Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “plasma processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The 2020 plasma catalysis roadmap

Abstract Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO 2 conversion into value-added chemicals and fuels, CH 4 activation into hydrogen, higher hydrocarbons or oxygenates, and NH 3 synthesis. Other applications are already more established, such as for air pollution control, e.g. volatile organic compound remediation, particulate matter and NO x removal. In addition, plasma is also very promising for catalyst synthesis and treatment. Plasma catalysis clearly has benefits over ‘conventional’ catalysis, as outlined in the Introduction. However, a better insight into the underlying physical and chemical processes is crucial. This can be obtained by experiments applying diagnostics, studying both the chemical processes at the catalyst surface and the physicochemical mechanisms of plasma-catalyst interactions, as well as by computer modeling. The key challenge is to design cost-effective, highly active and stable catalysts tailored to the plasma environment. Therefore, insight from thermal catalysis as well as electro- and photocatalysis is crucial. All these aspects are covered in this Roadmap paper, written by specialists in their field, presenting the state-of-the-art, the current and future challenges, as well as the advances in science and technology needed to meet these challenges.

Bogaerts, Annemie (ORCID:0000000198756460)↗
NASA NTRS1978

Effects of applied dc radial electric fields on particle transport in a bumpy torus plasma

The influence of applied dc radial electric fields on particle transport in a bumpy torus plasma is studied. The plasma, magnetic field, and ion heating mechanism are operated in steady state. Ion kinetic temperature is more than a factor of ten higher than electron temperature. The electric fields raise the ions to energies on the order of kilovolts and then point radially inward or outward. Plasma number density profiles are flat or triangular across the plasma diameter. It is suggested that the radial transport processes are nondiffusional and dominated by strong radial electric fields. These characteristics are caused by the absence of a second derivative in the density profile and the flat electron temperature profiles. If the electric field acting on the minor radius of the toroidal plasma points inward, plasma number density and confinement time are increased.

Roth, J. R.↗
NASA NTRS1979

Diffuse Jovian aurora influenced by plasma injection from Io

The paper demonstrates that the broad band of whistler-mode waves observed within the high density torus surrounding Io is consistent with electron cyclotron generation. Cyclotron resonant instability of Jovian energetic electrons is enhanced due to the lower resonant electron energy within the equatorial high density plasma torus surrounding the orbit of Io. The higher energy resonant electron scattering and the corresponding energetic electron lifetimes indicate that an efficient local acceleration process is required to replenish the precipitating relativistic electrons. Calculated energy deposition into the Jovian atmosphere should provide a dominant source of middle atmospheric ionization and excite a continuous band of diffuse auroral emission. It is suggested that the diffuse Jovian aurora should be influenced by the variable volcanic activity on Io which is thought to be an important source of plasma, since the cyclotron scattering process is strongly influenced by the ambient equatorial thermal plasma density.

Thorne, R. M.↗
NASA NTRS1981

Electromagnetic-wave excitation in a large laboratory beam-plasma system

The mechanism by which unstable electrostatic waves of a beam-plasma system are converted into observed electromagnetic waves is of current interest in space physics and in tokamak fusion research. The process involved in the conversion of electrostatic to electromagnetic waves at the critical layer is well understood. However, the radiation from uniform plasmas cannot be explained on the basis of this process. In connection with certain difficulties, it has not yet been possible to establish the involved emission processes by means of experimental observations. In the considered investigation these difficulties are overcome by employing a large laboratory plasma in a parameter range suitable for detailed diagnostics. A finite-diameter electron beam is injected into a uniform quiescent afterglow plasma of dimensions large compared with electromagnetic wavelengths. The considered generation mechanism concerning the electromagnetic waves is conclusively confirmed by observing the temporal evolution of an instability

Whelan, D. A.↗
DOE OSTI2025

Exploring scenarios for enhanced fuel compression and performance on the National Ignition Facility with machine-learning-aided design techniques

