Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boundary layer analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Roughness Reduction of Additively Manufactured Steel by Electropolishing

Improving surface finishing is the critical step in the application of an additively manufactured (AM) component in high fatigue and corrosion-sensitive fields. This paper provides insights into surface properties of electropolished AM component made up of 316 stainless steel with > 6% carbon. We performed surface analysis with profilometer, scanning electron microscope, and AFM to investigate the electropolished and unpolished AM components. The first major discovery of the present work is that our optical profilometry study provided an estimate of the amount of material to be removed to achieve a shiny and smooth surface on 316 stainless steel AM part. One needs to remove more than 200 μm thick layer from the surface to make a mirror-smooth surface. Such estimation can enable researchers to incorporate requisite tolerance during the design stage itself. The second important finding of our work is that ultrasmooth microstructure on the AM surface appeared when preferential material removal occurred along the boundary of the hexagonal microscopic features. Additionally, our optical profilometry studies provided an analysis of several roughness parameters on the electropolished surface. Electropolishing was effective in reducing the surface roughness below ~ 0.1 μm RMS over microscopic regions. Observation of sub-μm RMS roughness was consistently observed with the optical profilometer, SEM, and AFM. SEM study revealed a significant change in the microstructure of the electropolished samples in a medium and highly smooth state. Here, we also conducted a water contact angle study and spectroscopic reflectance study on electropolished and unpolished AM component surfaces. Our study revealed that electropolishing is a highly promising route for improving the surface finishing of AM components.

36 MATERIALS SCIENCE↗

Numerical Analysis of the Effect of Infrared Radiation on Cryogenic Inertial Confinement Fusion Targets

The present work applies the finite element method to calculate the maximum allowable time that cryogenic inertial confinement fusion (ICF) targets can be exposed to infrared radiation (IR). Hence, a 3-D numerical model integrated with discrete coordinate radiation model was developed to investigate the influence of transmittance of the laser entrance holes (LEHs) and boundary conditions on the temperature field distribution and the maximum DT layer deterioration time for CH, Be, and diamond capsules. Our study shows that introducing such a radiation model can accurately obtain more detailed spatial and temporal distribution information in the ICF targets. The simulation results demonstrate that the Be and diamond capsules provided much better temperature field homogenization than the CH capsule under equivalent boundary conditions, but the CH capsule was heated more by IR radiation than the Be and diamond. In addition, the maximum DT layer deterioration time was significantly increased to 3 s when decreasing the transmittance of the LEH from 0.2 to 0.01. However, either reducing the capsule IR absorption or increasing the inner hohlraum IR absorption demonstrated no conclusive increase in the maximum DT layer deterioration time. These results are expected to provide useful parameters in the design of cryogenic targets and shroud systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear Deformation and Branching of the Solutions of Boundary-Value Problems of the Theory of Shells with Delaminations Under External Pressure

We consider the structure of branching of the solution of a nonlinear boundary-value problem of the theory of shells in the case of cylindrical shell with delamination area subjected to the action of external pressure. To find the solution, we use the generalized Kantorovich method applied to the analysis of the corresponding boundary-value problem. The complete structure of branching is presented for the solutions of the problem. We establish the existence of branches of the solution both with forms of deformation and joint deformation of the layers and with forms of deformation and separate deformation of the layers in the delamination region.

97 MATHEMATICS AND COMPUTING↗

Factors affecting relative humidity and its relationship with the long-term variation of fog-haze events in the Yangtze River Delta

Relative humidity (RH) is one of the most important parameters in the study of fog-haze. This paper first estimates the contributions of the key quantities (temperature, water vapor, air pollutant) and their combinations to the relative change of RH, and then investigates the relationships of RH with the long-term variation of haze and fog days based on the meteorological data in the Yangtze River Delta over the period 1970-2010.The main conclusions are as follows. (1) Temperature is the foremost factor influencing RH, with the effect of specific humidity and direct contribution of air pollutant being second and third. (2) RH shows a prominent descending trend in the Yangtze River Delta, due to global warming and the ‘analogous heat island effect’ (AHIE). (3) Decreasing RH was responsible for the reduction of fog days. The AHIE can explain the phenomenon in which fog days in metropolises are less than in small cities. (4) Granger causality analysis of inter-annual variation further shows that increasing aerosol loading Ganger-causes the increasing haze days, rather than meteorological parameters such as RH. High RH would enhance hygroscopic growth of particle and then suppress the planet boundary layer height (PBLH) and lead to more haze days, lower PBLH further increases aerosols and RH, this positive feedback mechanism can be established under the condition of aerosol loading being relatively stable and beyond the threshold for haze formation. (5) If aerosol emissions maintain the status quo, climate cooling would result in serious fog-haze events occurring more frequently in Yangtze River Delta. The research provide a scientific basis for understanding the influence of meteorological factors on RH and the connection between the variation of long term fog-haze days and RH under the background of climate change.

