Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “program benefits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

FINAL SCIENTIFIC/TECHNICAL REPORT: Dry Solids Pump - Coal Feed Technologies

Gas Technology Institute (GTI) has concluded the Dry Solids Pump Coal - Feed Technologies (DSP-CFT) program that was initiated on October 1, 2013. The project’s primary objectives have been to gather data to increase the fidelity of the economic benefits of the Dry Solids Pump (DSP) technology for Integrated Gasification Combined Cycle (IGCC) plants, mature the technology to a Technology Readiness Level (TRL) of TRL 6 by continued testing and upgrades to the existing DSP, advance pump configuration knowledge to the point that a commercial pump can be confidently designed for low rank coal feed stocks and develop the next generation design configuration of a 1000 ton per day (tpd) DSP. After initial efforts with the existing DSP, a subscale pump was built to reduce the cost and time required to develop upgrades. The subscale development program evaluated three exit configurations and a host of geometric variations in each configuration concluding a side exit upward discharge configuration offered the greatest improvements. Both configuration and operation focused improvements were implemented on the full scale existing DSP and demonstrated 500 psi operation. An initial Techno-economic Analysis (TEA) and later update that was undertaken by Mr. Chris Higman and associates. The TEA quantifies the dramatic savings in capital and operational expenses achieved by reducing plant height and nitrogen consumption/compression, respectively in a commercial gasifier application. Drawings of the suggested design configuration for a commercial DSP feeder reflect the side exit design and incorporate lighter weight and lower cost fabrication methods. Features used for development testing are removed. A follow-on optimization program to allow the DSP technology to achieve TRL 7 is outlined.

01 COAL, LIGNITE, AND PEAT↗

Explicit model predictive control through robust optimization

A strategy that calculates an explicit state feedback policy to regulate constrained uncertain discrete‐time uncertain linear systems is presented. We consider uncertain processes, affected by box‐bounded multiplicative uncertainty as well as bounded additive uncertainty with linear state and inputs constraints. The proposed method includes (i) the calculation of a terminal set constraint and (ii) the robust reformulation of state constraints in the prediction horizon. These features allow the derivation of the desired policy by solving a single multiparametric quadratic programming problem that guarantees feasible operation in the presence of uncertainty. Additionally, we employ variable and constraint elimination approaches to enhance the computational performance of the strategy. We demonstrate the steps and benefits of these developments with a numerical example and a chemical engineering case study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An efficient data format for mass spectrometry based proteomics

The diverse range of mass spectrometry (MS) instrumentation along with corresponding proprietary and non-proprietary data formats has generated a proteomics community driven call for a standardized format to facilitate management, processing, storing, visualization, and exchange of both experimental and processed data. To date, significant efforts have been extended towards standardizing XML-based formats for mass spectrometry data representation, despite the recognized inefficiencies associated with storing large numeric datasets in XML. The proteomics community has periodically entertained alternate strategies for data exchange, e.g., using a common application programming interface or a database-derived format. However these efforts have yet to garner significant attention, mostly because they haven’t illustrated significant performance benefits over existing standards, but also due to issues such as extensibility to multi-dimensional separation systems, robustness of operation, and incomplete or mismatched vocabulary. Here, we describe a format based on standard database principles that offers multiple benefits over existing formats in terms of storage size, ease of processing, data retrieval times and extensibility to accommodate multi-dimensional separation systems.

99 GENERAL AND MISCELLANEOUS↗

Energy Savings Lifetimes and Persistence

This technical brief explains the concepts of energy savings lifetimes and savings persistence and discusses how program administrators use these factors to calculate savings for efficiency measures, programs and portfolios. Savings lifetime is the length of time that one or more energy efficiency measures or activities save energy, and savings persistence is the change in savings throughout the functional life of a given efficiency measure or activity. Savings lifetimes are essential for assessing the lifecycle benefits and cost effectiveness of efficiency activities and for forecasting loads in resource planning. The brief also provides estimates of savings lifetimes derived from a national collection of costs and savings for electric efficiency programs and portfolios.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Quantifying the Financial Benefits of Multifamily Retrofits

