Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Study of an Automatic System for Control of the Terminal Phase of Satellite Rendezvous

An analytical and simulation study has been conducted of an automatic system for control of the terminal phase of rendezvous between two space vehicles. The basic system employs switching and thrust orientation criteria based upon relative-motion parameters first to establish a collision course and then to reduce the range and range rate to zero, simultaneously. In addition, a technique has been devised by which the system effects control based upon the total amount of fuel available for this phase of the space mission. The onboard equipment assumed for the intercepting vehicle includes a special-purpose computer, an attitude-control system, a single main rocket engine with, multi-start capabilities, and sensors capable of measuring range, line-of sight angles, and the time derivatives of these quantities. Techniques are developed. for employing control with either modulated thrust or on-off thrust at a constant level. The results of an analog simulation study of the automatic control system in which a six-degree-of freedom vehicle is assumed are presented for various initial conditions at the beginning of the terminal phase. The results of the study indicate that the automatic system can effectively control the terminal phase of rendezvous over a wide range of initial conditions and control-system requirements and, in addition, can utilize the available fuel in a very efficient manner.

RENDEZVOUS↗

The Use of Subcarriers in Future DSN Missions

The performance of deep space telemetry signals that employ a residual carrier modulation technique is compared in the presence and absence of a subcarrier. When the subcarrier is present, the performance for the resulting pulse-coded modulation/phase-shift keyed/phase-modulated (PCM/PSK/PM) scheme is evaluated for both sine wave and square wave subcarriers and non-return-to zero (NRZ) data. When the subcarrier is absent, the performance for the resulting PCM/PM technique is evaluated for both the NRZ and the bi-phase data format. The comparison is based on telemetry performance as well as bandwidth efficiency. The first criterion is characterized in terms of the symbol error rate (SER) as a function of symbol SNR, loop bandwidth-to-data rate ratio, and modulation index. The bandwidth efficiency is characterized by the occupancy factor. The results of both the analysis and measurements show that when the interference-to-carrier ratio (ICR) is less than -15 dB, the performance degradation in the absence of a subcarrier is negligible. Various combinations of loop bandwidth-to-data rate ratios and modulation indices that achieve this performance are derived and listed. Bandwidth occupancy comparison indicates that PCM/PM/NRZ is the most efficient in this regard. Therefore, by eliminating the subcarrier and using the PCM/PM/NRZ scheme, many advantages can be realized without any sacrifice in performance.

Shihabi, M. M.↗

X-ray observations of EX Hydrae with the Einstein Solid State Spectrometer

Einstein SSS X-ray observations of the eclipsing intermediate polar EX Hya are presented. The SSS data have a better resolution at energies extending below 2 keV than do the EXOSAT data. These data reveal the presence of a soft component with a temperature of about 0.74 keV. The phase-resolved data can be fitted to a model of two-temperature thermal plasma with a single absorber, with the result that only the normalization varies with phase. This suggests that part of the soft component might become occulted at minimum. If we assume that the reduction in the flux occurs due to the photoelectric absorption, we find that a high-density material covering only about 40 percent of the emission can fit the data equally well. The EXOSAT and Ginga data of this source favor the accretion curtain model rather than the occultation model. We modify the accretion curtain model by assuming that the modulation is caused by an absorber which partially covers the accreting column at the minimum of the 67-min pulse. An emission line at 1.72 keV is present in the data. The equivalent width of this line varies in phase with the continuum. We associate this line with Si fluorescence.

Singh, Jyoti↗

Phase-Retrieval Uncertainty Estimation and Algorithm Comparison for the JWST-ISIM Test Campaign