Recent fusion experiments on the National Ignition Facility (NIF) have achieved ignition, producing multi-MJ fusion yields for input laser energies of roughly 2 MJ [Abu-Shawareb et al., Phys. Rev. Lett. 132, 065102 (2024)]. Building on the success of the target designs that have achieved ignition, we explore new implosion scenarios predicted to generate significantly more compression of the dense DT ice layer and correspondingly higher yields while preserving many of the key physics characteristics of present-day ignition designs. Our main result is a novel 3-shock implosion scheme that effectively minimizes the shock-induced entropy in the dense, accelerating DT shell and maximizes the resulting fuel compression subject to a fixed leading shock strength consistent with present-day ignition experiments, which is necessary to melt the crystalline high-density carbon ablator. Compared to the first NIF experiment to fulfill Lawson's ignition criterion, shot N210808 [Abu-Shawareb et al., Phys. Rev. Lett. 129, 075001 (2022)], our design exhibits a 40% increase in simulated peak areal density (ρR) and a 5× increase in 1D fusion yield using a 4% lighter ablator and identical DT payloads. We also present a complete integrated 2D hohlraum design and laser pulse specifications capable of generating the desired 3-shock drive and maintaining control of the low-mode capsule implosion symmetry, where the increase in simulated 2D yield relative to N210808 is > 10×. This new implosion regime was discovered with help from a machine-learning-enabled capsule design optimization framework. We outline the workflow this automated tool uses to identify improved design candidates by running several rounds of capsule simulations, constructing a surrogate model mapping input variations to key physics output quantities, and querying the resulting statistical model to propose adjustments to the x-ray drive and capsule to reach a set of physics objectives prescribed by the designer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A Gaussian process guide for signal regression in magnetic fusion

Extracting reliable information from diagnostic data in tokamaks is critical for understanding, analyzing, and controlling the behavior of fusion plasmas and validating models describing that behavior. Recent interest within the fusion community has focused on the use of principled statistical methods, such as Gaussian process regression (GPR), to attempt to develop sharper, more reliable, and more rigorous tools for examining the complex observed behavior in these systems. While GPR is an enormously powerful tool, there is also the danger of drawing fragile, or inconsistent conclusions from naive GPR fits that are not driven by principled treatments. Here we review the fundamental concepts underlying GPR in a way that may be useful for broad-ranging applications in fusion science. We also revisit how GPR is developed for profile fitting in tokamaks. We examine various extensions and targeted modifications applicable to experimental observations in the edge of the DIII-D tokamak. Finally, we discuss best practices for applying GPR to fusion data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Time integrator agnostic charge conserving finite element PIC

Developing particle-in-cell (PIC) methods using finite element basis sets, and without auxiliary divergence cleaning methods, was a longstanding problem until recently. It was shown that if consistent spatial basis functions are used, one can indeed create a methodology that was charge conserving, albeit using a leapfrog time stepping method. While this is a significant advance, leapfrog schemes are only conditionally stable and time step sizes are closely tied to the underlying mesh. Ideally, to take full advantage of advances in finite element methods (FEMs), one needs a charge conserving PIC methodology that is agnostic to the time stepping method. This is the principal contribution of this paper. In what follows, we shall develop this methodology, prove that both charge and Gauss’ laws are discretely satisfied at every time step, provide the necessary details to implement this methodology for both the wave equation FEM and Maxwell solver FEM, and finally demonstrate its efficacy on a suite of test problems. The method will be demonstrated by single particle evolution, non-neutral beams with space-charge, and adiabatic expansion of a neutral plasma, where the Debye length has been resolved, and real mass ratios are used.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Kinetic mix at gas-shell interface in inverted corona fusion targets

Gas-filled, laser-driven “inverted corona” fusion targets have attracted interest as a low-convergence neutron source and platform for studying kinetic physics. At the fill pressures under investigation, ejected particles from the shell can penetrate deeply into the gas before colliding, leading to significant mixing across the gas–shell interface. Here, we use kinetic-ion, fluid-electron hybrid particle-in-cell simulations to explore the nature of that mix. Simulations of the system demonstrate characteristics of a weakly collisional electrostatic shock, whereby a strong electric field accelerates shell ions into the rarefied gas and reflects upstream gas ions. This interpenetration is mediated by collisional processes: At higher initial gas pressure, fewer shell particles pass into the mix region and reach the hotspot. This effect is detectable through neutron yield scaling vs gas pressure. Predictions of neutron yield scaling show excellent agreement with experimental data recorded at the OMEGA laser facility, suggesting that 1D kinetic mechanisms are sufficient to capture the mix process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Comparison of excitation temperature of a laser-produced plasma by combining emission and absorption spectroscopy

Measurement of the temporal evolution of laser-produced plasma temperature is very important for many of its applications, and several plasma diagnostic tools are routinely used by researchers. However, it is very challenging to measure the properties of the plasma at the early and late times of its evolution using a single diagnostic tool. In this study, we combined emission and laser absorption spectroscopy to compare the excitation temperatures of a laser-produced uranium plasma system. Several U I transitions in the near-infrared spectral range (775–800 nm) were considered, and the Boltzmann plot method was used to measure the excitation temperatures using both emission and absorption spectroscopy. Emission spectroscopy provided early-time temperature measurements of the plasma up to times 2–20 µs, while absorption spectroscopy provided temperature measurements at late times of plasma evolution (for times 5–80 µs). The emission and absorbance of U I transitions were found to follow the Boltzmann distribution, indicating the plasma is likely in the state of local thermodynamic equilibrium even at late times of its lifetime. The emission and absorption-based time-resolved excitation temperatures demonstrated good agreement at earlier times (≤15 µs) in the overlapped temporal region, while a deviation in the measured values was seen at times (≥15 µs), and potential reasons for such a disagreement are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1994

