Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “charging analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Economic Storage Size Optimization for Electric Vehicle Extreme-Fast Charging Stations

En-route charging infrastructure for electric vehicles is critical to support transportation needs. These charging stations are likely to have high loads and especially sharp peak loads given fast charging capabilities needed to meet transportation schedules. In order to reduce both strain on distribution grid infrastructure and charging station operational costs, many stations are likely to employ behind the meter storage. This paper demonstrates a behind the meter storage sizing optimization that employs an open-source agent-based vehicle behavior model (BEAM) to determine the best sizing across many scenarios. This optimization and analysis is novel in that it examines how storage size impacts not only charging station cost and peak load, but also vehicle queue times. The optimization is also applied across a wide analysis region with sufficient diversity and numbers to provide novel statistical analysis of optimal sizes.

Aka, Julius↗

A charged particle transport approximation for thick and thin plasmas

In this work, we will construct a simple method to be utilized in the interpretation of the properties of a thin plasma from a study of the transport of charged particles through it. We do so by first demonstrating how charged particle fluxes encode local plasma information in their spectra for sufficiently thick plasmas and then propose how to extend that analysis to the thin plasma limit where the extensive geometry cannot be neglected through arguments from scale separation. We provide a numerical treatment of the transport problem and demonstrate that it is in good agreement with the approximation we present. Finally, we utilize both the numerical solution and our novel approximation to study the impact of the extensive scale of the plasma on the yield and flux normalized high-energy neutron spectra resulting from the upscattering of charged fuel ions. Using this analysis, we show that (after controlling for fusion yield) for the same uniform densities and temperatures, larger plasmas have higher magnitude but softer reaction-in-flight (RIF) neutron spectra relative to smaller plasmas. This is because larger plasmas retain more knocked-on suprathermal ions within their bulk and can downscatter them to lower average energies, while smaller plasmas allow a larger fraction of high energy particles to “range out” of the system prior to substantial downscattering or inducing an RIF reaction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Computational study of the electrostatic potential and charges of multivalent ionic liquid molecules

The electrostatic interactions in ionic liquids (ILs) can be difficult to quantify, but this information is very valuable for improving intermolecular potentials for performing molecular-level simulations. Although polarizable forcefields can provide improved accuracy, the computational efficiency of fixed charge molecular models is often preferred for larger systems. Here, we propose a multi-scale screening approach for analyzing the charge scaling behavior and other electrostatic properties of ILs, which is more attainable than previous analysis methods that rely on the IL crystalline structures. Based on isolated molecules and small clusters, we study the electrostatic potential properties and charges of multivalent IL molecules using density-functional theory calculations and ab initio molecular dynamics simulations. The charges of the IL molecules are calculated and compared using several different charge estimation techniques. Although there are some differences among the estimated partial charges on the atoms, the total anion and cation charges are very similar. In conclusion, the charge scaling factors are substantial, and they are only slightly affected by the IL cluster size model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Search for bottom-type vectorlike quark pair production in dileptonic and fully hadronic final states in proton-proton collisions at s = 13 TeV

A search is described for the production of a pair of bottom-type vectorlike quarks ( B VLQs) with mass greater than 1000 GeV. Each B VLQ decays into a b quark and a Higgs boson, a b quark and a Z boson, or a t quark and a W boson. This analysis considers both fully hadronic final states and those containing a charged lepton pair from a Z boson decay. The products of the H → b b boson decay and of the hadronic Z or W boson decays can be resolved as two distinct jets or merged into a single jet, so the final states are classified by the number of reconstructed jets. The analysis uses data corresponding to an integrated luminosity of 138 fb - 1 collected in proton-proton collisions at s = 13 TeV with the CMS detector at the LHC from 2016 to 2018. No excess over the expected background is observed. Lower limits are set on the B VLQ mass at the 95% confidence level. These depend on the B VLQ branching fractions and are 1570 and 1540 GeV for 100% B → b H and 100% B → b Z , respectively. In most cases, the mass limits obtained exceed previous limits by at least 100 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Self-focusing of a Gaussian electromagnetic beam in a complex plasma