54 ENVIRONMENTAL SCIENCES↗

Low speed airfoil design and analysis

A low speed airfoil design and analysis program was developed which contains several unique features. In the design mode, the velocity distribution is not specified for one but many different angles of attack. Several iteration options are included which allow the trailing edge angle to be specified while other parameters are iterated. For airfoil analysis, a panel method is available which uses third-order panels having parabolic vorticity distributions. The flow condition is satisfied at the end points of the panels. Both sharp and blunt trailing edges can be analyzed. The integral boundary layer method with its laminar separation bubble analog, empirical transition criterion, and precise turbulent boundary layer equations compares very favorably with other methods, both integral and finite difference. Comparisons with experiment for several airfoils over a very wide Reynolds number range are discussed. Applications to high lift airfoil design are also demonstrated.

Eppler, R.↗

Experimental investigation of three helicopter rotor airfoils designed analytically

Three helicopter rotor airfoils designed analytically were investigated in a wind tunnel at Mach numbers from about 0.30 to 0.90 and Reynolds from about 0.8 to 2.3 x 10 to the 6th power. The airfoils had thickness-to-chord ratios of 0.08, 0.10, and 0.12 with maximum thickness at 40 percent chord. The camber distribution of each section was the same with maximum camber at 35 percent chord. The 10-percent-thick airfoil was also investigated at Reynolds numbers from 4.8 to 9.4 x 10 to the 6th power. The drag divergence Mach number of the 10-percent-thick airfoil is about 0.83 at a normal-force coefficient of 0 and about 0.72 at a normal-force coefficient of 0.6 at Reynolds numbers near 9 x 10 to the 6th power. The maximum normal-force coefficient is slightly less than that of the NACA 0012 airfoil tested in the same facility. The results indicate that a qualitative evaluation of the drag divergence can be made at normal-force coefficients up to the onset of boundary-layer separation by analytically predicting the onset of sonic flow at the airfoil crest. The qualitative results are conservative with respect to experimental values with the experimental drag divergence Mach number up to 0.05 higher than that indicated by analysis.

Bingham, G. J.↗

Analysis and computation of viscous subsonic primary and secondary flows

A new approximate flow analysis, designed to enable numerical solution as an initial value problem, is developed for a wide class of viscous subsonic flows at high Reynolds number and in straight or smoothly curved three-dimensional flow geometries. The analysis is coordinate-independent and corrects an a priori known inviscid primary flow for viscous and thermal effects, secondary flows, total pressure distortion, internal flow blockage and pressure drop. Computed results include laminar solutions for three-dimensional boundary layer flow, fully viscous flow in circular arc ducts, and also flow in a curved duct shaped like a turbine blade passage.

Briley, W. R.↗

Overview of advanced wing design

Examples of experiment theory correlation are presented to give an indication of the capabilities and limitations of wing design and analysis for transonic applications by potential flow theory. The examples include correlations of experimental pressure distributions with theoretical results from isolated wing codes and wing-body codes. Both conservative and non conservative differencing as well as body and boundary layer corrections are considered. A full potential isolated wing code correlates well with data from an isolated wing test but may give poor prediction of the aerodynamic characteristics of some wing-body configurations. Potential flow wing body codes were found to improve the correlation for the wing-body configurations considered.

