Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “environmental changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Metabolic capabilities mute positive response to direct and indirect impacts of warming throughout the soil profile

Increasing global temperatures are predicted to stimulate soil microbial respiration. The direct and indirect impacts of warming on soil microbes, nevertheless, remain unclear. This is particularly true for understudied subsoil microbes. Here, we show that 4.5 years of whole-profile soil warming in a temperate mixed forest results in altered microbial community composition and metabolism in surface soils, partly due to carbon limitation. However, microbial communities in the subsoil responded differently to warming than in the surface. Throughout the soil profile—but to a greater extent in the subsoil—physiologic and genomic measurements show that phylogenetically different microbes could utilize complex organic compounds, dampening the effect of altered resource availability induced by warming. We find subsoil microbes had 20% lower carbon use efficiencies and 47% lower growth rates compared to surface soils, which constrain microbial communities. Collectively, our results show that unlike in surface soils, elevated microbial respiration in subsoils may continue without microbial community change in the near-term.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1995

Major weapon system environmental life-cycle cost estimating for Conservation, Cleanup, Compliance and Pollution Prevention (C3P2)

The Titan 4 Space Launch Vehicle Program is one of many major weapon system programs that have modified acquisition plans and operational procedures to meet new, stringent environmental rules and regulations. The Environmental Protection Agency (EPA) and the Department of Defense (DOD) mandate to reduce the use of ozone depleting chemicals (ODC's) is just one of the regulatory changes that has affected the program. In the last few years, public environmental awareness, coupled with stricter environmental regulations, has created the need for DOD to produce environmental life-cycle cost estimates (ELCCE) for every major weapon system acquisition program. The environmental impact of the weapon system must be assessed and budgeted, considering all costs, from cradle to grave. The Office of the Secretary of Defense (OSD) has proposed that organizations consider Conservation, Cleanup, Compliance and Pollution Prevention (C(sup 3)P(sup 2)) issues associated with each acquisition program to assess life-cycle impacts and costs. The Air Force selected the Titan 4 system as the pilot program for estimating life-cycle environmental costs. The estimating task required participants to develop an ELCCE methodology, collect data to test the methodology and produce a credible cost estimate within the DOD C(sup 3)P(sup 2) definition. The estimating methodology included using the Program Office weapon system description and work breakdown structure together with operational site and manufacturing plant visits to identify environmental cost drivers. The results of the Titan IV ELCCE process are discussed and expanded to demonstrate how they can be applied to satisfy any life-cycle environmental cost estimating requirement.

Hammond, Wesley↗
NASA NTRS2019

Growth Response of Water Hyacinth to Environmental Ranges in the California Sacramento-San Joaquin River Delta

Management of aquatic weeds in complex watersheds and river systems present many challenges to assessment, planning, and implementation of management for aquatic invasive plants. The Delta Region Areawide Aquatic Weed Project (DRAAWP), a USDA sponsored area-wide project including NASA Ames Research Center and State of California Department of Boating and Waterways, is working to enhance decision-making and operational efficiency of invasive plant management in the California Sacramento-San Joaquin Delta. Expansion of invasive aquatic plants has been detrimental to water management and the ecosystem complex in the San Francisco Bay/California Delta. The portion of DRAAWP reported here focuses on parametrizing the environmental response inputs for the Delta models for prominent invasive aquatic plants. Changing climate, long-term drought, shifts in land use, and variation in water flow and quality from input watersheds lead to wide and unique variation in environmental conditions. Environmental variability occurs across a range of time scales from long-term climate and seasonal trends to short-term water flow mediated variations. Response of invasive aquatic plants are examined using controlled environment growth facilities at time scales of weeks, day, and hours using a combination of study duration and growth assessment techniques to assess water quality, temperature, nutrient, and light effects. These provide response parameters for plant growth models in response to the variation and interact with management and economic models associated with aquatic weed management. Plant growth models are informed by remote sensing and applied spatially across the Delta to balance location and type of aquatic plant, growth response to altered environments and phenology.

