SEARCH · Engineering Papers

Results for “target variability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

The ACCP Inclined Orbit Project: Enabling New and Synergistic Aerosol Remote Sensing Inversions

Atmospheric aerosols have high spatiotemporal variations due to their diverse sources including windblown dust, wildfires, volcanic eruptions, and anthropogenic emissions. These aerosols also have strong diurnal emission characteristics that influence long-range transport, air quality, Earth’s radiation budget, biogeochemical cycles, and weather forecasting. While current sensors can measure the steady-state of global 3D cloud and aerosol properties, we lack the observational datasets to discover the diurnal variability of aerosols, even at seasonal and regional scales, because these missions utilize sun synchronous orbits. An Aerosols and Clouds, Convection and Precipitation (ACCP) observing system has been established as part of NASA’s new Earth System Observatory (ESO) to fulfill the science needs presented in the 2017 Earth Science Decadal Survey. The selected ACCP architecture encompasses sensors in two orbit planes, one of which utilizes an inclined orbit (nominally ~55 degrees at a 407 km altitude) to advance our understanding of aerosol and cloud properties and target the dynamics of the cloud and aerosol processes on sub-daily time scales. The anticipated instrumentation suite for the ACCP Inclined Orbit Project is a Stereo Camera System, Polarimeter, Microwave Radiometer, Two-Frequency Radar, and Backscatter Lidar. The polarimeter is expected to have multiple wavelength bands and viewing angles to enable accurate retrievals of aerosol microphysical and optical properties. The backscatter lidar will provide vertical profiles of attenuated backscatter and depolarization ratio at two wavelengths, with better daytime signal-to-noise ratio than previous space-based lidar systems to improve aerosol detection/typing and estimates of aerosol optical properties. The stereo camera system, while designed primarily for clouds, will also provide aerosol plume heights and air motions at the plume heights. This invited presentation will provide (1) an overview of the ACCP Inclined Orbit Project, (2) a description of the new sensor capabilities and orbital characteristics, and (3) a preview of the potential for new synergistic aerosol inversion techniques.

John E Yorks↗

DOE OSTI2015

First Results of $\nu_e$ Appearance Analysis and Electron Neutrino Identification at NOvA

NOvA is a long-baseline accelerator-based neutrino oscillation experiment that is optimized for $\nu_\mu\to\nu_e$ measurements. It uses the upgraded NuMI beam from Fermilab and measures electron-neutrino appearance and muon-neutrino disappearance at its Far Detector in Ash River, Minnesota. The $\nu_e$ appearance analysis at NOvA aims to resolve the neutrino mass hierarchy problem and to constrain the CP-violating phase. The first data set of $2.74\times10^{20}$ protons on target (POT) equivalent exposure taken by NOvA has been analyzed. The first measurement of electron-neutrino appearance in NOvA provides solid evidence of $\nu_\mu\to\nu_e$ oscillation with the NuMI beam line. Electron-neutrino identification is the key ingredient for the $\nu_e$ appearance analysis. The electron-identification algorithm used to produce the primary results presented here compares 3-D shower-energy profiles with Monte Carlo prototypes to construct likelihoods for each particle hypothesis. Particle likelihoods, among other event-topology variables, are used as inputs to an Artificial Neural Network for the final electron-neutrino identification. The design and implementation of this algorithm is also presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

The Sensitivity of Hyporheic Exchange to Fractal Properties of Riverbeds

Hyporheic exchange in riverbeds is driven by current-bed topography interactions. Because riverbeds exhibit topographic roughness across scales, from individual grains to bedforms and bars, they can exhibit fractal patterns. This study analyzed the influence of fractal properties of riverbed topography on hyporheic exchange. A set of synthetic fractal riverbeds with different scaling statistics was used as inputs to sequentially coupled numerical simulations of turbulent channel flow and hyporheic flow. In the analysis, the maximum power spectrum (dune size) and the fractal dimension (topographic complexity) were considered as independent variables and we then investigated how interfacial fluxes and hyporheic travel times are functionally related to these variables. As the maximum power spectrum increases (i.e., dune height to flow depth ratio), the average interfacial flux increases logarithmically whereas it increases exponentially with an increase in fractal dimension. Hyporheic exchange is more sensitive to additional roughness (larger fractal dimensions) than to bedform size (larger maximum power). Our results imply that fractal properties of riverbeds are crucial to predicting hyporheic exchange. The predictive relationships we propose could be integrated with reduced complexity, large-scale models. Further, they can also be used to design artificial topographies that target hyporheic ecosystem services.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Disruption of the tagF Orthologue in the epa Locus Variable Region of Enterococcus faecalis Causes Cell Surface Changes and Suppresses an eep -Dependent Lysozyme Resistance Phenotype