Hicks, R. M.↗

Analytical and experimental study of flow phenomena in noncavitating rocket pump inducers

The flow processes in rocket pump inducers are summarized. The experimental investigations were carried out with air as the test medium. The major characteristics features of the rocket pump inducers are low flow coefficient (0.05 to 0.2) large stagger angle (70 deg to 85 deg) and high solidity blades of little or no camber. The investigations are concerned with the effect of viscosity not the effects of cavitation. Flow visualization, conventional and hot wire probe measurement inside and at the exit of the blade passage, were the analytical methods used. The experiment was carried out using four three and two bladed inducers with cambered blades. Both the passage and the exit flow were measured. The basic research and boundary layer investigation was carried out using a helical flat plate (of some dimensions as the inducer blades tested), and flat plate helical inducer (four bladed). Detailed mean and turbulence flow field inside the passage as well as the exit of the rotor were derived from these measurement. The boundary layer, endwall, and other passage data reveal extremely complex nature of the flow, with major effects of viscosity present across the entire passage. Several analyses were carried out to predict the flow field in inducers. These included an approximate analysis, the shear pumping analysis, and a numerical solution of exact viscous equations with approximate modeling for the viscous terms.

Lakshminarayana, B.↗

Through-flow modeling of axial turbomachinery

Through-flow analysis practices are presently evaluated by comparing their results with the flow measured on a single-stage compressor rotor that had been tested at the nominal design flow coefficient of 0.85, using both thick and thin inlet endwall boundary layers. Sufficient experimental data was available for both the required aerodynamic input of the calculations and the detailed assessment of the computational results obtained. It is noted that, while through-flow theory reasonably characterizes many aspects of the flow, the features less well predicted suggest the need for a more precise formulation of the equation, and the inclusion of such often neglected effects as the radial component of blade force and/or the fluctuation terms due to the flow's nonaxisymmetry, as found in the phenomenon of blockage.

Dring, R. P.↗

A novel centrifugal diffuser test device

A large scale (2 in.-wide test vanes at 50-in. inlet diameter), low speed (100-200 ft/sec) steady flow radial cascade wind tunnel for diffuser studies was designed, built and tested. The apparatus was shown to provide flow angles (from radial) in the range of 58-72 deg with suitable spanwise profiles. The novel flow angle control mechanism was shown to work, but measured flow angles were somewhat smaller than expected. The mechanism for controlling case-wall boundary layer profile did not behave as predicted. Attempts to predict the generated flow both analytically and with computational codes are compared with initial measurements. The low speed apparatus will be used to obtain detailed data for diffuser design and analysis code verification, and to provide experience toward the design of a high speed device.

Shreeve, R. P.↗

Sensitivity of a mesoscale model to initial specification of relative humidity, liquid water and vertical motion

The influence of synoptic scale initial conditions on the accuracy of mesoscale precipitation modeling is investigated. Attention is focused on the relative importance of the water vapor, cloud water, rain water, and vertical motion, with the analysis carried out using the Limited Area Mesoscale Prediction System (LAMPS). The fully moist primitive equation model has 15 levels and a terrain-following sigma coordinate system. A K-theory approach was implemented to model the planetary boundary layer. A total of 15 sensitivity simulations were run to investigate the effects of the synoptic initial conditions of the four atmospheric variables. The absence of synoptic cloud and rain water amounts in the initialization caused a 2 hr delay in the onset of precipitation. The delay was increased if synoptic-scale vertical motion was used instead of mesoscale values. Both the delays and a choice of a smoothed moisture field resulted in underestimations of the total rainfall.

Kalb, M. W.↗

Heat and mass transfer rates during flow of dissociated hydrogen gas over graphite surface

To improve upon the performance of chemical rockets, the nuclear reactor has been applied to a rocket propulsion system using hydrogen gas as working fluid and a graphite-composite forming a part of the structure. Under the boundary layer approximation, theoretical predictions of skin friction coefficient, surface heat transfer rate and surface regression rate have been made for laminar/turbulent dissociated hydrogen gas flowing over a flat graphite surface. The external stream is assumed to be frozen. The analysis is restricted to Mach numbers low enough to deal with the situation of only surface-reaction between hydrogen and graphite. Empirical correlations of displacement thickness, local skin friction coefficient, local Nusselt number and local non-dimensional heat transfer rate have been obtained. The magnitude of the surface regression rate is found low enough to ensure the use of graphite as a linear or a component of the system over an extended period without loss of performance.

