Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

The kinematic convergent-beam electron diffraction method for nanocrystal structure determination

Kinematic convergent-beam electron diffraction KCBED is a technique capable of probing and solving the atomic structure of isolated nanocrystals as small as a few nanometers in diameter. The method was evaluated by solving the structure of a spinel crystal from three-dimensional diffraction data. The charge-flipping algorithm was used for ab initio phasing and SHELX was used for structure refinement. We discuss the relative merits of the KCBED and precession methods for nanocrystallography. © 2009 American Institute of Physics.

36 MATERIALS SCIENCE↗

Preparation of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} for Lithium Batteries Via Solid-State Redox Method using Nitrate and Acetate Based Reactants

LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} is a potential cathode material for 5 V batteries. This material was prepared by the solid-state redox method using nitrate and acetate based reactants. The precursor material was obtained when the mixture reactants was heated at 500 deg. C for 10 hours and calcined at different temperatures in the range between 650 and 950 deg. C for 12 hours. The structures of the synthesized materials were verified with X- ray diffraction (XRD) measurement and Scanning Electron Microscope (SEM). The charge-discharge technique was determined using Solartron 1470. As calcination temperature increases, the well-ordered crystal growth oriented to [1 1 1] direction shows a clear octahedral morphology, which is the characteristic of the typical cubic spinel. The Li/LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} prepared from acetate based reactants calcined at 750 deg. C for 12 h delivered the discharge capacity of 140 mAh/g.

36 MATERIALS SCIENCE↗

High Temperature Decomposition of Almandine and Pyrope in Reducing Atmosphere

Thermal decomposition of two garnets of near end-member composition--almandine (Fe{sub 2.85}Mg{sub 0.15})(Al{sub 1.99})Si{sub 2.99}O{sub 12} and pyrope (Mg{sub 2.22}Fe{sub 0.47}Ca{sub 0.33})(Cr{sub 0.11}Fe{sub 0.06}Al{sub 1.81})Si{sub 2.98}O{sub 12}--has been carried out in reducing atmosphere (forming gas: 10% of H{sub 2} in N{sub 2}). High-temperature behavior of both samples was monitored using simultaneous thermogravimetry and differential scanning calorimetry. The decomposition of almandine and pyrope turned out to proceed at slightly different temperatures above 1000 degree sign C. Therefore, two series of samples were prepared based on the results of thermal analysis: almandine heated up to 950 deg. C, 1070 deg. C and 1200 deg. C, and pyrope heated up to 1000 deg. C, 1100 deg. C, 1125 deg. C and 1200 deg. C. The identification of the decomposition products was performed by X-ray powder diffraction and Moessbauer spectroscopy. The common feature of the decomposition of both garnets is the presence of metallic iron and spinel phase, while the other products include fayalite, cristobalite, and cordierite for almandine; and enstatite and anorthite for pyrope. The formation of this last component was enabled due to Ca content in pyrope.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of NiZn-ferrite thin films prepared by radio frequency magnetron sputtering

Polycrystalline NiZn-ferrite thin films were deposited on Si(100) substrate by rf magnetron sputtering, using targets with a nominal composition of Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}. The effects of substrate condition, sputtering pressure, and postannealing on the structure and magnetic properties of thin films have been investigated. Our results show that the preferred orientation of the NiZn spinel film changed from (311) to (400) with increasing the Ar pressure from 0.8 to 1.6 Pa, meanwhile, the grain size also increased. Atomic force microscopy analysis indicates that perfect surface morphology of the film can be obtained at a relatively lower sputtering pressure of 1.0 Pa. The relative percentage of residual oxygen increases significantly on a condition of lower sputtering pressure, and plays an important role in film structure due to the strong molecular adsorption tendency of oxygen on the film surface during the deposition process. A thin film with a typical thickness of 1 {mu}m, a saturation magnetization of 150 emu/cm{sup 3}, and a coercivity of 8.8 kA/m has been obtained after annealing at 800 deg. C, which has the potential application in magnetic integrated circuits.

