Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic transformers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Toward demonstrating controlled-X operation based on continuous-variable four-partite cluster states and quantum teleporters

One-way quantum computation based on measurement and multipartite cluster entanglement offers the ability to perform a variety of unitary operations only through different choices of measurement bases. Here we present an experimental study toward demonstrating the controlled-X operation, a two-mode gate in which continuous variable (CV) four-partite cluster states of optical modes are utilized. Two quantum teleportation elements are used for achieving the gate operation of the quantum state transformation from input target and control states to output states. By means of the optical cluster state prepared off-line, the homodyne detection and electronic feeding forward, the information carried by the input control state is transformed to the output target state. The presented scheme of the controlled-X operation based on teleportation can be implemented nonlocally and deterministically. The distortion of the quantum information resulting from the imperfect cluster entanglement is estimated with the fidelity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization of reaction conditions in selective oxidation of styrene over fine crystallite spinel-type CaFe{sub 2}O{sub 4} complex oxide catalyst

The CaFe{sub 2}O{sub 4} spinel-type catalyst was synthesized by citrate gel method and well characterized by thermogravimetric analysis, atomic absorption spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and transmission electron microscopy. The crystallization temperature of the spinel particle prepared by citrate gel method was 600 {sup o}C which was lower than that of ferrite prepared by other methods. CaFe{sub 2}O{sub 4} catalysts prepared by citrate gel method show better activity for styrene oxidation in the presence of dilute H{sub 2}O{sub 2} (30%) as an oxidizing agent. In this reaction the oxidative cleavage of carbon-carbon double bond of styrene takes place selectively with 38 {+-} 2 mol% conversion. The major product of the reaction is benzaldehyde up to 91 {+-} 2 mol% and minor product phenyl acetaldehyde up to 9 {+-} 2 mol%, respectively. The products obtained in the styrene oxidation reaction were analyzed by gas chromatography and mass spectroscopy. The influence of the catalyst, reaction time, temperature, amount of catalyst, styrene/H{sub 2}O{sub 2} molar ratio and solvents on the conversion and product distribution were studied.

36 MATERIALS SCIENCE↗

Insights into the Oxidation Mechanism of Vivianite to Metavivianite from First-Principles Calculations

Vivianite, a hydrous ferrous iron-phosphate mineral (Fe 3 (PO 4 ) 2 ·8H 2 O), readily oxidizes in contact with air yielding the less hydrous mixed-valent iron-phosphate mineral metavivianite. This topotactic transformation nominally occurs by oxidative dehydrogenation in which outgoing electrons from the iron sublattice are charge compensated by hydrolysis of structural water. However, the details of this internal charge balancing mechanism that allows the structure to remain electrostatically stable remain unknown. Here, in this study, we use density functional theory (DFT) calculations and ab initio thermodynamics (AIT) to evaluate the energetics of this process in terms of hydrogen release as a function of environmental variables such as partial pressure and temperature. The results show a thermodynamic driving force for vivianite phase transformation as oxidation progresses that is triggered by its rigid structure that has a limited accommodation for hydrogen vacancies. In contrast, metavivianite has a more flexible lattice and hydrogen bond network that stabilizes these hydrogen defects. Metavivianite is shown to be a stable intermediate for 66% residual Fe 2+ down to 33% Fe 2+ , below which other phases/structures such as santabarbarite should be more thermodynamically favorable. Our study provides a basis for experimental tests of our mechanistic findings and helps fill a basic knowledge gap about the solid-state process that defines how vivianite interacts with its surrounding environment.