Increasing the adoption of energy efficient building practices will require the energy sector to increase their understanding of the way that retrofits affect multifamily financial performance as well as how those indicators are interpreted by the lending and appraisal industries. This project analyzed building, energy, and financial program data as well as other public and private data to examine the relationship between energy efficiency retrofits and financial performance on three levels: building, city, and community. The project goals were to increase the data and analysis in the growing body of multifamily financial benefits work as well provide a framework for other geographies to produce similar characterization. The goals are accomplished through three tasks. Task one: A pre- and post-retrofit analysis of thirteen Chicago multifamily buildings. Task two: A comparison of Chicago income and expenses to two national datasets. Task three: An in-depth look at multifamily market sales data and the subsequent impact of buildings that undergo retrofits.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A subpolar-focused stratospheric aerosol injection deployment scenario

Stratospheric aerosol injection (SAI) is a prospective climate intervention technology that would seek to abate climate change by deflecting back into space a small fraction of the incoming solar radiation. While most consideration given to SAI assumes a global intervention, this paper considers an alternative scenario whereby SAI might be deployed only in the subpolar regions. Subpolar deployment would quickly envelope the poles as well and could arrest or reverse ice and permafrost melt at high latitudes. This would yield global benefit by retarding sea level rise. Given that effective SAI deployment could be achieved at much lower altitudes in these regions than would be required in the tropics, it is commonly assumed that subpolar deployment would present fewer aeronautical challenges. An SAI deployment intended to reduce average surface temperatures in both the Arctic and Antarctic regions by 2 °C is deemed here to be feasible at relatively low cost with conventional technologies. However, we do not find that such a deployment could be undertaken with a small fleet of pre-existing aircraft, nor that relegating such a program to these sparsely populated regions would obviate the myriad governance challenges that would confront any such deployment. Nevertheless, given its feasibility and potential global benefit, the prospect of subpolar-focused SAI warrants greater attention.

54 ENVIRONMENTAL SCIENCES↗

The NASA high temperature superconductivity program

It has been recognized from the onset that high temperature superconductivity held great promise for major advances across a broad range of NASA interests. The current effort is organized around four key areas: communications and data, sensors and cryogenics, propulsion and power, and space materials technology. Recently, laser ablated YBa2Cu3O(7-x) films on LaAIO produced far superior RF characteristics when compared to metallic films on the same substrate. This achievement has enabled a number of unique microwave device applications, such as low insertion loss phase shifters and high Q filters. Melt texturing and melt quenched techniques are being used to produce bulk materials with optimized magnetic properties. These yttrium enriched materials possess enhanced flux pinning characteristics and will lead to prototype cryocooler bearings. Significant progress has also occurred in bolometer and current lead technology. Studies are being conducted to evaluate the effect of high temperature superconducting materials on the performance and life of high power magneto-plasma-dynamic thrusters. Extended studies were also performed to evaluate the benefit of superconducting magnetic energy storage for LEO space station, lunar and Mars mission applications. The project direction and level of effort of the program are also described.

Sokoloski, Martin M.↗

Locality-Aware Scheduling for Scalable Heterogeneous Environments

Heterogeneous computing promise boost performance of scientific applications by allowing massively parallel execution of computational tasks. However, manually managing extremely heterogeneous, multi-device systems is complicated and may result in sub-optimal performance. Specifically, data management is an extremely challenging problem on multi-device systems. In this work, we introduce two locality-aware schedulers for the Minos Computing Library (MCL), an asynchronous, task-based programming model and runtime for extremely heterogeneous systems. The first scheduler implements a pure locality-aware algorithm to maximize data reuse, though it might incur in ”hot-spots” that limit system utilization. The second scheduler mitigates this drawback by dynamically targeting between locality-awareness and system utilization based on the current workload and available computing devices. Our results show that locality-awareness greatly benefit applications that exhibit data reuse, providing up to 6.9x and 7.9x over the original MCL scheduler and equivalent OpenCL implementations, respectively. Moreover, our schedulers introduce negligible overhead compared with the original MCL scheduler and achieve similar performance for applications that don’t benefit from data locality.

Architecture, co-design, Task-based programming mo↗

Rooftop solar incentives remain effective for low- and moderate-income adoption

Financial incentives for rooftop solar photovoltaic (PV) adoption have declined in the United States over time by policy design. Incentive phase-down can efficiently promote early adoption and avoid ineffective payments to late adopters. Furthermore, incentive phase-down may exclude low- and moderate-income (LMI) households from realizing the same financial benefits from PV adoption as high-income early adopters. Here, data from two state-level LMI PV incentive programs are analyzed to test whether incentives still drive PV adoption among LMI households. As a first order approximation, the analysis suggests that incentives drove adoption that would not otherwise have happened in about 80% of cases. To the extent that policymakers prioritize PV adoption equity as part of the emerging energy justice policy agenda, the results suggest that ongoing incentive support for LMI adoption may be merited.