The disease-producing capacity of the opportunistic pathogen Enterococcus faecalis is enhanced by the ability of the bacterium to evade killing by antimicrobial agents. Survival of E. faecalis in the presence of the human antimicrobial enzyme lysozyme is mediated in part by the site 2 metalloprotease Eep; however, a complete model of enterococcal lysozyme resistance has not been elucidated. To better understand the molecular basis for lysozyme resistance in E. faecalis, we analyzed Δeep suppressor mutants that acquire resistance to lysozyme through mutation of the gene OG1RF_11713, a predicted teichoic acid biosynthesis-encoding gene located within the variable region of the enterococcal polysaccharide antigen (epa) locus. Sequence comparisons revealed that OG1RF_11713 is most similar to the cytidine-5'-diphosphate (CDP)-glycerol:poly-(glycerolphosphate)glycerophosphotransferase TagF from Staphylococcus epidermidis. Inactivation of OG1RF_11713 in both the wild-type and Δeep genetic backgrounds was sufficient to increase the resistance of E. faecalis OG1RF to lysozyme. Minimal amounts of N-acetylgalactosamine were detectable in cell wall carbohydrate extracts of OG1RF_11713 deletion mutants, and this was associated with a reduction in negative cell surface charge. Targeted disruption of OG1RF_11713 was also associated with increased susceptibility to the antibiotic polymyxin B and membrane-targeting detergents and decreased susceptibility to the lantibiotic nisin. Furthermore, this work implicates OG1RF_11713 as a major determinant of cell envelope integrity and provides further validation that lysozyme resistance is intrinsically linked to the modification of enterococcal cell wall polysaccharides.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2018

Advanced Reaction System Program: Materials for ARS Reaction Chambers (FY18 Milestone, Subtask 3.3)

The objective of this effort is to identify materials and manufacturing technology that will allow the rapid construction and evaluation of computer modeled advanced reactor system designs to process specific carbon feedstock materials. Before full scale reaction systems can be built, prototypes need to be constructed and operated to validate the proposed new system performance against target criteria. The first steps, however, are to understand what type of materials are needed that can withstand the targeted process environments and determine how structures using those materials can be built. A wide range of reaction vessel conditions may exist in the processes being considered that could involve temperatures up to 1200°C, abrasive materials (high velocity coal and coal ash), different carbon feedstock materials (coal, biomass, and process wastes such as petcoke), corrosive and oxidizing/reducing gases, different material phases (solid, liquid, and gas), cyclic temperatures, microwave energy, customized vessel construction material needs (process stability, cost, weight, and compatibility with other materials), along with other known/unknown variables – all of which must be considered in selecting materials and considering manufacturing processes. The current focus of the research is to develop a reaction vessel sidewall structure consisting of a metal outer support and an inner ceramic (or cermet) protective surface. Ceramic coatings are desired because of their good corrosion and wear resistance, and because they are the material of choice to reduce metal shell temperature in high temperature processes. However significant property mismatches between metals and ceramics have been a roadblock to the joining of metals and ceramics.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS2012

