Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic structure method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Monte Carlo configuration interaction with perturbation corrections for dissociation energies of first row diatomic molecules: C{sub 2}, N{sub 2}, O{sub 2}, CO, and NO

Dissociation energies for the diatomic molecules C{sub 2}, N{sub 2}, O{sub 2}, CO, and NO are estimated using the Monte Carlo configuration interaction (MCCI) and augmented by a second order perturbation theory correction. The calculations are performed using the correlation consistent polarized valence “triple zeta” atomic orbital basis and resulting dissociation energies are compared to coupled cluster calculations including up to triple excitations (CCSDT) and Full Configuration Interaction Quantum Monte Carlo (FCIQMC) estimates. It is found that the MCCI method readily describes the correct behavior for dissociation for the diatomics even when capturing only a relatively small fraction (∼80%) of the correlation energy. At this level only a small number of configurations, typically O(10{sup 3}) from a FCI space of dimension O(10{sup 14}), are required to describe dissociation. Including the perturbation correction to the MCCI estimates, the difference in dissociation energies with respect to CCSDT ranges between 1.2 and 3.1 kcal/mol, and the difference when comparing to FCIQMC estimates narrows to between 0.5 and 1.9 kcal/mol. Discussions on MCCI's ability to recover static and dynamic correlations and on the form of correlations in the electronic configuration space are presented.

74 ATOMIC AND MOLECULAR PHYSICS↗

High spin-filter efficiency and Seebeck effect through spin-crossover iron–benzene complex

Electronic structures and coherent quantum transport properties are explored for spin-crossover molecule iron-benzene Fe(Bz){sub 2} using density functional theory combined with non-equilibrium Green’s function. High- and low-spin states are investigated for two different lead-molecule junctions. It is found that the asymmetrical T-shaped contact junction in the high-spin state behaves as an efficient spin filter while it has a smaller conductivity than that in the low-spin state. Large spin Seebeck effect is also observed in asymmetrical T-shaped junction. Spin-polarized properties are absent in the symmetrical H-shaped junction. These findings strongly suggest that both the electronic and contact configurations play significant roles in molecular devices and metal-benzene complexes are promising materials for spintronics and thermo-spintronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density functional theory based study of chlorine doped WS{sub 2}-metal interface

Investigation of a transition metal dichalcogenide (TMD)-metal interface is essential for the effective functioning of monolayer TMD based field effect transistors. In this work, we employ the Density Functional Theory calculations to analyze the modulation of the electronic structure of monolayer WS{sub 2} with chlorine doping and the relative changes in the contact properties when interfaced with gold and palladium. We initially examine the atomic and electronic structures of pure and doped monolayer WS{sub 2} supercell and explore the formation of midgap states with band splitting near the conduction band edge. Further, we analyze the contact nature of the pure supercell with Au and Pd. We find that while Au is physiosorbed and forms n-type contact, Pd is chemisorped and forms p-type contact with a higher valence electron density. Next, we study the interface formed between the Cl-doped supercell and metals and observe a reduction in the Schottky barrier height (SBH) in comparison to the pure supercell. This reduction found is higher for Pd in comparison to Au, which is further validated by examining the charge transfer occurring at the interface. Our study confirms that Cl doping is an efficient mechanism to reduce the n-SBH for both Au and Pd, which form different types of contact with WS{sub 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental realization of neutron helical waves

Methods of preparation and analysis of structured waves of light, electrons, and atoms have been advancing rapidly. Despite the proven power of neutrons for material characterization and studies of fundamental physics, neutron science has not been able to fully integrate these techniques because of small transverse coherence lengths, the relatively poor resolution of spatial detectors, and low fluence rates. Here, we demonstrate methods that are practical with the existing technologies and show the experimental achievement of neutron helical wavefronts that carry well-defined orbital angular momentum values. We discuss possible applications and extensions to spin-orbit correlations and material characterization techniques.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Auxiliary-field quantum Monte Carlo method for strongly paired fermions

