Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “separation processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Ion soft landing: A unique tool for understanding electrochemical processes

Ion soft landing (SL) is a preparative mass spectrometry approach that enables deposition of mass- and charge-selected gaseous ions onto surfaces with controlled kinetic energy. The unique capabilities of SL provide an opportunity to populate electrode–electrolyte interfaces (EEIs) with well-defined intact electroactive ions of known composition, thereby facilitating the characterization of their intrinsic electrochemical properties. Here, in this perspective, we describe the SL technique and discuss how it may be used to study the effect of the charge state, stoichiometry, and composition of large redox active molecules and clusters on their electron transfer kinetics. SL has enabled the characterization of redox-active species that cannot be purified and examined using conventional bulk-phase separation and deposition approaches. Furthermore, precise control over the deposition process provides an opportunity to prepare and characterize well-defined EEIs relevant to energy storage and conversion, catalysis, and sensing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An experimental and modeling study of the application of membrane contactor reactors to methanol synthesis using pure CO 2 feeds

We describe here a post-combustion CO 2 capture and utilization (CCU) technology that converts the CO 2 into methanol (MeOH), a valuable chemical, thus providing a way to monetize the carbon captured to offset process costs. Methanol synthesis (MeS) has been discussed recently for application to CCU, but thermodynamic limitations make it difficult to convert in a single pass a large CO 2 fraction. Conventional catalysts show slow kinetics in converting CO 2 -rich syngas (or pure CO 2 ) into MeOH. Our Group developed a novel MeS process, employing a membrane contactor reactor (MCR) system that attains carbon conversions significantly higher than equilibrium. Our focus here is to process pure CO 2 streams by combining the MCR with a separate reactor, which converts the CO 2 into a syngas via the reverse water gas shift (RWGS) reaction. In this preliminary effort, the RWGS reactor (RWGSR) is assumed to reach equilibrium. Additional MeS kinetic rate data are generated validating experimentally the ability of the MeS-MCR to process as a feed the RWGSR exit stream. The performance of the combined (RWGSR/MeS-MCR) system is then simulated using a recently developed MeS-MCR model. In conclusion, the findings are encouraging, and research is currently ongoing to experimentally validate the RWGSR/MeS-MCR system performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Combined hydrothermal liquefaction and catalytic hydrothermal gasification system and process for conversion of biomass feedstocks

A combined hydrothermal liquefaction (HTL) and catalytic hydrothermal gasification (CHG) system and process are described that convert various biomass-containing sources into separable bio-oils and aqueous effluents that contain residual organics. Bio-oils may be converted to useful bio-based fuels and other chemical feedstocks. Residual organics in HTL aqueous effluents may be gasified and converted into medium-BTU product gases and directly used for process heating or to provide energy.

09 BIOMASS FUELS↗
DOE OSTI2021

Disjunctive linear separation conditions and mixed-integer formulations for aircraft conflict resolution

In this paper, we address the aircraft conflict resolution problem in air traffic control. We introduce new mixed-integer programming formulations for aircraft conflict resolution with speed, heading and altitude control which are based on disjunctive linear separation conditions. We first examine the two-dimensional aircraft conflict resolution problem with speed and heading control represented as continuous decision variables. We show that the proposed disjunctive linear separation conditions are equivalent to the classical nonlinear conditions for aircraft separation. Further, we characterise conflict-free trajectories based on aircraft velocity bounds and propose a simple pre-processing algorithm to identify aircraft pairs which are either always conflict-free, or which cannot be separated using speed and heading control only. We then incorporate altitude control and propose a lexicographic optimisation formulation that aims to minimise the number of flight level changes before resolving outstanding conflicts via two-dimensional velocity control. The proposed mixed-integer programming formulations are nonconvex, and we propose convex relaxations, decomposition methods and constraint generation algorithms to solve the two-dimensional and lexicographic optimisation formulations to guaranteed optimality. Numerical experiments on four types of conflict resolution benchmarking instances are conducted to test the performance of the proposed mixed-integer formulations. Further, the proposed method is compared against two benchmarks based on state-of-the-art approaches for the aircraft conflict resolution problem. Our numerical results show that the proposed method largely outperforms both benchmarks in terms of runtime and is able to solve significantly more instances to global optimality.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Splitting Mono- and Di-Branched Alkane Isomers by a Robust Aluminum-Based Metal-Organic Framework Material with Optimal Pore Dimensions

