Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Fabrication of Tunnel Junctions For Direct Detector Arrays With Single-Electron Transistor Readout Using Electron-Beam Lithography

This paper will describe the fabrication of small aluminum tunnel junctions for applications in astronomy. Antenna-coupled superconducting tunnel junctions with integrated single-electron transistor readout have the potential for photon-counting sensitivity at sub-millimeter wavelengths. The junctions for the detector and single-electron transistor can be made with electron-beam lithography and a standard self-aligned double-angle deposition process. However, high yield and uniformity of the junctions is required for large-format detector arrays. This paper will describe how measurement and modification of the sensitivity ratio in the resist bilayer was used to greatly improve the reliability of forming devices with uniform, sub-micron size, low-leakage junctions.

Stevenson, T. R.↗

Evolution of the Electron Yield Curves of Insulators as a Function of Impinging Electron Fluence and Energy

Electron emission and concomitant change accumulation near the surface of insulators in central to understanding spacecraft charging. We present a study of changes in electron emission yields as a result of internal charge build up due to electron dose. Evolution of total, backscattered and secondary yield results over a broad range of incident energies are presented for two representative insulators, Kapton(trademark) and Al2O3. Reliable yield curves for uncharged insulators are measured and quantifiable changes in yield are observed due to < 100 fC/sq mm fluences. We find excellent agreement with a phenomenological argument based on insulator charging predicted by the yield curve; this includes a decrease in the rate of change of the yield as incident energies approach the crossover energies and as accumulated internal charge reduces the landing energy to asymptotically approach a steady state surface charge and unity yield. We also find that the exponential decay of yield curves with fluence exhibit an energy dependent decay constant, alpha(E). Finally, we discuss physics based models for this energy dependence. To understand fluence and energy dependence of these charging processes requires knowledge of how charge is deposited within the insulator, the mechanisms for charge trapping and transport within the insulator, and how the profile of trapped charge affects the transport and emission of charges from insulators.

Sim, Alec↗

Electron Attachment to Molecules at Low Electron Energies

One of the most efficient ways of producing negative ions is by the process of dissociative electron attachment to molecules. Here, a diatomic or polyatomic molecule dissociates, by the impact of a low energy electron, into component atoms (or smaller molecular species) while the incident electron attaches itself to one of the dissociating fragments.

Fadeev Equation↗

The NASA Electronic Parts and Packaging (NEPP) Program: Insertion of New Electronics Technologies

This viewgraph presentation gives an overview of NASA Electronic Parts and Packaging (NEPP) Program's new electronics technology trends. The topics include: 1) The Changing World of Radiation Testing of Memories; 2) Even Application-Specific Tests are Costly!; 3) Hypothetical New Technology Part Qualification Cost; 4) Where we are; 5) Approaching FPGAs as a More Than a "Part" for Reliability; 6) FPGAs Beget Novel Radiation Test Setups; 7) Understanding the Complex Radiation Data; 8) Tracking Packaging Complexity and Reliability for FPGAs; 9) Devices Supporting the FPGA Need to be Considered; 10) Summary of the New Electronic Technologies and Insertion into Flight Programs Workshop; and 11) Highlights of Panel Notes and Comments

LaBel, Kenneth A.↗

Interface Electronic Circuitry for an Electronic Tongue

Electronic circuitry has been developed to serve as an interface between an electronic tongue and digital input/output boards in a laptop computer that is used to control the tongue and process its readings. Electronic tongues can be used for a variety of purposes, including evaluating water quality, analyzing biochemicals, analyzing biofilms, and measuring electrical conductivities of soils.

Keymeulen, Didier↗

Lead-Free Electronics: Impact for Space Electronics

Pb is used as a constituent in solder alloys used to connect and attach electronic parts to printed wiring boards (PWBs). Similar Pbbearing alloys are electroplated or hot dipped onto the terminations of electronic parts to protect the terminations and make them solderable. Changing to Pb-free solders and termination finishes has introduced significant technical challenges into the supply chain. Tin/lead (Sn/Pb) alloys have been the solders of choice for electronics for more than 50 years. Pb-free solder alloys are available but there is not a plug-in replacement for 60/40 or 63/37 (Sn/Pb) alloys, which have been the industry workhorses.

