Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “setup”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

FY2020-21 parameters for Gold ions in Booster, AGS, and RHIC

Sections 1 through 6 of this report give parameters for low-energy gold ions circulating in RHIC at injection and in AGS at extraction. Section 7 gives parameters for Au79+ ions circulating in RHIC at the standard injection magnetic rigidity of 81.11378003 Tm. Sections 8 through 10 give parameters for medium-energy Au79+ ions circulating in RHIC at 31.2, 26.5, 19.5, 13.5 GeV per nucleon. To reach these energies, acceleration in RHIC is required. The magnetic rigidity at RHIC injection for these setups is 60.3050632557 Tm. The corresponding ion energy is 7.30950517185 GeV per nucleon.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Isospin dependence of Nucleon-Nucleon Short-range Correlations in Inclusive Scattering with Tritium and Helium-3

The nucleon-nucleon (NN) potential has a strong repulsive core. When a two-nucleon (sub)system falls into this range, they will interact strongly at short distance, and move away from each other with momenta above the Fermi level. This is called the NN Short range Correlations (SRCs). Previous experiments reported a neutron-proton pair (isos inglet) dominance in high-momentum nucleons. In inclusive electron scattering, this np dominance will cause a scaling behavior of cross sections at 1.4 < xbj = Q2/2m? < 2 where the high-momentum nucleons dominate. At Je?erson Lab Hall A we checked this hypothesis with electron Quasi-elastic (QE) scattering on A=3 nuclei systems. Our unique gas cell design made electron-tritium scattering possible for the ?rst time in a decade. The 2H, 3H, and 3He inclusive cross sections at 1 < xbj < 3 were measured in two experiments (E12-11-112 and E12-14-011) with a wide Q2 range (0.4 < Q2 < 3 GeV2). This thesis dis cusses the physics goals, experiment setup, and data analysis of the E12-11-112 experiment. Ratios of 3H/2H, 3He/2H and 3H/3He as well as absolute cross sections are presented at 0.4 < Q2 < 1.8 GeV2. NN SRC plateaus are observed in the cross section ratios at high Q2. The 3H/3He ratio of 0.84±0.01 at NN SRC dominant kinematics indicates a np to pp SRC pair ratio of 2.2±0.2 in A=3 nuclei. That implies a preference in T = 0 isospin singlet con?guration. No plateaus are observed at xbj > 2.

Li, Shujie↗
DOE OSTI2021

Cloud-Feedback Model Intercomparison Project: Tier 2 Simulations (Final Report)

The University of Miami (Subcontractor)’s Research Scientist James Benedict (with oversight by PI Amy Clement) was tasked with producing global climate model simulations as part of the Cloud-Feedback Model Intercomparison Project (CFMIP) Tier 2 protocol, managing the output of these simulations, providing assistance (as requested) to staff at Lawrence Livermore National Lab (LLNL) regarding model output and setup, and meeting with LLNL scientists and team members to coordinate work on the project. The simulations represent an important contribution to the CFMIP data repository and will advance understanding of a wide range of critical cloud, circulation, and precipitation responses to climate change. The Subcontractor completed all proposed simulations, formatted the model output to be compliant with CFMIP protocols, and published the model data to the CFMIP repository. When requested, the Subcontractor provided assistance to LLNL for model output and configuration queries. Benedict and/or Clement also met in person or virtually 1-2 times per year with project scientists to coordinate work and review results.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Boride-Carbon Hybrid Technology to Produce Ultra-Wear and Corrosion Resistant Surfaces for Applications in Harsh Conditions (Final Technical Report)