We solve the zero-temperature unitary Fermi gas problem by incorporating a BCS importance function into the auxiliary-field quantum Monte Carlo method. We demonstrate that this method does not suffer from a sign problem and that it increases the efficiency of standard techniques by many orders of magnitude for strongly paired fermions. We calculate the ground-state energies exactly for unpolarized systems with up to 66 particles on lattices of up to 27{sup 3} sites, obtaining an accurate result for the universal parameter {xi}. We also obtain results for interactions with different effective ranges and find that the energy is consistent with a universal linear dependence on the product of the Fermi momentum and the effective range. This method will have many applications in superfluid cold atom systems and in both electronic and nuclear structures where pairing is important.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diffusion of oxygen in uranium dioxide: A first-principles investigation

Results of ab initio density-functional theory calculations of the migration energies of oxygen vacancies and interstitials in stoichiometric UO{sub 2} are reported. The diffusion of oxygen vacancies in UO{sub 2} is found to be highly anisotropic, and the [1 0 0] direction is energetically favored. The atomic relaxations play an important role in reducing the migration barriers. Within the generalized gradient approximation (GGA), we find that the migration energies of the preferred vacancies and interstitials paths are, respectively, 1.18 and 1.09 eV. With the inclusion of the Hubbard U parameter to account for the 5f electron correlations in GGA+U, the vacancy migration energy is lowered to 1.01 eV while the interstitial migration energy increases slightly to 1.13 eV. We find, however, that the correlation effects have a drastic influence on the mechanism of interstitial migration through the stabilization of Willis-type clusters. Indeed, in contrast to GGA, in GGA+U there is an inversion of the migration path with the so-called 'saddle-point' position being lower in energy than the usual starting position. Thus while the migration barriers are nearly the same in GGA and GGA+U, the mechanisms are completely different. Our results clearly indicate that both vacancies and interstitials contribute almost equally to the diffusion of oxygen in UO{sub 2}.

36 MATERIALS SCIENCE↗

Amino-siloxane composition and methods of using the same

An amino-siloxane composition is presented. The amino-siloxane composition includes structure (I): ##STR00001## wherein R 1 is independently at each occurrence a C 1 -C 5 aliphatic radical; R 2 is a C 3 -C. 4 aliphatic radical; R 3 is a C 1 -C 5 aliphatic radical or R 4 , wherein R 4 comprises structure (II): ##STR00002## and X is an electron donating group. Methods of reducing an amount of carbon dioxide in a process stream using the amino-siloxane composition are also presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved crystalline properties of laser molecular beam epitaxy grown SrTiO{sub 3} by rutile TiO{sub 2} layer on hexagonal GaN

Epitaxial SrTiO{sub 3} films were fabricated by laser molecular beam epitaxy on bare and TiO{sub 2} buffered GaN(0002), respectively. The whole deposition processes were in situ monitored by reflection high energy electron diffraction (RHEED). X-ray diffraction (XRD) was carried out to study the growth orientation and crystalline quality of STO films. The interfacial characters and epitaxial relationships were also investigated by high revolution transition electron microscope and selected area electron diffraction (SAED). According to the RHEED observation, the lowest epitaxy temperature of STO on TiO{sub 2} buffered GaN was decreased compared with the direct deposited one. The epitaxial relationship was (111)[110]STO//(0002)[1120]GaN in both cases as confirmed by RHEED, XRD, and SAED. The full width at half maximum of omega-scan and PHI-scan of STO on TiO{sub 2} buffered GaN was reduced compared with that deposited on bare GaN, indicating that epitaxial quality of STO film is improved by inserting TiO{sub 2} layer. In summary, the lattice mismatch was reduced by inserting rutile TiO{sub 2}. As a result, the crystalline temperature was reduced and enhanced epitaxial quality of STO thin film was obtained.