Phase retrieval, the process of determining the exitpupil wavefront of an optical instrument from image-plane intensity measurements, is the baseline methodology for characterizing the wavefront for the suite of science instruments (SIs) in the Integrated Science Instrument Module (ISIM) for the James Webb Space Telescope (JWST). JWST is a large, infrared space telescope with a 6.5-meter diameter primary mirror. JWST is currently NASA's flagship mission and will be the premier space observatory of the next decade. ISIM contains four optical benches with nine unique instruments, including redundancies. ISIM was characterized at the Goddard Space Flight Center (GSFC) in Greenbelt, MD in a series of cryogenic vacuum tests using a telescope simulator. During these tests, phase-retrieval algorithms were used to characterize the instruments. The objective of this paper is to describe the Monte-Carlo simulations that were used to establish uncertainties (i.e., error bars) for the wavefronts of the various instruments in ISIM. Multiple retrieval algorithms were used in the analysis of ISIM phase-retrieval focus-sweep data, including an iterativetransform algorithm and a nonlinear optimization algorithm. These algorithms emphasize the recovery of numerous optical parameters, including low-order wavefront composition described by Zernike polynomial terms and high-order wavefront described by a point-by-point map, location of instrument best focus, focal ratio, exit-pupil amplitude, the morphology of any extended object, and optical jitter. The secondary objective of this paper is to report on the relative accuracies of these algorithms for the ISIM instrument tests, and a comparison of their computational complexity and their performance on central and graphical processing unit clusters. From a phase-retrieval perspective, the ISIM test campaign includes a variety of source illumination bandwidths, various image-plane sampling criteria above and below the Nyquist- Shannon critical sampling value, various extended object sizes, and several other impactful effects.

Design Analysis↗

Satellite power system (SPS) magnetron tube assessment study

Taks performed to extend the data base and to define a technology development program for the magnetron directional amplifier for the SPS are reviewed. These include: (1) demonstrating the tracking of phase and amplitude of the microwave output to phase and amplitude references; (2) expanding the range of power over which the directional amplifier will operate; (3)recognizing the importance of amplitude control in overall system design and in simplifying power conditioning; (4) developing a preliminary design for the overall architecture of the power module; (5) demonstrating magnetron starting using the amplitude control system; (6) mathematically modelling and performing a computerized study of the pyrolytic graphite radiating fin; (7) defining the mass of the magnetic circuit for the SPS tube; (8) noise measurement; (9) achieving harmonic suppression by notch reflection filters; (10) estimating the mass of the transmitting antenna; (11) developing a magnetron package with power generation, phase control, and power condition functions; and (12) projecting magnetron package characteristics.

Source record↗

A Comparison of Telemetry Signals in the Presence and Absence of a Subcarrier

The performance of deep-space telemetry signals that employ a residual carrier modulation technique is compared in the presence and absence of a subcarrier. When the subcarrier is present, the performance for the resulting pulse-coded modulation/phase-shift keyed/phase-modulated (PCM/PSK/PM) scheme is evaluated for both sine-wave and square-wave subcarriers and Non-Return-to Zero (NRZ) data. When the subcarrier is absent, the performance for the resulting PCM/PM technique is evaluated for both the NRZ and the bi-phase data format. The comparison is based on telemetry performance as well as bandwidth efficiency. The first criterion is characterized in terms of the Symbol Error Rate (SER) as a function of symbol SNR, loop bandwidth-to-data rate ratio, and modulation index. The bandwidth efficiency is characterized by the occupancy factor. The results of both the analysis and measurements show that when the Interference-to-Carrier Ratio (ICR) is less than -20 dB, the performance degradation in the absence of a subcarrier is negligible. Various combinations of loop bandwidth-to-data rate ratios and modulation indices that achieve this performance are derived and listed. Bandwidth occupancy comparison indicates that PCM/PM/NRZ is the most efficient in this regard. Therefore, by eliminating the subcarrier and using the PCM/PM/NRZ scheme, many advantages can be realized without any sacrifice in performance.

Shihabi, Mazen M.↗

A programmable power processor for a 25 kW power module

The paper presents the concept and major design problems of a programmable power processor for the 25 kW electrical power system for the Shuttle Orbiter. The load will be handled by three parallel power stages operated in phase sequence with each power transistor having its own commutating diode and filter inductor. The power stages will be run at a fixed frequency of 10 kHz with the 'on'-time variable up to 100%. The input filter bank in the breadboard programmable power processor is planned to be a series-parallel combination of tantalum cased tantalum wet-slug capacitors.

