Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “single-crystal diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,736 records · Page 97

Stability of Y-Ba-Cu-oxide phases in salt flux

The results of an investigation into the possibility of growing YBa2Cu3O7 (or Y123) single crystals from a NaCl-KCl flux (salt flux) are presented. They are compared with results for Y123 crystals grown from a Ba-Cu-oxide flux system. The chosen salt flux composition was 1:1 (NaCl:KCl). The preparation method of the solutes is presented, with particular attention given to the compounds surrounding the Y123 phase, such as Y2BaCuO6 (Y211). Optical microscopy was introduced to study the morphology of the sample; X-ray diffraction was used for phase identification; and a chemical analysis was effected. The Y123, Y211, and BaCuO2 phases were shown to be dissociated in the NaCl-KCl flux, and could not be recrystallized. A small amount of the flux could be added to create large-grain Y123 crystals, but single-crystal growth was not possible in a top-seeded NaCl-KCl solution. This is attributed to significant differences in solubility of the crystal elements, and phase separation caused by CuO crystal formation.

Tao, Y. K.↗

Synthesis, Structure, Characterization, and Decomposition of Nickel Dithiocarbamates: Effect of Precursor Structure and Processing Conditions on Solid-State Products

Single-crystal X-ray structures of four nickel dithiocarbamate complexes, the homoleptic mixed-organic bis-dithiocarbamates Ni[S2CN(isopropyl)(benzyl)]2, Ni[S2CN(ethyl)(n-butyl)]2, and Ni[S2CN(phenyl)(benzyl)]2, as well as the heteroleptic mixed-ligand complex NiCl[P(phenyl)3][(S2CN(phenyl)(benzyl)], were determined. Synthetic, spectroscopic, structural, thermal, and sulfide materials studies are discussed in light of prior literature. The spectroscopic results are routine. A slightly distorted square-planar nickel coordination environment was observed for all four complexes. The organic residues adopt conformations to minimize steric interactions. Steric effects also may determine puckering, if any, about the nickel and nitrogen atoms, both of which are planar or nearly so. A trans-influence affects the Ni-S bond distances. Nitrogen atoms interact with the CS2 carbons with a bond order of about 1.5, and the other substituents on nitrogen display transoid conformations. There are no strong intermolecular interactions, consistent with prior observations of the volatility of nickel dithiocarbamate complexes. Thermogravimetric analysis of the homoleptic species under inert atmosphere is consistent with production of 1:1 nickel sulfide phases. Thermolysis of nickel dithiocarbamates under flowing nitrogen produced hexagonal or -NiS as the major phase; thermolysis under flowing forming gas produced millerite (-NiS) at 300 C, godlevskite (Ni9S8) at 325 and 350 C, and heazlewoodite (Ni3S2) at 400 and 450 C. Failure to exclude oxygen results in production of nickel oxide. Nickel sulfide phases produced seem to be primarily influenced by processing conditions, in agreement with prior literature. Nickel dithiocarbamate complexes demonstrate significant promise to serve as single-source precursors to nickel sulfides, a quite interesting family of materials with numerous potential applications.

microscopy↗

Instrument development continues in Oak Ridge

Peer review panels composed of 80 external scientists recently visited Oak Ridge National Laboratory (ORNL) to review almost 700 proposals for experiments on 23 instruments at the Spallation Neutron Source (SNS) and High Flux Isotope Reactor (HFIR). These were proposed for the time period from January-June 2012. About 40% of the proposals were approved for beam time and 20% were placed on an alternate list if time becomes available. The Hybrid Spectrometer HYSPEC at SNS began its commissioning in September 2011. HYSPEC is otpimized for studying low energy dynamics in single-crystal samples using a broad variety of sample environments, and is equipped with a polarization analysis capability. It is expected to be available for users on a limited basis in the second half of 2012. The detector tank of CORELLI has been installed on beamline 9 at SNS. Now that the tank is in place, banks of neutron detectors and boron carbide shielding will be installed around the interior. CORELLI is optimized to probe complex disorder in crystalline materials through diffuse scattering from single-crystal samples. It will begin commissioning in 2014. CORELLI is one of four instruments being developed under the SING II (SNS Instruments Next Generation II) project. The others are the Macromolecular Neutron Diffractometer (MANDI), the Vibrational Spectrometer (VISION, scheduled to begin commissioning in 2012), and the Time of Flight Ultra Small Angle Neutron Scattering Instrument (TOF-USANS). The single crystal neutron diffractometer IMAGINE, was deliverd to HFIR in October 2011. Preliminary testing has been carried out. IMAGINE will provide atomic resolution information on chemical, organic, metallo-organic and protein single crystals that will enable their chemical, physical and biological structure and function to be understood. This instrument will benefit scientists with interests in pharmaceuticals, minerals and other inorganic crystals, small molecules, molecular organo-metallic crystals and metal-organic frameworks (MOFs) molecular crystal structures. The quasi-Laue geometry, combined with a large solid angle detector, will enable rapid data collection from crystals with volume < 1mm{sup 1} and unit cell < 100 {angstrom}. Construction and installation of the optical system is in progress. Commissioning is expected to start in April 2012.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structure, Properties, and Theoretical Electronic Structure of UCuOP and Np3S5.