The separation of alkanes with different degrees of branching, particularly mono- and dibranched isomers, represents a challenging yet important industrial process for the production of premium gasoline blending components with high octane number. We report here the separation of linear/monobranched and dibranched alkanes through complete molecular sieving by a robust aluminum-based MOF material, Al-bttotb (H 3 bttotb = 4,4',4"-(benzene-1,3,5-triyltris(oxy))tribenzoicacid). Single- and multicomponent adsorption experiments reveal that the material adsorbs linear and monobranched alkanes, but fully excludes their dibranched isomers. Adsorption sites of alkanes within the MOF channels have been identified by single-crystal X-ray diffraction studies, and the adsorption mechanism was explored through computational calculations and modeling. The highly selective adsorption of the MOF should be attributed to its optimal pore dimensions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

A numerical study of the flow establishment time in hypersonic shock tunnels

This paper presents a numerical study of unsteady hypersonic viscous flows in 2D hypersonic shock tunnels. The numerical experiments on the combined nozzle/model flows, utilizing the configurations mounted in the test section of a 14.7-long shock tunnel, which has a design Mach number of Me = 6 and a stagnation temperature of T(0) = 3063 R, have been performed by solving the 2D Navier-Stokes equations with an ADI-type TVD scheme. The flow establishment times around aerodynamic models, such as a flat plate, a biconvex airfoil, thin and thick double wedges, and a circular cylinder, are calculated and compared. The analysis shows that, for the most severely separated case of a circular cylinder, the flow becomes stabilized within about 8 msec including the starting process, and its nondimensional flow establishment time is 46. The flow establishment time increases with increasing length of the separated region and decreases with increasing freestream velocity.

Lee, Jang-Yeon↗
NASA NTRS2013

An Application of UAV Attitude Estimation Using a Low-Cost Inertial Navigation System

Unmanned Aerial Vehicles (UAV) are playing an increasing role in aviation. Various methods exist for the computation of UAV attitude based on low cost microelectromechanical systems (MEMS) and Global Positioning System (GPS) receivers. There has been a recent increase in UAV autonomy as sensors are becoming more compact and onboard processing power has increased significantly. Correct UAV attitude estimation will play a critical role in navigation and separation assurance as UAVs share airspace with civil air traffic. This paper describes attitude estimation derived by post-processing data from a small low cost Inertial Navigation System (INS) recorded during the flight of a subscale commercial off the shelf (COTS) UAV. Two discrete time attitude estimation schemes are presented here in detail. The first is an adaptation of the Kalman Filter to accommodate nonlinear systems, the Extended Kalman Filter (EKF). The EKF returns quaternion estimates of the UAV attitude based on MEMS gyro, magnetometer, accelerometer, and pitot tube inputs. The second scheme is the complementary filter which is a simpler algorithm that splits the sensor frequency spectrum based on noise characteristics. The necessity to correct both filters for gravity measurement errors during turning maneuvers is demonstrated. It is shown that the proposed algorithms may be used to estimate UAV attitude. The effects of vibration on sensor measurements are discussed. Heuristic tuning comments pertaining to sensor filtering and gain selection to achieve acceptable performance during flight are given. Comparisons of attitude estimation performance are made between the EKF and the complementary filter.

Eure, Kenneth W.↗
NASA NTRS1982

Materials processing in space

Processing-refining of raw materials from extraterrestrial sources is detailed for a space materials handling facility. The discussion is constrained to those steps necessary to separate desired components from raw or altered input ores, semi-purified feedstocks, or process scrap and convert the material into elements, alloys, and consumables. The materials are regarded as originating from dead satellites and boosters, lunar materials, and asteroids. Strong attention will be given to recycling reagent substances to avoid the necessity of transporting replacements. It is assumed that since no aqueous processes exist on the moon, the distribution of minerals will be homogeneous. The processing-refining scenario will include hydrochemical, pyrochemical, electrochemical, and physical techniques selected for the output mass rate/unit plant mass ratio. Flow charts of the various materials processing operations which could be performed with lunar materials are provided, noting the necessity of delivering several alloying elements from the earth due to scarcities on the moon.