This paper analyzes the propagation of a Gaussian electromagnetic beam in a complex plasma; the paraxial approach has been invoked for the study of the propagation characteristics. The analytical model emphasizes the open nature of complex plasmas and incorporates the charge, number density, and energy balance of the plasma constituents along with the plasma neutrality. Diffusion due to the density and temperature gradients, thermal conduction, Ohmic heating, and energy exchange in collisions/accretion have also been taken into account. For a numerical appreciation of the results, the critical curves for the propagation of the beam in dark plasmas have been discussed. The dependence of the beam width parameter on distance of propagation has been evaluated for three typical cases viz., of steady divergence, oscillatory divergence, and self-focusing. The equality of electron and ion density, an assumption inherent in the earlier analysis, has been discarded on account of the presence of charged dust particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Response to Comment on "Geometric Phase of the Gyromotion for Charged Particles in a Time-dependent Magnetic Field"

The reformulation of our analysis on the geometric phase of the gyromotion [J. Liu and H. Qin, Phys. Plasmas 18, 072505 (2011)] in terms of spatial angles presented in the comment by Brizard and Guillebon is interesting and correct. The subtlety of whether the adiabatic term associated with the long term average of the variation of pitch angle completely disappears after the gyrophase average is related to where valid approximations are applied. But it has no impact on the main conclusions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energetic Charged Particle Component or the NO(y) Budget of the Polar Middle Atmosphere

Analysis of nitrates measured in polar ice cap snow at a high resolution shows large variations in the nitrates. It has been shown that the nitrate signal may contain a signature of solar activity [Zeller and Dreschhoff, 19951. Reactive odd nitrogen production associated with solar particle events (SPEs) and auroral activity may be a source of some of the nitrate anomalies observed in the polar ice caps. Periods of large SPEs can lead to a production of polar atmospheric odd nitrogen in excess of the ambient sources in the polar stratosphere and mesosphere, and may leave a large nitrate signal stratified in the polar ice cap. Auroral electrons and photoelectrons produce odd nitrogen in the thermosphere, some of which may be transported to the polar (>50 degrees) mesosphere and stratosphere. Sources of odd nitrogen in the polar middle atmosphere associated with SPEs, galactic cosmic rays, and auroral electron precipitation have been quantified. The relative contributions by the energetic particles sources to the Noy budget of the polar middle atmosphere (from tropopause to 50 km, from 50 degrees to 90 degrees latitude) are compared with the nitrates observed in the polar ice sheets.

Vitt, F. M.↗

Uncertainty Analysis in Space Radiation Protection

Space radiation is comprised of high energy and charge (HZE) nuclei, protons, and secondary radiation including neutrons. The uncertainties in estimating the health risks from galactic cosmic rays (GCR) are a major limitation to the length of space missions, the evaluation of potential risk mitigation approaches, and application of the As Low As Reasonably Achievable (ALARA) principle. For long duration space missio ns, risks may approach radiation exposure limits, therefore the uncertainties in risk projections become a major safety concern and methodologies used for ground-based works are not deemed to be sufficient. NASA limits astronaut exposures to a 3% risk of exposure induced death (REID) and protects against uncertainties in risks projections using an assessment of 95% confidence intervals in the projection model. We discuss NASA s approach to space radiation uncertainty assessments and applications for the International Space Station (ISS) program and design studies of future missions to Mars and other destinations. Several features of NASA s approach will be discussed. Radiation quality descriptions are based on the properties of radiation tracks rather than LET with probability distribution functions (PDF) for uncertainties derived from radiobiology experiments at particle accelerators. The application of age and gender specific models for individual astronauts is described. Because more than 90% of astronauts are never-smokers, an alternative risk calculation for never-smokers is used and will be compared to estimates for an average U.S. population. Because of the high energies of the GCR limits the benefits of shielding and the limited role expected for pharmaceutical countermeasures, uncertainty reduction continues to be the optimal approach to improve radiation safety for space missions.