Sacramento-San Joaquin River Delta.v↗
DOE OSTI2020

System and method for thermally adaptive materials

An adaptive sheet that includes a first layer defining a first length, the first layer configured to assume a base configuration in response to a first environmental condition and assume a lofted configuration in response to a second environmental condition with the first layer being curled along the first length compared the base configuration. The first fabric layer includes a first material defining a second length and having a first expansion coefficient, and wherein the first material is configured to increasingly change length along the second length in response to the second environmental condition, and a second material defining a third length and having a second expansion coefficient that is different than the first expansion coefficient.

36 MATERIALS SCIENCE↗
NASA NTRS2001

Escalating trends in the urban metabolism of Hong Kong: 1971-1997

Urban metabolism measures quantitatively a city's load on the natural environment. We update the Newcombe et al. (3) pioneering study of Hong Kong's urban metabolism in 1971, highlighting trends in resource consumption and waste generation. Per capita food, water and materials consumption have surged since the early 1970s by 20%, 40%, and 149%, respectively. Tremendous pollution has accompanied this growing affluence and materialism, and total air emissions, CO2 outputs, municipal solid wastes, and sewage discharges have risen by 30%, 250%, 245%, and 153%. As a result, systemic overload of land, atmospheric and water systems has occurred. While some strategies to tackle deteriorating environmental quality have succeeded, greater and more far-reaching changes in consumer behavior and government policy are needed if Hong Kong is to achieve its stated goal of becoming "a truly sustainable city" in the 21st century.

Environmental Pollution↗
NASA NTRS2014

NASA's Advanced Environmental Barrier Coatings Development for SiC/SiC Ceramic Matrix Composites: Understanding Calcium Magnesium Alumino-Silicate (CMAS) Degradations and Resistance

Environmental barrier coatings (EBCs) and SiCSiC ceramic matrix composites (CMCs) systems will play a crucial role in next generation turbine engines for hot-section component applications because of their ability to significantly increase engine operating temperatures with improved efficiency, reduce engine weight and cooling requirements. The development of prime-reliant environmental barrier coatings is essential to the viability and reliability of the envisioned CMC engine component applications, ensuring integrated EBC-CMC system durability and designs are achievable for successful applications of the game-changing component technologies and lifing methodologies.This paper will emphasize recent NASA environmental barrier coating developments for SiCSiC turbine airfoil components, utilizing advanced coating compositions, state-of-the-art processing methods, and combined mechanical and environment testing and durability evaluations. The coating-CMC degradations in the engine fatigue-creep and operating environments are particularly complex; one of the important coating development aspects is to better understand engine environmental interactions and coating life debits, and we have particularly addressed the effect of Calcium-Magnesium-Alumino-Silicate (CMAS) from road sand or volcano-ash deposits on the durability of the environmental barrier coating systems, and how the temperature capability, stability and cyclic life of the candidate rare earth oxide and silicate coating systems will be impacted in the presence of the CMAS at high temperatures and under simulated heat flux conditions. Advanced environmental barrier coating systems, including HfO2-Si with rare earth dopant based bond coat systems, will be discussed for the performance improvements to achieve better temperature capability and CMAS resistance for future engine operating conditions.

Environmental barrier coatings↗
DOE OSTI2022

Analysis of Photovoltaic Energy: CRADA Number CRD-21-17862 (Cooperative Research and Development Final Report)

For this project, NREL will work with the Participant to model phase change material performance, model photovoltaic thermodynamics performance, and predict photovoltaic module durability based on environmental conditions to help develop optimized photovoltaic roofing designs. This project will develop thermodynamic models of integrated photovoltaic roofing with phase change materials. These models will be used to optimize the materials and design selections based on reducing photovoltaic operating temperatures while balancing cost effective integration of phase change materials.

14 SOLAR ENERGY↗
NASA NTRS1982

Area estimation of environmental phenomena from NOAA-n satellite data

A technique for documenting changes in size of NOAA-n pixels in order to calibrate the data for use in performing area calculations is described. Based on Earth-satellite geometry, a function for calculating the effective pixel size, measured in terms of ground area, on any given pixel was derived. The equation is an application of the law of sines plus an arclength formula. Effective pixel dimensions for NOAA 6 and 7 satellites for all pixels between nadir and the extreme view angles are presented. The NOAA 6 data were used to estimate the areas of several lakes, with an accuracy within 5%. Sources of error are discussed.