Nema, V. K.↗

Linear and nonlinear dynamic analysis by boundary element method

An advanced implementation of the direct boundary element method (BEM) applicable to free-vibration, periodic (steady-state) vibration and linear and nonlinear transient dynamic problems involving two and three-dimensional isotropic solids of arbitrary shape is presented. Interior, exterior, and half-space problems can all be solved by the present formulation. For the free-vibration analysis, a new real variable BEM formulation is presented which solves the free-vibration problem in the form of algebraic equations (formed from the static kernels) and needs only surface discretization. In the area of time-domain transient analysis, the BEM is well suited because it gives an implicit formulation. Although the integral formulations are elegant, because of the complexity of the formulation it has never been implemented in exact form. In the present work, linear and nonlinear time domain transient analysis for three-dimensional solids has been implemented in a general and complete manner. The formulation and implementation of the nonlinear, transient, dynamic analysis presented here is the first ever in the field of boundary element analysis. Almost all the existing formulation of BEM in dynamics use the constant variation of the variables in space and time which is very unrealistic for engineering problems and, in some cases, it leads to unacceptably inaccurate results. In the present work, linear and quadratic isoparametric boundary elements are used for discretization of geometry and functional variations in space. In addition, higher order variations in time are used. These methods of analysis are applicable to piecewise-homogeneous materials, such that not only problems of the layered media and the soil-structure interaction can be analyzed but also a large problem can be solved by the usual sub-structuring technique. The analyses have been incorporated in a versatile, general-purpose computer program. Some numerical problems are solved and, through comparisons with available analytical and numerical results, the stability and high accuracy of these dynamic analysis techniques are established.

Ahmad, Shahid↗

On the receptivity problem for 0(1) wavelength Goertler vortices

In this paper, we make an investigation of the receptivity of boundary layer flows to Gortler vortex modes. A study by Denier, Hall, and Seddougui (1991) of the generation of vortices by wall roughness elements concluded that such elements are extremely poor as mechanisms to stimulate short wavelength modes, but that analysis was in error. We re-examine this problem and demonstrate how the form of the wall roughness is crucial in determining the vortex stability characteristics downstream of the roughness. In particular, we investigate the cases of both isolated and distributed forcing functions and show that, in general, a distributed function is much more important in generating vortices than are either isolated roughness or freestream disturbances.

Bassom, Andrew P.↗

Permeability of Rigid Fibrous Refractory Insulations

Rigid fibrous refractory insulations (TPS tiles) are integral components of many spacecraft thermal protection systems. These materials are composed of refractory fibers With diameters on the order of 1 to 15 micrometers. They are lightweight and have an open, highly porous microstructure. Typical densities are less than 500 kilograms per cubic meters, and porosities generally exceed 0.8. Because of their open porosity, these materials are permeable to gas glow. There are numerous instances in which internal gas transport in a thermal protection system could be important; examples include the penetration of hot boundary-layer gases into the insulation, the flow of decomposition (pyrolysis) products from the interior, the use of convective flows to mitigate ice formation caused by cryopumping, and the design of refractory vents for pressure equilibration during atmospheric entry. Computational analysis of gas flow through porous media requires values of permeability which have not previously been available for the rigid fibrous insulations used in thermal protection systems. This paper will document measurements of permeability for a variety of insulations from NASA's LI, FRCI, and AETB families of lightweight ceramic ablators. The directional anisotropy of permeability and its dependence on gas pressure and material density will be presented. It will be shown that rarified-flow effects are significant in the flow through such materials. Connections will be drawn between the insulation microstructure and permeability. The paper will also include representative computations of flow through rigid fibrous insulations.

Marschall, J.↗

Advanced IR System For Supersonic Boundary Layer Transition Flight Experiment

Infrared thermography is a preferred method investigating transition in flight: a) Global and non-intrusive; b) Can also be used to visualize and characterize other fluid mechanic phenomena such as shock impingement, separation etc. F-15 based system was updated with new camera and digital video recorder to support high Reynolds number transition tests. Digital Recording improves image quality and analysis capability and allows for accurate quantitative (temperature) measurements and greater enhancement through image processing allows analysis of smaller scale phenomena.

Banks, Daniel W.↗

Development of a Perfectly Matched Layer Technique for a Discontinuous-Galerkin Spectral-Element Method

The perfectly matched layer (PML) technique is developed in the context of a high- order spectral-element Discontinuous-Galerkin (DG) method. The technique is applied to a range of test cases and is shown to be superior compared to other approaches, such as those based on using characteristic boundary conditions and sponge layers, for treating the inflow and outflow boundaries of computational domains. In general, the PML technique improves the quality of the numerical results for simulations of practical flow configurations, but it also exhibits some instabilities for large perturbations. A preliminary analysis that attempts to understand the source of these instabilities is discussed.

Spectral-Element↗