Sampson, Michael J.↗

Lunary Dust Grain Charging by Electron Impact: Complex Role of Secondary Electron Emissions in Space Environments

Dust grains in various astrophysical environments are generally charged electrostatically by photoelectric emissions with radiation from nearby sources, or by electron/ion collisions by sticking or secondary electron emissions (SEES). The high vacuum environment on the lunar surface leads to some unusual physical and dynamical phenomena involving dust grains with high adhesive characteristics, and levitation and transportation over long distances. Knowledge of the dust grain charges and equilibrium potentials is important for understanding a variety of physical and dynamical processes in the interstellar medium, and heliospheric, interplanetary/ planetary, and lunar environments. It has been well recognized that the charging properties of individual micron-/submicron-size dust grains are expected to be substantially different from the corresponding values for bulk materials. In this paper, we present experimental results on the charging of individual 0.2-13 m size dust grains selected from Apollo 11 and 17 dust samples, and spherical silica particles by exposing them to mono-energetic electron beams in the 10-200 eV energy range. The dust charging process by electron impact involving the SEES discussed is found to be a complex charging phenomenon with strong particle size dependence. The measurements indicate substantial differences between the polarity and magnitude of the dust charging rates of individual small-size dust grains, and the measurements and model properties of corresponding bulk materials. A more comprehensive plan of measurements of the charging properties of individual dust grains for developing a database for realistic models of dust charging in astrophysical and lunar environments is in progress.

Abbas, M. M.↗

Metallographic Preparation of Space Shuttle Reaction Control System Thruster Electron Beam Welds for Electron Backscatter Diffraction

A Space Shuttle Reaction Control System (RCS) thruster failed during a firing test at the NASA White Sands Test Facility (WSTF), Las Cruces, New Mexico. The firing test was being conducted to investigate a previous electrical malfunction. A number of cracks were found associated with the fuel closure plate/injector assembly (Fig 1). The firing test failure generated a flight constraint to the launch of STS-133. A team comprised of several NASA centers and other research institutes was assembled to investigate and determine the root cause of the failure. The JSC Materials Evaluation Laboratory was asked to compare and characterize the outboard circumferential electron beam (EB) weld between the fuel closure plate (Titanium 6Al-4V) and the injector (Niobium C-103 alloy) of four different RCS thrusters, including the failed RCS thruster. Several metallographic challenges in grinding/polishing, and particularly in etching were encountered because of the differences in hardness, ductility, and chemical resistance between the two alloys and the bimetallic weld. Segments from each thruster were sectioned from the outboard weld. The segments were hot-compression mounted using a conductive, carbon-filled epoxy. A grinding/polishing procedure for titanium alloys was used [1]. This procedure worked well on the titanium; but a thin, disturbed layer was visible on the niobium surface by means of polarized light. Once polished, each sample was micrographed using bright field, differential interference contrast optical microscopy, and scanning electron microscopy (SEM) using a backscatter electron (BSE) detector. No typical weld anomalies were observed in any of the cross sections. However, areas of large atomic contrast were clearly visible in the weld nugget, particularly along fusion line interfaces between the titanium and the niobium. This prompted the need to better understand the chemistry and microstructure of the weld (Fig 2). Energy Dispersive X-Ray Spectroscopy (EDS) was used to confirm the chemical composition of the variations in contrast in these areas. Niobium alloys generally require exposure to more aggressive chemical reagents than titanium alloys for etching because of niobium s chemical resistance; therefore, the titanium portion of the sample was etched first. A five second immersion in Kroll s reagent revealed a general microstructure on the titanium portion of the sample; however, the titanium heat affected zone closest to the weld, was over-etched due to higher concentrations of refined grains and an increase in eta-phase. The Kroll s etchant also revealed some microstructure in the weld nugget itself; the niobium portion of the sample remained unetched.

Martinez, James↗

MEASUREMENT OF THE CHARGED-CURRENT INCLUSIVE ELECTRON NEUTRINO AND ELECTRON ANTINEUTRINO CROSS SECTION USING THE MICROBOONE DETECTOR IN THE NUMI BEAM