Kapustka, R. E.↗

Radio-Frequency and Wideband Modulation Arraying

Summing network receives coherent signals from all receivers in array. Method sums narrow-band radio-frequency (RF) carrier powers and wide-band spectrum powers of array of separate antenna/receiver systems designed for phase-locked-loop or suppressed-carrier operation.

Brockman, M. H.↗

Solid state phase detector replaces bulky transformer circuit

Miniature solid state phase detector using MOSFETs is used in a phase lock loop with a sun-bit detector in an integrated data-link circuit. This replaces bulky transformer circuits. It uses an inverter amplifier, a modulator switch, and a buffer amplifier.

Moberly, C. L.↗

System definition of SEASAT-A, an ocean observation satellite

SEASAT will be an earth-satellite system designed to monitor and observe ocean dynamics in order to provide data for real-time use and predictive purposes. SEASAT-A will be a prototype satellite which will provide experience for system development and some operational demonstration capability. The SEASAT-A will use passive and active visible, infrared, and microwave sensing techniques. The payload will include a scanning radiometer (SR) and a scanning multichannel microwave radiometer (SMMR), which are passive sensors, a short-pulse altimeter, a scatterometer, and a synthetic aperture radar, which are active. The major functional elements considered in the definition-phase studies are the sensors, data handling, communications, attitude control, power, orbit adjust, thermal control, structures, and mechanical design. An existing satellite bus, with sensors and sensor modules to be developed, is to be used on SEASAT-A.

Rose, J. R.↗

Wave propagation in intense flux tubes

The nature of nonadiabatic wave propagation in a slender magnetic flux tube is explored. The results of the theory are compared with the observations of Giovanelli et al. (1978), and found to be in general agreement. Those observations, of tubes in the photosphere-chromosphere, show outwardly propagating waves, with periods of 300 s, which take some 19 s to propagate from one level of line formation to another level higher in the atmosphere. In sharp contrast to this, is the time of 7 s for a similar disturbance outside the tube to propagate between the same two levels of line formation, estimated to be some 600 km apart in the field-free atmosphere. It is argued that the sharply contrasting propagation times for the tube and its environment is principally due to the elasticity of the tube and its subsequent propensity for propagation. A nonadiabatic disturbance may be essentially propagating within the tube but essentially nonpropagating outside, with considerably slower phase speeds thus arising inside the tube. The theory suggests that the observed disturbances are nonadiabatic, acoustic-gravity waves channelled along a magnetic flux tube and modulated by external pressure variations.

Roberts, B.↗

Assembling the basic structure

Specific tasks to be undertaken by the NASA-Johnson, Phase B management of the manned Space Station are described. These tasks include the analysis, definition, and design of the following systems: assembly trusses and structures; interconnection modules; airlock system; heat rejection and transport; guidance, navigation and control systems; mechanical systems; resource integration; data management; communication and tracking; habitat for the crew; hardware need for cost-effective EVA; interface and berthing for compatible space-transportation system; and software development environment. The components, functions, and the key design goals of each of these systems are discussed.

Covington, C.↗

Phase-Measuring System

System developed and used at Langley Research Center measures phase between two signals of same frequency or between two signals, one of which is harmonic multiple of other. Simple and inexpensive device combines digital and analog components to give accurate phase measurements. One signal at frequency f fed to pulse shaper, produces negative pulse at time t4. Pulse applied to control input of sample-and-hold module 1. Second signal, at frequency nf, fed to zero-crossover amplifier, producing square wave at time t. Signal drives first one-shot producing narrow negative pulse at t1. Signal then drives second one-shot producing narrow positive pulse at time t2. This pulse used to turn on solid-state switch and reset integrator circuit to zero.

Davis, W. T.↗

Integrated restructurable flight control system demonstration results

The purpose of this study was to examine the complementary capabilities of several restructurable flight control system (RFCS) concepts through the integration of these technologies into a complete system. Performance issues were addressed through a re-examination of RFCS functional requirements, and through a qualitative analysis of the design issues that, if properly addressed during integration, will lead to the highest possible degree of fault-tolerant performance. Software developed under previous phases of this contract and under NAS1-18004 was modified and integrated into a complete RFCS subroutine for NASA's B-737 simulation. The integration of these modules involved the development of methods for dealing with the mismatch between the outputs of the failure detection module and the input requirements of the automatic control system redesign module. The performance of this demonstration system was examined through extensive simulation trials.