Waldron, R. D.↗
NASA NTRS1980

A software-based system which produces SEASAT SAR imagery

A digital processing algorithm and its associated system design for producing images from SEASAT synthetic aperture radar (SAR) data is described. The proposed system uses the fast Fourier transform approach to perform the two dimensional correlation process. The range migration problem can be alleviated by approximating the locus of echoes from a point target by several linear segments. Data corresponding to each segment are correlated separately and the results are coherently summed to produce full resolution images. This processing approach exhibits high computation efficiency and simple processing control functions. It is particularly attractive for software implementation based on general purpose computers. Results of this implementation and examples of digitally correlated SEASAT SAR imagery are discussed.

Wu, C.↗
DOE OSTI2026

Towards the Ultimate Strength of Medium‐Entropy Alloys Through Pulsed Lasers

The tensile strength of metals at extreme strain rates is a key predictor of their performance in ballistic and structural impact applications. An important experimental method to reach these extreme strain rates is the use of high-amplitude, short-duration pulsed lasers. The Jupiter Laser Facility at the Lawrence Livermore National Laboratory enabled probing for the first time the mechanical response of several promising High Entropy Alloys at times on the order of nanoseconds (strain rates of ∼10 7 and ∼10 9 s −1 ). The measured strength is in the range of 6 to 10 GPa, ten times the quasistatic value. The mechanisms of plastic deformation and failure were identified and quantified through analysis and molecular dynamics simulation. The reflected wave amplitudes, obtained by VISAR, were used to determine the tensile (spall) stress. The high tensile strength obtained is due to two factors: the strain-rate dependence of plastic flow and the kinetics of void nucleation, growth, and coalescence. The experimental results are compared with an analytical prediction considering both grain-interior and grain-boundary void initiation. Molecular dynamics simulations, conducted at strain rates of 10 8 and 10 9 s −1 , rationalize the experimental results. In conclusion, they provide valuable information about the process of failure evolution, and reveal that grain boundary separation plays a pivotal role in spalling.

Materials science↗
DOE OSTI2020

Covalency in Actinide Compounds

Covalency in actinides has emerged as a resounding research topic on account of the technological importance in separating minor actinides from lanthanides for spent nuclear fuel processing, and utilization of their distinct bonding properties has been realized as a route towards overcoming this challenge. Because of the limited radial extent of the 4f orbitals, there is almost no 4f electron participation in bonding in lanthanides; this is not the case for the actinides, which have extended 5f orbitals that are capable of overlapping with ligand orbitals, although not to the degree of overlap as in the d orbitals of transition metals. In this concept paper, we provide a general description of covalency in actinide compounds. After introducing two main approaches to enhance covalency, either by exploiting increased orbital overlap or decreasing energy differences between the orbitals causing orbital energy degeneracy, we show the current state of the field using several examples from the recent literature. Here, we will conclude by proposing the use of actinide chalcogenides as a convenient auxiliary tool to study covalency in actinide compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nonaxisymmetric Shapes of Biological Membranes from Locally Induced Curvature

In various biological processes such as endocytosis and caveolae formation, the cell membrane is locally deformed into curved morphologies. Previous models to study membrane morphologies resulting from locally induced curvature often only consider the possibility of axisymmetric shapes-an indeed unphysical constraint. Past studies predict that the cell membrane buds at low resting tensions and stalls at a flat pit at high resting tensions. In this work, we lift the restriction to axisymmetry to study all possible membrane morphologies. Only if the resting tension of the membrane is low, we reproduce axisymmetric membrane morphologies. When the resting tension is moderate to high, we show that 1) axisymmetric membrane pits are unstable and 2) nonaxisymmetric ridge-shaped structures are energetically favorable. Furthermore, we find the interplay between intramembrane viscous flow and the rate of induced curvature affects the membrane's ability to transition into nonaxisymmetric ridges and axisymmetric buds. In particular, we show that axisymmetric buds are favored when the induced curvature is rapidly increased, whereas nonaxisymmetric ridges are favored when the curvature is slowly increased. Overall, our results hold relevant implications for biological processes such as endocytosis and physical phenomena like phase separation in lipid bilayers.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Dual aggregation steering in bulk-heterojunction via solvent engineering toward efficient and stable binary organic solar cells