Sassi, Michel [Pacific Northwest National Laborato↗

Electronic origin of reorganization energy in interfacial electron transfer

Electron transfer (ET) reactions underpin energy conversion and chemical transformations in both biological and a biological systems. The efficiency of any ET process relies on achieving a desired ET rate within an optimal driving force range. Marcus theory provides a microscopic framework for understanding the activation free energy—and therefore the rate—of ET in terms of a key parameter: the reorganization energy. For electrified solid–liquid interfaces, it has long been conventionally understood that only factors in the electrolyte phase are responsible for determining the reorganization energy and that the electronic density of states (DOS) of the electrode only serves to dictate the number of thermally accessible channels for ET. Here we show instead that the electrode DOS plays a central role in governing the reorganization energy, far outweighing its conventionally assumed role. Using atomically layered heterostructures, we tune the DOS of graphene and measure outer-sphere ET kinetics. We find the ensuing variation in ET rate arises from strong modulation in a reorganization energy associated with image potential localization in the electrode. Here we redefine the traditional paradigm of heterogeneous ET kinetics, revealing a deeper role of the electrode electronic structure in interfacial reactivity.

Electrochemistry↗

High-pressure Evolution of Fe2O3 Electronic Structure Revealed by X-ray Absorption

We report the high-pressure measurement of the Fe K edge in hematite (Fe{sub 2}O{sub 3}) by x-ray absorption spectroscopy in partial fluorescence yield geometry. The pressure-induced evolution of the electronic structure as Fe{sub 2}O{sub 3} transforms from a high-spin insulator to a low-spin metal is reflected in the x-ray absorption pre-edge. The crystal-field splitting energy was found to increase monotonically with pressure up to 48 GPa, above which a series of phase transitions occur. Atomic multiplet, cluster diagonalization, and density-functional calculations were performed to simulate the pre-edge absorption spectra, showing good qualitative agreement with the measurements. The mechanism for the pressure-induced electronic phase transitions of Fe{sub 2}O{sub 3} is discussed and it is shown that ligand hybridization significantly reduces the critical high-spin/low-spin transition pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable magnetic and magnetocaloric properties of La{sub 0.6}Sr{sub 0.4}MnO{sub 3} nanoparticles

Nanoparticles of La{sub 0.6}Sr{sub 0.4}MnO{sub 3} with different particle sizes are synthesized by the nitrate-complex auto-ignition method. The structural and magnetic properties of the samples are investigated by X-Ray diffraction (XRD), Fourier transform infra-red (FT-IR) spectroscopy, transmission electron microscopy (TEM), and DC magnetization measurements. The XRD study coupled with the Rietveld refinement shows that all samples crystallize in a rhombohedral structure with the space group of R-3 C. The FT-IR spectroscopy and TEM images indicate formation of the perovskite structure with the average sizes of 20, 40, and 100 nm for the samples sintered at 700, 800, and 1100 °C, respectively. The DC magnetization measurements confirm tuning of the magnetic properties due to the particle size effects, e.g., reduction in the ferromagnetic moment and increase in the surface spin disorder by decreasing the particle size. The magnetocaloric effect (MCE) study based on isothermal magnetization vs. filed measurements in all samples reveals a relatively large MCE around the Curie temperature of the samples. The peak around the Curie temperature gradually broadens with reduction of the particle size. The data obtained show that although variations in the magnetic entropy and adiabatic temperature decrease by lowering the particle size, variation in the relative cooling power values are the same for all samples. These results make this material a proper candidate in the magnetic refrigerator application above room temperature at moderate fields.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Swift heavy-ion irradiation-induced shape and structural transformation in cobalt nanoparticles

The shape and structural evolution of Co nanoparticles embedded in SiO{sub 2} and subjected to swift heavy-ion irradiation have been investigated over a wide energy and fluence range. Modifications of the nanoparticle size and shape were characterized with transmission electron microscopy and small-angle x-ray scattering. Nanoparticles below a threshold diameter remained spherical in shape and progressively decreased in size under irradiation due to dissolution. Nanoparticles above the threshold diameter transformed into nanorods with their major dimension parallel to the incident ion direction. Modifications of the atomic-scale structure of the Co nanoparticles were identified with x-ray absorption spectroscopy. Analysis of the x-ray absorption near-edge spectra showed that prior to irradiation all Co atoms were in a metallic state, while after irradiation Co atoms were in both oxidized and metallic environments, the former consistent with dissolution. The evolution of the nanoparticle short-range order was determined from extended x-ray absorption fine structure spectroscopy. Structural changes in the Co nanoparticles as a function of ion fluence included an increase in disorder and asymmetric deviation from a Gaussian interatomic distance distribution coupled with a decrease in bondlength. Such changes resulted from the irradiation-induced decrease in nanoparticle size and subsequent dissolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and magnetic properties of triethylene glycol stabilized Zn{sub x}Co{sub 1−x}Fe{sub 2}O{sub 4} nanoparticles

