Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flight computer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Adding computationally efficient realism to Monte Carlo turbulence simulation

Frequently in aerospace vehicle flight simulation, random turbulence is generated using the assumption that the craft is small compared to the length scales of turbulence. The turbulence is presumed to vary only along the flight path of the vehicle but not across the vehicle span. The addition of the realism of three-dimensionality is a worthy goal, but any such attempt will not gain acceptance in the simulator community unless it is computationally efficient. A concept for adding three-dimensional realism with a minimum of computational complexity is presented. The concept involves the use of close rational approximations to irrational spectra and cross-spectra so that systems of stable, explicit difference equations can be used to generate the turbulence.

Campbell, C. W.↗
NASA NTRS1973

Statistical Trajectory Estimation Program (STEP) implementation for BLDT post flight trajectory simulation

Tests were conducted to provide flight conditions for qualifying the Viking Decelerator System in a simulated Mars environment. A balloon launched decelerator test (BLDT) vehicle which has an external shape similar to the actual Mars Viking Lander Capsule was used so that the decelerator would be deployed in the wake of a blunt body. An effort was made to simulate the BLDT vehicle flights from the time they were dropped from the balloon, through decelerator deployment, until stable decelerator conditions were reached. The procedure used to simulate these flights using the Statistical Trajectory Estimation Program (STEP) is discussed. Using primarily ground-based position radar and vehicle onboard rate gyro and accelerometer data, the STEP produces a minimum variance solution of the vehicle trajectory and calculates vehicle attitude histories. Using film from cameras in the vehicle along with a computer program, attitude histories for portions of the flight before and after decelerator deployment were calculated independent of the STEP simulation. With the assumption that the vehicle motions derived from camera data are accurate, a comparison reveals that STEP was able to simulate vehicle motions for all flights both before and after decelerator deployment.

Shields, W. E.↗
NASA NTRS1978

Critical issues in viscous flow computations

In developing computer programs to numerically solve the Navier-Stokes equations, the purpose of the computation must be clearly kept in mind. In the Air Force, the purpose is to provide design information on non-linear aerodynamic phenomenon for aircraft that perform throughout the flight corridor. This translates into the requirement for a computer program which can solve the time averaged compressible Navier-Stokes equations (with a turbulence model) in three dimensions for generalized geometries. The intended application of the results then controls the priorities in addressing critical issues. Recurrent problem areas encountered in the study of viscous flow include: (1) grid generation for arbitrary geometry; (2) numerical difficulties; (3) turbulence models; (4) accuracy and efficiency; and (5) smearing of discontinuities.

Hankey, W. L., Jr.↗
NASA NTRS1989

JPL control/structure interaction test bed real-time control computer architecture

The Control/Structure Interaction Program is a technology development program for spacecraft that exhibit interactions between the control system and structural dynamics. The program objectives include development and verification of new design concepts - such as active structure - and new tools - such as combined structure and control optimization algorithm - and their verification in ground and possibly flight test. A focus mission spacecraft was designed based upon a space interferometer and is the basis for design of the ground test article. The ground test bed objectives include verification of the spacecraft design concepts, the active structure elements and certain design tools such as the new combined structures and controls optimization tool. In anticipation of CSI technology flight experiments, the test bed control electronics must emulate the computation capacity and control architectures of space qualifiable systems as well as the command and control networks that will be used to connect investigators with the flight experiment hardware. The Test Bed facility electronics were functionally partitioned into three units: a laboratory data acquisition system for structural parameter identification and performance verification; an experiment supervisory computer to oversee the experiment, monitor the environmental parameters and perform data logging; and a multilevel real-time control computing system. The design of the Test Bed electronics is presented along with hardware and software component descriptions. The system should break new ground in experimental control electronics and is of interest to anyone working in the verification of control concepts for large structures.

Briggs, Hugh C.↗
NASA NTRS1972

SCIP2 flight instrumentation specification for parameter identification: User's guide

SCIP2 which is a digital computer program that can be used to investigate the effects of instrumentation errors on the accuracy of aircraft stability and control derivatives identified from flight test data is presented. The program is based on the assumptions that the aircraft differential equations of motion are linear and consist of small perturbations about a quasisteady flight condition. It is also assumed that a Newton-Raphson optimization technique is used for identifying the estimates of the parameters. A summary of the equations which are coded in the program are included.

Taniguchi, N.↗
NASA NTRS1991

Computational Fluid Dynamics In Aerospace

Report reviews recent progress in computational fluid dynamics (CFD). Addresses state of art in terms of methods, examples of solutions, and computer technology. Provides examples of CFD solutions of aerospace and fluid-physics problems to illustrate recent progress. Aerospace solutions include rotor/stator velocity vectors from three-dimensional Navier-Stokes code for turbomachinery, pressure distributions from simulation of aeroelasticity of wing surface-pressure contours on four-bladed helicopter rotor in forward flight, and particle traces about several aerospace vehicles. Computer technology covers supercomputers, scientific work stations, local supercomputing networks, and remote access to supercomputers.

Kutler, Paul↗
NASA NTRS1986

Transonic aeroelastic analysis of the B-1 wing

The flow over the B-1 wing is studied computationally, including the aeroelastic response of the wing. Computed results are compared with results from wind tunnel and flight tests for both low- and high-sweep cases, at 25.0 and 67.5 deg, respectively, for selected transonic Mach numbers. The aerodynamic and aeroelastic computations are made by using the transonic unsteady code ATRAN3S. Steady aerodynamic computations compare well with wind tunnel results for the 25.0 deg sweep case and also for small angles of attack at 67.5 deg sweep case. The aeroelastic response results show that the wing is stable at the low-sweep angle for the calculation at the Mach number at which there is a shock wave. In the higher-sweep case, for the higher angle of attack at which oscillations were observed in the flight and wind tunnel tests, the calculations do not show any shock waves. Their absence lends support to the hypothesis that the observed oscillations are due to the presence of leading-edge separation vortices and not to shock wave motion, as was previously proposed.

