Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “digital computers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The Trustworthy Digital Camera: Restoring Credibility to the Photographic Image

The increasing sophistication of computers has made digital manipulation of photographic images incredibly easy to perform and, as time goes on, increasingly difficult to detect. The proposed device is a new type of digital camera whose output can be certified as being unretouched, and can restore the credibility that the photographic image once enjoyed. The Trustworthy Digital Camera employs public key encryption techniques at the system level, and produces an encrypted digital signature and a standard-format digital image file each time a picture is taken. Although digitally retouching or altering these image files would still be possible, doing so will cause a mismatch with the verifying signature, proving that the image is not an untouched original...

Friedman, Gary L.↗
NASA NTRS1979

Satellite-aided evaluation of population exposure to air pollution

The evaluation of population exposure to air pollution through the computer processing of Landsat digital land use data, along with total suspended particulate estimates and population data by census tracts, is demonstrated. Digital image processing was employed to analyze simultaneously data from Landsat MSS bands 4 through 7 in order to extract land use and land cover information. The three data sets were spatially registered in a digital format, compatible with integrated computer processing, and cross-tabulated. A map illustrating relative air quality by 2-sq km cells for the residential population in the Portland, Oregon area is obtained.

Todd, W. J.↗
NASA NTRS2007

Enhanced Master Controller Unit Tester

The Enhanced Master Controller Unit Tester (EMUT) software is a tool for development and testing of software for a master controller (MC) flight computer. The primary function of the EMUT software is to simulate interfaces between the MC computer and external analog and digital circuitry (including other computers) in a rack of equipment to be used in scientific experiments. The simulations span the range of nominal, off-nominal, and erroneous operational conditions, enabling the testing of MC software before all the equipment becomes available.

Benson, Patricia↗
NASA NTRS1971

Computerized methods for trafficability analysis

Computer program produces trafficability maps displaying terrain characteristics in digital form for computer analysis. Maps serve as aid to vehicular operation and highway planning based on maneuverability parameters.

Lewandowski, G. M.↗
NASA NTRS1965

Digital Distributed Parameter Model for Analysis of Unsteady Flow in Liquid-Filled Lines

A distributed parameter model for computing unsteady flow conditions in liquid systems is presented. The model is adapted for use in conjunction with a digital computer. The analytical method employed is essentially a solution synthesized from the effects of incremental step pressure pulses. The pressure pulses are generated because of incremental flow-rate changes that originate in a fluid system from a variety of sources, including the mechanical motion of the system structure. The pressure pulses propagate throughout the system at sonic velocity and are partially transmitted and reflected at each discontinuity. The velocity change caused by each pressure pulse is obtained from the relation for the characteristic acoustic impedance. Pressure and velocity time histories at any point in the system are obtained by a timewise summation of the contributions of the incremental pressure pulses passing that point. The analysis is presented in a form general enough to be applied to a variety of liquid-filled fluid systems. To illustrate the application of the method to a specific system, the response of a long, straight propellant line to a sinusoidal inlet flow and pressure perturbation is computed. Both a constant-cross-section line and a tapered line are analyzed in the example.

UNSTEADY FLOW↗
NASA NTRS1996

Finding New Math Identities by Computer

Recently a number of interesting new mathematical identities have been discovered by means of numerical searches on high performance computers, using some newly discovered algorithms. These include the following: pi = ((sup oo)(sub k=0))(Sigma) (1 / 16) (sup k) ((4 / 8k+1) - (2 / 8k+4) - (1 / 8k+5) - (1 / 8k+6)) and ((17 pi(exp 4)) / 360) = ((sup oo)(sub k=1))(Sigma) (1 + (1/2) + (1/3) + ... + (1/k))(exp 2) k(exp -2), zeta(3, 1, 3, 1, ..., 3, 1) = (2 pi(exp 4m) / (4m+2)! where m = number of (3,1) pairs. and where zeta(n1,n2,...,nr) = (sub k1 (is greater than) k2 (is greater than) ... (is greater than) kr)(Sigma) (1 / (k1 (sup n1) k2 (sup n2) ... kr (sup nr). The first identity is remarkable in that it permits one to compute the n-th binary or hexadecimal digit of pu directly, without computing any of the previous digits, and without using multiple precision arithmetic. Recently the ten billionth hexadecimal digit of pi was computed using this formula. The third identity has connections to quantum field theory. (The first and second of these been formally established; the third is affirmed by numerical evidence only.) The background and results of this work will be described, including an overview of the algorithms and computer techniques used in these studies.

