Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “response surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Solar Effects on Climate and the Maunder Minimum: Minimum Certainty

The current state of our understanding of solar effects on climate is reviewed. As an example of the relevant issues, the climate during the Maunder Minimum is compared with current conditions in GCM simulations that include a full stratosphere and parameterized ozone response to solar spectral irradiance variability and trace gas changes. The GISS Global Climate/Middle Atmosphere Model coupled to a q-flux/mixed layer model is used for the simulations, which begin in 1500 and extend to the present. Experiments were made to investigate the effect of total versus spectrally-varying solar irradiance changes; spectrally-varying solar irradiance changes on the stratospheric ozone/climate response with both pre-industrial and present trace gases; and the impact on climate and stratospheric ozone of the preindustrial trace gases and aerosols by themselves. The results showed that: (1) the Maunder Minimum cooling relative to today was primarily associated with reduced anthropogenic radiative forcing, although the solar reduction added 40% to the overall cooling. There is no obvious distinguishing surface climate pattern between the two forcings. (2)The global and tropical response was greater than 1 C, in a model with a sensitivity of 1.2 C per W m-2. To reproduce recent low-end estimates would require a sensitivity 1/4 as large. (3) The global surface temperature change was similar when using the total and spectral irradiance prescriptions, although the tropical response was somewhat greater with the former, and the stratospheric response greater with the latter. (4) Most experiments produce a relative negative phase of the NAO/AO during the Maunder Minimum, with both solar and anthropogenic forcing equally capable, associated with the tropical cooling and relative poleward EP flux refraction. (5) A full stratosphere appeared to be necessary for the negative AO/NAO phase, as was the case with this model for global warming experiments, unless the cooling was very large, while the ozone response played a minor role and did not influence surface temperature significantly. (6) Stratospheric ozone was most affected by the difference between present day and preindustrial atmospheric composition and chemistry, with increases in the upper and lower stratosphere during the Maunder Minimum. While the estimated UV reduction led to ozone decreases, this was generally less important than the anthropogenic effect except in the upper middle stratosphere, as judged by two different ozone photochemistry schemes. (7) The effect of the reduced solar irradiance on stratospheric ozone and on climate was similar in Maunder Minimum and current atmospheric conditions.

Rind, David↗
NASA NTRS2003

Two Paths from the Same Place: Task Driven and Human Centered Evolution of a Group Information Surface

This is the tale of two different implementations of a collaborative information tool, that started from the same design source. The Blueboard, developed at IBM Research, is a tool for groups to use in exchanging information in a lightweight, informal collaborative way. It began as a large display surface for walk-by use in a corporate setting and has evolved in response to task demands and user needs. At NASA, the MERBoard is being designed to support surface operations for the upcoming Mars Exploration Rover Missions. The MERBoard is a tool that was inspired by the Blueboard design, extending this design to support the collaboration requirements for viewing, annotating, linking and distributing information for the science and engineering teams that will operate two rovers on the surface of Mars. The ways in which each group transformed the system reflects not only technical requirements, but also the needs of users in each setting and embedding of the system within the larger socio-technical environment. Lessons about how task requirements, information flow requirements and work practice drive the evolution of a system are illustrated.

Russell, Daniel M.↗
DOE OSTI2024

Optimized piston temperature control in gaseous fuel hydrogen engine system

Operating a gaseous fuel engine system includes combusting a mixture containing a gaseous hydrogen fuel and air in a cylinder of an engine, varying an operating parameter of the engine to which a crown surface temperature of a piston within the cylinder is responsive, and populating a temperature model based on a value of the varied operating parameter. Operating a gaseous fuel engine system further includes operating an oil spray apparatus to spray oil onto the piston based on the populated temperature model, and maintaining the crown surface temperature of the piston between a high temperature limit and a pre-ignition mitigation temperature limit based on the operating of the oil spray apparatus. Related apparatus and control logic is also disclosed.

Bochart, Michael R.↗
NASA NTRS1974

Development and application of ride-quality criteria

A program for the development of ride-quality vibration criteria applicable to the design and evaluation of air and surface transportation systems is described. Consideration is given to the magnitude of vehicle vibration experienced by the passenger, the frequency of vibration, the direction of vibration, and the influence of seat dynamics on passenger response. Comparative vibration measurements are presented for a variety of air and surface transportation systems. In addition, simulator data on seat dynamics and passenger response are presented. Results suggest the relative merits of various physical descriptors and measurement locations for characterizing the vibration in terms suitable for the design and/or evaluation of transportation systems.