Tappan, G.↗
DOE OSTI2024

Stand Age and Climate Change Effects on Carbon Increments and Stock Dynamics

Carbon assimilation and wood production are influenced by environmental conditions and endogenous factors, such as species auto-ecology, age, and hierarchical position within the forest structure. Disentangling the intricate relationships between those factors is more pressing than ever due to climate change’s pressure. We employed the 3D-CMCC-FEM model to simulate undisturbed forests of different ages under four climate change (plus one no climate change) Representative Concentration Pathways (RCP) scenarios from five Earth system models. In this context, carbon stocks and increment were simulated via total carbon woody stocks and mean annual increment, which depends mainly on climate trends. We find greater differences among different age cohorts under the same scenario than among different climate scenarios under the same age class. Increasing temperature and changes in precipitation patterns led to a decline in above-ground biomass in spruce stands, especially in the older age classes. On the contrary, the results show that beech forests will maintain and even increase C-storage rates under most RCP scenarios. Scots pine forests show an intermediate behavior with a stable stock capacity over time and in different scenarios but with decreasing mean volume annual increment. These results confirm current observations worldwide that indicate a stronger climate-related decline in conifers forests than in broadleaves.

Forestry↗
NASA NTRS1992

Instrument configurations for the restructured Earth Observing System (EOS)

The Earth Observing System (EOS), the major NASA contribution to the U.S. Global Change Research Program, consists of a series of satellites with sensors designed to measure the crucial variables to monitor processes on the land, ocean, and atmosphere, a Data and Information System (EOSDIS) to analyze geophysical and biological products and distribute them to investigators, and a scientific research program. EOSDIS began in 1991 with organization of existing data sets, with the goal of a useful, accessible system in 1994. The launch of the first medium-size EOS platform will occur in 1998, with launches every 18 to 24 months and replacements every 5 years to provide a 15-year series of reliable scientific products. The selection of the instruments that comprise the payloads is designed to address the highest priority science/policy questions, as identified by the inter-agency Committee on Earth and Environmental Sciences (CEES) and the Intergovernmental Panel on Climate Change (IPCC).

Dozier, Jeff↗
NASA NTRS1986

Meso-beta scale perturbations of the wind field by thunderstorm cells

Data from the high density storm-scale rawinsonde network of the Severe Environmental Storms and Mesoscale Experiment revealed temporal and spatial changes in the divergence fields of the troposphere in response to severe storm evolution on May 2, 1979; these changes were detectable on the meso-beta scale. This unique set of data was subsequently used to study the evolution of the wind, divergence and vertical motion fields in the presence of intense convection. Mid- and upper-tropospheric divergence was superimposed over low-level convergence. The divergence, which has a maximum value of .0004/s, occurred 75 to 100 km upwind as well as over the tornadic cells. To the south of the storm cells, the kinematic pattern was in reverse, upper level convergence was superimposed over low-level divergence. A vertical motion doublet was found to ascend over the squall line and descend about 70 km south of the squall line. It is suggested that the following effects are accountable for the nature of the kinematic fields: (1) blocking of tropospheric environmental flow by the storm cells, (2) anvil outflows, particularly from the tornadic cells, and (3) divergence from the exit region of the jet stream.

Ulanski, S. L.↗
DOE OSTI2020

Stable Methane Isotopologues From Northern Lakes Suggest That Ebullition Is Dominated by Sub‐Lake Scale Processes