36 MATERIALS SCIENCE↗

K{sub 1.33}Mn{sub 8}O{sub 16} as an electrocatalyst and a cathode

Density functional theory (DFT) calculations are carried out to investigate the electronic, magnetic and thermoelectric properties of bulk and nanosheet K{sub 1.33}Mn{sub 8}O{sub 16} materials. The catalytic activity and cathodic performance of bulk and nanosheet structures are examined using the Tran-Blaha modified Becke-Johnson (TB-mBJ) exchange potential. Electronic structure calculations reveal an anti-ferromagnetic ground state, with a TB-mMBJ band gap in bulk K{sub 1.33}Mn{sub 8}O{sub 16} that is in agreement with experimental results. Density of state plots indicate a partial reduction of Mn{sup 4+} ions to Mn{sup 3+}, without any obvious sign of Jahn-Teller distortion. Moreover, use of the O p-band center as a descriptor of catalytic activity suggests that the nanosheet has enhanced catalytic activity compared to the bulk structure. Thermoelectric parameters such as the Seebeck coefficient, electrical conductivity, and thermal conductivity are also calculated, and it is found that the Seebeck coefficients decrease with increasing temperature. High Seebeck coefficients for both spin-up and spin-down states are found in the nanosheet relative to their value in the bulk K{sub 1.33}Mn{sub 8}O{sub 16} structure, whereas the electrical and thermal conductivity are reduced relative to the bulk. In addition, figures of merit values are calculated as a function of the chemical potential and it is found that the nanosheet has a figure of merit of ~1 at room temperature, compared to 0.5 for the bulk material. All results suggest that K{sub 1.33}Mn{sub 8}O{sub 16} nanosheets can be used both as a material in waste heat recovery and as an electrocatalyst in fuel cells and batteries. - Graphical abstract: K{sub 1.33}Mn{sub 8}O{sub 16}: bulk and nanosheet. - Highlights: • Electronic properties of bulk and nanosheet forms of K{sub 1.33}Mn{sub 8}O{sub 16} have been studied. • The K{sub 1.33}Mn{sub 8}O{sub 16} nanosheet is a semiconductor while the bulk is a metal. • K{sub 1.33}Mn{sub 8}O{sub 16} Nanosheet is a more efficient electrocatalyst than bulk K{sub 1.33}Mn{sub 8}O{sub 16}. • High figure of merit of K{sub 1.33}Mn{sub 8}O{sub 16} nanosheet makes it an efficient cathode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Internal quantum efficiency of III-nitride quantum dot superlattices grown by plasma-assisted molecular-beam epitaxy

We present a study of the optical properties of GaN/AlN and InGaN/GaN quantum dot (QD) superlattices grown via plasma-assisted molecular-beam epitaxy, as compared to their quantum well (QW) counterparts. The three-dimensional/two-dimensional nature of the structures has been verified using atomic force microscopy and transmission electron microscopy. The QD superlattices present higher internal quantum efficiency as compared to the respective QWs as a result of the three-dimensional carrier localization in the islands. In the QW samples, photoluminescence (PL) measurements point out a certain degree of carrier localization due to structural defects or thickness fluctuations, which is more pronounced in InGaN/GaN QWs due to alloy inhomogeneity. In the case of the QD stacks, carrier localization on potential fluctuations with a spatial extension smaller than the QD size is observed only for the InGaN QD-sample with the highest In content (peak emission around 2.76 eV). These results confirm the efficiency of the QD three-dimensional confinement in circumventing the potential fluctuations related to structural defects or alloy inhomogeneity. PL excitation measurements demonstrate efficient carrier transfer from the wetting layer to the QDs in the GaN/AlN system, even for low QD densities ({approx}10{sup 10} cm{sup -3}). In the case of InGaN/GaN QDs, transport losses in the GaN barriers cannot be discarded, but an upper limit to these losses of 15% is deduced from PL measurements as a function of the excitation wavelength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A complex approach to assessing porous structure of structured ceramics obtained by SPS technique

Highlights: • A complex approach to microstructural analysis of nanostructured SPS ceramics was presented. • A bunch of gas, intrusion and microscopic methods were applied for open/closed porosity determination in nanoceramics. • Kinetic TPR analysis for structural changes in nanoceramic was carried out. • 3D pore visualization for nanoceramics was provided via SEM/FIB tomography • Porosity calculations were performed via BET, BJH, t-plot, Washburn equation, FEI Avizo 9.1 software results. - Abstract: Spark plasma sintering (SPS) is a highly prospective technology providing rapid consolidation of nano-disperse compositions into structured ceramics with complex structural organization. Characterizing pore structure of such systems remains a challenge due to different types, size and shape of the pores as well as structural defects occurring in the material, thus requiring special methods to quantify certain porosity type. The paper presents a complex approach to studying structure of SPS hematite-based structured ceramics. The method involves a number of gas, intrusion and electron microscopy probing techniques to characterize open and closed pores in the ceramics bulk. Low temperature nitrogen sorption has been implemented to estimate open micro- and mesoporosity in the size range 0.7–50 nm using BET, BJH and t-plot methods to process experimental data. Additionally, structural peculiarities of consolidated structured ceramics have been studied using temperature-programmed reduction (TPR) with the kinetic analysis of the results being carried out. Volume of macropores sized above 50 nm has been measured with mercury intrusion. Closed pores and structural defects have been quantified with SEM and FIB/SEM tomography. By comparing experimental and estimated results we have shown that addressing all porosity types provides a highly precise structural characterization of the material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Watching Excited State Dynamics with Optical and X-ray Probes: The Excited State Dynamics of Aquocobalamin and Hydroxocobalamin