Engineered functional surfaces play an important role to enable new products and manufacturing processes that can endure harsh service conditions such as high impact and contact loads, highly abrasive wear, extreme temperatures, and corrosive environments. Engineered surfaces can also be instrumental to improving the efficient use of energy by reducing frictional losses and extending service life. The main objective of this project was to develop a hybrid surface engineering technology that combines the advantages of a novel ultrafast boriding process with the next generation of superhard carbon coatings. The hypothesis was that this hybrid process will offer an unprecedented combination of wear and corrosion resistance, low frictional losses and affordability for treated parts so that it can be utilized in many applications. During this project, a duplex process was developed that combines the advantages of ultra-fast electrochemical boriding with those of hard tetrahedral amorphous carbon coatings. Both technologies can be combined to form a hybrid technology that is characterized by low friction and wear properties combined with corrosion and fatigue resistance. Good adhesion of both layers to each other was one main goal of this project, that has been achieved with HF1 adhesion through the Rockwell-C adhesion test. In this project, the mechanical properties of the hybrid coating were modeled through a finite-element analysis approach. We can conclude that the FEA model resembles the actual samples and be utilized to predict mechanical behavior under impacts. Based on this model, application-oriented load conditions can be simulated for optimal layer design regarding thickness and mechanical properties. To exemplify, one conclusion that can be drawn from the nanoindentation model is a boride layer thickness of 50 µm is sufficient to effectively support the carbon coating on the identified AISI 1045 low carbon steel substrate material. The duplex treatment yields wear rates as low as 6 x 10 -8 mm 3 N -1 m -1 and a coefficient of friction of 0.14 when tested against a steel counter face in a ball-on-disk test setup. On the other hand, the wear rate of the only-borided AISI 1045 steel was 5 x 10 -5 mm 3 N -1 m -1 , about three orders of magnitude higher than the duplex coating. At the same time, duplex treated samples experience corrosion resistance, which could not be achieved with single-layer carbon coatings. The developed surface treatment withstands a 3-hour exposure to 15% HCl, while the only carbon coated counter sample shows severe delamination of the coating due to pin hole corrosion. The boride layer is chemically stable and pin hole free because it is formed through an electrochemical process under high current densities (700 mA/cm 2 ) and high temperature. Additionally, the hybrid coating led to at least 3x increase in fatigue strength of the steel substrate, which exceeds the target performance of 30% improvement. There are numerous potential applications for the duplex coatings. A representative application is bearing ball coatings for off-shore windmills. Compared to currently employed surface technologies in this field, the initial costs of applying our technology might be higher due to more process steps but the performance benefits lead to an increased life time of treated parts, which will lower the maintenance and replacement costs in the long-term. To validate the technology for this specific application, the team is currently investigating the process of white etching crack initiation of the duplex coating in collaboration with ANL. Overall, this project successfully validated that the boride-carbon hybrid technology can withstand harsh conditions. One possible approach to commercialization under consideration is to transfer the technology to a startup or an existing coatings company.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Contributions to the BeEST sterile neutrino search

Sterile neutrinos are hypothetical right-handed leptons that have been postulated as extensions to the Standard Model to help explain the origin of neutrino masses and the matter-antimatter asymmetry in the Universe. Sterile neutrinos with keV-scale masses are also a promising candidate for dark matter. LLNL and the Colorado School of Mines are developing an experiment to search for sterile neutrinos by measuring the \Beryllium-7 Electron capture in Superconducting Tunnel junctions (STJs)" (the \BeEST" Experiment). When 7 Be implanted into STJ radiation detectors decays by electron capture, the neutrino escapes and the energy of the recoiling 7 Li nucleus can be measured with high accuracy. Using conservation of energy and momentum, the mass of the emitted neutrino can then be found. Sterile keV neutrinos would generate additional peaks in the spectrum, and the experiment uses high-resolution STJs to observe such a potential signal. During my internship, I contributed to different aspects of the BeEST experiment. I designed a UHV setup for X-ray spectroscopy analysis with STJs. It will allow high-resolution X-ray spectroscopy of different materials to examine the broadening in the BeEST spectra, the origins of which are unknown but may be related to material effects inside the STJ detectors. The design accounts for the specific demands of the BeEST project, but provides a degree of flexibility that makes it useful for other potential STJ projects. Additionally, to test the accuracy of the electronics and data analysis routine, an arbitrary waveform generator (AWG) will be used to generate simulated spectra that contain sterile neutrino signals of a specified mass and admixture. For this I programmed an AWG to output random STJ signals whose amplitudes follow the appropriate user-de ned probability distribution. The AWG signals can be input into the 32-channel preamplifier to simulate any spectrum of interest and test the uniformity of the amplifier chain, as well as the sensitivity of the data analysis.