Stephens, D. G.↗
NASA NTRS1976

A fractographic study of the edge-sliding mode in fracture toughness testing

A fractographic study of Mode II fracture surfaces has been conducted for the purpose of identifying the microstructural mechanisms responsible for fracture in the edge-sliding mode. A compact shear (CS) specimen was employed to generate the fracture surfaces and also to establish Mode II fracture toughness values for Ti-6Al-4V, A533-B steel, and several aluminum alloys. In all tests, one of the two edge cracks sustained complete Mode II fracture while the other exhibited only a limited amount of subcritical crack growth. Mode II fracture surfaces, which were unique in appearance, have been examined by optical and scanning electron microscopy. It was determined that shear (or parabolic) microvoid coalescence was the dominant mechanism for Mode II fracture. It was also established that most of the surface abrasions were created by the relative sliding of the fracture surfaces during unstable fracture rather than the crack initiation process.

Jones, D. L.↗
NASA NTRSDate not supplied

Using Coordinated, Multi-Agent Platforms for Dynamic Ocean Worlds Science

Planetary science missions have the opportunity to enhance science return through deployment of autonomous capabilities designed to dynamically respond to new information. Future outer solar system missions to ocean worlds in particular would benefit from this technology - intelligent science payloads (ISP) - because it would allow for a coordinated, near real-time response to ephemeral ‘events’ such as plumes, tectonism, surface implantation, volatile releases, thermal and magnetic anomalies, or radiation, as well as increasing the cadence and coverage of data collection. Prioritization and decision-making frameworks from ISP could be deployed at various scales - from analysis onboard a spacecraft with multiple instruments – to coordinated analyses among separate spacecraft in an e.g., distributed systems mission (DSM) composed of multiple SmallSats. Goddard’s Intelligent Science Payload team is developing an agile autonomous architecture for an icy ocean worlds DSM concept. Our goals are to coordinate data collection and onboard data analysis, and to make autonomous decisions for new data collection and analysis based on science priorities between multiple spacecraft with variable instrumentation and orbits. We use a range of data analysis tools to coordinate the DSM response, spanning from observations of data over a specified threshold to more computationally intensive machine learning algorithms (ML). ML algorithms here currently focus on determining the composition of an ocean world using mass spectrometry, and specifically methods for understanding ‘novelties’ and potential biosignatures. These algorithms could be used to quickly process and analyze onboard data that would be significantly delayed in downlink due to long communication delays for outer solar system missions in order to make dynamic science observations. Our ocean worlds case study ISP architecture is intended as an ‘agile’ and modular framework that could be used as a whole or as particular modules based on mission needs.

Distributed Systems↗
DOE OSTI2023

Energetics of silicon in the bulk and near surfaces of tungsten: a first-principles study

Abstract Siliconization of the tokamak walls is a candidate method to improve plasma confinement in fusion tokamaks containing tungsten plasma facing components (W PFCs). To understand the interactions of silicon (Si) with W, the Si behavior in bulk W, and near three low-index W surfaces ((100), (110) and (111)) has been investigated using first-principles density functional theory. In bulk W, Si interstitial atoms have a low solution ability and high mobility, and Si atoms can be strongly trapped by W vacancies. The interaction between two Si adatoms is responsible for the stability of adatom superstructures on W surfaces, consistent with previous experimental observation (Tsong and Casanova 1981 Phys. Rev. Lett. 47 113). Although the coverage dependence of Si adsorption and diffusion energetics on surfaces is related to surface orientation, the W(110) surface has lower Si adsorption affinity and higher Si diffusivity than either the W(111) or W(100) surfaces. The most stable Si adatom superstructure on W surfaces is: square c(2 × 2) pattern on W(100) covered with 0.5 ML Si; rectangular c(4 × 2) pattern on W(110) with 0.25 ML Si; and rhombus p(1 × 1) pattern on W(111) with 1 ML Si. The coverage dependence of Si mobility on/toward W surfaces is generally related to the stability of the Si superstructures as a function of coverage on each surface. Interestingly, Si adatoms prefer to transport below the surface and into W subsurface by an exchange mechanism with W atoms, indicating the likelihood of epitaxial growth of W silicide layers on W surfaces during the operation of W PFCs.