14 SOLAR ENERGY↗

New trends in hadronic physics at JLab

The 2014-scheduled 12 GeV upgrade of JLab will allow for a whole new range of experiments, extending our knowledge of nucleon structure. The program for the nucleon form factors and elastic scattering parity-violating asymmetry experiments is presented here, along with the benefits of the new large-acceptance forward spectrometer (Super BigBite, SBS) to be installed in Hall A.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TH-EF-BRB-02: Feasibility of Optimization for Dynamic Trajectory Radiotherapy

Purpose: Over the last years, volumetric modulated arc therapy (VMAT) has been widely introduced into clinical routine using a coplanar delivery technique. However, VMAT might be improved by including dynamic couch and collimator rotations, leading to dynamic trajectory radiotherapy (DTRT). In this work the feasibility and the potential benefit of DTRT was investigated. Methods: A general framework for the optimization was developed using the Eclipse Scripting Research Application Programming Interface (ESRAPI). Based on contoured target and organs at risk (OARs), the structures are extracted using the ESRAPI. Sampling potential beam directions, regularly distributed on a sphere using a Fibanocci-lattice, the fractional volume-overlap of each OAR and the target is determined and used to establish dynamic gantry-couch movements. Then, for each gantry-couch track the most suitable collimator angle is determined for each control point by optimizing the area between the MLC leaves and the target contour. The resulting dynamic trajectories are used as input to perform the optimization using a research version of the VMAT optimization algorithm and the ESRAPI. The feasibility of this procedure was tested for a clinically motivated head and neck case. Resulting dose distributions for the VMAT plan and for the dynamic trajectory treatment plan were compared based on DVH-parameters. Results: While the DVH for the target is virtually preserved, improvements in maximum dose for the DTRT plan were achieved for all OARs except for the inner-ear, where maximum dose remains the same. The major improvements in maximum dose were 6.5% of the prescribed dose (66 Gy) for the parotid and 5.5% for the myelon and the eye. Conclusion: The result of this work suggests that DTRT has a great potential to reduce dose to OARs with similar target coverage when compared to conventional VMAT treatment plans. This work was supported by Varian Medical Systems. This work was supported by Varian Medical Systems.

60 APPLIED LIFE SCIENCES↗

Poster - 40: Treatment Verification of a 3D-printed Eye Phantom for Proton Therapy

Purpose: Ocular melanoma is a form of eye cancer which is often treated using proton therapy. The benefit of the steep proton dose gradient can only be leveraged for accurate patient eye alignment. A treatment-planning program was written to plan on a 3D-printed anatomical eye-phantom, which was then irradiated to demonstrate the feasibility of verifying in vivo dosimetry for proton therapy using PET imaging. Methods: A 3D CAD eye model with critical organs was designed and voxelized into the Monte-Carlo transport code FLUKA. Proton dose and PET isotope production were simulated for a treatment plan of a test tumour, generated by a 2D treatment-planning program developed using NumPy and proton range tables. Next, a plastic eye-phantom was 3D-printed from the CAD model, irradiated at the TRIUMF Proton Therapy facility, and imaged using a PET scanner. Results: The treatment-planning program prediction of the range setting and modulator wheel was verified in FLUKA to treat the tumour with at least 90% dose coverage for both tissue and plastic. An axial isotope distribution of the PET isotopes was simulated in FLUKA and converted to PET scan counts. Meanwhile, the 3D-printed eye-phantom successfully yielded a PET signal. Conclusions: The 2D treatment-planning program can predict required parameters to sufficiently treat an eye tumour, which was experimentally verified using commercial 3D-printing hardware to manufacture eye-phantoms. Comparison between the simulated and measured PET isotope distribution could provide a more realistic test of eye alignment, and a variation of the method using radiographic film is being developed.