Weiss, Jerold L.↗

Pumped two-phase heat transfer loop

A pumped loop two-phase heat transfer system, operating at a nearly constant temperature throughout, includes several independently operating grooved capillary heat exchanger plates supplied with working fluid through independent flow modulation valves connected to a liquid supply line, a vapor line for collecting vapor from the heat exchangers, a condenser between the vapor and the liquid lines, and a fluid circulating pump between the condenser and the heat exchangers.

Edelstein, Fred↗

Transmitting Reference Radio Signals On Two Optical Carriers

Radio-frequency reference signal used to modulate two optical carriers at transmitter. Dispersion in optical-fiber or free-space transmission medium, used to advantage in receiver to measure and compensate for phase and frequency fluctuations induced by fluctuations in propagation conditions. Corrections for delay and for changes in delay made at receiver. Requires only one-way transmission, simpler in principle, more energy- and cost-efficient, and enables use of longer transmission paths.

Maleki, Lutfollah↗

The unusual X-ray pulse timing of AE Aquarii

X-ray data for AE Aqr are reanalyzed by using a refined analysis technique and different approaches. The results obtained indicate that X-rays are produced at the same site as the optical, and there is no evidence for the direct X-ray beam from the white dwarf. The optical period was found to be the most significant X-ray period. The direct X-ray beam from the white dwarf is at least four times weaker than the pulsed X-ray signal at the optical period. Given the above-mentioned correlations with the optical, it is inferred that the X-ray pulsations must originate at the same target in the orbit responsible for the optical pulsations. There is a possible orbital modulation of the optical pulse-timing and emission-line orbits. It is shown that the X-ray pulse has slipped at least twice in phase by more than 30 percent in two years' time.

De Jager, O. C.↗

Soft x ray properties of the Geminga pulsar

The ROSAT soft x ray spectrum and pulse profile of the Geminga pulsar are analyzed and interpreted in terms of thermal emission from the surface of the neutron star. The x ray spectrum appears to consist of two blackbody components with T(sub 1) = (5.2 +/- 1.0) x 10 (exp 5) K and T(sub 2) approximately 3 x 10(exp 6) K, respectively. The inferred ratio of surface areas, A(sub 2)/A(sub 1), is approximately 3 x 10(exp -5). Both components are highly modulated at the pulsar rotation period, but the harder x ray pulse is narrower, and leads the main (soft) x ray pulse by about 105 deg of phase. The soft x ray component is interpreted as photospheric cooling of much of the neutron star's surface area, while the small, hot region could be part of the much smaller polar cap heated by energetic particles flowing inward from the magnetospheric accelerator which is responsible for the production of Geminga's gamma rays. Geminga's gamma ray emission is consistent with outer-magnetosphere accelerator models for highly inclined dipoles. These predict the beaming of energetic gamma rays close enough to the star to give copious e(+/-) production in the stellar magnetic field and a large circumstellar pair density from pair inflow toward the surface. These pairs may quench radio emission, and also reflect most of the hard polar cap x rays back to the stellar surface by cyclotron resonance scattering. They are then reemitted from that much larger area at the lower temperature T(sub 1). The single-peaked nature of the x ray pulse and its energy-dependent phase suggest an off-center dipole geometry for the surface magnetic field. Under the assumption that the soft x ray emission comes from the full surface of a neutron star of radius R = 10 km, a distance estimate of (150-400) pc is derived. This range is consistent with the fit interstellar column density of (1.5 +/- 0.5) x 10(exp 20) cm(exp -2). Distances less than 150 pc are probably ruled out both by the lower limit on the column density, and also by the requirement that the Rayleigh-Jeans extrapolation of the soft x ray spectrum not exceed the observed blue flux of the faint optical counterpart. This distance estimate implies that Geminga's efficiency for converting spindown power into gamma-rays is near unity, and that there may be significant beaming of the gamma rays as well. These results tend to bolster the prospect that most of the unidentified high-energy gamma ray sources in the Galactic plane are pulsars, some of which may be radio quiet.

Halpern, J. P.↗