Femtosecond time-resolved X-ray absorption (XANES) at the Co K-edge, X-ray emission (XES) in the Co Kβ and valence-to-core regions, and broadband UV–vis transient absorption are combined to probe the femtosecond to picosecond sequential atomic and electronic dynamics following photoexcitation of two vitamin B12 compounds, hydroxocobalamin and aquocobalamin. Polarized XANES difference spectra allow identification of sequential structural evolution involving first the equatorial and then the axial ligands, with the latter showing rapid coherent bond elongation to the outer turning point of the excited state potential followed by recoil to a relaxed excited state structure. Time-resolved XES, especially in the valence-to-core region, along with polarized optical transient absorption suggests that the recoil results in the formation of a metal-centered excited state with a lifetime of 2–5 ps. In conclusion, this combination of methods provides a uniquely powerful tool to probe the electronic and structural dynamics of photoactive transition-metal complexes and will be applicable to a wide variety of systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and orientation effects on electronic energy transfer between silicon quantum dots with dopants and with silver adsorbates

Starting from the atomic structure of silicon quantum dots (QDs), and utilizing ab initio electronic structure calculations within the Förster resonance energy transfer (FRET) treatment, a model has been developed to characterize electronic excitation energy transfer between QDs. Electronic energy transfer rates, K{sub EET}, between selected identical pairs of crystalline silicon quantum dots systems, either bare, doped with Al or P, or adsorbed with Ag and Ag{sub 3}, have been calculated and analyzed to extend previous work on light absorption by QDs. The effects of their size and relative orientation on energy transfer rates for each system have also been considered. Using time-dependent density functional theory and the hybrid functional HSE06, the FRET treatment was employed to model electronic energy transfer rates within the dipole-dipole interaction approximation. Calculations with adsorbed Ag show that: (a) addition of Ag increases rates up to 100 times, (b) addition of Ag{sub 3} increases rates up to 1000 times, (c) collinear alignment of permanent dipoles increases transfer rates by an order of magnitude compared to parallel orientation, and (d) smaller QD-size increases transfer due to greater electronic orbitals overlap. Calculations with dopants show that: (a) p-type and n-type dopants enhance energy transfer up to two orders of magnitude, (b) surface-doping with P and center-doping with Al show the greatest rates, and (c) K{sub EET} is largest for collinear permanent dipoles when the dopant is on the outer surface and for parallel permanent dipoles when the dopant is inside the QD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density of Electronic States in the Conduction Band of Ultrathin Films of Naphthalenedicarboxylic Anhydride and Naphthalenetetracarboxylic Dianhydride on the Surface of Oxidized Silicon

The results of examination of the electronic structure of the conduction band of naphthalenedicarboxylic anhydride (NDCA) films in the process of their deposition on the surface of oxidized silicon are presented. These results were obtained using total current spectroscopy (TCS) in the energy range from 5 to 20 eV above the Fermi level. The energy position of the primary maxima of the density of unoccupied states (DOUS) of an NDCA film was determined based on the experimental TCS data and calculated data and compared with the position of the DOUS maxima of a naphthalenetetracarboxylic dianhydride (NTCDA) film. The theoretical analysis involved calculating the energies and the spatial distribution of orbitals of the molecules under study at the B3LYP/6-31G(d) DFT (density functional theory) level and correcting the obtained energies in accordance with the procedure that was proven effective in earlier studies of the conduction band of films of small conjugated organic molecules. It was found that the DOUS maxima of the NTCDA film in the studied energy interval from 5 to 20 eV above the Fermi level are shifted toward lower electron energies by 1–2 eV relative to the corresponding DOUS maxima of the NDCA film Subdivision of the Ufa Federal Research Centre of the.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron-ion dynamics in laser-assisted desorption of hydrogen atoms from H-Si(111) surface