Self-Nulling Lock-in Detection Electronics for Capacitance Probe Electrometer

A multi-channel electrometer voltmeter that employs self-nulling lock-in detection electronics in conjunction with a mechanical resonator with noncontact voltage sensing electrodes has been developed for space-based measurement of an Internal Electrostatic Discharge Monitor (IESDM). The IESDM is new sensor technology targeted for integration into a Space Environmental Monitor (SEM) subsystem used for the characterization and monitoring of deep dielectric charging on spacecraft. Use of an AC-coupled lock-in amplifier with closed-loop sense-signal nulling via generation of an active guard-driving feedback voltage provides the resolution, accuracy, linearity and stability needed for long-term space-based measurement of the IESDM. This implementation relies on adjusting the feedback voltage to drive the sense current received from the resonator s variable-capacitance-probe voltage transducer to approximately zero, as limited by the signal-to-noise performance of the loop electronics. The magnitude of the sense current is proportional to the difference between the input voltage being measured and the feedback voltage, which matches the input voltage when the sense current is zero. High signal-to-noise-ratio (SNR) is achieved by synchronous detection of the sense signal using the correlated reference signal derived from the oscillator circuit that drives the mechanical resonator. The magnitude of the feedback voltage, while the loop is in a settled state with essentially zero sense current, is an accurate estimate of the input voltage being measured. This technique has many beneficial attributes including immunity to drift, high linearity, high SNR from synchronous detection of a single-frequency carrier selected to avoid potentially noisy 1/f low-frequency spectrum of the signal-chain electronics, and high accuracy provided through the benefits of a driven shield encasing the capacitance- probe transducer and guarded input triaxial lead-in. Measurements obtained from a 2- channel prototype electrometer have demonstrated good accuracy (|error| < 0.2 V) and high stability. Twenty-four-hour tests have been performed with virtually no drift. Additionally, 5,500 repeated one-second measurements of 100 V input were shown to be approximately normally distributed with a standard deviation of 140 mV.

Blaes, Brent R.↗

NASA NTRS2015

Connections Between the TTL and Sea Surface Temperatures: Interannual Variability and Trends

Comprehensive chemistry climate models and satellite data are used to investigate the forcing of variability in the tropical lower stratosphere and upper troposphere. As this region is the origination region for air parcels which enter the stratosphere, it is important to understand variability in this region on timescales ranging from the seasonal to decadal. The warming trend in the tropical upper troposphere over the past 30 years is strongest near the Indo Pacific warm pool, while the warming trend in the western and central Pacific is much weaker. In the lower stratosphere, these trends are reversed: the historical cooling trend is strongest over the Indo Pacific warm pool and is weakest in the western and central Pacific. These zonal variations are stronger than the zonal mean response in boreal winter. Targeted experiments with a chemistry climate model are used to demonstrate that sea surface temperature trends are driving the zonal asymmetry in upper tropospheric and lower stratospheric tropical temperature trends. The anomalous circulation set up by the changing SSTs has led to zonal structure in the ozone and water vapor trends near the tropopause, and subsequently to less water vapor entering the stratosphere. Projected future sea surface temperatures appear to drive a temperature and water vapor response whose zonal structure is similar to the historical response. In the lower stratosphere, the changes in water vapor and temperature due to projected future sea surface temperatures is of similar strength to, though slightly weaker than, that due directly to projected future CO2, ozone, and methane. Finally, targeted experiments with a chemistry climate model are used to demonstrate that seasonality and the location of the peak warming of sea surface temperatures dictate the response of stratospheric water vapor to El Nino. In spring, El Nino events in which sea surface temperature anomalies peak in the eastern Pacific lead to a warming at the tropopause above the warm pool region, and subsequently to more stratospheric water vapor (consistent with previous work). However, in fall and in early winter, and also during El Nino events in which the sea surface temperature anomaly is found mainly in the central Pacific, the response is qualitatively different: temperature changes in the warm pool region are nonuniform and less water vapor enters the stratosphere. The difference in water vapor in the lower stratosphere between the two variants of El Nino approaches 0.3 ppmv, while the difference between the winter and spring responses exceeds 0.5 ppmv.

Tropical Tropopause Layer↗

DOE OSTI2025

Co-designing Spectral Transformation Oracles with Hybrid Oscillator-Qubit Quantum Processors: From Algorithms to Compilation

We co-design a family of quantum eigenvalue transformation oracles that can be efficiently implemented on hybrid discrete- or continuous-variable (qubit or qumode) hardware. To illustrate the oracle’s representation-theoretic power and near-term experimental accessibility, we encode a Gaussian imaginary time-evolution spectral filter. As a result, we define a continuous linear combination of unitaries block encoding. Due to the ancillary qumode’s infinite-dimensional nature, continuous-variable qumodes constitute a powerful compilation tool for encoding continuous spectral functions without discretization errors while minimizing resource requirements. We then focus on the ubiquitous task of preparing eigenstates in quantum spin models. For completeness, we provide an end-to-end compilation which expresses high-level oracles in terms of an experimentally realizable instruction set architecture in both 1D and 2D. Finally, we examine the leading-order effects of physical errors and highlight open research directions. Our algorithms scale linearly with the spatial extent of the target system and are applicable to both near-term and large-scale quantum processors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1995