60 APPLIED LIFE SCIENCES↗

Wind Turbine Manufacturing Process Monitoring

To develop a practical inline inspection that could be used in combination with automated composite material placement equipment to economically manufacture high performance and reliable carbon composite wind turbine blade spar caps. The approach technical feasibility and cost benefit will be assessed to provide a solid basis for further development and implementation in the wind turbine industry. The program is focused on the following technology development: (1) Develop in-line monitoring methods, using optical metrology and ultrasound inspection, and perform a demonstration in the lab. This includes development of the approach and performing appropriate demonstration in the lab; (2) Develop methods to predict composite strength reduction due to defects; and (3) Develop process models to predict defects from leading indicators found in the uncured composites.

17 WIND ENERGY↗

Electronic Safety Resource Tools -- Supporting Hydrogen and Fuel Cell Commercialization

The Pacific Northwest National Laboratory (PNNL) Hydrogen Safety Program conducted a planning session in Los Angeles, CA on April 1, 2014 to consider what electronic safety tools would benefit the next phase of hydrogen and fuel cell commercialization. A diverse, 20-person team led by an experienced facilitator considered the question as it applied to the eight most relevant user groups. The results and subsequent evaluation activities revealed several possible resource tools that could greatly benefit users. The tool identified as having the greatest potential for impact is a hydrogen safety portal, which can be the central location for integrating and disseminating safety information (including most of the tools identified in this report). Such a tool can provide credible and reliable information from a trustworthy source. Other impactful tools identified include a codes and standards wizard to guide users through a series of questions relating to application and specific features of the requirements; a scenario-based virtual reality training for first responders; peer networking tools to bring users from focused groups together to discuss and collaborate on hydrogen safety issues; and a focused tool for training inspectors. Table ES.1 provides results of the planning session, including proposed new tools and changes to existing tools.

08 HYDROGEN↗

An Investigation of Innovative Energy Technologies Entering the Market between 2009-2015, Enabled by EERE-Funded R&D

This report documents technologies that have been commercialized by the private sector and other partners—such as technology developers in startups, companies, and universities—in part because of R&D funding from EERE. It also documents emerging technologies that have the potential to reach the market within the next three years with the support of EERE R&D investments. Commercial and emerging technology tracking in this manner assists EERE technology managers, analysts, communications staff, and senior management in describing and explaining the benefits of EERE-funded research. Policy- and decision-makers would then have the latest information to guide future program development and direction.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Quantification of Energy Savings and Demand Reduction for a Heat Pump Integrated with Thermal Energy Storage (Final Report)

To mitigate the variation in demand on the electric grid, thermal energy storage (TES) is an alternative to electric batteries or installing new peaking power plants. Stakeholders and policy makers across the United States have expressed interests in promoting TES, as demonstrated by the US Department of Energy’s Grid-Interactive Efficient Buildings program and the efforts of various state legislatures. However, the cost value provided by TES are unclear. If reliable cost benefits were determined, stakeholders would have a clearer picture of the financial returns that can be gained from their investment in TES. The study in this report is conducted by ORNL with collaboration with Emerson the Helix Innovation Center. In the first part of this report, EnergyPlus was used to perform whole-building simulations for two residential buildings in Indianapolis and Atlanta. The HVAC system in both buildings were equipped with phase change material TES. The TES tank was charged in off-peak hours and discharged in peak hours to perform load shifting. First, the economic value implied by existing time-of-use (TOU) rates offered by utility companies was analyzed via whole-building simulation. Second, existing demand reduction (DR) incentives sourced from 3 different electrical grid administrators (i.e., California, Texas, and New England region) were surveyed to determine their implied value. The study suggests that the traditional value analysis that focuses on ROI for the building owner significantly undervalues TES technology making economic viability difficult. A more comprehensive value analysis that includes peak demand management and deferred capital for peaking power plants shows that TES should be economically viable but here the value is greater for the utility and requires large market penetration and aggregation to fully realize the benefits. Therefore, to facilitate commercialization, new business models are needed that include a broader range of stakeholders and distribute the value of TES proportionally. In the 2 nd part of this project, the benefits of a novel phase change material (PCM) integrated heat pump configuration were evaluated via detailed component based simulation. A one-dimensional PCM heat exchanger model which discretizes the PCM tank and refrigerant tubes into small control volumes is developed. Each control volume can have different PCM temperatures, PCM properties, and heat transfer coefficients. The PCM tank is charged by a wrapped tank condenser and discharged by an internal refrigerant coil. The PCM heat exchanger model is integrated into DOE/ORNL Heat Pump Design Model for heat pump system simulation. To demonstrate the performance of the PCM integrated heat pump, a case study in Chicago was performed. A Time-of-Use utility structure-based control strategy is implemented to schedule the PCM tank charging and discharging mode switching. Compared with a conventional electric heat pump, the PCM integrated heat pump shows superior performance on load shifting and utility cost reduction. As a result, the proposed system demonstrates 24.6% utility saving for cooling application and 25.8% utility saving for heating application.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Optimizing Alabama’s CO 2 Storage in Shelby County (Project OASIS) Milestone 6.0: Evaluation of Class VI Readiness

