Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Texture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Conservation management decreases surface runoff and soil erosion

Conservation management practices – including agroforestry, cover cropping, no-till, reduced tillage, and residue return – have been applied for decades to control surface runoff and soil erosion, yet results have not been integrated and evaluated across cropping systems. In this study we collected data comparing agricultural production with and without conservation management strategies. We used a bootstrap resampling analysis to explore interactions between practice type, soil texture, surface runoff, and soil erosion. We then used a correlation analysis to relate changes in surface runoff and soil erosion to 13 other soil health and agronomic indicators, including soil organic carbon, soil aggregation, infiltration, porosity, subsurface leaching, and cash crop yield. Across all conservation management practices, surface runoff and erosion had respective mean decreases of 67% and 80% compared with controls. Use of cover cropping provided the largest decreases in erosion and surface runoff, thus emphasizing the importance of maintaining continuous vegetative cover on soils. Coarse- and medium-textured soils had greater decreases in both erosion and runoff than fine-textured soils. Changes in surface runoff and soil erosion under conservation management were highly correlated with soil organic carbon, aggregation, porosity, infiltration, leaching, and yield, showing that conservation practices help drive important interactions between these different facets of soil health. This study offers the first large-scale comparison of how different conservation agriculture practices reduce surface runoff and soil erosion, and at the same time provides new insight into how these interactions influence the improvement or loss of soil health.

58 GEOSCIENCES↗

Collective modes of three-dimensional magnetic structures: A study of target skyrmions

Three-dimensional magnetic textures present their richness not only in variety of ground state structures, but also in their dazzling collective modes. As an example, the target skyrmion, a topological spin texture with a central skyrmion and an extra concentric helical ring, has been enabled by confining a chiral magnet in a nanodisk geometry. In this work we investigate the collective spin wave modes of the target skyrmion in the external field region of -400 mT to 400 mT. Through micromagnetic simulations we reproduced three major phases of the target skyrmion, and derived resonance modes at varying external magnetic field by the power spectral density study. All typical modes were resolved in terms of their dynamical snapshots in temporal domain and the corresponding spatial Fourier transformations. Some modes are shown to behave similarly in-plane but differently out-of-plane, and vice versa. This suggests, on a broader scope, that both responses will be necessary to fully characterize collective modes of three-dimensional spin textures.

36 MATERIALS SCIENCE↗

Residual strain and microstructure evolution in 316L stainless steel fabricated by hybrid additive/subtractive manufacturing

The extreme thermal gradients in additive manufacturing (AM) result in residual strains. Subsequent machining operations can relieve the AM strains but can introduce additional strains. AM and machining on the same platform, also called interleaving, during hybrid manufacturing has been shown to improve productivity. However, the impacts of these operations on the resulting residual strains are not well understood. In this investigation, neutron diffraction was used to measure residual strains in hybrid manufactured 316L stainless steel where blown-powder laser directed energy deposition (DED), and machining operations were interleaved in 1-inch intervals. We observe that the dominant texture developed during AM, resulting from different spot sizes and deposition parameters, significantly affects residual strain evolution. A dominant <011> texture along the build direction does not show any strain localization during interleaved deposition and machining whereas a dominant <001> texture shows strong tensile strain localization consistent with the pauses for machining at the end of AM step. Using coolant during machining can further alter the residual strain evolution. Our work shows that a combination of AM parameters and machining strategy can be used to influence the nature and magnitude of residual strains in components fabricated using convergent manufacturing technologies.