Yang, L. (ORCID:0000000322166071)↗
NASA NTRS1995

Measurement of Gust Response on a Turbine Cascade

The paper presents benchmark experimental data on a gust response of an annular turbine cascade. The experiment was particularly designed to provide data for comparison with the results of a typical linearized gust-response analysis. Reduced frequency, Mach number, and incidence were varied independently. Except for the lowest reduced frequency, the gust velocity distribution was nearly sinusoidal. For the high inlet-velocity series of tests, the cascade was near choking. The mean flow was documented by measuring blade surface pressures and the cascade exit flow. High-response pressure transducers were used to measure the unsteady pressure distribution. Inlet-velocity components and turbulence parameters were measured using hot wire. In addition to the synchronous time-average pressure spectra, typical power spectra are included for several representative conditions.

Kurkov, A. P.↗
DOE OSTI2025

Cloud-atmosphere impacts on the central Arctic surface energy budget (Final Report)

This project investigated how clouds and atmosphere-sea ice interactions shape the central Arctic surface energy budget using observations from the MOSAiC expedition and coordinated model experiments. Analyses focused on three themes. First, a new method applied to thermistor string data revealed that snow thermal conductivity is systematically higher than assumed in most models, strongly influencing conductive heat flux and sea ice growth, especially under clear skies. Second, a full annual cycle of surface energy budget observations, combined with detailed cloud microphysical retrievals, demonstrated how cloud regimes regulate radiative, turbulent, and conductive fluxes, driving seasonal contrasts in sea ice energy balance: in winter, radiative forcing elicits strong turbulent and conductive responses, while in summer excess energy is primarily partitioned into surface melt. Third, these observations were used to evaluate and improve regional and global forecast models. While some models captured key Arctic cloud-radiation states, most exhibited persistent deficiencies in representing liquid-containing clouds, snow-on-sea-ice processes, and flux responses to radiative forcing. Together, these results provide unprecedented benchmarks for understanding coupled Arctic processes, improve parameterizations of snow, sea ice, and cloud interactions, and highlight critical pathways by which atmospheric variability drives sea ice change in a rapidly evolving Arctic system. Lastly, the project was a resounding success, resulting in 38 peer-reviewed publications and dozens of presentations, while also supporting an early career scientist.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1999

Inlet Flow Distortion and Unsteady Blade Response in a Transonic Axial-Compressor Rotor

This paper describes the unsteady blade surface pressures on the first-stage rotor blades of a two-stage transonic axial flow compressor experiencing inlet flow distortion. This study was conducted to demonstrate the ability of a full annulus unsteady Reynolds-averaged Navier-Stokes numerical technique to predict unsteady pressures on the rotor blades operating in a distorted inflow. A total pressure distortion produced by a variable mesh screen mounted near the inlet was used to excite the unsteady blade loading on the rotor. On-blade pressure transducers were used to measure the unsteady blade surface pressure. These pressures and the resulting transient load on the rotor blades were compared to the numerical prediction. It is important to develop numerical techniques to predict these transient loads to better understand the response of compressor blades to forcing functions. With this enhanced understanding and ability to predict these transient forces, more robust compressors can be developed. In the study, a high definition of the inlet flow distortion was achieved by rotating the distortion screens. In this manner the inlet flow distortion and the distortion at the first stage stator leading edge were measured at approximately every 0.7 degrees. This full annulus high definition of the inlet flow distortion was used as the inlet boundary condition for the numerical technique. The experimental measurements and numerical analyses are highly complementary in this study. Detailed comparisons between the measurements and the numerical analyses indicate that the current numerical procedure calculates the unsteady aerodynamic pressure on the blade surfaces reasonably well. Further, the agreement of the measured and predicted rotor exit flow distortion at the first stage stator leading edge provides verification of the numerical technique.

Rabe, D. C.↗
NASA NTRS2015

Flexible Hybrid Battery/Pseudocapacitor

Batteries keep devices working by utilizing high energy density, however, they can run down and take tens of minutes to hours to recharge. For rapid power delivery and recharging, high-power density devices, i.e., supercapacitors, are used. The electrochemical processes which occur in batteries and supercapacitors give rise to different charge-storage properties. In lithium ion (Li+) batteries, the insertion of Li+, which enables redox reactions in bulk electrode materials, is diffusion controlled and can be slow. Supercapacitor devices, also known as electrical double-layer capacitors (EDLCs) store charge by adsorption of electrolyte ions onto the surface of electrode materials. No redox reactions are necessary, so the response to changes in potential without diffusion limitations is rapid and leads to high power. However, the charge in EDLCs is confined to the surface, so the energy density is lower than that of batteries.