The compounds UCuOP and NpCuOP have been synthesized and their crystal structures were determined from low-temperature single-crystal X-ray data. These isostructural compounds crystallize with two formula units in space group P4/nmm of the tetragonal system. Each An atom (An = U or Np) is coordinated to four O and four P atoms in a distorted square antiprism; each Cu atom is coordinated to four P atoms in a distorted tetrahedron. Magnetic susceptibility measurements on crushed single crystals indicate that UCuOP orders antiferromagnetically at 224(2) K. Neutron diffraction experiments at 100 and 228 K show the magnetic structure of UCuOP to be type AFI ( - -) where ferromagnetically aligned sheets of U atoms in the (001) plane order antiferromagnetically along [001]. The electrical conductivity of UCuOP exhibits metallic character. Its electrical resistivity measured in the ordered region with the current flowing within the tetragonal plane is governed by the scattering of the conduction electrons on antiferromagnetic spin-wave excitations. The electrical resistivity of single-crystalline NpCuOP shows semimetallic character. It is dominated by a pronounced hump at low temperatures, which likely arises owing to long-range magnetic ordering below about 90 K. Density of state analyses using the local spin-density approximation show covalent overlap between AnO and CuP layers of the structure and dominant contributions from 5f-actinide orbitals at the Fermi level. Calculations on a 2 2 2 supercell of NpCuOP show ferromagnetic ordering within the Np sheets and complex coupling between these planes. Comparisons of the physical properties of these AnCuOP compounds are made with those of the family of related tetragonal uranium phosphide compounds.

Wells, Daniel M.↗

Reciprocal space XRD mapping with varied incident angle as a probe of structure variation within surface depth

In this study, we used a differential-depth X-Ray diffraction Reciprocal Spacing Mapping (XRD RSM) technique to investigate the crystal quality of a variety of SRF-relevant Nb film and bulk materials. By choosing different X-ray probing depths, the RSM study successfully revealed evolution the of materials microstructure after different materials processes, such as energetic condensation or surface polishing. The RSM data clearly measured the materials crystal quality at different thickness. Through a novel differential-depth RSM technique, this study found: I. for a heteroepitaxy Nb film Nb(100)/MgO(100), the film thickening process, via a cathodic arc-discharge Nb ion deposition, created a near-perfect single crystal Nb on the surfaces top-layer; II. for a mechanically polished single-crystal bulk Nb material, the microstructure on the top surface layer is more disordered than that in-grain.

Yang, Qiguang↗

Synthesis and crystal structure of Ru{sup III}-supported tungstoantimonate [Sb{sub 2}W{sub 20}Ru{sup III}{sub 2}(H{sub 2}O){sub 2}(dmso){sub 6}O{sub 68}]{sup 4-}