Hybrid manufacturing↗

Anisotropic temperature-dependent elastic constants and thermal conductivities of TRISO particle coatings

Tristructural isotropic (TRISO) particles show great promise as a candidate fuel for use in several next-generation high-temperature nuclear reactor designs due to their structural integrity and fuel performance at high temperatures and burnups. Computational codes exist that can simulate TRISO fuel performance characteristics and failure probabilities under extreme conditions which require knowledge of the TRISO coatings’ thermophysical properties. The thermophysical descriptions of the TRISO particle's layers (i.e., buffer, pyrolytic carbon, and silicon carbide) currently used in fuel performance codes, however, assume that many of these properties are constant with respect to temperature or texture. In this paper, we obtain the full elastic stiffness tensors of the carbon and silicon carbide layers, which have transversely isotropic symmetry. Additionally, the calculated elastic properties of each of the coating layers are in remarkable agreement with the current models at room temperature and correct orientations. Additionally, the textured 3C-SiC layer was found to exhibit novel auxetic behavior above 1500 °C. The anisotropic temperature-dependent thermal conductivities of the carbon layers were calculated using acoustical Grüneisen-Debye theory which are in excellent agreement with current models at room temperature and correct orientations. These texture- and temperature-dependent relationships can be incorporated into the thermophysical description of TRISO particles in order to more accurately model fuel performance and failure probabilities under extreme conditions in forthcoming high-fidelity computational simulations.

36 MATERIALS SCIENCE↗

Pressure response of vacancy ordered maghemite ({gamma}-Fe{sub 2}O{sub 3}) and high pressure transformed hematite ({alpha}-Fe{sub 2}O{sub 3})

Combined XRD and Moessbauer effect spectroscopy studies to high pressures of {approx}30 GPa of vacancy ordered maghemite are presented. The vacancy ordered superstructure is robust and remains intact up to the pressure-induced onset transition to hematite at 13-16 GPa. The pressure transformed hematite is shown to be crystallographically textured, unlike the randomised low pressure maghemite phase. This arises out of a pressure or stress instigated topotactic transformation of the cubic-spinel to hexagonal-corundum structure. The textured sample permits us to obtain information on the spin reorientation behavior of the pressure transformed hematite in compression and decompression sequences. Spin reorientation is restricted to {approx}15 Degree-Sign over wide pressure ranges, attributable to the effect of entrapped vacancies in the high pressure structure. Thus there are structural and magnetic peculiarities specific to pressure transformed hematite not evident in pressurized hematite starting material. These are triggered by the maghemite{yields}hematite transformation. - Graphical abstract: Pressure instigated topotactic transformation of vacancy ordered {gamma}-Fe{sub 2}O{sub 3}{yields}{alpha}-Fe{sub 2}O{sub 3}. There is restricted spin (B{sub hf}) reorientation in the new pressure transformed hematite due to entrapped vacancies. The change in direction of V{sub zz} signifies a distortion of the FeO{sub 6} octahedral local environment. Highlights: Black-Right-Pointing-Pointer Robust vacancy ordered superstructure in maghemite to high pressures. Black-Right-Pointing-Pointer Pressure instigated topotactic transformation to hematite and subsequent texture. Black-Right-Pointing-Pointer Defect trapping in the pressure transformed hematite. Black-Right-Pointing-Pointer Entrapped defects restricts spin reorientation in pressure transformed hematite. Black-Right-Pointing-Pointer Contrasting behavior with pressurized hematite starting material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High temperature structural and magnetic properties of cobalt nanorods