In high-performance organic solar cells (OSCs), efficient charge transport hinges on a well-optimized morphology of the photoactive layer, which depends critically on controlled aggregation and favorable interactions between donor and acceptor materials. In this work, we introduce a cascade solvent system comprising high-boiling-point ethylbenzene (EB) and low-boiling-point chloroform (CF) to finely tune the aggregation behavior of the D18 donor and L8-BO acceptor. The incorporation of EB not only promotes the H-aggregation of D18 and the J-aggregation of L8-BO but also facilitates the formation of ideal nanoscale phase separation, thereby suppressing bimolecular recombination. As a result, devices processed with the EB/CF solvent blend achieve a best power conversion efficiency (PCE) of 19.6 % and enhanced operational stability, outperforming those fabricated with pure CF (17.1 %). In conclusion, this study offers a reliable and effective strategy for optimizing donor and acceptor aggregation, providing a viable pathway toward higher-performance OSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dissolution of periodic arrays of grains: Upscaling of pore-scale simulations with fast reactions

Upscaling methods are frequently used to derive transport equations at the macroscopic scale from more fundamental equations formulated at the pore scale. These methods typically give a suitable structure for the macroscopic equations and can also provide explicit expressions for the constitutive parameters, such as permeability and dispersion coefficients. Introducing chemical reactions complicates upscaling in at least two important ways. First, the interplay between chemical reactions and transport processes introduces a new length scale, which can be much smaller than the convective or dispersive length scales. A small reactive length scale breaks one of the key assumptions in upscaling; that there is a significant separation in length between the pore-scale and macro-scale processes. The second complication is that if reactions take place at mineral surfaces (dissolution or precipitation) then the pore space itself is evolving in time. In this paper we suggest ways in which these difficulties can be approached, based on analysis of pore-scale simulation data. First, we noticed that the concentration field in successive unit cells has an almost identical spatial variation, with a single scaling factor for each unit cell that is proportional to the incoming reactant flux. Using pore-scale simulations to determine the mass transfer coefficient in a few unit cells, we can calculate the concentration field in the whole domain, even when dissolution is entirely transport limited. Second, we have noticed a time-dependent mapping of the grain shapes from different unit cells. From these observations, we can deduce constitutive relations where the only time-varying parameter is the porosity. Here, we show that a model based on these ideas can quantitatively account for the pore-scale simulation data.

58 GEOSCIENCES↗
DOE OSTI2020

Innovative high-temperature ammonium bifluoride fusion and rapid analysis of elements with nuclear forensic value

High-temperature ammonium bifluoride (ABF) fusions were evaluated for potential use in rapid dissolution of post-detonation nuclear debris. The ABF fusion was carried out in a Pt crucible which allowed evaluation of higher fusion and evaporation temperatures. The high-temperature ABF fusion dissolution method was evaluated using geological reference materials: USGS QLO-1a Quartz Latite, USGS SDC-1 Mica Schist, and NIST 278 Obsidian Rock. The optimized dissolution method involved a 10 min fusion at 540 °C, a 5 min reflux in 8 M HNO 3 , an evaporation at 300 °C and final dilution into 45 mL of 2% (v/v) HNO3. The final solution was filtered after heating at 105 °C using a hotblock. This dissolution method was simple, requiring only a hotplate or hotblock, filtered samples were available for ICP-MS analysis or radiochemical separation within 150 min, and was found to have high (>90%) recovery for many isotopes of interest in nuclear forensics applications. U and Pu in the dissolved material was separated using TEVA and UTEVA extraction chromatography columns, a process which resulted in >90% recovery. An irradiated U tracer was spiked into the material prior to dissolution and analyzed for recovery of major fission products and 239Np. The monitored radionuclides had recoveries of greater than 90%, except for the volatile radioiodine isotopes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Binding the Power of Cycloaddition and Cross-Coupling in a Single Mechanism: An Unexpected Bending Journey to Radical Chemistry of Butadiynyl with Conjugated Dienes