Cucinotta, Francis A.↗

Electrochemical-driven green recovery of lithium, graphite and cathode from lithium-ion batteries using water

The expected exponential increase in consumption of lithium-ion batteries (LIBs) would pose a unique challenge to the availability of near-critical resources like lithium and graphite in the upcoming decade. In this work, we present a lithium recovery process that utilizes a degradation mechanism, i.e., lithium plating, as a tool to concentrate metallic lithium at the anode/separator interface for convenient extraction at room temperature – using only water. Electrochemical characterization of fast charged (1–6 C) LIBs yielded a maximum capacity fade of 50% over ten cycles. The lithium plating was confirmed via voltage plateau analysis, coulombic efficiency, and DC resistance measurements. A maximum lithium plating condition was observed to exist between 4C and 5C, thereby limiting the energy consumption in the extraction process. Post-mortem film thickness measurement showed an incrementing film deposition with a maximum of 35 µm thickness. SEM and XPS analysis confirmed increasing concentration of a dense dendritic metallic lithium deposition on the anode/separator interface with C-rate. A green recovery process was adopted to extract the concentrated metallic lithium using distilled water. The lithium from the plated film, solid/electrolyte interface (SEI), electrolyte, anode, and cathode, was extracted as salts. A 37% improvement in lithium recoverability was achieved with fast charging under ambient conditions. XPS analysis showed ~92% of lithium yield with no residual lithium in the graphite. In addition, the battery-grade graphite was recovered with 97% purity after heat treatment of the washed anode film, and concentrated transition metals oxides in the cathode to 93% purity for convenient extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wedge-and-strip anodes for centroid-finding position-sensitive photon and particle detectors

The paper examines geometries employing position-dependent charge partitioning to obtain a two-dimensional position signal from each detected photon or particle. Requiring three or four anode electrodes and signal paths, images have little distortion and resolution is not limited by thermal noise. An analysis of the geometrical image nonlinearity between event centroid location and the charge partition ratios is presented. In addition, fabrication and testing of two wedge-and-strip anode systems are discussed. Images obtained with EUV radiation and microchannel plates verify the predicted performance, with further resolution improvements achieved by adopting low noise signal circuitry. Also discussed are the designs of practical X-ray, EUV, and charged particle image systems.

Martin, C.↗

The Structural Basis of Substrate Recognition in an exo-beta-d-Glucosaminidase Involved in Chitosan Hydrolysis

Family 2 of the glycoside hydrolase classification is one of the largest families. Structurally characterized members of this family include enzymes with beta-galactosidase activity (Escherichia coli LacZ), beta-glucuronidase activity (Homo sapiens GusB), and beta-mannosidase activity (Bacteroides thetaiotaomicron BtMan2A). Here, we describe the structure of a family 2 glycoside hydrolase, CsxA, from Amycolatopsis orientalis that has exo-beta-D-glucosaminidase (exo-chitosanase) activity. Analysis of a product complex (1.85 A resolution) reveals a unique negatively charged pocket that specifically accommodates the nitrogen of nonreducing end glucosamine residues, allowing this enzyme to discriminate between glucose and glucosamine. This also provides structural evidence for the role of E541 as the catalytic nucleophile and D469 as the catalytic acid/base. The structures of an E541A mutant in complex with a natural beta-1,4-D-glucosamine tetrasaccharide substrate and both E541A and D469A mutants in complex with a pNP-beta-D-glucosaminide synthetic substrate provide insight into interactions in the +1 subsite of this enzyme. Overall, a comparison with the active sites of other GH2 enzymes highlights the unique architecture of the CsxA active site, which imparts specificity for its cationic substrate.

59 BASIC BIOLOGICAL SCIENCES↗

Electronic Interactions Between the Receptor-Binding Domain of Omicron Variants and Angiotensin-Converting Enzyme 2: A Novel Amino Acid–Amino Acid Bond Pair Concept