We present in this paper the structural and magnetic properties of high aspect ratio Co nanoparticles ({approx}10) at high temperatures (up to 623 K) using in-situ X ray diffraction (XRD) and SQUID characterizations. We show that the anisotropic shapes, the structural and texture properties are preserved up to 500 K. The coercivity can be modelled by {mu}{sub 0}H{sub C}=2(K{sub MC}+K{sub shape})/M{sub S} with K{sub MC} the magnetocrystalline anisotropy constant, K{sub shape} the shape anisotropy constant and M{sub S} the saturation magnetization. H{sub C} decreases linearly when the temperature is increased due to the loss of the Co magnetocrystalline anisotropy contribution. At 500 K, 50% of the room temperature coercivity is preserved corresponding to the shape anisotropy contribution only. We show that the coercivity drop is reversible in the range 300-500 K in good agreement with the absence of particle alteration. Above 525 K, the magnetic properties are irreversibly altered either by sintering or by oxidation. - Graphical abstract: We present in this paper the structural and magnetic properties of high aspect ratio Co nanorods ({approx}10) at high temperatures (up to 623 K) using in-situ X-ray diffraction and SQUID characterizations. We show that the anisotropic shapes, the structural and texture properties are preserved up to 500 K. Above 525 K, the magnetic properties are irreversibly altered either by sintering or by oxidation. Highlights: Black-Right-Pointing-Pointer Ferromagnetic Co nanorods are prepared using the polyol process. Black-Right-Pointing-Pointer The structural and texture properties of the Co nanorods are preserved up to 500 K. Black-Right-Pointing-Pointer The magnetic properties of the Co nanorods are irreversibly altered above 525 K.

36 MATERIALS SCIENCE↗

The Effects of Heterogeneity in Magma Water Concentration on the Development of Flow Banding and Spherulites in Rhyolitic Lava

This study focuses on the origin of flow-banded rhyolites that consist of compositionally similar darker and lighter flow bands of contrasting texture and color. Infrared radiation was used to obtain Fourier transform infrared (FTIR) spectra from which water concentrations were calculated, and to map variations in water concentrations across zones of spherulites and glass from the 23 million year old Sycamore Canyon lava flow of southern Arizona. Lighter-colored, thicker flow bands consist of gray glass, fine-grained quartz, and large (1.0 to 1.5 mm) spherulites. Darker-colored, thinner flow bands consist of orange glass and smaller (0.1 to 0.2 mm) spherulites. The centers of both large and small spherulites are occupied by either (1) a quartz or sanidine crystal, (2) a granophyric intergrowth, or (3) a vesicle. Mapping of water concentration (dominantly OH- in glass and OH- and H2O in sanidine crystals) illustrates fluctuating water availability during quenching of the host melt. Textures of large spherulites in the lighter (gray) bands in some cases indicate complex quenching histories that suggest that local water concentration controlled the generation of glass versus crystals. Small spherulites in darker (orange) bands have only one generation of radiating crystal growth. Both the glass surrounding spherulites, and the crystals in the spherulites contain more water in the gray flow bands than in the orange flow bands. Flow banding in the Sycamore Canyon lava flow may have originated by the stretching of a magma that contained pre-existing zones (vesicles or proto-vesicles) of contrasting water concentration, as the magma flowed in the conduit and on the surface. Variation in the original water concentration in the alternating layers is interpreted to have resulted in differences in undercooling textures in spherulites in the lighter compared to the darker flow bands.

58 GEOSCIENCES↗

Hierarchical macro-mesoporous structures in the system TiO{sub 2}-Al{sub 2}O{sub 3}, obtained by hydrothermal synthesis using Tween-20 as a directing agent

Macro-mesoporous powders of titania, alumina, and mixed titania-20%alumina systems were obtained by hydrothermal synthesis employing surfactant Tween-20 as structural directing agent in order to promote the textural properties of titania. The effect of the alumina in the titania phase and on textural properties was analyzed. The obtained powders presented a macroporous channel structure that was characterized by X-ray diffractometry, scanning and transmission electron microscopy, N{sub 2} adsorption-desorption analysis, pore size distribution, Fourier transform infrared spectrometry, and thermogravimetric analysis. It was found that alumina content retarded the anatase phase crystallization and increased the Brunauer-Emmet-Teller surface area from 136 to 210 m{sup 2}/g. The powders calcined at 400 deg. C are thermally stable and possess an interconnected macro-mesoporous hierarchical structure; the results indicate that this synthesis can be employed to prepare mixed titania-alumina with good textural properties.