A remotely sensed index of deforestation/urbanization for use in climate models

The object of this research is to use indirect measurements, notably thermal infrared, to describe urbanization and deforestation with parameters that can be used to assess, as well as predict, the effects of land use changes on local microclimate. More specifically, we use a new approach for the treatment of remotely sensed data; this is referred to as the 'triangle' method. The name triangle is given because the envelope of data points, when plotted as a function of surface radiant temperature versus vegetation index or fractional vegetation cover, exhibits the shape of a triangle. From the information contained on these 'scatter plots', land use changes can be related to two intrinsic surface variables, the surface moisture availability (M(sub 0))(sup 1) and fractional vegetation cover. Recent work by Carlson et al. indicate that the triangle shape on the scatter plots may be scale similar, suggesting that these two parameters are subject to the same interpretation on differing scales. A second objective in this research is to determine if historical data for Advanced Very High Resolution Radiometer (AVHRR) (NOAA satellite; 1.1 km resolution at nadir) can be used to assess changes in regional land use over time. To this end, two target areas were chosen for the investigation of urbanization and two for deforestation. The former comprise tow areas in Pennsylvania, one a small but rapidly growing population center (State College) and the other a medium-sized urban area which continues to undergo development (Chester County). The two deforestation sites consist of rain forest areas in western and central Costa Rica and a region in the Brazilian Amazon.

Gillies, Robert R.↗

NASA NTRS2011

Postural Stability When Leaning from Perceived Upright

The transition between quiet stance and gait requires the volitional movement of one?s center of mass (COM) toward a limit of stability (LOS). The goal of this study was to measure the effect of leaning from perceived upright on postural stability when voluntarily maintaining fixed stance positions and during perturbations of the support surface. The COM was derived from force plate data in 12 healthy subjects while standing with feet positioned so that lateral base of support was equal to foot length. For all conditions, arms were folded and subjects were instructed to lean without bending at the hips or lifting their feet. The LOS was determined during maximal voluntary leans with eyes open and closed. The COM was then displayed on a monitor located in front of the subject. Subjects were visually guided to lean toward a target position, maintain this position for 10s, return to upright, and then repeat the same targeted lean maneuver with eyes closed. Targets were randomly presented at 2? in 8 directions and between 2-6? in these same directions according to the asymmetric LOS. Subjects were then verbally guided to lean between 2? back and 4? forward prior to a perturbation of the support surface in either a forward or backward direction. The average LOS was 5.8? forward, 2.9? back, and 4.8? in left/right directions, with no significant difference between eyes open and closed. Center of pressure (COP) velocity increased as subjects maintained fixed stance positions farther from upright, with increased variability during eyes closed conditions. The time to stability and COP path length increased as subjects leaned opposite to the direction of the support surface perturbations. We conclude that postural stability is compromised as subjects lean away from perceived upright, except for perturbations that induce sway in the direction opposite the lean. The asymmetric LOS relative to perceived upright favors postural stability for COM movements in the forward direction.