36 MATERIALS SCIENCE↗

The effect of MgO(111) interlayer on the interface phase stability and structure of BaFe{sub 12}O{sub 19}/SiC(0001)

We present a study on the effect of an interlayer of thin MgO(111) film on SiC(0001) on the interface phase stability and structure of the BaFe{sub 12}O{sub 19} (BaM). The 10 nm MgO(111) interlayer followed by the BaM film were grown by molecular beam epitaxy on 6H-SiC. Cross-sectional transmission electron microscopy shows the formation of a magnesium ferrite spinel phase at the interface, and after 25 nm, a well structured BaM film was observed. In addition to the two main phases (Mg-ferrite and BaM), a thin layer of SiOx (2-3 nm) is formed at the SiC interface. In spite of the formation of this amorphous layer, the diffraction studies show that the BaM film is epitaxially grown and it has a single crystal structure. The energy dispersive x-ray analysis from the interface region shows that the MgO layer prevents significant outdiffusion of the Si into the film. Total energy calculations by density functional theory were used to investigate the stability of the various phases and to explain the observed interfacial phases in the studied system.

36 MATERIALS SCIENCE↗

Line profile analysis and low temperature AC susceptibility of Cu-Zn ferrites

The Cu{sub 1-x}Zn{sub x}Fe{sub 2}O{sub 4} (x = 0, 0{center_dot}2, 0{center_dot}4, 0{center_dot}6, 0{center_dot}8, 1.0) samples were prepared using double sintering ceramic method by adding Zn{sup 2+} at different concentration. The X-ray line profile analysis were carried out to confirm the spinel phase formation as well as to know the (%) strain in the crystal. The real and imaginary part of a.c. susceptibility measured from 77K to room temperature. The high temperature peak corresponds to magnetic blocking of individual particles, while the low temperature peak is attributed to surface spin-glass freezing. To prove the dynamics of the spin (dis)order in both regimes of freezing and blocking, the frequency dependent ac susceptibility is investigated under a biasing dc field. The frequency shift in the ''frozen'' low-temperature ac susceptibility peak is fitted to a dynamic scaling law which indicates a spin-glass phase. Exchange bias is turned on at low temperature which signifies the existence of a strong core-shell interaction.

36 MATERIALS SCIENCE↗

Processing optimization and sintering time dependent magnetic and optical behaviors of Aurivillius Bi{sub 5}Ti{sub 3}FeO{sub 15} ceramics

Aurivillius Bi{sub 5}Ti{sub 3}FeO{sub 15} (BTF) ceramics were synthesized using the conventional solid state reaction method by optimizing excess of Bi{sub 2}O{sub 3} and sintering time. Their structures, magnetic, and optical properties were investigated in detail. The optimum process to sinter pure Aurivillius BTF ceramics was confirmed to be 3 wt. % excess Bi{sub 2}O{sub 3} to compensate the Bi volatilization at 1050 Degree-Sign C for 240 min (BTF-240M). The microstructure and crystalline structure of the BTF ceramics had little dependence on the sintering time from the x-ray diffraction (XRD) and scanning electron microscopic data. Nevertheless, the magnetic and optical properties were closely related with the sintering time. The overall magnetic behavior of these BTF ceramics was superparamagnetic (SPM), whereas there were unambiguous clues for the existence of antiferromagnetic (AFM) interactions. However, whether the SPM behavior was intrinsic or arised from a tiny amount of spinel Fe{sub 3}O{sub 4} impurity phase cannot be thoroughly ruled out in the XRD detection limit in the present stage. The AFM interactions were weakened upon extending the sintering time. The effective magnetic moment ({mu}{sub eff}), however, demonstrated different dependency on the sintering time. It increased with the sintering time from 80 min to 240 min, and then dropped with further extending the sintering time. Compared with other BTF ceramics, the BTF-240M ceramic showed the highest values of the refractive index n and real part {epsilon}{sub 1}, as well as the lowest ones of the extinction coefficient k and imagine part {epsilon}{sub 2} in whole photon energy range. Finally, a direct inter-band transition was confirmed for these BTF ceramics and optical energy band gaps were determined to be about 3.08, 3.18, and 3.39 eV for 80 min, 150 min, and 240 min sintered BTF ceramics, respectively, yet abnormal optical behavior was observed in BTF-360M ceramic.