Tucker, Dennis S.↗
NASA NTRS2024

Forced Response Aeromechanics Analysis in MATLAB®-Based Environment Code With Application to Distortion-Tolerant Fan R24 Blade Geometry

Researchers at the NASA Glenn Research Center have developed a research-level code for forced response analysis for turbomachinery that provides a streamlined framework for aeromechanics analysis, as well as for generating Goodman diagrams. The Forced Response Aeromechanics Analysis in a MATLAB-Based Environment (FRAAME, Version 1) code is designed to accept blade surface unsteady pressure time histories generated by three-dimensional (3D) Unsteady Reynolds-Averaged Navier-Stokes (URANS) code TURBO and modal displacements, modal stresses, and static stresses generated via expanded ANSYS® (Ansys, Inc.) cyclic symmetry analysis. The code’s looping structure allows for largescale analyses, including many blade surface pressure files, modal displacements, and modal stress files for full annulus forced response analysis, including a modal summation method for multiple engine orders and modes. This code is applied to the R24 fan geometry for the Boundary Layer Ingesting Inlet/Distortion-Tolerant Fan (BLI2DTF) project, a propulsion system being developed to increase the fuel efficiency of future aircraft, to serve as validation of experimental data as well as external simulation results. This tool’s functional, modular form is intended to allow users to make modifications easily. Those modifications can include requests for information for any step in the analysis process, as well as adding various functions to compute additional information of interest. It is also written, given sufficient input information, as a general blade geometry forced response solver that is not necessarily specific to the R24 geometry but is used here for verification of code functionality and accuracy. Although forced response analysis tools are also available in commercially available code packages, the post-processing FRAAME code offers reliable, fast, and scalable forced response analysis and Goodman diagram generation for large cases utilizing, specifically, TURBO and ANSYS® results information in an effort to streamline forced response and high cycle fatigue analyses.

Aeromechanics↗
NASA NTRS1993

On the response of the tropical atmosphere to large-scale deforestation

Recent studies on the Amazon deforestation problem predict that removal of the forest will result in a higher surface temperature, a significant reduction in evaporation and precipitation, and possibly significant changes in the tropical circulation. Here, we discuss the basic mechanisms contributing to the response of the tropical atmosphere to deforestation. A simple linear model of the tropical atmosphere is used in studying the effects of deforestation on climate. It is suggested that the impact of large-scale deforestation on the circulation of the tropical atmosphere consists of two components: the response of the tropical circulation to the negative change in precipitation (heating), and the response of the same circulation to the positive change in surface temperature. Owing to their different signs, the changes in predicted temperature and precipitation excite competing responses working in opposite directions. The predicted change in tropical circulation determines the change, if any, in atmospheric moisture convergence, which is equivalent to the change in run-off. The dependence of run-off predictions on the relative magnitudes of the predicted changes in precipitation and surface temperature implies that the predictions about run-off are highly sensitive, which explains, at least partly, the disagreement between the different models concerning the sign of the predicted change in Amazonian run-off.

Eltahir, E. A. B.↗
NASA NTRS1973

A study of the effect of a boundary layer profile on the dynamic response and acoustic radiation of flat panels

The response of a thin, elastic plate to a harmonic force which drives the plate from below and a compressible air stream with a viscous boundary layer flowing parallel to the upper surface along the length was investigated. Equations governing the forced response of the coupled plate-aerodynamic system are derived along with appropriate boundary conditions. Calculations of basic solution parameters for a linear velocity profile and for a Blasius profile showed that the same system response could be obtained from each profile if appropriate values of boundary layer thickness were chosen for each profile.

Mixson, J. S.↗
NASA NTRS2005

Closed Loop Active Flow Separation Detection and Control in a Multistage Compressor

Active closed loop flow control was successfully demonstrated on a full annulus of stator vanes in a low speed axial compressor. Two independent methods of detecting separated flow conditions on the vane suction surface were developed. The first technique detects changes in static pressure along the vane suction surface, while the second method monitors variation in the potential field of the downstream rotor. Both methods may feasibly be used in future engines employing embedded flow control technology. In response to the detection of separated conditions, injection along the suction surface of each vane was used. Injected mass flow on the suction surface of stator vanes is known to reduce separation and the resulting limitation on static pressure rise due to lowered diffusion in the vane passage. A control algorithm was developed which provided a proportional response of the injected mass flow to the degree of separation, thereby minimizing the performance penalty on the compressor system.