What if an experiment could combine the power of cycloaddition and cross-coupling with the in situ formation of an aromatic molecule in a single collision? Crossed molecular beam experiments augmented with electronic structure and statistical calculations provided compelling evidence on a novel radical route involving 1,3-butadiynyl (HCCCC; X 2 Σ + ) radicals synthesizing (substituted) arylacetylenes in the gas phase upon reactions with 1,3-butadiene (CH 2 CHCHCH 2 ; X 1 Ag) and 2-methyl-1,3-butadiene (isoprene; CH 2 C(CH 3 )CHCH 2 ; X 1 A'). Furthermore, this elegant mechanism de facto merges two previously disconnected concepts of cross-coupling and cycloaddition–aromatization in a single collision event via the formation of two new C(sp 2 )–C(sp 2 ) bonds and bending the 180° moiety of the linear 1,3-butadiynyl radical out of the ordinary by 60° to 120°. In addition to its importance to fundamental organic chemistry, this unconventional mechanism links two previously separated routes of gas-phase molecular mass growth processes of polyacetylenes and polycyclic aromatic hydrocarbons (PAHs), respectively, in low-temperature environments such as in cold molecular clouds like the Taurus Molecular Cloud (TMC-1) and in hydrocarbon-rich atmospheres of planets and their moons such as Titan, what revises the established understanding of low-temperature molecular mass growth processes in the Universe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Modifying Ionogel Solid-Electrolytes for Complex Electrochemical Systems

The solution processability of ionogel solid electrolytes has recently garnered attention in the Li-ion battery community as a means to address the interface and fabrication issues commonly associated with most solid electrolytes. However, the trapped ionic liquid (ILE) component has hindered the electrochemical performance. In this report we present a process to tune the properties by replacing the ILE in a silica-based ionogel after fabrication with a liquid component befitting the desired application. Electrochemical cycling under various conditions showcases gels containing different liquid components incorporated into LiFePO4 (LFP)/gel/Li cells: high power (455 W kg –1 at a 1 C discharge) systems using carbonates, low temperatures (-40 °C) using ethers, or high temperatures (100 °C) using ionic liquids. Fabrication of additive-manufactured cells utilizing the exchanged carbonate-based system is demonstrated in a planar LFP/Li 4 Ti 5 O 12 (LTO) system, where a marked improvement over an ionogel is found in terms of rate capability, capacity, and cycle stability (118 vs 41 mA h g –1 at C/4). This process represents a promising route to create a separator-less cell, potentially in complex architectures, where the electrolyte properties can be facilely tuned to meet the required conditions for a wide range of battery chemistries while maintaining a uniform electrolyte access throughout cast electrodes.

25 ENERGY STORAGE↗
DOE OSTI2025

Atomically Fine-Tuning Organic–Inorganic Carbon Molecular Sieve Membranes for Hydrogen Production

Polymeric membranes with great processability are attractive for the H 2 /CO 2 separation required for hydrogen production from renewable biomass with carbon capture for utilization and sequestration. However, it remains elusive to engineer polymer architectures to obtain desired sub-3.3 Å ultramicropores to efficiently sieve H 2 from CO 2 . Herein, we demonstrate a scalable way of carbonizing polybenzimidazole (PBI) at low temperatures, followed by vapor phase infiltration (VPI) to atomically narrow ultramicropores throughout the films, forming hybrid organic–inorganic carbon molecular sieves (CMSs). One VPI cycle (100 s) for the PBI carbonized at 500 °C remarkably increases H 2 /CO 2 selectivity from 9.6 to 83 at 100 °C, surpassing Robeson’s upper bound. The CMS demonstrates a stable H 2 /CO 2 separation performance when challenged with simulated syngas streams and can be fabricated into thin-film composite membranes, outperforming state-of-the-art membranes. Finally, the scalable approach can be ubiquitous to molecularly fine-tune ultramicropores of leading polymeric membranes to further improve their size-sieving ability and thus separation efficiency.

36 MATERIALS SCIENCE↗