In the framework of real time real space time-dependent density functional theory we have studied the electron-ion dynamics of a hydrogen-terminated silicon surface H-Si(111) subjected to intense laser irradiation. Two surface fragments of different sizes have been used in the simulations. When the intensity and duration of the laser exceed certain levels (which depend on the wavelength) we observe the desorption of the hydrogen atoms, while the underlying silicon layer remains essentially undamaged. Upon further increase of the laser intensity, the chemical bonds between silicon atoms break as well. The results of the simulations suggest that with an appropriate choice of laser parameters it should be possible to remove the hydrogen layer from the H-Si(111) surface in a matter of a few tens of femtoseconds. We have also observed that at high laser field intensities (2-4 V/A in this work) the desorption occurs even when the laser frequency is smaller than the optical gap of the silicon surface fragments. Therefore, nonlinear phenomena must play an essential role in such desorption processes.

36 MATERIALS SCIENCE↗

Effect of Pressure on the Electronic, Magnetic, and Optical Properties of the In{sub 0.75}Cr{sub 0.25}P Compound

Using the density functional theory (DFT) approach and full-potential linearized augmented plane waves (FP-LAPW) method, some of the electronic (density of states, band structure, and Fermi surfaces), magnetic (total and local magnetic moments, spin polarization, exchange constants), and optical properties (dielectric function, energy loss function, and refractive index) were investigated. The GGA + U approximation was used for the exchange-correlation term. The effect of hydrostatic pressure up to 20 GP has been studied on these properties. The results show that the In{sub 0.75}Cr{sub 0.25}P compound is a half metal with 100% spin polarization at the Fermi level and the increment of pressure does not change its half-metallic behavior. The half-metal gap achieved for this compound is variable between 1.38 and 1.5 eV. The interaction between Cr and P atoms in this compound is an anti-ferromagnetic type. It was observed that the total magnetic moment for this compound is about 3 μ{sub B}. Local magnetic moments change with increasing pressure, but the total magnetic moment remains unaffected by increasing the pressure. Calculations of the optical properties of the In{sub 0.75}Cr{sub 0.25}P compound showed that the dominant mechanism for the low-energy photons is due to the induced free carriers of the Cr atom, and the optical properties of this compound, in particular the refractive index in the visible region, change with increasing pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Features of the selective manganese doping of GaAs structures

The effect of technological parameters on the selective manganese doping of arsenide–gallium heterostructures fabricated by a combination of methods of MOS-hydride epitaxy and pulsed-laser deposition is investigated. As these parameters, the impurity content in the manganese δ layer and the structureformation temperature are used. It is established that the prepared structures demonstrate the highest electrical activity and have ferromagnetic properties at a growth temperature of ~400°C and an impurity content of no higher than 0.2–0.3 monolayers. Studying the grown structures by the methods of reflection spectroscopy, high-resolution transmission electron microscopy, and secondary-ion mass spectrometry shows that use of the above conditions in the case of pulsed laser deposition makes it possible to obtain arsenide–gallium structures, which have good crystalline quality, and manganese is concentrated in them within a thin (7–8 nm) layer without substantial diffusion-induced spreading and segregation.

36 MATERIALS SCIENCE↗

Impact of the coordination of multiple Lewis acid functions on the electronic structure and v n configuration of a metal center

Here, the covalent bond classification (CBC) method represents a molecule as ML l X x Z z by evaluating the total number of L, X and Z functions interacting with M. The CBC method is a simplistic approach that is based on the notion that the bonding of a ligating atom (or group of atoms) can be expressed in terms of the number of electrons it contributes to a 2-electron bond. In many cases, the bonding in a molecule of interest can be described in terms of a 2-center 2-electron bonding model and the ML l X x Z z classification can be derived straightforwardly by considering each ligand independently. However, the bonding within a molecule cannot always be described satisfactorily by using a 2-center 2-electron model and, in such situations, the ML l X x Z z classification requires a more detailed consideration than one in which each ligand is treated in an independent manner. The purpose of this article is to provide examples of how the ML l X x Z z classification is obtained in the presence of multicenter bonding interactions. Specific emphasis is given to the treatment of multiple π-acceptor ligands and the impact on the v n configuration, i.e. the number of formally nonbonding electrons on an element of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