Detection of electron neutrino appearance is the process by which modern neutrino experiments seek to answer the open questions in neutrino physics: CP-violation in the neutrino sector, the neutrino mass ordering, and sterile neutrino oscillations. To date, only three measurements of electron neutrino cross sections have been performed. The analysis presented in this thesis describes the extraction of the first charged-current inclusive $\nu_e$ + $\bar{\nu}_e$ cross section on argon. This calculation was performed with data collected by the MicroBooNE liquid argon time projection chamber using neutrinos from the Neutrino Main Injector (NuMI) beam located at the Fermi National Accelerator Laboratory. Extraction of this cross section is enabled by the first fully-automated inclusive selection of $\nu_e$ + $\bar{\nu}_e$ charged-current interactions in a liquid argon time projection chamber, which provided the largest sample of $\nu_e$ + $\bar{\nu}_e$ charged-current interactions ever observed in liquid argon. The selection utilises the signature capabilities of liquid argon, such as distinguishing electron-like and photon-like electromagnetic showers using their charge-deposition profiles (dE/dx). The evaluation of systematic effects influencing the final cross section, including detector simulation and flux simulation uncertainties, which have been applied for the first time to a MicroBooNE analysis using neutrinos from the NuMI beam, is also presented. The total impact of all systematic and statistical effects results in a 38.44\% uncertainty on the flux integrated cross section, giving $\sigma_{\nu_{e}~+~\bar{\nu}_e} = 4.67 \pm 1.01 \textrm{(stat)} \pm 1.48 \textrm{(sys)} \times 10^{-39}$ cm$^{2}$ per nucleon as the final result, which is in agreement with theoretical predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Establishing Relationships Between the Geometric Structure and Chemical Reactivity of Alloy Catalysts Based on Their Measured Electronic Structure

While it is fairly straightforward to predict the relative chemical reactivity of pure metals, obtaining similar structure-performance relationships for alloys is more challenging. In this contribution we present experimental analysis supported with quantum chemical DFT calculations which allowed us to propose a simple, physically transparent model to predict the impact of alloying on the local electronic structure of different sites in alloys and on the local chemical reactivity. The model was developed through studies of a number of Pt alloys. The central feature of the model is that hybridization of d-orbitals in alloys does not lead to significant charge transfer between the constituent elements in the alloy, and therefore the width of the local density of d-states projected on a site, which is easily calculated from tabulated parameters, is an excellent descriptor of the chemical reactivity of the site.

36 MATERIALS SCIENCE↗

Electron Attachment and Electron Ionization of Formic Acid Clusters Embedded in Helium Nanodroplets

We report the results of an experimental study of electron ionization of large helium nanodroplets doped with formic acid (FA). Several homologous series of cluster anions are observed, including [FA{sub n}-H]{sup −}, undissociated FA{sub n}{sup −}, and these ions complexed with one or more H{sub 2}O. Some major features resemble those observed upon sputtering of frozen FA films but they differ significantly from results obtained by electron attachment to bare FA clusters in the gas phase. The FA{sub n}{sup −} and (H{sub 2}O)[FA{sub n}-H]{sup −} series show abrupt onsets above n = 2 and 5, respectively. A prominent resonance in the anion yield occurs at 22.5 eV due to the formation of an intermediate He{sup −*}. Also observed are homologous series of [FA-H]{sup −} or [FA{sub 2}-H]{sup −} complexed with helium. The cation chemistry is dominated by the production of protonated formic acid clusters, [FA{sub n}H]{sup +}, but various other homologous cluster ion series are observed as well. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Analysis of passivated A-286 stainless steel surfaces for mass spectrometer inlet systems by Auger electron and X-ray photoelectron spectroscopy and scanning electron microscopy

In this study, various commercially available surface treatments are being explored for use on stainless steel components in mass spectrometer inlet systems. Type A-286 stainless steel coupons, approximately 12.5 mm in diameter and 3 mm thick, were passivated with one of five different surface treatments; an untreated coupon served as a control. The surface and near-surface microstructure and chemistry of the coupons were investigated using sputter depth profiling using Auger electron spectroscopy, x-ray photoelectron spectroscopy, and scanning electron microscopy (SEM). All the surface treatments studied appeared to change the surface morphology dramatically, as evidenced by lack of tool marks on the treated samples in SEM images. In terms of the passivation treatment, Vendors A-D appeared to have oxide layers that were very similar in thickness to each other (0.7–0.9 nm thick), as well as to the untreated samples (the untreated sample oxide layers appeared to be somewhat larger). Vendor E’s silicon coating appears to be on the order of 200 nm thick.