36 MATERIALS SCIENCE↗

Effect of cold rolling on microstructure and mechanical property of extruded Mg–4Sm alloy during aging

Microstructure and mechanical properties of the Mg–4Sm (wt.%) alloy, prepared via combined processes of extrusion, cold rolling and aging, have been investigated. The hot extruded alloy exhibits a weak rare earth magnesium alloy texture with < 11 − 21 >//ED, while the cold-rolled alloy shows a stronger basal texture with < 0001 >//ND. Many tensile twins and double twins are observed in grains after rolling. The cold-rolled alloy shows a weak age-hardening response compared with the extruded alloy, which is the result of more precipitation in the twin boundary during aging. The rolled alloy exhibits almost no precipitate free zone during aging compared with the extruded alloy. The higher proof stress of the rolled alloy in peak-aged condition is attributed to the presence of twin boundaries, stronger basal texture, higher dislocation density, and the suppression of precipitate free zone compared with the extruded alloy. - Highlights: • No precipitate free zone appears in cold-rolled alloy after aging. • Segregation and precipitates are observed in twin boundaries and grain boundaries. • Cold-rolled alloy shows a weak age-hardening response.

36 MATERIALS SCIENCE↗

Revealing the nanostructure of calcium phosphate coatings using HRTEM/FIB techniques

Herein, we report on the micro- and nanostructure of the calcium phosphate coating produced by pulsed laser deposition (PLD), using focused ion beam (FIB) lamella sample preparation and transmission electron microscopy (TEM) as the characterization technique. The initial selected area electron diffraction (SAED) data demonstrated the presence of hydroxyapatite (HA) over any other possible calcium phosphate crystalline structure and the polycrystalline nature of the coating. Moreover, the SAED analyses showed clear textured ring patterns coherent with the presence of a preferred orientation in the HA nano-crystal growth. The SAED data also indicated that the coating appears to be textured in the 〈002〉 crystalline direction. Dark-field images obtained using 002 as the working reflection showed a clear oriented crystal growth in columns, from bottom to top. These columns have a peculiar arrangement of nano-crystals since, in some cases, the preferred orientation appears to start at a certain distance from the substrate. Direct d-spacing measurements on high-resolution TEM images provided further proof of the presence of an HA nano-crystal structure. The reported data may be of interest in the future to adjust the microstructure of the HA coatings. - Highlights: •The FIB lift-out technique allows a very site-specific sample preparation method for HRTEM analysis. •It also permits a fast assessment of the HA coating thickness and elemental composition (EDS). •The coatings exhibit a nano-crystalline nature, with a texturing effect along the 002 planes. •PLD is suitable for the production of crystalline c-axis oriented hydroxyapatite coatings. •The crystalline HA phase in the PLD coating is very similar to the present in bone.

36 MATERIALS SCIENCE↗

Effect of cold rolling on the microstructural evolution of new β-typed Ti–6Mo–6V–5Cr–3Sn–2.5Zr alloys

A Ti–6Mo–6V–5Cr–3Sn–2.5Zr (wt.%) alloy was designed as a new metastable β-Ti alloy. The effect that cold rolling had on the microstructural evolution of the material was investigated via optical microscopy (OM), X-ray diffraction (XRD), electron back-scattered diffraction (EBSD) and transmission electron microscopy (TEM) measurements. A single β phase formed in the alloy after solution treatment at 780 °C for 30 min followed by water quenching. The solution-treated alloy was cold rolled with thickness reductions of 10%, 30%, 50% and 70%, and the hardness values increased as the thickness of the specimen decreased. The textures of the cold rolled specimen were characterized according to the 〈110〉 partial parallel to the rolling direction as the rolling reduction increased. The crystallographic orientation showed principal α-fiber textures for (111)〈110〉 and (112)〈110〉. The cold deformation led to the appearance of martensite α″ phases, particularly stress-induced martensite (SIM) α″ phases. - Highlights: • Effect of cold rolling on new β-typed Ti-6Mo-6V-5Cr-3Sn-2.5Zr alloy was studied. • A single β phase was obtained after solution treatment at 780 °C for 30 min. • α-Fiber textures became dominated with the increase in cold rolling reduction. • A stress-induced α″ martensite was caused by cold rolling.