36 MATERIALS SCIENCE↗

Reordering between tetrahedral and octahedral sites in ultrathin magnetite films grown on MgO(001)

Magnetite ultrathin films were grown using different deposition rates and substrate temperatures. The structure of these films was studied using (grazing incidence) x-ray diffraction, while their surface structure was characterized by low energy electron diffraction. In addition to that, we performed x-ray photoelectron spectroscopy and magneto optic Kerr effect measurements to probe the stoichiometry of the films as well as their magnetic properties. The diffraction peaks of the inverse spinel structure, which originate exclusively from Fe ions on tetrahedral sites are strongly affected by the preparation conditions, while the octahedral sites remain almost unchanged. With both decreasing deposition rate as well as decreasing substrate temperature, the integrated intensity of the diffraction peaks originating exclusively from Fe on tetrahedral sites is decreasing. We propose that the ions usually occupying tetrahedral sites in magnetite are relocated to octahedral vacancies. Ferrimagnetic behaviour is only observed for well ordered magnetite films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High spin polarization at room temperature in Ge-substituted Fe{sub 3}O{sub 4} epitaxial thin film grown under high oxygen pressure

Epitaxial thin films of room-temperature ferrimagnetic (Fe,Ge){sub 3}O{sub 4} were fabricated using pulsed laser deposition. Films with a single-phase spinel structure were grown under high oxygen pressures (0.01–0.6 Pa). The carrier transport across (Fe,Ge){sub 3}O{sub 4}/Nb:SrTiO{sub 3} interface was studied to estimate the spin polarization of (Fe, Ge){sub 3}O{sub 4}. Current–voltage curves of Fe{sub 2.8}Ge{sub 0.2}O{sub 4}/Nb:SrTiO{sub 3} junction showed rectifying behavior even at 300 K whereas Fe{sub 3}O{sub 4}/Nb:SrTiO{sub 3} junction showed ohmic behavior. Calculations based on a model for a Schottky contact with a ferromagnetic component yielded a spin polarization of 0.50 at 300 K for Fe{sub 2.8}Ge{sub 0.2}O{sub 4}, indicating its potential as a promising spin injector.

36 MATERIALS SCIENCE↗

The Verwey transition in nanostructured magnetite produced by a combination of chimie douce and spark plasma sintering

Magnetite nanoparticles about 10 nm sized were synthesized by the polyol method. Zero-field-cooled (ZFC)-FC measurements showed a blocking temperature ∼170 K and the absence of the Verwey transition. They were subsequently consolidated by spark plasma sintering at 750 °C for 15 min, leading to a high density (92% of the theoretical density), solid body, with grains in the 150 nm range. X-ray diffraction patterns exhibited a spinel single phase with cell parameters corresponding to the magnetite structure. Magnetic measurements showed a decrease of coercivity from 685 Oe (54.5 kA/m) at 118 K to 90 Oe (7.2 kA/m) at 139 K. ZFC measurements at 25 Oe presented a three-fold magnetization increase as temperature increased; a small transition between 116 and 117.5 K, followed by a larger one from 117.6 to 124 K. The first transition can be associated with a complex crystallographic transition and delocalization of Fe{sup 2+}-Fe{sup 3+}, while the second one can be attributed to spin reorientation due to the magnetocrystalline anisotropy constant (K{sub 1}) change of sign as previously observed only in magnetite single crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of cation distribution, electrical, magnetic properties and their correlation in Mn{sub 2-x}Co{sub 2x}Ni{sub 1-x}O{sub 4} films

X-ray photoelectron spectroscopy was performed on Mn{sub 2-x}Co{sub 2x}Ni{sub 1-x}O{sub 4} (x = 0.2, 0.4, 0.5, 0.6, and 0.8) series spinel films to determine their cation distributions. The results show that both Ni and Co ions exhibit bivalence, while Mn ions exhibit coexisting multivalence. The hopping frequency ν{sub 0} of each sample was obtained by combining cation distribution results and electrical measurement data. Analysis of the divergence at Neel temperature between field cooling and zero-field cooling magnetization curves revealed that the ferromagnetic coupling between octahedral site ions first leads to spontaneous magnetization at T{sub C}, after which a second spontaneous magnetization arises from the antiferromagnetic couple between tetrahedral and octahedral sites at a lower temperature T{sub N}. The correlation between hopping conductivity and magnetic transition temperature is discussed. We propose that the strength of the ferromagnetic couple between octahedral sites is subject to the product term of Nc(1 − c)ν{sub 0}, which determines the ferromagnetic transition temperature (T{sub C}) of the system. Our results provide an avenue to understand the origin of magnetic interaction in small-polaron hopping semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric relaxations and alternating current conductivity in manganese substituted cobalt ferrite