Comparison of the plasma tails of four comets: P/Halley, Okazaki-Levy-Rudenko, Austin, and Levy

Photographic and charge coupled device (CCD) plasma tail observations are compared for four comets: P/Halley (22 nights in 1985/1986), Okazaki-Levy-Rudenko 1989 XIX (1989 December 2), Austin 1990 V (nine nights in 1990), and Levy 1990 XX (two nights in 1991). We present a discussion of several image-processing techniques used to enhance the visibility of the plasma tail features in order to measure velocities, accelerations, and position angles. The data are used to assess the validity of various physical mechanisms proposed to explain plasma tail phenomena. Seven disconnection events were observed in the comet P/Halley data, two in the Austin data, and none for the other comets. Analysis of these data suggests that while the crossing of the solar neutral sheet (the sector boundary) is a prominent factor in the production of a disconnection event, it is likely that several mechanisms are at work. A sector boundary crossing has been ruled out as the cause of either the 1986 April 26 P/Halley disconnection or the 1990 May 5/6 Austin disconnection. The motions of the disconnection events, knots, and condensations in the tails were seen to increase from 30-60 km/s near the nucleus (within 10(exp 6) km) to 80-100 km/s at 10(exp 7) km, consistent with either bulk motion or Alfven waves. Distinguishing between the two cases is not possible with these data. It was found that although the tail ray rotation rate slows as the ray approaches the tail axis, it is not a good indicator of the solar wind speed. Historical plasma tail data are also used to look for clues as to why some comets form well-developed plasma tails and others do not.

Farnham, Tony L.↗
NASA NTRS2000

Laser Lightcraft Performance

The purpose of this study is to establish the technical ground for modeling the physics of laser powered pulse detonation phenomenon. The principle of the laser power propulsion is that when high-powered laser is focused at a small area near the surface of a thruster, the intense energy causes the electrical breakdown of the working fluid (e.g. air) and forming high speed plasma (known as the inverse Bremsstrahlung, IB, effect). The intense heat and high pressure created in the plasma consequently causes the surrounding to heat up and expand until the thrust producing shock waves are formed. This complex process of gas ionization, increase in radiation absorption and the forming of plasma and shock waves will be investigated in the development of the present numerical model. In the first phase of this study, laser light focusing, radiation absorption and shock wave propagation over the entire pulsed cycle are modeled. The model geometry and test conditions of known benchmark experiments such as those in Myrabo's experiment will be employed in the numerical model validation simulations. The calculated performance data will be compared to the test data.

Chen, Yen-Sen↗
DOE OSTI2020

Basic factors for acquiring, correcting, and interpreting probe current-voltage characteristic in moderate-collisional plasma for determining electron energy distribution

Methods for inferring the electron distribution function (EDF) from a probe current–voltage trace are reviewed for moderate-collisional plasma. The explicit accounting of particle collisions, modeling sheath depletion, and electron refilling processes are rarely performed when analyzing probe measurements, yet they are critical for regime validity, EDF-profile accuracy, and space potential quantification precision. Furthermore, the advantages, limitations, and utilization of large-area wall probes in moderate-collisional plasma, capable of highly resolved indications of energetic electrons in plasma, are outlined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

A Generalized Grain-Scale Model for the Non-Plasma and Plasma-Assisted Hydrogen Direct Reduction of Iron Ore

Direct Reduction of Iron ore using hydrogen (H-DRI) is a promising pathway towards efficient steelmaking and accurate predictive models are a necessity for scale-up and optimization of this technology. However, accurate models of this process remain limited because existing models oversimplify grain-scale phenomena, such as nonlinearity inside grain, self-sufficient porosity, surface reactions, and the role of plasma species. These phenomena are important for flash steelmaking and plasma-assisted H-DRI processes. To address this need, we present a phenomenological model for simulating H-DRI at the scale of a single micron-sized grain of the iron ore. We call this the Transient Reactive Grain Model (TRGM). TRGM incorporates key physical process: gas species transport, a chemical kinetics of material conversion, nanopore structural evolution and, adsorption-desorption surface kinetics at the reactive nanopore surface. The important contribution of this work is that the model provides a dependence on different reductant species, specifically hydrogen atoms versus molecules, so that role of hydrogen plasma reduction can be clarified compared to the use of pure hydrogen gas reduction. TRGM predictions agree well with experimental data for both molecular H2 reduction of Fe2O3 and plasma hydrogen reduction of Fe3O4. Results reveal species concentration gradients with a diffuse reaction zone, and enhanced hydrogen diffusion at the grain outer surface due to evolving porosity. These findings challenge common assumptions in existing models, including sharp reaction fronts, quasi-steady diffusion and kinetics, and the neglect of surface chemistry. As a generalized grain-scale model for H-DRI processes, TRGM has practical applications in flash steelmaking and in-flight reduction using both molecular and plasma hydrogen.