42 ENGINEERING↗
DOE OSTI2021

Sierra/SD – Verification Test Manual – 5.0

This document presents tests from the Sierra Structural Mechanics verification test suite. Each of these tests is run nightly with the Sierra/SD code suite and the results of the test checked versus the correct analytic result. For each of the tests presented in this document the test setup, derivation of the analytic solution, and comparison of the Sierra/SD code results to the analytic solution is provided. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Sierra/SolidMechanics 5.0 Verification Tests Manual

Presented in this document is a small portion of the tests that exist in the Sierra/SolidMechanics (Sierra/SM) verification test suite. Most of these tests are run nightly with the Sierra / SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra / SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra/SM Example Problems Manual. Note, many other verification tests exist in the Sierra/SM test suite, but have not yet been included in this manual.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Sierra/Aria Verification Manual (V.5.0)

Presented in this document is a portion of the tests that exist in the Sierra Thermal/Fluids verification test suite. Each of these tests is run nightly with the Sierra/TF code suite and the results of the test checked under mesh refinement against the correct analytic result. For each of the tests presented in this document the test setup, derivation of the analytic solution, and comparison of the code results to the analytic solution is provided. This document can be used to confirm that a given code capability is verified or referenced as a compilation of example problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

First observation of the production of three massive vector bosons and search for long-lived particles using delayed photons in pp collisions at $\sqrt{s}=13\text{ TeV}$

This thesis presents the first observation of the production of three massive vector bosons (VVV with V = W, Z) in proton-proton collisions at the LHC at $\sqrt{s}=13\text{ TeV}$. The search was performed in final states with two same-sign charged leptons (electrons or muons) plus one or two jets, and three, four, five, or six leptons from WWW, WWZ, WZZ and ZZZ decays, with a data sample corresponding to an integrated luminosity of 137 fb -1 collected by the CMS experiment during 2016-2018. The observed (expected) significance of the combined VVV production is 5.7 (5.9) standard deviations, and the production cross section is measured to be 1010$^{+210}_{-200}$(stat) $^{+150}_{-120}$(syst) fb, corresponding to a signal strength of 1.02$^{+0.26}_{-0.23}$. We also found evidence for WWW and for WWZ production, with observed significances of 3.3 and 3.4 standard deviations, respectively. The measured production cross sections for individual VVV processes are also reported. The establishment of VVV production opens a new program of many standard model studies (such as gauge-gauge and Higgs-gauge couplings), and provides a new tool for many new physics searches (such as anomalous gauge coupling searches, new resonance searches). This thesis also reports a search for long-lived supersymmetry particles decaying to photons in proton-proton collisions at the LHC at $\sqrt{s} = 13 TeV$, with a data sample corresponding to an integrated luminosity of 77.4 fb -1 collected by CMS during 2016-2017. Results are interpreted with a gauge-mediated supersymmetry breaking model, where the long-lived particle is a neutralino and the lightest supersymmetry particle is a gravitino. For neutralino proper decay lengths of 0.1, 1, 10, and 100 m, masses up to 320, 525, 360, and 215 GeV are excluded at 95% confidence level, respectively. This result extends the limits from previous searches by one order of magnitude for the neutralino proper decay length and up to 100 GeV more for the neutralino mass. Motivated by the need for precision timing measurements for long-lived particle searches, as well as for improvements in general object reconstruction performance, the timing performance of two types of sensors are studied in this thesis: one with a Cerium doped Lutetium Yttrium Orthosilicate (LYSO:Ce) crystal as the scintillator and a silicon photomultiplier (SiPM) as the photodetector, another with a Cadmium-Telluride sensor as the active material for a sampling calorimeter. Both setups have been demonstrated with test beams to be able to provide timing measurements of particles with a resolution below 30 ps.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Dual-Purpose Canister Filling Demonstration Project Progress Report