Vanya, Robert D.↗

NASA NTRS2023

Modeling Global Indices for Estimating Non-Photosynthetic Vegetation Cover

Non-photosynthetic vegetation (NPV) includes plant litter, senesced leaves, and crop residues. NPV plays an essential role in terrestrial ecosystem processes, and is an important indicator of drought severity, ecosystem disturbance, agricultural resilience, and wildfire danger. Current moderate spatial resolution multispectral satellite systems (e.g., Landsat and Sentinel-2) have only a single band in the 2000–2500 nm shortwave infrared “SWIR2” range where non-pigment biochemical constituents of NPV, including cellulose and lignin, have important spectral absorption features. Thus, these current systems have suboptimal capabilities for characterizing NPV cover. This research used simulated spectral mixtures accounting for variability among NPV and soils to evaluate globally-appropriate hyperspectral and multispectral indices for estimation of fractional NPV cover. The Continuum Interpolated NPV Depth Index (CINDI), a weighted ratio index measuring lignocellulose absorption near 2100 nm, was found to produce the lowest error in estimating NPV cover. CINDI was less sensitive to variability in soil spectra and green vegetation cover than competing indices. While CINDI was sensitive to the relative water content of soil and NPV, this sensitivity allowed for correcting error in estimated NPV cover as water content increased. CINDI bands were less capable than Dual Absorption NPV Index (DANI) bands for maintaining continuity with the heritage Landsat SWIR2 band, but combining multiple CINDI bands demonstrated adequate continuity. Three SWIR2 bands with band centers at 2038, 2108, and 2211 nm can provide superior capabilities for future moderate resolution multispectral/superspectral systems targeting NPV monitoring, including the next generation Landsat mission (Landsat Next). These bands and the associated CINDI index provide potential for global NPV monitoring using a constellation of future superspectral sensors and imaging spectrometers, with applications including improving soil management, preventing land degradation, evaluating impacts of drought, mapping ecosystem disturbance, and assessing wildfire danger.

Index optimization↗

DOE OSTI2017

Quantitative impact of changes in marrow cellularity, skeletal size, and bone mineral density on active marrow dosimetry based upon a reference model

Purpose The hematopoietically active tissues of skeletal bone marrow are a prime target for computational dosimetry given potential risks of leukemia and, at higher dose levels, acute marrow toxicity. The complex three‐dimensional geometry of trabecular spongiosa, however, complicates schema for dose assessment in such a way that only a few reference skeletal models have been developed to date, and which are based upon microimaging of a limited number of cadaveric bone spongiosa cores. The question then arises as to what degree of accuracy is achievable from reference skeletal dose models when applied to individual patients or specific exposed populations? Methods Patient variability in marrow dosimetry were quantified for three skeletal sites — the ribs, lumbar vertebrae, and cranium — for the beta‐emitters 45 Ca, 153 Sm, and 90 Y, and the alpha‐particle emitters 223 Ra, 219 Rn, and 215 Po, the latter two being the immediate progeny of the former. For each radionuclide and bone site, three patient parameters were altered from their values in the reference model: (1) bone size as a surrogate for patient stature, (2) marrow cellularity as a surrogate for age‐ or disease‐related changes in marrow adiposity, and (3) the trabecular bone volume fraction as a surrogate for bone mineral density. Marrow dose variability is expressed as percent differences in the radionuclide S value given by the reference model and the patient‐parameterized model. The impact of radionuclide biokinetics on marrow dosimetry was not considered. Results Variations in overall bone size play a very minor role in active marrow dose variability. Marrow cellularity is a significant factor in dose variability for active marrow self‐irradiation, but it plays no role for radionuclides localized to the trabecular bone matrix. Variations in trabecular bone volume fractions impact the active marrow dose variability for short‐range particle emitters 45 Ca, 223 Ra, 219 Rn, and 215 Po in the vertebrae and ribs, skeletal sites with small spongiosa proportions of trabecular bone. In the cranium, with its relative high proportion of trabecular bone, significant differences in marrow dosimetry from the reference model were noted for all radionuclides. Conclusions Skeletal models of active marrow dosimetry should be more fully parameterized to permit closer matching to patient bone density and marrow cellularity, particularly when considering short‐range particle emitters localized to either the bone trabeculae or active marrow, respectively.

Geyer, Amy M.↗

DOE OSTI2017

CRISPR-Cpf1 mediates efficient homology-directed repair and temperature-controlled genome editing

Cpf1 is a novel class of CRISPR-Cas DNA endonucleases, with a wide range of activity across different eukaryotic systems. Yet, the underlying determinants of this variability are poorly understood. Here, we demonstrate that LbCpf1, but not AsCpf1, ribonucleoprotein complexes allow efficient mutagenesis in zebrafish and Xenopus. We show that temperature modulates Cpf1 activity by controlling its ability to access genomic DNA. This effect is stronger on AsCpf1, explaining its lower efficiency in ectothermic organisms. We capitalize on this property to show that temporal control of the temperature allows post-translational modulation of Cpf1-mediated genome editing. Finally, we determine that LbCpf1 significantly increases homology-directed repair in zebrafish, improving current approaches for targeted DNA integration in the genome. Together, we provide a molecular understanding of Cpf1 activity in vivo and establish Cpf1 as an efficient and inducible genome engineering tool across ectothermic species.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Comparative Performance of Three Eye-Tracking Devices in Detection of Mild Traumatic Brain Injury in Acute Versus Chronic Subject Populations