Manganese (Mn) substituted cobalt ferrites (CoFe{sub 2-x}Mn{sub x}O{sub 4}, referred to CFMO) have been synthesized by the solid state reaction method and their dielectric properties and ac conductivity have been evaluated as a function of applied frequency and temperature. X-ray diffraction measurements indicate that CFMO crystallize in the inverse cubic spinel phase with a lattice constant ∼8.38 Å. Frequency dependent dielectric measurements at room temperature obey the modified Debye model with relaxation time of 10{sup −4} s and spreading factor of 0.35(±0.05). The frequency (20 Hz–1 MHz) and temperature (T = 300–900 K) dependent dielectric constant analyses indicate that CFMO exhibit two dielectric relaxations at lower frequencies (1–10 kHz), while completely single dielectric relaxation for higher frequencies (100 kHz–1 MHz). The dielectric constant of CFMO is T-independent up to ∼400 K, at which point increasing trend prevails. The dielectric constant increase with T > 400 K is explained through impedance spectroscopy assuming a two-layer model, where low-resistive grains separated from each other by high-resistive grain boundaries. Following this model, the two electrical responses in impedance formalism are attributed to the grain and grain-boundary effects, respectively, which also satisfactorily accounts for the two dielectric relaxations. The capacitance of the bulk of the grain determined from impedance analyses is ∼10 pF, which remains constant with T, while the grain-boundary capacitance increases up to ∼3.5 nF with increasing T. The tan δ (loss tangent)-T also reveals the typical behavior of relaxation losses in CFMO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure, magnetic ordering, and spin filtering efficiency of NiFe{sub 2}O{sub 4}(111) ultrathin films

NiFe{sub 2}O{sub 4}(111) ultrathin films (3–5 nm) have been grown by oxygen-assisted molecular beam epitaxy and integrated as effective spin-filter barriers. Structural and magnetic characterizations have been performed in order to investigate the presence of defects that could limit the spin filtering efficiency. These analyses have revealed the full strain relaxation of the layers with a cationic order in agreement with the inverse spinel structure but also the presence of antiphase boundaries. A spin-polarization up to +25% has been directly measured by the Meservey-Tedrow technique in Pt(111)/NiFe{sub 2}O{sub 4}(111)/γ-Al{sub 2}O{sub 3}(111)/Al tunnel junctions. The unexpected positive sign and relatively small value of the spin-polarization are discussed, in comparison with predictions and previous indirect tunnelling magnetoresistance measurements.

36 MATERIALS SCIENCE↗

Mixed magnetic phases in Co{sub 3}O{sub 4} nanoparticles synthesized by co-precipitation method

In the present manuscript, Co{sub 3}O{sub 4} nanoparticles have been synthesized with the help of co-precipitation method and studied the structural, optical and magnetic properties. X ray diffraction analysis of the synthesized samples reveals the formation of single phase cubic spinel structure with the space group Fd-3m. FESEM and TEM results indicate the formation of nano-sized particles. The optical measurement reveals the two band gaps ∼2.77 and 1.67 eV in the sample. Magnetic measurement shows weak ferromagnetic interaction in Co{sub 3}O{sub 4} along with usual paramagnetic nature at room temperature. However, at low temperatures the sample shows antiferromagnetic interaction. The correlation between the structural and observed magnetic and optical properties of Co{sub 3}O{sub 4} nanoparticles will be described and discussed in this paper.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of Ni substitution on structural and magnetic properties of Zn{sub 0.85−x}Ni{sub x}Mg{sub 0.05}Cu{sub 0.1}Fe{sub 2}O{sub 4} ferrite