Abstract Stable isotopes have emerged as popular study targets when investigating emission of methane (CH 4 ) from lakes. Yet little is known on how isotopic patterns conform to variations in emission magnitudes—a highly relevant question. Here, we present a large multiyear data set on stable isotopes of CH 4 ebullition (bubbling) from three small adjacent subarctic lakes. The δ 13 C‐CH 4 and δD‐CH 4 range from −78.4‰ to −53.1‰ and from −369.8‰ to −218.8‰, respectively, and vary greatly among the lakes. The signatures suggest dominant hydrogenotrophic methanogenesis, particularly in the deep zones, but there are also signals of seemingly acetoclastic production in some high fluxing shallow areas, possibly fueled by in situ vegetation, but in‐sediment anaerobic CH 4 oxidation cannot be ruled out as an alternative cause. The observed patterns, however, are not consistent across the lakes. Neither do they correspond to the spatiotemporal variations in the measured bubble CH 4 fluxes. Patterns of acetoclastic and hydrogenotrophic production plus oxidation demonstrate that gains and losses of sediment CH 4 are dominated by sub‐lake scale processes. The δD‐CH 4 in the bubbles was significantly different depending on measurement month, likely due to evaporation effects. On a larger scale, our isotopic data, combined with those from other lakes, show a significant difference in bubble δD‐CH 4 between postglacial and thermokarst lakes, an important result for emission inventories. Although this characteristic theoretically assists in source partitioning studies, most hypothetical future shifts in δD‐CH 4 due to high‐latitude lake area or production pathway are too small to lead to atmospheric changes detectable with current technology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

PiCAM: A Raspberry Pi-based open-source, low-power camera system for monitoring plant phenology in Arctic environments

Time-lapse cameras have been widely used as a tool to monitor the timing of seasonal vegetation growth. These simple, relatively inexpensive systems can provide high-frequency observations of leaf development and demography which are critical data sets needed to characterize plant phenology from species to landscapes. This is important for understanding how plants are responding to global changes, as well as for validating satellite-derived phenology products. However, in remote regions including the high-latitude Arctic, deploying time-lapse cameras could be challenging. The remoteness and lack of widespread power and telecommunications infrastructure limit options for the installation, maintenance and retrieval of data and equipment, and make it difficult for cameras to survive in extreme weather (e.g. long cold winters). To improve our understanding of Arctic phenology, new technologies are required to address these challenges. Here, we present a novel, low-power, compact, lightweight time-lapse camera system, called power-interval camera automation module (PiCAM). The PiCAM was designed with explicit consideration to simplify deployment (i.e. without a need for external power supplies) of camera systems and to address the challenges of camera survival in harsh Arctic environments. In this paper, we describe the design, setup and technical details of the PiCAM and provide a roadmap for how to build and operate these systems. As proof of concept, we deployed 26 PiCAMs at three low-Arctic tundra sites on the Seward Peninsula, Alaska in early August 2021 for characterizing Arctic plant phenology. Of the 26 PiCAMs, 70% remained active at the point of our revisit in late July 2022 despite the extreme winter temperatures they experienced (< –30°C, heavy snow cover). We extracted key plant phenology metrics from the PiCAMs and captured strong differences across key Arctic plant species. We showed that the PiCAM has the potential to be widely used for monitoring plant phenology across the broader Arctic region, addressing the need for ground-based understanding of Arctic phenological diversity to develop knowledge of plant response to climate change and to validate remote sensing products.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Condition assessment of cable insulation materials in advanced reactor environments

While existing cable insulation materials are sufficient for use in the current reactor fleet, environmental conditions inside some advanced reactors, such as small modular reactors, will be substantially harsher. The work herein was conducted to assess the performance and overall survivability of several high-temperature, radiation resistant insulation polymers in a simulated small modular reactor environment. The materials evaluated under this research include polyether ether ketone, polyimide, and silicone rubber. These polymers were subjected to 1000 h of environmental stress exposure under two different conditions: 1) high temperature (i.e., 250 °C) in atmospheric pressure and 2) high temperature in a low-pressure vacuum (i.e., less than 2 psia). During the environmental exposure process, each insulation was periodically tested using several materials characterization techniques including Fourier transform infrared spectroscopy, oxidation induction time, and oxidation induction temperature. The objective of this testing was to assess and monitor changes that occurred in the thermal and chemical properties of the materials during the environmental exposures. The overall survivability of each insulation was assessed based on these property changes. The results of this research revealed that the polyimide and polyether ether ketone insulations had significantly better thermal and chemical stability than the silicone rubber during both the high-temperature atmospheric and vacuum exposures. Both polyimide and polyether ether ketone experienced minimal reductions in their chemical and thermal properties over the course of 1000 h in the simulated environments. Finally, based on this research, polyimide and polyether ether ketone show promise as potential base materials for small modular reactor cable insulation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Mechanistic Simulations Suggest Riparian Restoration Can Partly Counteract Climate Impacts to Juvenile Salmon