ABSTRACT Introduction Presently, traumatic brain injury (TBI) triage in field settings relies on symptom-based screening tools such as the updated Military Acute Concussion Evaluation. Objective eye-tracking may provide an alternative means of neurotrauma screening due to sensitivity to neurotrauma brain-health changes. Previously, the US Army Medical Research and Development Command Non-Invasive NeuroAssessment Devices (NINAD) Integrated Product Team identified 3 commercially available eye-tracking devices (SyncThink EYE-SYNC, Oculogica EyeBOX, NeuroKinetics IPAS) as meeting criteria toward being operationally effective in the detection of TBI in service members. We compared these devices to assess their relative performance in the classification of mild traumatic brain injury (mTBI) subjects versus normal healthy controls. Materials and Methods Participants 18 to 45 years of age were assigned to Acute mTBI, Chronic mTBI, or Control group per study criteria. Each completed a TBI assessment protocol with all 3 devices counterbalanced across participants. Acute mTBI participants were tested within 72 hours following injury whereas time since last injury for the Chronic mTBI group ranged from months to years. Discriminant analysis was undertaken to determine device classification performance in separating TBI subjects from controls. Area Under the Curves (AUCs) were calculated and used to compare the accuracy of device performance. Device-related factors including data quality, the need to repeat tests, and technical issues experienced were aggregated for reporting. Results A total of 63 participants were recruited as Acute mTBI subjects, 34 as Chronic mTBI subjects, and 119 participants without history of TBI as controls. To maximize outcomes, poorer quality data were excluded from analysis using specific criteria where possible. Final analysis utilized 49 (43 male/6 female, mean [x̅] age = 24.3 years, SD [s] = 5.1) Acute mTBI subjects, and 34 (33 male/1 female, x̅ age = 38.8 years, s = 3.9) Chronic mTBI subjects were age- and gender-matched as closely as possible with Control subjects. AUCs obtained with 80% of total dataset ranged from 0.690 to 0.950 for the Acute Group and from 0.753 to 0.811 for the Chronic mTBI group. Validation with the remaining 20% of dataset produced AUCs ranging from 0.600 to 0.750 for Acute mTBI group and 0.490 to 0.571 for the Chronic mTBI group. Conclusions Potential eye-tracking detection of mTBI, per training model outcomes, ranged from acceptable to excellent for the Acute mTBI group; however, it was less consistent for the Chronic mTBI group. The self-imposed targeted performance (AUC of 0.850) appears achievable, but further device improvements and research are necessary. Discriminant analysis models differed for the Acute versus Chronic mTBI groups, suggesting performance differences in eye-tracking. Although eye-tracking demonstrated sensitivity in the Chronic group, a more rigorous and/or longitudinal study design is required to evaluate this observation. mTBI injuries were not controlled for this study, potentially reducing eye-tracking assessment sensitivity. Overall, these findings indicate that while eye-tracking remains a viable means of mTBI screening, device-specific variability in data quality, length of testing, and ease of use must be addressed to achieve NINAD objectives and DoD implementation.

General & Internal Medicine↗

DOE OSTI2020

Proteomic Tissue-Based Classifier for Early Prediction of Prostate Cancer Progression

Although ~40% of screen-detected prostate cancers (PCa) are indolent, advanced-stage PCa is a lethal disease with 5-year survival rates around 29%. Identification of biomarkers for early detection of aggressive disease is a key challenge. Starting with 52 candidate biomarkers, selected from existing PCa genomics datasets and known PCa driver genes, we used targeted mass spectrometry to quantify proteins that significantly differed in primary tumors from PCa patients treated with radical prostatectomy (RP) across three study outcomes: (i) metastasis ≥1-year post-RP, (ii) biochemical recurrence ≥1-year post-RP, and (iii) no progression after ≥10 years post-RP. Sixteen proteins that differed significantly in an initial set of 105 samples were evaluated in the entire cohort (n = 338). A five-protein classifier which combined FOLH1, KLK3, TGFB1, SPARC, and CAMKK2 with existing clinical and pathological standard of care variables demonstrated significant improvement in predicting distant metastasis, achieving an area under the receiver-operating characteristic curve of 0.92 (0.86, 0.99, p = 0.001) and a negative predictive value of 92% in the training/testing analysis. This classifier has the potential to stratify patients based on risk of aggressive, metastatic PCa that will require early intervention compared to low risk patients who could be managed through active surveillance.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2025