Nano-crystalline Zn{sub 0.85−x}Ni{sub x}Mg{sub 0.05}Cu{sub 0.1}Fe{sub 2}O{sub 4}, (x = 0.0, 0.17, 0.34, 0.51, 0.68 and, 0.85), were synthesized by sol gel auto combustion method and, effect of Ni content on structural and magnetic properties is studied by x-ray diffraction (XRD) and, magnetic measurements. XRD confirms the formation of single phase spinel ferrite, with Scherrer's grain diameter ranging between 18.95 nm to 33.85 nm. Experimental and theoretical lattice parameter values suggest that the estimated cation distribution is close to the real distribution. Change in Ni-content leads to variation in cation distribution at site A, B and, migration of Cu{sup 2+} ion from B to A site. Ni{sup 2+} ion remains at both A and B site, but when Zn is fully replaced by Ni, it totally goes to A site. Coercivity and anisotropy constant values respectively ranges' between 251.2 to 372.4 Oe and 0.06 × 10{sup 5} to 0.80 × 10{sup 5} erg/cc. Best magnetization value of 43.7 emu/g was obtained for × = 0.68. Variation of magnetic properties can be understood in terms of observed changes in cation distribution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electromagnetic properties of NiZn ferrite nanoparticles and their polymer composites

The magnetic properties of polycrystalline NiZn ferrite nanoparticles synthesized using a polyol-reduction and coprecipitation reaction methods have been investigated. The effects on magnetization of synthesis approach, chemical composition, processing conditions, and on the size of nanoparticles on magnetization have been investigated. The measured room-temperature magnetization for the as-prepared magnetic nanoparticles (MNP) synthesized via polyol-reduction and coprecipitation is 69 Am{sup 2} kg{sup −1} and 14 Am{sup 2} kg{sup −1}, respectively. X-ray diffraction measurements confirm spinel structure of the particles with an estimated grain size of ∼80 nm obtained from the polyol-reduction and 28 nm obtained from these coprecipitation techniques. Upon calcination under atmospheric conditions at different temperatures between 800 °C and 1000 °C, the magnetization, M, of the coprecipitated MNP increases to 76 Am{sup 2} kg{sup −1} with an estimated grain size of 90 nm. The MNP-polymer nanocomposites made from the synthesized MNP in various loading fraction and high density polyethylene exhibit interesting electromagnetic properties. The measured permeability and permittivity of the magnetic nanoparticle-polymer nanocomposites increases with the loading fractions of the magnetic nanoparticles, suggesting control for impedance matching for antenna applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic and magnetic properties of (1 1 1)-oriented CoCr{sub 2}O{sub 4} epitaxial thin film

We report on the fabrication of high quality (1 1 1)-oriented ferrimagnetic normal spinel CoCr{sub 2}O{sub 4} epitaxial thin films on single crystal Al{sub 2}O{sub 3} substrates. The structural, electronic, and magnetic properties were characterized by in-situ reflection high energy electron diffraction, atomic force microscopy, X-ray diffraction, X-ray photoemission spectroscopy, dc magnetization measurement, and element resolved resonant X-ray magnetic scattering. The comprehensive characterization reveals that no disorder in the cation distribution or multivalency issue is present in the samples. As a result, Kagomé and triangular layers are naturally formed via this specific growth approach. These findings offer a pathway to fabricate two dimensional Kagomé heterostructures with exotic quantum many-body phenomena by means of geometrical design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impedance spectroscopic characterization of gadolinium substituted cobalt ferrite ceramics

Gadolinium (Gd) substituted cobalt ferrites (CoFe{sub 2−x}Gd{sub x}O{sub 4}, referred to CFGO) with variable Gd content (x = 0.0–0.4) have been synthesized by solid state ceramic method. The crystal structure and impedance properties of CFGO compounds have been evaluated. X-ray diffraction measurements indicate that CFGO crystallize in the inverse spinel phase. The CFGO compounds exhibit lattice expansion due to substitution of larger Gd ions into the crystal lattice. Impedance spectroscopy analysis was performed under a wide range of frequency (f = 20 Hz–1 MHz) and temperature (T = 303–573 K). Electrical properties of Gd incorporated Co ferrite ceramics are enhanced compared to pure CoFe{sub 2}O{sub 4} due to the lattice distortion. Impedance spectroscopic analysis illustrates the variation of bulk grain and grain-boundary contributions towards the electrical resistance and capacitance of CFGO materials with temperature. A two-layer heterogeneous model consisting of moderately conducting grain interior (ferrite-phase) regions separated by insulating grain boundaries (resistive-phase) accurately account for the observed temperature and frequency dependent electrical characteristic of CFGO ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