Bailey, David H.↗
NASA NTRS2009

Target-Tracking Camera for a Metrology System

An analog electronic camera that is part of a metrology system measures the varying direction to a light-emitting diode that serves as a bright point target. In the original application for which the camera was developed, the metrological system is used to determine the varying relative positions of radiating elements of an airborne synthetic aperture-radar (SAR) antenna as the airplane flexes during flight; precise knowledge of the relative positions as a function of time is needed for processing SAR readings. It has been common metrology system practice to measure the varying direction to a bright target by use of an electronic camera of the charge-coupled-device or active-pixel-sensor type. A major disadvantage of this practice arises from the necessity of reading out and digitizing the outputs from a large number of pixels and processing the resulting digital values in a computer to determine the centroid of a target: Because of the time taken by the readout, digitization, and computation, the update rate is limited to tens of hertz. In contrast, the analog nature of the present camera makes it possible to achieve an update rate of hundreds of hertz, and no computer is needed to determine the centroid. The camera is based on a position-sensitive detector (PSD), which is a rectangular photodiode with output contacts at opposite ends. PSDs are usually used in triangulation for measuring small distances. PSDs are manufactured in both one- and two-dimensional versions. Because it is very difficult to calibrate two-dimensional PSDs accurately, the focal-plane sensors used in this camera are two orthogonally mounted one-dimensional PSDs.

Liebe, Carl↗
NASA NTRS1972

Speed in Information Processing with a Computer Driven Visual Display in a Real-time Digital Simulation

Information transfer between the operator and computer-generated display systems is an area where the human factors engineer discovers little useful design data relating human performance to system effectiveness. This study utilized a computer-driven, cathode-ray-tube graphic display to quantify human response speed in a sequential information processing task. The performance criteria was response time to sixteen cell elements of a square matrix display. A stimulus signal instruction specified selected cell locations by both row and column identification. An equal probable number code, from one to four, was assigned at random to the sixteen cells of the matrix and correspondingly required one of four, matched keyed-response alternatives. The display format corresponded to a sequence of diagnostic system maintenance events, that enable the operator to verify prime system status, engage backup redundancy for failed subsystem components, and exercise alternate decision-making judgements. The experimental task bypassed the skilled decision-making element and computer processing time, in order to determine a lower bound on the basic response speed for given stimulus/response hardware arrangement.

Kyle, R. G.↗
NASA NTRS1974

A flight investigation of a terminal area navigation and guidance concept for STOL aircraft

A digital avionics system referred to as STOLAND has been test-flown in the NASA CV-340 to obtain performance data for time-controlled guidance in the manual flight director mode. The advanced system components installed in the cockpit included an electronic attitude director indicator and an electronic multifunction display. Navigation guidance and control computations were all performed in the digital computer. Approach paths were flown which included a narrow 180-deg turn and a 1-min, 5-deg straight-in approach to the 30-m altitude go-around point. Results are presented for 20 approaches: (1) blended radio/inertial navigation using TACAN and a microwave scanning beam landing guidance system (MODILS) permitted a smooth transition from area navigation (TACAN) to precision terminal navigation (MODILS), (2) guidance system (flight director) performance measured at an altitude of 30.5 m was within that prescribed for category II CTOL operations on a standard runway, and (3) time of arrival at a point about 2 mi from touchdown was about 4 sec plus or minus sec later than the computed nominal arrival time.

Smith, D. W.↗
DOE OSTI2025

Design, Optimization, and Control of Floating Offshore Wind Farms for Optimal Energy Production (Final report)

The uncertainty and irregularity of ocean waves and the ocean environment is a major factor in the development of commercial scale floating wind turbines as the operation of floating structures in such an environment can lead to irregular and unpredictable loading, fatigue, and ultimately a reduction in the operational life of the turbine system which affects energy production over the lifetime of the turbine. Control solutions that can limit float motions and mitigate stressful events on the structure become essential for extending lifetime and limiting the operational uncertainty of a floating wind turbine. Digital twins are computational replicas of physical systems that operate in parallel with the operation of the physical system. Given advanced knowledge of a systems input, digital twins have the ability to predict the behavior of a system in advance, which can be valuable in the control of that system. In this project, we developed and assessed potential digital twin models developed in house and openly available (OpenFast) for use in the real time control of the six degree of freedom response motions of a floating wind turbine in ocean waves. Coupling these models with near-field real time irregular sea surface (wve) measurement/sensings and prediction models, we used the digital twin to predict how the floating turbine will respond to the incoming waves. Applying this information to a motion control system of the float, one can limit and control float motions to prevent undesirable loading events/large angular motions, thus increasing system life and ultimately contributing to optimizing energy production. Due to the computational intensity of operating a digital twin in real time, we investigated the use of artificial intelligence techniques to speed-up the processes of the digital twin, as well as the wave reconstruction/prediction models. Model tank testing at the University of Rhode Island and University of Maine both validated and demonstrated the developed techniques on simple float geometries and a scale model of the NREL 15 MW reference turbine.