Bright, Michelle M.↗
NASA NTRS2012

Estimating Sea Surface Salinity and Wind Using Combined Passive and Active L-Band Microwave Observations

Several L-band microwave radiometer and radar missions have been, or will be, operating in space for land and ocean observations. These include the NASA Aquarius mission and the Soil Moisture Active Passive (SMAP) mission, both of which use combined passive/ active L-band instruments. Aquarius s passive/active L-band microwave sensor has been designed to map the salinity field at the surface of the ocean from space. SMAP s primary objectives are for soil moisture and freeze/thaw detection, but it will operate continuously over the ocean, and hence will have significant potential for ocean surface research. In this innovation, an algorithm has been developed to retrieve simultaneously ocean surface salinity and wind from combined passive/active L-band microwave observations of sea surfaces. The algorithm takes advantage of the differing response of brightness temperatures and radar backscatter to salinity, wind speed, and direction, thus minimizing the least squares error (LSE) measure, which signifies the difference between measurements and model functions of brightness temperatures and radar backscatter. The algorithm uses the conjugate gradient method to search for the local minima of the LSE. Three LSE measures with different measurement combinations have been tested. The first LSE measure uses passive microwave data only with retrieval errors reaching 1 to 2 psu (practical salinity units) for salinity, and 1 to 2 m/s for wind speed. The second LSE measure uses both passive and active microwave data for vertical and horizontal polarizations. The addition of active microwave data significantly improves the retrieval accuracy by about a factor of five. To mitigate the impact of Faraday rotation on satellite observations, the third LSE measure uses measurement combinations invariant under the Faraday rotation. For Aquarius, the expected RMS SSS (sea surface salinity) error will be less than about 0.2 psu for low winds, and increases to 0.3 psu at 25 m/s wind speed for warm waters (25 C). To achieve the required 0.2 psu accuracy, the impact of sea surface roughness (e.g. wind-generated ripples) on the observed brightness temperature has to be corrected to better than one tenth of a degree Kelvin. With this algorithm, the accuracy of retrieved wind speed will be high, varying from a few tenths to 0.6 m/s. The expected direction accuracy is also excellent (less than 10 ) for mid to high winds, but degrades for lower speeds (less than 7 m/s).

Yueh, Simon H.↗
NASA NTRS1986

Directional reflectance response in AVHRR red and near-IR bands for three cover types and varying atmospheric conditions

Surface directional red and near-infrared reflectances of bare soil, orchard grass, and fescue were extracted from a multitemporal data set to correspond to NOAA-7 Advanced Very High Resolution Radiometer (AVHRR) scanning and illumination geometry at 30 deg latitude. Radiances were simulated at satellite altitude and a ratio vegetation index was calculated. The results show that off-nadir directional reflectance measured at the surface in the red and near-IR portions of the spectrum are approximately maintained with AVHRR viewing and illumination characteristics. The two-channel reflectance response is such that the ratio vegetation index is more constant with scan angle and atmospheric conditions than individual channels. It is shown that inclusion of atmospheric and surface reflectance data can greatly improve interpretation of AVHRR data, when knowledge of the range of atmospheric conditions and approximate directional reflectances of major cover types are known.

Holben, B.↗
NASA NTRS1992

Electrostatic effects on dust particles in space

The star scanner of the Magellan spacecraft experienced operational anomalies continuously during Magellan's journey to Venus. These anomalies were attributed to the presence of dust particles in the vicinity of the spacecraft. The dust particles, which were originated from the surface of thermal blankets, were liberated when the electrostatic force acting on them was of sufficient magnitude. In order to verify this hypothesis, an experimental program was initiated to study the mechanisms responsible for the release of dust particles from a spacecraft surface. In the experiments, dust particles were immersed in a plasma and/or subjected to ultra-violet irradiation. Results showed that the charging state of a dust particle was strongly dependent on the environment, and the charge on a dust particle was approximately 10(exp 3) elementary charges. Consequently, in the space environment, electrostatic force could be the most dominant force acting on a dust particle.

Leung, Philip↗