36 MATERIALS SCIENCE↗

In situ transmission electron microscopy of electron-beam induced damage process in nuclear grade graphite

Atomic level processes involved in the swelling and crack-closing in nuclear grade graphite under electron irradiation have been observed in real-time using transmission electron microscopy. Noise-filtered lattice images show the formation of vacancy loops, interstitial loops and resulting dislocations with unprecedented clarity. The dislocation dipoles formed via vacancy loops were found to undergo climb resulting in extra basal planes. Concurrent EELS studies showed a reduction in the atomic density because of the breakage of hexagonal carbon rings. The formation of new basal planes via dislocation climb in addition to the bending/breaking of basal planes leads to swelling and closing of micro-cracks.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Thermal and electronic charge transport in bulk nanostructured Zr{sub 0.25}Hf{sub 0.75}NiSn composites with full-Heusler inclusions

Bulk Zr{sub 0.25}Hf{sub 075}NiSn half-Heusler (HH) nanocomposites containing various mole fractions of full-Heusler (FH) inclusions were prepared by solid state reaction of pre-synthesized HH alloy with elemental Ni at 1073 K. The microstructures of spark plasma sintered specimens of the HH/FH nanocomposites were investigated using transmission electron microscopy and their thermoelectric properties were measured from 300 K to 775 K. The formation of coherent FH inclusions into the HH matrix arises from solid-state Ni diffusion into vacant sites of the HH structure. HH(1-y)/FH(y) composites with mole fraction of FH inclusions below the percolation threshold, y{approx}0.2, show increased electrical conductivity, reduced Seebeck coefficient and increased total thermal conductivity arising from gradual increase in the carrier concentration for composites. A drastic reduction ({approx}55%) in {kappa}{sub l} was observed for the composite with y=0.6 and is attributed to enhanced phonon scattering due to mass fluctuations between FH and HH, and high density of HH/FH interfaces. - Graphical abstract: Large reduction in the lattice thermal conductivity of bulk nanostructured half-Heusler/full-Heusler (Zr{sub 0.25}Hf{sub 075}NiSn/ Zr{sub 0.25}Hf{sub 075}Ni{sub 2}Sn) composites, obtained by solid-state diffusion at 1073 K of elemental Ni into vacant sites of the half-Heusler structure, arising from the formation of regions of spinodally decomposed HH and FH phases with a spatial composition modulation of {approx}2 nm. Highlights: > Bulk composites from solid state transformation of half-Heusler matrix through Ni diffusion. > Formation of coherent phase boundaries between half-Heusler matrix and full-Heusler inclusion. > Alteration of thermal and electronic transports with increasing full-Heusler inclusion. > Enhanced phonon scattering at half-Heusler/ full-Heusler phase boundaries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron diffraction and high-resolution electron microscopy studies on layered Li{sub 2−δ}(Mn{sub 1−x}Co{sub x}){sub 1+δ}O{sub 3}

The structure of Li{sub 2}MnO{sub 3}–LiCoO{sub 2} solid solutions or Li{sub 2−δ}(Mn{sub 1−x}Co{sub x}){sub 1+δ}O{sub 3} (LMCO) which are promising lithium-battery cathodes was studied by high-resolution electron microscopy (HREM). X-ray diffraction (XRD) analyses indicate that Li{sub 1.6}Mn{sub 0.2}Co{sub 1.2}O{sub 3} and Li{sub 1.7}Mn{sub 0.4}Co{sub 0.9}O{sub 3} take a rhombohedral (R3-bar m space group) structure, whereas Li{sub 1.85}Mn{sub 0.7}Co{sub 0.45}O{sub 3} and Li{sub 1.95}Mn{sub 0.9}Co{sub 0.15}O{sub 3} take a monoclinic (C2/m) superstructure. HREM studies on those samples reveal that all of the observed crystallites in sample Li{sub 1.95}Mn{sub 0.9}Co{sub 0.15}O{sub 3} contain sharp stripe structures due to the planar defects along the c{sub h}-axis (stacking direction of the hexagonal close-packed planes) of parent rhombohedral R3-bar m cell. Such stripe structures become faint with increasing x, Co content. The origin of the planar defects is mainly attributed not to the different structures but to the different local orientations of the monoclinic LMCO. Local disordering of Li and (Mn,Co) in (Li,Mn,Co) planes is developed with increasing x and the structures are transformed from C2/m to R3-bar m. The alternative (Li,Mn,Co)-plane stacking structure, trigonal P3{sub 1}12 LMCO, was occasionally observed. However, only P3{sub 1}12 LMCO platelets with a thickness of a single unit cell were detected. - Graphical abstract: An HREM image for Li{sub 1.95}(Mn{sub 0.9}Co{sub 0.15})O{sub 3} and schematic drawings of C2/m and P3{sub 1}12 Li{sub 2}MnO{sub 3} projected along the various zone axes. Each projected unit cell is indicated by rectangles and parallelograms . - Highlights: • Li{sub 2−δ}(Mn{sub 1−x}Co{sub x}){sub 1+δ}O{sub 3} was studied by high-resolution electron microscopy (HREM). • HREM studies revealed a large amount of planar defects in C2/m Li{sub 1.95}Mn{sub 0.9}Co{sub 0.15}O{sub 3}. • The origin of the defects is the different local orientations of the C2/m platelets. • P3{sub 1}12 platelets with only single unit cell sequence were detected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural development of electron beam processed Al-3Ti-1Sc alloy under different electron beam scanning speeds