36 MATERIALS SCIENCE↗

Enhanced strength and electrical conductivity of ultrafine-grained Al-Mg-Si alloy processed by hydrostatic extrusion

Highlights: • Al-Mg-Si alloy was subjected to hydrostatic extrusion combined with aging treatment. • UFG Al-Mg-Si alloy with UTS of 332 MPa and conductivity of 58% IACS was obtained. • Precipitation process depended on applied strains and crystallographic texture. • Strengthening effect was achieved by UFG structure and needle-like β″ precipitates. • Precipitation of β″ and spherical β′/β particles at GB provided high conductivity. - Abstract: The effect of hydrostatic extrusion combined with an artificial aging on microstructure, mechanical and electrical properties of 6101 Al-Mg-Si alloy was investigated. It has been shown that such thermo-mechanical treatment is an effective method for producing of long wires with an ultrafine-grained microstructure (grain size of 300–400 nm) and enhanced ultimate tensile strength (> 330 MPa) and electrical conductivity (up to 58% IACS). The mechanical behavior of 6101 Al-Mg-Si alloy depended strongly on applied strains by hydrostatic extrusion and crystallographic texture. Higher accumulative strain accelerated the precipitation kinetics but decreased the age hardening response. The double fiber <100> and <111> texture was observed for hydrostatically extruded samples. The <001> grains with homogenously distributed needle-like β″ precipitates provided precipitation strengthening of material while <111> grains resulted in more efficient grain boundary strengthening. Quantitative microstructure characterization allowed adjusting physical model to estimate the electrical conductivity and compare it with experimental data. The high conductivity was provided mainly by decomposition of solid solution due to precipitation of needle-like β″ precipitates in the grain interior and spherical β′ or β particles located at grain boundaries.

36 MATERIALS SCIENCE↗

Microstructure and mechanical properties of extruded Mg-Gd-Y-Zn-Zr alloys filled with intragranular LPSO phases

Highlights: • Intragranular thin-platelet LPSO phases strongly restrict the DRX. • The low extrusion ratio fails to widely break the intragranular LPSO. • The large extrusion ratio results in the full DRX via the CDRX mechanism. • Finer DRX-ed grains and LPSO induce the higher yield strength and elongation. • The larger grain size causes an increase in the strain hardening rate. - Abstract: A comparison has been made on the dynamic recrystallization (DRX), texture, and mechanical properties of the Mg-5.5Gd-4.4Y-1.1Zn-0.5Zr (wt%) alloys extruded with different ratios (ER, 36 and 7.1). Intragranular long-period stacking ordered (LPSO) phases strongly restrict the DRX by restraining the lattice rotation of α-Mg grains and hindering the migration of the boundaries of DRX-ed grains. Extrusion with ER of 36 can widely break the intragranular LPSO phases and create a fully DRX-ed microstructure with a relatively random texture, while the lower ER of 7.1 fails to break the LPSO and leads to a bimodal microstructure with a strong basal fiber texture. Finer DRX-ed grains and smaller LPSO phases account for the superior tensile yield strength and elongation of the ER36 alloy. However, the ultimate tensile strength of the ER7.1 alloy catches up because its larger grain size causes an increase in the strain hardening rate.