Highlights: ► Monodispersed TREG stabilized Zn{sub x}Co{sub 1−x}Fe{sub 2}O{sub 4} NP's were prepared via hydrothermal method. ► Zn{sub x0.6}Co{sub 0.4}Fe{sub 2}O{sub 4} NP's has superparamagnetic behavior like absence of saturation at high fields. ► The lattice parameter (a{sub o}) increases linearly with the addition of Zn and follows Vegard's law. -- Abstract: Zn substituted cobalt ferrite nanoparticles having formula of Zn{sub x}Co{sub 1−x}Fe{sub 2}O{sub 4} (x = 0.0–1.0) were prepared by hydrothermal technique. In this process, triethylene glycol was used as a solvent and surfactant, anhydrous sodium hydroxide was used as an alkalinity additive. Investigation of the structural, morphological and thermal properties were carried out using X-ray diffraction (XRD), infrared spectroscopy (FT-IR), transmission electron spectroscopy (TEM) and thermal analysis (TGA) respectively. The X-ray diffraction study reveals that the lattice constant of cobalt ferrite increases with the increase of Zn content. Magnetization measurements showed that as zinc concentration increases saturation magnetization initially stays constant and then decreases monotically. Samples having high zinc concentration (x ≥ 0.6) have superparamagnetic behavior like absence of saturation at high fields, low saturation magnetization values and immeasurable coercivity. These features were explained by surface spin disorder and canted spins.

36 MATERIALS SCIENCE↗

A study of photocatalytic graphene–TiO{sub 2} synthesis via peroxo titanic acid refluxed sol

Graphical abstract: - Highlights: • TiO{sub 2} synthesized via PTA as a precursor demonstrates exclusively anatase phase. • The TEM image of GR–TiO{sub 2} (PTA) demonstrates that TiO{sub 2} nanoparticles are successfully loaded onto graphene sheet. • The specific surface area seems to increase with increasing weight ratio of graphene oxide. It was observed that GR–TiO{sub 2} showed higher adsorption compared to bare TiO{sub 2} (PTA). • The GR–TiO{sub 2} (PTA, 1:50) catalyst showed higher photocatalytic activity than any other catalyst. - Abstract: In the present work, graphene–TiO{sub 2} (GR–TiO{sub 2}) photocatalyst with various weight ratios of graphene was synthesized using peroxo titanic acid solution (PTA) as a precursor for TiO{sub 2}. Graphene oxide prepared by Hummer's method was converted to graphene under ultraviolet (UV) irradiation in ethanol–water solvent for 48 h. The as-prepared GR–TiO{sub 2} composites were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, UV–vis spectrophotometry, and transmission electron microscopy (TEM). The automated potentiostat was applied to measure the photocurrent generations of prepared catalysts. The photocatalytic activities of GR–TiO{sub 2} (PTA) catalysts were determined by measuring the percentage methylene blue (MB) degradation. The results showed that TiO{sub 2} nanoparticles were successfully loaded onto graphene sheet and the surface area of catalysts increased with increasing weight ratio of graphene. In addition, GR–TiO{sub 2} (PTA, 1:50) exhibited the highest photocatalytic activity among the catalysts under UV and visible light irradiation. The adsorption edge of GR–TiO{sub 2} was shifted to a longer wavelength of 400 nm in comparison with that of pure TiO{sub 2} (PTA). The increase in the photocatalytic performance of GR–TiO{sub 2} (PTA) catalyst may be attributed to the increase in surface area, the extension of light absorption in the visible light region, and prevention of charge recombination.