Guruswamy, G. P.↗
NASA NTRS1980

The massively parallel processor

Future sensor systems will utilize massively parallel computing systems for rapid analysis of two-dimensional data. The Goddard Space Flight Center has an ongoing program to develop these systems. A single-instruction multiple data computer known as the Massively Parallel Processor (MPP) is being fabricated for NASA by the Goodyear Aerospace Corporation. This processor contains 16,384 processing elements arranged in a 128 x 128 array. The MPP will be capable of adding more than 6 billion 8-bit numbers per second. Multiplication of eight-bit numbers can occur at a rate of 2 billion per second. Delivery of the MPP to Goddard Space Flight Center is scheduled for 1983.

Schaefer, D. H.↗
NASA NTRS1971

A study of the flexible body dynamics of the RAE-A satellite

Spacecraft flight data was compared with simulated data computed by the RAE and IMP dynamics simulator computer programs. There was not sufficient data available to provide definitive data on antenna boom position to the Radio Astronomy experimenter. There was, however, enough data to indicate the trend of antenna boom stiffness and temperature gradient. It was possible to obtain a good fit of simulated data to measured spacecraft attitude data when the antenna booms were extended to 450 feet. The value of the RAE-A antenna boom stiffness appears to be significantly less than the preflight ground measured value. It was confirmed that an improved simulation can be obtained by using values of the root angles of the antenna booms and by using an angle of the damper plane of motion, relative to the plane of the antennas, which differed from preflight ground measurements.

Source record↗
NASA NTRS1972

A survey of NASA Langley studies on high-speed transition and the quiet tunnel

A quantitative experimental and theoretical assessment of the role of wind-tunnel disturbances in the boundary-layer transition process at hypersonic speeds is presented. The various approaches and recent results for the development of a low-noise-level tunnel are presented. A statistical parametric study of transition data with a large computer is shown for cones in free flight, ballistic ranges, and wind tunnels at essentially zero angle of attack. New transition results for slender cones at small angle of attack are also given, as are studies of transition at high angle of attack, which are compared with various correlation attempts. Included are results which indicate that hypersonic transition in the outer part of the boundary layer precedes the manifestation of transition at the wall.

Beckwith, I. E.↗
NASA NTRS1971

Table look-up approach to pattern recognition.

The table look-up approach is based on prestoring in fast, random-access, core memory the desired answer (e.g., crop-type) for all combinations of multispectral scanner outputs from selected channels. Specifically, each set of measurements from a given point on the ground is interpreted as that address in core memory where the answer can be retrieved. Substituting the simple retrieval operation for the length y computations required by the conventional approach offers two advantages: (1) the processing time is reduced by more than an order of magnitude; (2) the multispectral scanner data can be processed by computers having minimal sophistication, complexity, and cost. These two advantages may make it possible to use an onboard computer to perform the classification function in flight.

Eppler, W. G.↗
NASA NTRS1970

The Simulation of a Jumbo Jet Transport Aircraft. Volume 2: Modeling Data

The manned simulation of a large transport aircraft is described. Aircraft and systems data necessary to implement the mathematical model described in Volume I and a discussion of how these data are used in model are presented. The results of the real-time computations in the NASA Ames Research Center Flight Simulator for Advanced Aircraft are shown and compared to flight test data and to the results obtained in a training simulator known to be satisfactory.

Hanke, C. R.↗
NASA NTRS1973

Shuttle mission simulator software conceptual design

Software conceptual designs (SCD) are presented for meeting the simulator requirements for the shuttle missions. The major areas of the SCD discussed include: malfunction insertion, flight software, applications software, systems software, and computer complex.

Burke, J. F.↗
NASA NTRS1973

The design or operation of aircraft to minimize their sonic boom.

Means of reducing or eliminating the sonic boom through aerodynamic design or aircraft operation are discussed. These include designing aircraft to minimize or eliminate certain features of the overpressure signature, operating aircraft at slightly supersonic speeds so that the sonic boom does not reach the ground, and seeking reductions through the high altitude-high speed flight conditions of hypersonic transports. A simple computer program has been developed that determines the area development of the equivalent body of revolution required to minimize various sonic boom signature parameters.

Seebass, A. R.↗
NASA NTRS1972

Thermal characterization of reusable external insulation for the space shuttle.

Thermal protection systems utilizing reusable ceramic external insulations are under study for application to the orbiter vehicle of NASA's space shuttle system which is to be launched by an expendable booster, remain in orbit for a week or two, reenter the earth's atmosphere, and land like a conventional aircraft. The required reuse capability is for 100 missions. The thermal characterization of the reusable external insulation (REI) is described. Thermal conductivity measurements are described for a series of mullite-based REIs with densities ranging from 100 to 300 kg/cu m, including opacified variations of the mullite material designed for reduction of the radiant component of heat transport. The results of thermal conductivity measurements performed on guarded-hot-plate equipment from 150 to above 1200 K in different vacuum and gaseous environments are described. Measurements were also made with exceptionally large temperature differences to detect transparency effects in the unopacified REIs. These measurements were made to provide design data for the flight conditions, and to aid in theoretical computations aimed at separating and optimizing the heat transport components.

Brazel, J. P.↗