The QPO in RE J1034+396 Originates in the Hot Corona

RE J1034+396 is one of the few active galactic nuclei (AGNs) with a significant quasiperiodic oscillation (QPO). The QPO has been observed in over 1 Ms of XMM-Newton observations spanning over a decade. We investigate the power spectral density function (PSD) of seven long (∼90 ks) XMM-Newton observations of the AGN RE J1034+396 in two energy bands. The soft (0.3–0.5 keV) band targets emission from the disk, while the hard (2–7 keV) band isolates the primary X-ray continuum emission from the corona. The QPO is significantly detected in the hard band of five of the seven observations. The best-fitting models indicate that the QPO detection in both bands is entirely attributable to the coronal emission with no additional contribution from the disk. This explains the strong coherence between the hard and soft bands at the QPO frequency. The covariance spectrum is consistent with this picture as the variability at QPO frequencies is attributed solely to fluctuations in the hot corona. The time lag as a function of energy is well described by a ∼2000 s intrinsic soft lag, resulting from the disk responding to emission from the corona, that undergoes phase wrapping at approximately the QPO frequency. By demonstrating that in this system the QPO arises in the corona, we provide new insights into the mechanisms generating QPOs.

Active galactic nuclei↗

NASA NTRS1981

Effect of sun and sensor geometry, canopy structure and density, and atmospheric condition on the spectral response of vegetation, with particular emphasis on across-track pointing

A computer modeling and simulation study carried out to assess the effects of various sun and sensor geometries and atmospheric conditions on the directional reflected radiance of several vegetated targets is described. Spectral responses at two wavelengths, 0.68 micron and 0.80 micron, are simulated at nine sensor zenith angles, five sensor azimuths, and nine solar zenith angles for six vegetation canopies under three atmspheric conditions. The six canopies comprise two different geometries of grass canopies at low, medium, and high leaf density. The results suggest that off-nadir viewing effects are more pronounced in the red than in the IR. However, the use of such transformations as the normalized difference index is found to reduce much of the variability seen in the bands. The magnitude of off-nadir viewing effects is found to be a function of canopy geometry.

Schnetzler, C. C.↗

NASA NTRS1994

Discrete-Layer Piezoelectric Plate and Shell Models for Active Tip-Clearance Control

The objectives of this work were to develop computational tools for the analysis of active-sensory composite structures with added or embedded piezoelectric layers. The targeted application for this class of smart composite laminates and the analytical development is the accomplishment of active tip-clearance control in turbomachinery components. Two distinct theories and analytical models were developed and explored under this contract: (1) a discrete-layer plate theory and corresponding computational models, and (2) a three dimensional general discrete-layer element generated in curvilinear coordinates for modeling laminated composite piezoelectric shells. Both models were developed from the complete electromechanical constitutive relations of piezoelectric materials, and incorporate both displacements and potentials as state variables. This report describes the development and results of these models. The discrete-layer theories imply that the displacement field and electrostatic potential through-the-thickness of the laminate are described over an individual layer rather than as a smeared function over the thickness of the entire plate or shell thickness. This is especially crucial for composites with embedded piezoelectric layers, as the actuating and sensing elements within these layers are poorly represented by effective or smeared properties. Linear Lagrange interpolation polynomials were used to describe the through-thickness laminate behavior. Both analytic and finite element approximations were used in the plane or surface of the structure. In this context, theoretical developments are presented for the discrete-layer plate theory, the discrete-layer shell theory, and the formulation of an exact solution for simply-supported piezoelectric plates. Finally, evaluations and results from a number of separate examples are presented for the static and dynamic analysis of the plate geometry. Comparisons between the different approaches are provided when possible, and initial conclusions regarding the accuracy and limitations of these models are given.

Heyliger, P. R.↗