This report discusses the initial progress made at the Oak Ridge National Laboratory to support direct disposal of dual-purpose canisters (DPCs) using filler materials to demonstrate that the probability of criticality in DPCs during disposal to be below the probability for inclusion in a repository performance assessment. In the initial phase of a multi-phase effort that will result in a full-scale demonstration, a computational fluid dynamics (CFD) model was developed to gauge the filling process and to uncover any unforeseen issues. The initial filling simulations of the lower region (mouse holes) of a prototypic DPC show successful removal of the inner space voids and smooth, even progression of the liquid level. In the initial phase, flow through a pipe that is similar to the drain pipe in a DPC will be investigated separately to gain valuable insight of flow regime inside a pipe. The initial experimental setups for validating the computational filling model have been designed, and the various assembly parts are being procured. The experience gained from the initial experiments will be applied to the next steps toward a full-scale demonstration and to the validation of multiphysics filling simulation models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

A Low Cost SIPM Evaluation and Control Prototyping System including accurate bias voltage generation, leakage current measurement, and temperature control using Peltier cooling

We describe an electronics system to operate SIPMs in the laboratory. The system is comprised of a single channel amplifier board (SIPM Amp) and a 4-channel control board to which up to 4 SIPM Amp boards can be connected. The control board supplies a common low voltage power for the amplifiers. All channels feature individually regulated bias and Peltier power voltages, along withPt10K RTD readout. A graphical user interface allows control of the bias voltages, amplifier voltage, Peltier voltages, and also provides for readback of leakage currents and other voltages. The GUI app has a feedback loop to measure the SIPM temperature (with the PT10K) and generate correction voltages to the Peltier to regulate the temperature. The temperatures, which can be achieved by Peltier cooling depend on the thermal design of the setup, the practical limit being about 50C below ambient. The SIPM Amp. board is a small (3x5cm) PCB that has a single SIPM readout channel. The SIPM scan be surface mounted on the pcb or connected to a 2-pin 0.100" socket. The area around the SIPM footprint is thermally isolated by perforations in the PCB. The RTD is located inside the thermal break. Onboard is BV and LV filtering. The 10X amplifier is based on MiniCircuits' GALI-S66+ integrated circuit, tweaked for a 6V power. The amplifier was selected for a combination of high bandwidth, low noise, and low power. An accoupled amplifier output is connected to an SMA connector. For best operation of this inverting amplifier the output signal should be in the range of 0 to -1V.The Amplifier board is connected to the Control board with a 10-conductor 0.025" pitch ribbon cable, carrying all the services. Peltier power for currents more than 1A should use a separate 2-contact connector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Algebraic Multigrid with Optimal Interpolation and Adaptive Smoothers (Final Report)

The project team continued with work on developing new bootstrap AMG techniques for solving symmetric and non-symmetric PDE systems. The focus of this work is to derive more reliable measures of the quality of the coarse space set than the convergence rate of the standard F-relaxation form of CR and a more robust form of interpolation than the so-called ideal form. We have successfully derived a sharp variant of CR that gives the precise convergence rate of the two-grid method using this optimal interpolation and, in addition, we derived a new Generalized Bootstrap AMG setup algorithm that uses as its main tool a multilevel eigensolver for the generalized eigenvalue problem involving the system matrix and the symmetrized smoother. In addition, the approach allows for general block smoothers with overlap. We have applied the method to scalar diffusion problems, linear elasticity, and Maxwell’s and the method shows marked improvements over existing AMG methods for these problems. In addition, the team worked with CASC members on new forms of ideal AMG interpolation.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Concentrating solar power: Concentrating optics for lower levelized energy costs (COLLECTS) (Final report)

This continuation is a synthesis of the first three tasks of the first year of the project. Hence, we try to follow as much as possible the outline of the SOPO instead of a purely chronological order. For each task, we remind the SOPO objective. We then present our approaches and our results. We start by discussing the objectives and results of the Task 1.1 that mainly consisted in investigating the unit cell of the metasurface concentrators. We then discuss the Task 1.2 that describes the strategies that can be used to design broad angle metasurfaces. Finally, we present the fabrication details and the experimental setups in the last part of the report that mainly corresponds to the Task 1.3.