A systematic study has been made of the microstructural development in as-cast 30 mm thick Al-3Ti-1Sc (wt%) plate samples that were processed by electron beam (EB) melting at different scanning speeds of 3, 5, 8, 12, 15 and 20 mm/s. The composition of the alloy is designed to capitalize on the potential for significantly extended solubility values of both Sc and Ti in Al when cooled at high cooling rates. The resulting microstructures are characterised using transmission electron microscopy (TEM) and other analytical means, assisted with Thermo-Calc predictions and Vicker's microhardness measurements. EB scanning speed plays a key role in determining the phase formation and microstructural development in the Al-3Ti-1Sc alloy when the beam is applied an accelerating voltage of 50 kV and a current of 30 μA. The major microstructural features in the re-solidified zone include (i) the formation of the primary tetragonal Al{sub 3}(Ti,Sc) phases and their retention or subsequent transformation to stable cubic Al{sub 3}(Ti,Sc) phases; (ii) the complete suppression of the primary tetragonal Al{sub 3}(Ti,Sc) phases at the scanning speed of 20 mm/s; and (iii) the formation of cubic Al{sub 3}(Ti,Sc) precipitates in the α(Al) matrix supersaturated with both Sc and Ti. These experimental findings are informative for both EB processing of Al-Ti-Sc alloys and the design of new Al alloys for additive manufacturing processes.

36 MATERIALS SCIENCE↗

Free electron lasers: Present status and future challenges

With the scientific successes of the soft X-ray FLASH facility in Germany and the recent spectacular commissioning of the Linac Coherent Light Source at SLAC, free electron lasers are poised to take center stage as the premier source of tunable, intense, coherent photons of either ultra-short time resolution or ultra-fine spectral resolution, from the far infrared to the hard X-ray regime. This paper examines the state of the art in FEL performance and the underlying enabling technologies. It evaluates the state of readiness of the three basic machine architectures—SASE FELs, seeded FELs, and FEL oscillators—for the major X-ray science user facilities on the 5–10 years time scale and examines the challenges that lie ahead for FELs to achieve their full potential throughout the entire spectral range. In soft and hard X-rays, high longitudinal coherence, in addition to full transverse coherence, will be the key performance upgrade; ideas using laser-based or self-seeding or oscillators can be expected to be qualitatively superior to today&#x27;s SASE sources. Short pulses, from femtoseconds to attoseconds, can be realistically envisioned. With high repetition rate electron sources coupled to superconducting radiofrequency linear accelerators, unprecedented average beam brightness will be possible and many users would be served simultaneously by a single accelerator complex.

43 PARTICLE ACCELERATORS↗

Transmission Electron Microscopy and Electron Energy-Loss Spectroscopy Studies of Hole-Selective Molybdenum Oxide Contacts in Silicon Solar Cells

In this study, substochiometric hole-selective molybdenum oxide (MoO x ) contacts in crystalline silicon (c-Si) solar cells were investigated by a combination of transmission electron microscopy (TEM) and spatially resolved electron energy-loss spectroscopy (SR-EELS). It was observed that a ≈ 4 nm SiO x interlayer grows at the MoO x /c-Si interface during the evaporation of MoO x over a c-Si substrate. SR-EELS analyses revealed the presence of a 1.5 nm diffused MoO x /indium tin oxide (ITO) interface in both as-deposited and annealed samples. Moreover, the presence of a 1 nm thin layer with a lower oxidation state of Mo was detected at the SiO x /MoO x interface in an as-deposited state, which disappears upon annealing. Altogether, it was evident that no hole-blocking interlayer is formed at the MoO x /ITO interface during annealing and homogenization of the MoO x layer takes place during the annealing process. Furthermore, device simulations revealed that efficient hole collection is dependent on MoO x work function and that reduction in the work function of MoO x results in loss of band bending and negatively impacts hole selectivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