36 MATERIALS SCIENCE↗

Magnetic Barkhausen noise characterization of two pipeline steels with unknown history

Highlights: • The hardness, microstructure, texture and MBN of two pipeline steels were analyzed. • The angular MBN results revealed possible manufacturing histories of the two pipelines. • The MBN is closely related to the processing history, microstructure and stress state. • The use of MBN technique can help address the integrity issues in the pipeline industry. Steel samples cut from two line pipes with unknown processing history were analyzed using magnetic Barkhausen noise (MBN), electron backscatter diffraction (EBSD) and Vickers hardness techniques on the pipe surface and on sections through the wall thickness. The results show that the MBN responses vary significantly not only between the two pipe steels, but also among different thickness layers of each steel. Both steels show considerable variations in MBN at different locations on the surfaces. For one steel, the surface MBN illustrates an inverse linear relationship with respect to the hardness, while the other does not depict such a relation since the variation in hardness at different locations is very small. Across the thickness, the microstructure (phase and grain size) of both steels is quite similar, but the texture shows significant differences. Again, there is a large difference in hardness across the thickness for one steel, while the other only shows very small variation in hardness across the thickness. The variations in average MBN across the wall thickness for both steels are quite large. Angular MBN measurements on the sectioned samples revealed significant discrepancies in the magnetic anisotropy in the two steels. Based on the analysis of the angular MBN data with respect to the single and dual easy axis models, one pipe can be determined to have been manufactured through a seam welding process, while the other may have been formed by spiral welding. Due to the residual stresses in the steel samples, the effect of the crystallographic texture on the anisotropy in MBN response has essentially been suppressed.

36 MATERIALS SCIENCE↗

Obtaining aluminas from the thermal decomposition of their different precursors: An {sup 27}Al MAS NMR and X-ray powder diffraction studies

Graphical abstract: - Highlights: • We synthesized three precursors of alumina from different methods. • The calcination of the precursors generated several alumina polymorphs. • XRD and NMR were used for structural investigation of the polymorphs. • The synthesis route determines the structural and textural properties of the solids. - Abstract: A commercial sample of Boehmite was used as precursor of alumina polymorphs. For comparison, three other precursors were synthesized from different methods. Particularly, the use of excess of urea promoted a very crystalline form of basic aluminum carbonate. The characteristics of the four precursors were investigated by thermal, vibrational and X-ray powder diffraction (XRD) analysis. Additionally, the nuclear magnetic resonance, with magic angle spinning ({sup 27}Al MAS NMR), was used to verify the coordination of aluminum cations. Each precursor was calcined at various temperatures generating alumina polymorphs, which were structurally analyzed by XRD and {sup 27}Al MAS NMR. Due to interest in catalysis supports, special attention was given to the γ-Al{sub 2}O{sub 3} phase, which in addition to structural investigation was subjected to textural analysis. The results showed that, from different synthesis procedures and common route of calcination, one can obtain materials with the same composition but with different structural and textural properties, which in turn can significantly influence the performance of a supported catalyst.

36 MATERIALS SCIENCE↗

Fully implicit crystal plasticity models representing orientations with modified Rodrigues parameters

Here, this work describes a crystal plasticity formulation combining several mathematical, numerical, and implementation choices to produce a highly efficient model. Specifically, the key choices in the implementation are (1) representing orientations with modified Rodrigues parameters, (2) implementing a fully coupled implicit time integration for the elastic stretch, the crystal orientations, and the model internal variables, (3) implementing the model in the NEML2 constitutive modeling framework, based on PyTorch, to vectorize the calculations and port the computation to GPUs and other hardware accelerators, and (4) an exact implementation of the consistent tangent matrix, even for arbitrary coupling to other field variables beyond the displacements, like temperature, neutron fluence, etc. The first two features of the model are, to our knowledge, novel. The paper considers each of these choices individually as well as the final model as a whole. This includes a full description of modified Rodrigues parameters, their advantages over other representations of orientations, the mathematical formulae and tools required to implement a model with modified Rodrigues parameters, and a detailed description of the geometry of the space of modified Rodrigues parameters (in an appendix). It also includes a description of a fully implicit time integration scheme for the orientations and the advantages in representing orientations with modified Rodrigues parameters in implementing such a model. The work then assess, via numerical examples, the advantages of fully coupled implicit time integration versus more common decoupled and explicit time integration schemes. These studies demonstrate the computational advantages of fully coupled integration versus other time integration algorithms, though the performance of the competing models depends on the complexity of the underlying single crystal model. The study concludes by demonstrating that the choice of time integration method affects the sharpness of the predicted texture, with explicit methods for integrating the orientations overestimating texture sharpness and implicit methods underestimating texture sharpness.