Introduction. Project OASIS is approximately 30 miles southeast of Birmingham, Alabama, and approximately 5 miles north-northwest of Alabama Power Company's Plant Gaston. Geologically, the Project area is in the Alabama fold and thrust belt province. This work builds on the initiatives of the Southeast Regional Carbon Utilization and Storage Acceleration Partnership (SECARB-USA, DE-FE0031830) that identified nearly 500 million metric tonnes of CO 2 emitted on an annual basis that is not collocated with prospective storage geology (the Coastal Plain of the Southeastern US in this context). This observation suggests costly investments in connective infrastructure (e.g., pipelines) or exploratory well drilling campaigns to identify CO 2 storage opportunities in under explored areas. While not traditionally thought of for saline storage, these studies suggest that storage prospects in the Valley and Ridge Province occur in relatively flat lying structural panels between thrust faults. For the Project OASIS region, available geologic studies related to hydrocarbon exploration suggest that Cambro-Ordovician carbonates and Cambrian clastic units offer multiple potential storage intervals, and that regional confining systems are present, such as the tectonically thickened Floyd-Parkwood Shale. The Project OASIS surface property is owned by a timber and land stewardship company, The Westervelt Company, Inc., who worked with the Project Team to select and prepare adequate sites for geologic assessment. The purpose of drilling the Westover Stratigraphic Test Well #2 was to collect geologic data to model the feasibility of commercial scale CO 2 injection and storage in an under explored region. This initiative benefits the regions emitters as the data generated from this study can inform their own internal decision making. The field program included geological and geophysical evaluations, reservoir engineering analyses, and risk assessments. This report evaluates existing data, as well as a variety of modeling scenarios to evaluate project readiness. Importantly, the impact of this study is not limited to Alabama as there are numerous large emitters throughout Appalachia, in similar geologic settings, contemplating their decarbonization options.

20 FOSSIL-FUELED POWER PLANTS↗

High Temperature Mechanical Behavior of Refractory Alloys with Digital Image Correlation

Gas turbine efficiency is typically limited by the maximum allowable temperature for components at the inlet side and in the hot gas flow. Refractory alloys and SiC/SiC ceramic-matrix composites (CMCs) are promising candidates for advancing operating temperatures beyond those of Ni-based alloys (>1200 °C). Refractory alloys are more suitable than SiC/SiC CMCs for dynamic components, due to the latter's low toughness and ductility. However, it is well known that refractory alloys suffer from poor oxidation behavior under service lifetimes and conditions, leading to embrittlement concerns. The ARPA-E ULTIMATE program has set out to combine new alloys with advanced coatings to mitigate oxidation/embrittlement effects, while increasing the mechanical performance benefits of refractory materials. Low oxygen (inert gas) or vacuum systems are needed to assess high temperature mechanical performance of developed alloys. To investigate the environmental sensitivity of candidate alloys and develop high temperature testing capabilities, four argon tensile frames were upgraded as well as a single vacuum system at Oak Ridge National Laboratory. Digital image correlation was incorporated into the vacuum frame allowing for surface strain determination and refined insight into thermomechanical response. Creep testing was performed at 1300 °C on two alloys, C-103 and MHC in vacuum and high purity argon environments. The Mo-based alloy showed less sensitivity to oxygen, indicating that testing in well-controlled argon environments may be suitable. The C-103 alloy demonstrated a stronger sensitivity to oxygen in the well-controlled argon environment, illustrating the need for the developed vacuum testing capabilities. “Small” 25 mm and “large” 76 mm MHC specimens showed comparable results in terms of strain rate during creep testing and ultimate tensile strength during tensile testing, suggesting the viability of smaller geometries that use less material of advanced developmental alloys.

Bell, Sam↗