36 MATERIALS SCIENCE↗

Dynamics and structure of the B2→B19’ phase transformation in NiTi revealed through in situ 4D-STEM

The structural evolution of NiTi during the B2→B19’ martensitic phase transformation via thermal cycling is investigated using in situ four dimensional scanning transmission electron microscopy (4D-STEM). With 4D-STEM, we can directly visualize and quantify the nanoscale evolution of the martensitic structure on thermal cycling and also investigate the origin of diffuse scattering of NiTi in the pre-transitional state. Mapping of the martensite orientation and strain visualizes the progression of the transformation front and self-accommodation of the B19’ structure. Diffuse streaking and strain are measured in the pre-transitional austenite (B2) phase and demonstrate no localization or preferential directionality hinting that long-range homogeneous instability rather than nanoscale heterogeneities may be the origin of the pre-transitional anomalies in NiTi. Finally, it is revealed that NiTi does not reform the same martensite nanostructure on thermal cycling but does express similar features. This small variation is likely owing to transformation-induced dislocations.

36 MATERIALS SCIENCE↗

Fabrication and characterization of a novel β metastable Ti-Mo-Zr alloy with large ductility and improved yield strength

Highlights: • Ti-12Mo-5Zr alloy exhibits excellent combination of improved yielding strength (>650 MPa), high ductility (uniform elongation ≈30%) and work-hardening behaviour. • The superior performances arise from the synergic effects between phase transformation induced plasticity and twinning induced plasticity. • The ‘d-electron’ alloy design approach in Ti-12Mo-5Zr alloy, i.e. Zr substitution to Ti, validates the feasibility of yielding stress improvement of TWIP/TRIP titanium alloys. - Abstract: In this paper, a novel ternary β-metastable titanium alloy, Ti-12Mo-5Zr (wt%), was designed based on the “d-electron” alloy design theory. The Ti-12Mo-5Zr alloy displays excellent combination of improved yielding stress (>650 MPa), high ductility (uniform elongation ≈30%) and work-hardening behaviour. The detailed microstructural analysis indicates that the superior performances arise from the synergic effects between phase transformation induced plasticity (TRIP) and twinning induced plasticity (TWIP). Conforming to the design strategy, the improvement of mechanical performance results from the addition of Zr alloying element in substituting Ti, attributing to solution hardening effect and the increasing of critical resolved shear stress (CRSS) of stress induced martensitic transformation (SIM α″).

36 MATERIALS SCIENCE↗

Interpreting Electrochemical and Chemical Sodiation Mechanisms and Kinetics in Tin Antimony Battery Anodes Using in Situ Transmission Electron Microscopy and Computational Methods

Intermetallic compounds such as SnSb are promising anode materials for sodium ion batteries; however, their nanoscale sodiation mechanisms are not well understood. Here, we used a combination of in situ transmission electron microscopy (TEM), first-principles electronic structure calculations, computational thermodynamic modeling, and phase-field simulations to reveal the sodiation mechanisms and to quantify microstructural effects contributing to the underlying reaction kinetics in SnSb electrodes. During in situ sodiation experiments, the nanocrystalline SnSb thin films underwent a rapid amorphous phase transformation upon sodiation, as determined by in situ TEM and electron diffraction experiments. The Na + diffusion coefficients were measured with and without an external electrical bias, and the data showed that an applied potential increased Na + diffusion by an order of magnitude compared to solid-state diffusion. Furthermore, there was a distinct decrease in sodium diffusion upon the formation of the amorphous phase that resulted from a change in the local structure and grain boundaries. To further understand how the Na + transport mechanism correlated with the changes observed in the SnSb thin films, phase-field modeling was used, which considered sodium diffusion within the grain boundaries together with their evolution and stress–strain state. As a result, these findings enhance our understanding of sodiation mechanisms within intermetallic anode materials for sodium ion battery applications.