The first Ru{sup III}-supported tungstoantimonate [Ru{sup II}(bpy){sub 3}]{sub 2}[Sb{sub 2}W{sub 20}Ru{sup III}{sub 2}(H{sub 2}O){sub 2}(dmso){sub 6}O{sub 68}].3dmso (bpy=bi-pyridine) (1a) has been successfully isolated as [Ru(bpy){sub 3}]{sup 2+} (Rubpy) salt by routine synthetic reaction in mixed solutions with dmso and water. Single-crystal X-ray analysis was carried out on 1a, which crystallizes in the triclinic system space group P-1 with a=16.804 (6), b=16.988 (6), c=17.666 (6) A, alpha=107.397 (13){sup o}, beta=106.883 (13){sup o}, gamma=103.616 (12){sup o}. V=4309 (3) A{sup 3}, Z=1 with R1=0.0773. The compound 1a reveals the following features: (1) Rubpy is firstly used as an alternative ruthenium-source for the synthesis of Ru-substituted heteropolytungstate; (2) the structure of 1a consists of four Ru{sup III}-O-S(CH{sub 3}){sub 2} and two W-O-S(CH{sub 3}){sub 2} bonds resulting in an assembly with C{sub 2} symmetry; (3) the Ru{sup III} ions are linked to two dmso groups via two Ru{sup III}-O-S(CH{sub 3}){sub 2} bonds, which represents the other dmso-coordination mode to Ru{sup III} in POM chemistry. The cyclic voltammetry studies of 1a in dmso/H{sub 2}SO{sub 4} (3/1 v/v) at pH 2.5 medium using the glassy carbon electrode as a working electrode show the respective electrochemical behaviors of the W-centers and the Ru-centers within 1a, which could be separated clearly. In addition, the compound 1a exhibits photoluminescence arising from pi*-t{sub 2g} ligand-to-metal transition of Rubpy. - Graphical abstract: The first Ru{sup III}-supported tungstoantimonate [Ru{sup II}(bpy){sub 3}]{sub 2}[Sb{sub 2}W{sub 20}Ru{sup III}{sub 2}(H{sub 2}O){sub 2}(dmso){sub 6}O{sub 68}].3dmso (bpy=bi-pyridine) (1a) has been synthesized using Ru(bpy){sub 3}Cl{sub 2} as an alternative ruthenium-source and structurally characterized.

36 MATERIALS SCIENCE↗

Quest for Environmentally-Benign Ligands for Actinide Separations: Thermodynamic, Spectroscopic, and Structural Characterization of U(VI) Complexes with Oxa-Diamide and Related Ligands

Complexation of U(VI) with N,N,N{prime},N{prime}-tetramethyl-3-oxa-glutaramide (TMOGA) and N,N-dimethyl-3-oxa-glutaramic acid (DMOGA) was studied in comparison with their dicarboxylate analog, oxydiacetic acid (ODA). Thermodynamic parameters, including stability constants, enthalpy and entropy of complexation, were determined by spectrophotometry, potentiometry and calorimetry. Single-crystal X-ray diffractometry, EXAFS spectroscopy, FT-IR absorption and laser-induced luminescence spectroscopy were used to obtain structural information on the U(VI) complexes. Like ODA, TMOGA and DMOGA form tridentate U(VI) complexes, with three oxygen atoms (the amide, ether and/or carboxylate oxygen) coordinating to the linear UO{sub 2}{sup 2+} cation via the equatorial plane. The stability constants, enthalpy and entropy of complexation all decrease in the order ODA > DMOGA > TMOGA, showing that the complexation is entropy driven and the substitution of a carboxylate group with an amide group reduces the strength of complexation with U(VI) due to the decrease in the entropy of complexation. The trend in the thermodynamic stability of the complexes correlates very well with the structural and spectroscopic data obtained by single crystal XRD, FT-IR and laser-induced luminescence spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monodispersed Ultrafine Zeolite Crystal Particles by Microwave Hydrothermal Synthesis

Microwave hydrothermal synthesis of zeolites is reviewed. Monodispersed ultrafine crystal particles of zeolite (Silicalite-1) have been synthesized in batch reactor vessels by microwave irradiation heating of aqueous basic silicate precursor solutions with tetra propyl ammonium hydroxide as the templating molecule. The effects of major process parameters (such as synthesis temperature, microwave heating rate, volume ratio (i.e., the volume of the initial synthesis solution over the total volume of the reactor vessel), and synthesis time on the zeolite particle characteristics are studied using a computer-controlled microwave reactor system that allows real-time monitoring and control of reaction medium temperature. The changes in the morphology, size and crystal structure of the particles are investigated using scanning electron microscope, dynamic light scattering, X-ray diffraction, and BET surface analysis. We have found that the synthesis temperature, volume ratio, and heating rate play a significant role in controlling the particle size, uniformity, and morphology. Microwave processing has generated new morphologies of zeolite particles (i.e., uniform block-shaped particles that contain mixed gel-nanocrystallites and agglomerated crystal particles) that could not be made by a conventional hydrothermal process. At higher synthesis temperature and lower volume ratio, irregular block-shaped particles were produced, whereas increasing the volume ratio promoted the formation of monodispersed single-crystal particles with uniform shape. Our results clearly demonstrate that faster microwave heating is advantageous to enhance the zeolite crystallization kinetics and produces larger-size crystal particles in shorter time. In addition, zeolite crystallization mechanisms, depending on the microwave heating rate, were also discussed.

36 MATERIALS SCIENCE↗