SARS-CoV-2 remains a severe threat to worldwide public health, particularly as the virus continues to evolve and diversify into variants of concern (VOCs). Among these VOCs, Omicron variants exhibit unique phenotypic traits, such as immune evasion, transmissibility, and severity, due to numerous spike protein mutations and the rapid subvariant evolution. These Omicron subvariants have more than 15 mutations in the receptor-binding domain (RBD), a region of the SARS-CoV-2 spike protein that is important for recognition and binding with the angiotensin-converting enzyme 2 (ACE2) human receptor. To address the impact of these high numbers of Omicron mutations on the binding process, we have developed a novel method to precisely quantify amino acid interactions via the amino acid–amino acid bond pair (AABP). We applied this concept to investigate the interface interactions of the RBD–ACE2 complex in four Omicron Variants (BA.1, BA.2, BA.5, and XBB.1.16) with its Wild Type counterpart. Based on the AABP analysis, we have identified all the sites that are affected by mutation and have provided evidence that unmutated sites are also impacted by mutation. We have calculated that the binding between RBD and ACE2 is strongest in OV BA.1, followed by OV BA.2, WT, OV BA.5, and OV XBB.1.16. We also present the partial charge values for all 311 residues across these five models. Our analysis provides a detailed understanding of changes caused by mutation in each Omicron interface complex.

Biochemistry & Molecular Biology↗

Study of Charged {kappa} Particle in J/{psi}{yields}K{sup {+-}K}{sub S{pi}}{sup {+-}{pi}0}

Based on a J/{psi} data sample of 58x10{sup 6} events at BESII, the decay of J/{psi}{yields}K{sup {+-}K}{sub S{pi}}{sup {+-}{pi}0} is studied. A low mass enhancement is visible in the sum of the K{sub S{pi}}{sup {+-}}and K{sup {+-}{pi}0} invariant mass spectra recoiling against K*(892){sup {+-}}. Partial wave analysis of this channel favors this low mass enhancement being a charged {kappa} particle with J{sup P} = 0{sup +} and with its pole locating at (849{+-}77{sub -14}{sup +18})-i(256{+-}40{sub -22}{sup +46}) MeV/c{sup 2} using a constant width Breit-Wigner. Also observed is J/{psi}{yields}K*(892){sup +}K*(892){sup -} with a branching fraction of (1.00{+-}0.19{sub -0.32}{sup +0.11})x10{sup -3}. All the above results are preliminary.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Statistical Analysis of the Economic Drivers of Battery Energy Storage in Commercial Buildings: Preprint

There is significant interest in using battery energy storage systems (BESS) to reduce peak demand charges, and therefore the life cycle cost of electricity, in commercial buildings. This paper explores the drivers of economic viability of BESS in commercial buildings through statistical analysis. A sample population of buildings was generated, a techno-economic optimization model was used to size and dispatch the BESS, and the resulting optimal BESS sizes were analyzed for relevant predictor variables. Explanatory regression analyses were used to demonstrate that peak demand charges are the most significant predictor of an economically viable battery, and that the shape of the load profile is the most significant predictor of the size of the battery.

25 ENERGY STORAGE↗

Operando Analysis of Gas Evolution in TiNb 2 O 7 (TNO)-Based Anodes for Advanced High-Energy Lithium-Ion Batteries under Fast Charging

TiNb 2 O 7 (TNO) is regarded as one of the promising next-generation anode materials for lithium-ion batteries (LIBs) due to its high rate capabilities, higher theoretical capacity, and higher lithiation voltage. Furthermore, this enables the cycling of TNO-based anodes under extreme fast charging (XFC) conditions with a minimal risk of lithium plating compared to that of graphite anodes. Here, the gas evolution in real time with TNO-based pouch cells is first reported via operando mass spectrometry. The main gases are identified to be CO 2 , C 2 H 4 , and O 2 . A solid–electrolyte interphase is detected on TNO, which continues evolving, forming, and dissolving with the lithiation and delithiation of TNO. The gas evolution can be significantly reduced when a protective coating is applied on the TNO particles, reducing the CO 2 and C 2 H 4 evolution by ~2 and 5 times, respectively, at 0.1C in a half-cell configuration. The reduction on gas generation in full cells is even more pronounced. The surface coating also enables 20% improvement in capacity under XFC conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron transport in dye-sensitized solar cells based on ZnO nanotubes : evidence for highy efficient charge collection and exceptionally rapiod dynamics.