Crystal plasticity↗

Effects of surface treatments on ABS mechanical properties from fused filament fabrication

This paper examines the influence of surface treatments on the mechanical properties of acrylonitrile butadiene styrene (ABS) samples printed by fused filament fabrication (FFF). Prior efforts have applied brushing, painting, solvent dipping, infiltration, and vapor smoothing as post-processing surface treatments to improve the mechanical properties of FFF components. Additionally, because FFF can produce components with undesirable surface roughness, mechanical abrasion, epoxy coating, and acetone treatment may increase tensile strength by decreasing stress concentrations. Ridged surface texture may provide desirable tribological or handling properties. Based on these opportunities, this paper investigates abrasive media blasting, epoxy coating, acetone immersion, and ridged texturing surface treatments on the tensile strength and other mechanical properties of FFF ABS samples. ASTM D638-14 Type-I samples were printed, treated on all sample sides, and tested. From tensile tests, the elastic modulus, tensile strength, and fracture strain for both the untreated and treated ABS samples were calculated. For each sample, the surface finish and fracture macromorphology were observed with optical microscopy and the roughness values for the surface finish were calculated from profilometer data. Furthermore, samples were submerged in water and weighed periodically to measure mass changes due to water absorption. From surface profilometry and optical miscopy data, mechanical media blasting, epoxy coating, and immersion in all concentrations of acetone decreased surface roughness. Overall, on average, grit blasting with large beads and epoxy coating led to 2.6% and 1.2% increases in tensile strength, respectively; immersion in 40% acetone led to a 1.9% increase in tensile strength while treatment in 60% and 80% acetone decreased tensile strength by 4.9% and 1.9%, respectively. The study concludes that only grit blasting with large beads, immersion in 60% acetone, and the ridged texture significantly affected the tensile strength.

36 MATERIALS SCIENCE↗

Influence of the as-built microstructure on the recrystallization of an additively manufactured Inconel939 Ni-based superalloy

This study investigates the influence of the as-built microstructure on the recrystallization (RX) behavior and mechanical properties of the Ni-based superalloy Inconel 939 produced by laser powder bed fusion (PBF-LB/M). Two distinct as-built microstructures were obtained by varying the hatch distance (h d ): a columnar, strongly textured condition (h d =50, termed h d 50) and an equiaxed, weakly textured condition (h d =70, termed h d 70)). Both were subjected to nine solution treatments combining three temperatures (1100, 1150, and 1200 °C) and three holding times (1, 4, and 8 h). Comprehensive microstructural characterization was conducted to assess grain morphology, texture, grain boundary character, dislocation density, and precipitate distribution. Recrystallization was found to be significantly slower than in cast counterparts, requiring higher temperatures and longer times for completion. The initial microstructure plays a decisive role: full RX was achieved only in hd70 specimens after treatment at 1200 °C for 8 h, whereas hd50 samples exhibited delayed and incomplete RX under identical conditions. This behavior is attributed to the finer grain size and higher fraction of high-angle grain boundaries in hd70, which promote recrystallization. Mechanical testing revealed that hd70 samples subjected to a 1200 °C/8 h treatment followed by standard double ageing show higher yield and tensile strengths across the investigated temperature range than both printed and cast Inconel939 processed under conventional conditions, albeit with slightly reduced ductility. The enhanced mechanical performance is attributed to the larger grain size, which limits grain boundary sliding. These results demonstrate the critical importance of controlling the as-built microstructure and tailoring post-processing strategies to optimize high-temperature performance of PBF-LB/M Inconel939.

Inconel939↗