08 HYDROGEN↗
NASA NTRS1976

Depletion of solar wind plasma near a planetary boundary

A mathematical model is presented that describes the squeezing of solar wind plasma out along interplanetary magnetic field lines in the region between the bow shock and the effective planetary boundary (in the case of the earth, the magnetopause). In the absence of local magnetic merging the squeezing process should create a 'depletion layer', a region of very low plasma density just outside the magnetopause. Numerical solutions are obtained for the dimensionless magnetohydrodynamic equations describing this depletion process for the case where the solar wind magnetic field is perpendicular to the solar wind flow direction. For the case of the earth, the theory predicts that the density should be reduced by a factor exceeding 2 in a layer about 700-1300 km thick if the Alfven Mach number in the solar wind, is equal to 8. Scaling of the model calculations to Venus and Mars suggests layer thicknesses about 1/10 and 1/15 those of the earth, respectively, neglecting diffusion and ionospheric effects.

Zwan, B. J.↗
NASA NTRS2019

Revealing the Multiscale Nature of Turbulence in Space Plasmas with an Innovative Swarm of Spacecraft

Abstract: Turbulence is fundamentally a multiscale phenomena, with energy, mass, and momentum being transported across both spatial and temporal scales. In a magnetized collisionless plasma, there are unresolved questions about the structure of the turbulent transfer of energy, as well as how the energy is extracted from the cascade and dissipated as heat in the constituent charged particles. The plasma in the solar wind acts as an accessible natural laboratory to study these processes, and much progress has indeed been made since the dawn of the space age in understanding turbulence via in situ observations of turbulent plasmas near Earth. However, to date, these observations have been limited to a single, or at best, a tight cluster of points, leading to ambiguities in at what scales energy is contained, how it is transported, and by what mechanism it is dissipated. In this presentation, we describe a heliophysics mission concept aimed at understanding turbulence that is enabled by a swarm of small satellites. The proposed "HelioSwarm" mission will measure turbulent fields and flows and charged particles simultaneously at many points spanning size and time scales from the fluid to sub-ion regime. In doing so, we will be able to disentangle how the turbulence depends on time and space, directly observe the change in internal energy in the plasma, and definitively capture the dynamic relation between turbulence and structures. While the processes under examination are universal, arising throughout our solar system and universe, they are difficult to reproduce in either terrestrial laboratories or numerical simulations, meaning that the only a multipoint observatory in the near-Earth heliosphere will be able to study them in sufficient detail to discern the underlying physics. In this talk, we highlight the enabling role that small satellites play in providing closure on these long-standing but critically important science questions.

Spence, H. E.↗
NASA NTRS1984

The physical mechanisms of subcritical collisionless shock-wave formation

The key process in shock wave formation is related to energy dissipation, and the nature of the operative dissipation mechanism determines the basic character of the resulting shock. In the case of collisionless plasmas, the primary problem consists in the identification of the processes which can provide the necessary dissipation in relatively short spatial scale lengths. The present investigation is concerned with the various collisionless dissipation mechanisms which can operate in weak shocks, taking into account the effects of different mechanisms on shock structure. Particular attention is given to a restricted class of quasi-perpendicular low beta low Mach number shocks. Such shocks are traditionally called 'laminar shocks'. Resistive shocks are considered along with subcritical shocks observed with the aid of the ISEE spacecraft.

Mellott, M. M.↗
DOE OSTI2022

Growth chemistry of cobalt nitride by plasma enhanced atomic layer deposition

State-of-the-art atomic layer deposition (ALD) and photoemission characterisation are applied to grow and characterise cobalt nitride, a material that has applications in renewable energy and semiconductor technologies. The growth process is characterised using an in situ cycle-by-cycle methodology to identify the main factors which underpin optimal material growth. The role of co-reactant dosing and substrate temperature is analysed in detail to demonstrate the impact these parameters have on the overall composition of the film. The in situ approach, combined with high-energy synchrotron-based photoemission studies of the resulting films, enables understanding of the bulk chemical properties without need for physical removal of material by sputtering. The results provide an insight into optimising plasma assisted ALD processes for deposition of cobalt nitride, and strategies for minimizing carbon incorporation into the film from the precursor ligands.

36 MATERIALS SCIENCE↗