) as an anionic surfactant and dodecyltrimethylammonium bromide (DTAB) as a cationic surfactant on the process operation. It was found that it is advantageous to use an anionic surfactant for a system such as EMAR that contains hydrophilic electrodes and a positively charged electrochemically active species. The overall cell resistance was notably reduced when SDS anionic surfactant was used. The precipitation of copper particles observed in the anode outlet when no surfactant was used was effectively avoided when SDS was added to the electrolyte, resulting in electrode stability. In addition, smaller gas bubbles were produced in the presence of the SDS surfactant, which resulted in less blockage of the electrode by the gas with a resultant lower cell potential under constant current conditions, driving more efficient CO 2 desorption. This led to an ~25% reduction in the electrochemical energy requirement, the lowest ever achieved experimentally for the EMAR process. Altogether, the addition of a very low concentration of SDS resulted in the successful circumvention of the important problems faced by the EMAR system regarding further scale-up.

36 MATERIALS SCIENCE↗

Poly(vinylferrocene) as an Ionomer and Sulfur-Confining Additive for Lithium–Sulfur Batteries

Lithium-sulfur (Li-S) batteries are promising owing to their high energy density, environmental benignity, and low cost. Most of the commonly used binders in Li-S battery cathodes are inert and have no significant effect on the challenges of sulfur as a cathode material, such as the polysulfide shuttle effect, low ionic/electronic conductivity, and a sluggish redox reaction. In this work, we demonstrate the use of poly(vinylferrocene) (PvFc) as a binder additive that can effectively increase the ionic conductivity of the cathode and act as a sulfide confining agent. Electrochemical tests performed with PvFc as part of the binder mixture used to cast the cathodes demonstrate an increase in rate capability and cycle life when compared to the baseline samples. Ionic conductivity measurements and X-ray photoelectron spectroscopy suggest that the π-cation molecular interaction between the cyclopentadienyl rings from ferrocene and Li + act like an ion couple with ferrocene acting as a static, covalently bound acceptor of Li + ions that enhances their mobility through the cathode. This coupled with the affinity between the ferrocenyl cations and the Li salt anions, which provides more distribution of counterions for Li + movement and improves accessibility to the cathode S reservoir, make PvFc a promising ionomer for Li-S batteries. In addition, the π-cation bonds between cyclopentadienyl and lithium polysulfides produce a sulfide confining effect that mitigates capacity fade through polysulfide dissolution. Furthermore, this work demonstrates an expansion in the utility of PvFc as a component in Li-ion batteries, which so far is mostly limited to use as an active material in organometallic batteries.

25 ENERGY STORAGE↗