17 WIND ENERGY↗
NASA NTRS1978

Discrimination of rock classes and alteration products in southwestern Saudi Arabia with computer-enhanced LANDSAT data

Digital LANDSAT MSS data for an area in the southwestern Arabian Shield were computer-enhanced to improve discrimination of rock classes, and recognition of gossans associated with massive sulphide deposits. The test area is underlain by metamorphic rocks that are locally intruded by granites; these are partly overlain by sandstones. The test area further includes the Wadi Wassat and Wadi Qatan massive sulphide deposits, which are commonly capped by gossans of ferric oxides, silica, and carbonates. Color patterns and boundaries on contrast-stretched ratio color composite imagery, and on complementary images constructed using principal component and canonical analyses transformations, correspond exceptionally well to 1:100,000 scale field maps. A qualitative visual comparison of information content showed that the ratio enhancement provided the best overall image for identification of rock type and alteration products.

Blodget, H. W.↗
DOE OSTI2017

A review of predictive nonlinear theories for multiscale modeling of heterogeneous materials

Since the beginning of the industrial age, material performance and design have been in the midst of innovation of many disruptive technologies. Today's electronics, space, medical, transportation, and other industries are enriched by development, design and deployment of composite, heterogeneous and multifunctional materials. As a result, materials innovation is now considerably outpaced by other aspects from component design to product cycle. In this article, we review predictive nonlinear theories for multiscale modeling of heterogeneous materials. Deeper attention is given to multiscale modeling in space and to computational homogenization in addressing challenging materials science questions. Moreover, we discuss a state-of-the-art platform in predictive image-based, multiscale modeling with co-designed simulations and experiments that executes on the world's largest supercomputers. Such a modeling framework consists of experimental tools, computational methods, and digital data strategies. Once fully completed, this collaborative and interdisciplinary framework can be the basis of Virtual Materials Testing standards and aids in the development of new material formulations. Moreover, it will decrease the time to market of innovative products.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2025

CFD Validation of a Methanation Reactor With Cooling Jacket Used in an ISRU Propellant Production System

A digital model of an OxEon Energy methanation reactor (with a cooling jacket) planned for use in a NASA designed In-Situ Resource Utilization (ISRU) propellant production system was developed by the UTEP Aerospace Center using STAR-CCM+ software, a Siemens Computational Fluid Dynamics (CFD) package. The reactor digital model created includes two primary components: (i) a cooling jacket that maintains the required reactor chamber surface temperature and (ii) a reactor core chamber where the exothermic methanation reactions occur. The StarCCM+ digital model has two objectives: (i) maintain the surface temperature of the reactor below a set value so that the extra heat accumulation does not melt or crack the chamber, and (ii) produce the desired amount of methane (CH4) according to test cases completed by OxEon Energy for NASA JSC. The computational digital model was validated with the test data enabling the cooling jacket scale to be predicted based on the reactor's operating temperature. The StarCCM+ simulation of the digital model shows a good agreement with the cooling jacket performance and the CH4 production. One test case for the cooling jacket maintained the reactor wall temperature around 310 °C was validated and the reactor produced 185 g/hr CH 4 .

ISRU↗
NASA NTRS1981

Digital image processing on a small computer system

A minicomputer-based image processing facility provides a relatively low-cost entry point for education about image analysis applications in remote sensing. While a minicomputer has sufficient processing power to produce results quite rapidly for low volumes of small images, it does not have sufficient power to perform CPU- or 1/0-bound tasks on large images. A system equipped with a display terminal is ideally suited for interactive tasks. Software procurement is a limiting factor for most end users, and software availability may well be the overriding consideration in selecting a particular hardware configuration. The hardware chosen should be selected to be compatible with the software and with concern for future expansion.

Danielson, R.↗
NASA NTRS1997

Digital Processing of Remotely Sensed Imaging

Digital images can be acquired from various devices. Image scanners on personal computers can generate digital images of hard copy material.

process imagery remote sensing deep space missions↗