Dye-sensitized solar cells based on ordered arrays of polycrystalline ZnO nanotubes, 64 {micro}m in length, are shown to exhibit efficient electron collection over the entire photoanode array length. Electrochemical impedance spectroscopy, open-circuit photovoltage decay analysis, and incident-photon-to-current efficiency spectra are used to quantify charge transport and lifetimes. Despite the relatively thick photoanode, the charge extraction time is found to be faster than observed in traditional TiO{sub 2} nanoparticle photoanodes. If the extraction dynamics are interpreted as diffusive, effective electron diffusion coefficients of up to 0.4 cm{sup 2} s{sup -1} are obtained, making these pseudo-1D photoanodes the fastest reported for an operating DSC to date. Rapid electron collection is of practical significance because it should enable alternative redox shuttles, which display relatively fast electron-interception dynamics, to be employed without significant loss of photocurrent.

14 SOLAR ENERGY↗

Meeting 2025 Zero Emission Vehicle Goals: An Assessment of Electric Vehicle Charging Infrastructure in Maryland

The National Renewable Energy Laboratory (NREL) has been enlisted to conduct a statewide assessment of the electric vehicle charging infrastructure requirements for Maryland to meet its goal of supporting 300,000 zero emission vehicles by 2025. NREL's Electric Vehicle Infrastructure Projection Tool (EVI-Pro) was used to generate scenarios of statewide charging infrastructure to support consumer plug-in electric vehicle (PEV) adoption based on travel patterns provided by INRIX (a commercial mapping/traffic company) that are used to characterize regional travel in Maryland and to anticipate future demand for PEV charging. Results indicate that significant expansion of Maryland's electric vehicle charging infrastructure will be required to support the state's PEV goal for 2025. Analysis shows that a fleet of 300,000 PEVs will require 17,400 workplace Level 2 plugs, 9,300 public Level 2 plugs, and 1,000 fast charge plugs. These estimates assume that future PEVs will be driven in a manner consistent with present day gasoline vehicles and that most charging will happen at residential locations. A sensitivity study explores edge cases pertaining to several assumptions, highlighting factors that heavily influence the projected infrastructure requirements. Variations in the makeup of the PEV fleet, evolving consumer charging preferences, and availability of residential charging are all shown to influence 2025 infrastructure requirements.

33 ADVANCED PROPULSION SYSTEMS↗

Understanding Chemical Bonding in Alloys and the Representation in Atomistic Simulations

Alloys are widely used in catalysts and structural materials. The nature of chemical bonding and the origin of alloy formation energies, defect energies, and interfacial properties have not been well understood to date but are critical to material performance. In this contribution, we explain the polar nature of chemical bonding and an implementation in classical and reactive atomistic simulations to understand such properties more quantitatively. Electronegativity differences between metal atoms lead to polar bonding, and exothermic alloy formation energies are related to charge transfer between the different elements. These differences can be quantified by atomic charges using pairwise charge increments, determined by matching the computed alloy formation energy to experimentally measured alloy formation energies using pair potentials for the pure metals. The polar character of alloys is comparable to organic molecules and partially ionic minerals, for example, AlNi and AlNi3 alloys assume significant atomic charges of ±0.40e and +0.60e/–0.20e, respectively. The subsequent analysis of defect sites and defect energies using force-field-based calculations shows excellent agreement with calculations using density functional theory and embedded atom models (EAM). The formation of vacancy and antisite defects is characterized by a redistribution of charge in the first shell of neighbor atoms in the classical models whereby electroneutrality is maintained and charge increments correlate with differences in electronegativity. The proposed atomic charges represent internal dipole and multipole moments, consistent with existing definitions for organic and inorganic compounds and with the extended Born model (Heinz, H.; Suter, U. W. J. Phys. Chem. B2004,108 (47), 18341–18352). The method can be applied to any alloy and has a reproducibility of ±10%. In contrast, quantum mechanical charge schemes remain associated with deviations exceeding ±100%. The atomic charges for alloys provide a simple initial measure for the internal electronic structure, surface adsorption of molecules, and reactivity in catalysis and corrosion. The models are compatible with the Interface force field (IFF), CHARMM, AMBER, OPLS-AA, PCFF, CVFF, and GROMOS for reliable atomistic simulations of alloys and their interfaces with minerals and electrolytes from the nanometer scale to the micrometer scale.

Chemistry↗