Climate change is reducing summertime water availability and elevating water temperature, placing human consumptive needs in competition with needs of coldwater fishes. Here we worked with natural resource managers in the Snoqualmie River (Washington, USA) to develop riparian management scenarios, and used a process-based modeling system to examine how a threatened population of Chinook salmon (Oncorhynchus tschawytcha) may respond to climate change and whether riparian restoration could reduce climate effects. Linking models of global climate, regional hydrology and water temperature, and fish, we projected that streams would become warmer year-round and drier during summer, further stressing salmon. Climate change accelerated egg emergence, increased juvenile growth and survival, and accelerated outmigration of sub-yearling migrants. Growth was depressed for salmon remaining instream during summer (potential yearling migrants). Riparian restoration counteracted ~10% of summer increases in water temperature, and affected salmon similarly regardless of whether riparian buffers were partially or fully restored, whereas riparian degradation further warmed streams. Riparian restoration fully mitigated climate change effects on potential yearling migrant size, but only minimally affected sub-yearling migrants (assessment metrics changed <2%). Our results will be useful for watershed managers in aligning priorities for fish and humans and our framework can be applied elsewhere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Material efficiency and climate change mitigation of passenger vehicles

A transition to electric vehicles and renewable energy is currently underway but may not be rapid enough in order to reach ambitious climate change mitigation targets. Therefore, additional, preferably instantaneous, measures are needed for quick emissions reductions, which is where material efficiency (ME) could constitute a promising solution. ME strategies include but are not limited to vehicle lightweighting through material substitution, increased recycling of materials, reuse and remanufacturing of vehicle components, vehicle downsizing (switching to a smaller vehicle) and more intensive use by means of increased vehicle occupancy through sharing practices. While recent analyses have focused on a narrow subset of these, we find striking differences in the overall potential of different strategies to decrease vehicular carbon footprints. Downsizing and more intensive use offer the largest mitigation potential but strongly depend on consumer behavior and are highly sensitive to modeling assumptions. Combined, the analyzed strategies can achieve emission reductions of up to 57% over the life cycle of a single vehicle, which is comparable to up to 83% achieved through a shift to low-carbon energy supply. ME can cut carbon footprints of already efficient vehicles charging renewable electricity by half again. This makes ME both an excellent short-term solution for climate change mitigation targeting the light vehicle sector but also an important complementary strategy to the long-term transition towards electric vehicles and renewable energy supply.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Modeling Atmospheric Science Knowledge from Research Publications

NASA Earth Science Data Centers contain enormous amounts of remote sensing digital data. It is often a significant challenge for users to find data suitable for their research topic in these vast archives. One of the approaches is the usage-driven dataset discovery, where users seek publications on projects similar to their intended study. For this approach to be effective, users need a clear connection between the underlying data in the publications and the study objectives; this is not often apparent to non-expert users. Tools and methodologies that can help facilitate and organize these connections are therefore valuable for creating improved knowledge mappings, which can be further used by search engines to suggest data or publications best tailored to a user’s specific research goal. As an illustration of these challenges, in this work we focus on the atmospheric chemistry processes related to Earth environmental impacts such as ozone depletion, aerosols, smog formation, acid rain, and radiative forcing. We further limit our study to publications that use data from the Microwave Limb Sounder (MLS) instrument flown on the Aura Earth Observing System. To create knowledge representations of science carried out in these publications, we use existing ontologies such as the Global Change Master Directory (GCMD) and Semantic Web for Earth and Environmental Terminology (SWEET). These ontologies together encompass term dictionaries that include measured variables, names of molecules or radicals, mission and instrument names, locations, action words, among many others. Based on these terms acknowledge graph database was populated with the terms retrieved from scientific publications that study atmospheric chemistry. These databases can be used to further enhance the automation of knowledge discovery and facilitate machine learning and artificial intelligence algorithms or applications. These tools and methods can also be extended to apply to content from other related Earth science domains.

Irina Gerasimov↗