25 ENERGY STORAGE↗

Fabrication of DNA/Hydroxyapatite nanocomposites by simulated body fluid for gene delivery

The hydroxyapatite (HA) formation on the surface of DNA molecules in simulated body fluid (SBF) was examined. The osteoconductivity is estimated using SBF having ion concentrations approximately equal to those of human blood plasma. After immersion for 4 weeks in SBF at 36.5 °C, the HA crystallites possessing 1-14 micrometer in diameter grew on the surface of DNA molecules. The leaf flake-like and spherical shapes morphologies were observed through scanning electron microscopy analysis. Original peaks of both of DNA and HA were characterized by fourier transform infrared spectroscopy. The Ca/P ratio (1.1-1.5) in HA was estimated by energy dispersive X-ray analysis. After biomineralization, the calculated weight ratio of DNA/HA was 18/82 by thermogravimetry/differential thermal analysis. The molecular orbital computer simulation has been used to probe the interaction of DNA with two charge-balancing ions, CaOH{sup +} and CaH{sub 2}PO{sub 4}{sup +}. The adsorption enthalpy of the two ions on DNA having negative value was the evidence for the interface in mineralization of HA in SBF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of nitrogen doped TiO{sub 2} photocatalyst by oxidation of titanium nitride with H{sub 2}O{sub 2}

Highlights: {yields} N-doped TiO{sub 2} are prepared by hydrothermally treating TiN with H{sub 2}O{sub 2}. {yields} The content of N in TiO{sub 2} can be controlled by the concentration of H{sub 2}O{sub 2}. {yields} The as-prepared N-TiO{sub 2} shows higher photocatalytic activity under visible light. -- Abstract: Nitrogen doped anatase TiO{sub 2} (N-TiO{sub 2}) were prepared by hydrothermally treating TiN with H{sub 2}O{sub 2}. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), UV-vis diffuse reflectance spectrum (DRS), Fourier transform infrared spectra (FT-IR) and X-ray photoelectron spectroscopy (XPS) techniques. The results confirmed that the hydrothermal oxidation is an effective method to prepare N-doped TiO{sub 2} anatase. The nitrogen concentration in TiO{sub 2} could be controlled by the concentration of H{sub 2}O{sub 2} solution. Photocatalytic degradation of methyl orange (MO) was carried out under visible light and UV-visible light irradiation, respectively. The as-prepared optimal N-TiO{sub 2} showed higher photocatalytic activity than N-P25 and P25, and exhibited excellent reusability.

36 MATERIALS SCIENCE↗

Fabrication of hollow mesoporous NiO hexagonal microspheres via hydrothermal process in ionic liquid

Highlights: Black-Right-Pointing-Pointer Ni(OH){sub 2} precursors were synthesized in ionic liquid and water solution by hydrothermal method. Black-Right-Pointing-Pointer NiO hollow microspheres were prepared by thermal treatment of Ni(OH){sub 2} precursors. Black-Right-Pointing-Pointer NiO hollow microspheres were self-assembled by mesoporous cubic and hexagonal nanocrystals with high specific surface area. Black-Right-Pointing-Pointer The mesoporous structure is stable at 773 K. Black-Right-Pointing-Pointer The ionic liquid absorbed on the O-terminate surface of the crystals to form hydrogen bond and played key roles in determining the final shape of the NiO novel microstructure. -- Abstract: The novel NiO hexagonal hollow microspheres have been successfully prepared by annealing Ni(OH){sub 2}, which was synthesized via an ionic liquid-assisted hydrothermal method. The samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), N{sub 2} adsorption-desorption and Fourier transform infrared spectrometer (FTIR). The results show that the hollow NiO microstructures are self-organized by mesoporous cubic and hexagonal nanocrystals. The mesoporous structure possessed good thermal stability and high specific surface area (ca. 83 m{sup 2}/g). The ionic liquid 1-butyl-3methylimidazolium tetrafluoroborate ([Bmim][BF{sub 4}]) was found to play a key role in controlling the morphology of NiO microstructures during the hydrothermal process. The special hollow mesoporous architectures will have potential applications in many fields, such as catalysts, absorbents, sensors, drug-delivery carriers, acoustic insulators and supercapacitors.