14 SOLAR ENERGY↗
DOE OSTI2020

Evaluation of Exterior Shades at PNNL Lab Homes and Occupied Field Sites (Final Report)

In residential applications, heat transfer through windows accounts for a significant portion of a home’s cooling load. Exterior shades are window attachments that can be applied on the exterior-side of windows in a home. Exterior shades can reduce solar heat gain, reduce glare through a window, and improve comfort in the home. To assess the performance of residential exterior shades, the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Building Technologies Office (BTO) commissioned a series of field studies for exterior fabric shades to be performed by Pacific Northwest National Laboratory (PNNL) during the cooling seasons of 2019 and 2020. This report describes the experimental setup and results of these exterior shade field studies. PNNL, in collaboration with Lawrence Berkeley National Laboratory (LBNL), evaluated exterior shades at the PNNL Lab Homes and three occupied field sites in Richland, Washington. At the Lab Homes, the energy performance of exterior shades was evaluated in a controlled side-by-side environment. At the occupied field sites, exterior shades were characterized by measuring shade usage, documenting installation practices, and surveying customer perspectives.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

The Impact of Wall Control Performance on Connected Lighting Systems

Wall controls form the only touchpoint for individual room users and that room’s lighting control system. As such, these interfaces strongly influence user understanding and utilization of the system, as well as overall acceptance. The Next Generation Lighting Systems (NGLS) program began an evaluation of the wall controls in 14 connected lighting systems installed in various rooms of the NGLS Living Lab at Parsons School of Design in New York City. These systems demonstrate the wide range of approaches to wall control setup and functionality taken by manufacturers. Characterizing the 14 controls across six attributes, only four, or 29%, were identical. Requirements for wall control design were not specified explicitly by NGLS. Rather, wall controls were required to provide system performance according to three criteria: vacancy control (manual on/auto off) of two zones; manual continuous dimming of the same two zones; and an AV presentation mode in one of the two zones. This report examines the classification of entries, the assessment method used to evaluate the systems from installation through day-to-day use, and the system performance observed to date for each.

42 ENGINEERING↗
DOE OSTI2021

HED Hydrodynamics in the Common Modeling Framework

Within the Common Modeling Framework (CMF), the HED Hydrodynamics Project has implemented a common methodology, or "Authority", for modeling high energy density (HED) experiments by extending development of the Eulerian Applications Project code Authority, "EAPA," to include relevant physics models, customization tools and templates, and in situ and post-processing capabilities. Additionally, several models for small-scale HED experiments were successfully added to the CMF and simulations reproduce the results of preexisting, benchmarked input decks. We expect use of the CMF to improve our effectiveness in developing predictive capabilities for experiments ranging from small-scale planar single-interface, single-shock to multi-interface, multi-shock configurations and up through multi-shell inertial confinement fusion (ICF) implosions. Additionally, this will strengthen our ability to design future targeted experiments. Using the CMF infrastructure and Authorities for HED modeling has three key impacts. First, it enables a version-controlled, pedigreed and archived base model for each experiment with tools that allow easy setup, execution and analysis of simulations to assess and/or expose sensitivities to various parameters. Second, having a common base set of inputs and physics definitions helps identify systematic differences between models in the codes and experimental data to support code validation, and build confidence in our predictive capabilities. Finally, designed to work in concert with multiple programs and projects including PEM, IC, OES, V&V and DSW, the CMF supports improved collaboration and integration through shared model definitions, data, simulations and results, enhancing the workflow required to underwrite the knowledge base and capabilities ultimately required for stockpile stewardship

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Cooperative Education

M-3 Focused Experiments is a group at Los Alamos National Lab (LANL) and is under the Dynamic Experiments Division. Their work surrounds the diagnostics and study of explosives and their interaction with materials. The data collected is used to better understand the erratic nature of explosions and high velocity projectiles. Through better comprehension of this science, the overall national security will be improved while innovations are made along the way. Despite the strong drive for research and development, the lab holds safety above all else and constantly updates procedures to protect LANL employees and their environment. At any time, there are multiple projects going on at once within the team and I am tasked with assisting the Firing Site Leaders and various research diagnosticians in any way possible with the setup, testing, and execution of data collection for each experiment. Such data includes velocity, fragmentation characteristics, and the spread of energy across the material to name a few. During my summer employment with the lab, my main goal is to maintain a questioning attitude and learn as much possible about the research and development side of science and engineering. Throughout the duration of the Co-op, many experiments will take place at specially designed firing sites which is where I will be spending most of my time.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