36 MATERIALS SCIENCE↗

Phase transition in BC[subscript x] system under high-pressure and high-temperature: Synthesis of cubic dense BC[subscript 3] nanostructured phase

We synthesized a cubic BC{sub 3} (c-BC{sub 3}) phase, by direct transformation from graphitic phases at a pressure of 39 GPa and temperature of 2200 K in a laser-heated diamond anvil cell. A combination of x-ray diffraction, electron diffraction, transmission electron microscopy (TEM) imaging, and electron energy loss spectroscopy (EELS) measurements lead us to conclude that the obtained phase is hetero-nano-diamond, c-BC{sub 3}. High-resolution TEM imaging of the c-BC{sub 3} specimen recovered at ambient conditions demonstrates that the c-BC{sub 3} is a single, uniform, nanocrystalline phase with a grain size of about 3-5 nm. The EELS measurements show that the atoms inside the cubic structure are bonded by sp{sup 3} bonds. The zero-pressure lattice parameter of the c-BC{sub 3} calculated from diffraction peaks was found to be a = 3.589 {+-} 0.007 {angstrom}. The composition of the c-BC{sub 3} is determined from EELS measurements. The ratio of carbon to boron, C/B, is approximately 3 (2.8 {+-} 0.7).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

QED corrections of order alpha(Zalpha){sup 2}E{sub F} to the hyperfine splitting of P{sub 1/2} and P{sub 3/2} states in hydrogenlike ions

The hyperfine structure (HFS) of a bound electron is modified by the self-interaction of the electron with its own radiation field. This effect is known as the self-energy correction. In this work, we discuss the evaluation of higher order self-energy corrections to the HFS of bound P states. These are expressed in a semianalytic expansion involving powers of Zalpha and ln(Zalpha), where Z is the nuclear charge number and alpha is the fine-structure constant. We find that the correction of relative order alpha (Zalpha){sup 2} involves only a single logarithm ln(Zalpha) for P{sub 1/2} states [but no term of order alpha (Zalpha){sup 2}ln{sup 2}(Zalpha)], whereas for P{sub 3/2} states, even the single logarithm vanishes. By a Foldy-Wouthuysen transformation, we identify a nuclear-spin-dependent correction to the electron's transition current, which contributes to the HFS of P states. A comparison of the obtained analytic results to a numerical approach is made.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Photocatalytic degradation of gaseous toluene over TiO{sub 2}-SiO{sub 2} composite nanotubes synthesized by sol-gel with template technique

Graphical abstract: TiO{sub 2}-SiO{sub 2} nanotubes (b) were fabricated by sol-gel method using ZnO nanowires (a) as template. Highlights: Black-Right-Pointing-Pointer A simple method to prepare TiO{sub 2}-SiO{sub 2} nanotubes for photocatalytic toluene removal. Black-Right-Pointing-Pointer The TiO{sub 2}-SiO{sub 2} nanotubes have a small blue shift and higher absorption intensity. Black-Right-Pointing-Pointer The TiO{sub 2}-SiO{sub 2} nanotubes have an enhanced photoactivity in degrading gaseous toluene. -- Abstract: TiO{sub 2}-SiO{sub 2} composite nanotubes were successfully synthesized by a facile sol-gel technique utilizing ZnO nanowires as template. The nanotubes were well characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, N{sub 2} adsorption-desorption analysis and UV-vis diffuse reflectance spectroscopy. The nanotubular TiO{sub 2}-SiO{sub 2} composite photocatalysts showed diameter of 300-325 nm, fine mesoporous structure and high specific surface area. The results indicated that the degradation efficiency of gaseous toluene could get 65% after 4 h reaction using the TiO{sub 2}-SiO{sub 2} composite as the photocatalyst under UV light illumination, which was higher than that of P25.

36 MATERIALS SCIENCE↗