Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Separation science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Laser-Ranging Transponders for Science Investigations of the Moon and Mars

An active laser was developed ranging in real-time with two terminals, emulating interplanetary distances, and with submillimeter accuracy. In order to overcome the limitations to ranging accuracy from jitters and delay drifts within the transponders, architecture was proposed based on asynchronous paired one-way ranging with local references. A portion of the transmitted light is directed, via a reference path, to the local detector. This allows for compensation of any jitter in the timing of the emitted laser pulse. The same detector is used to measure the time of the received pulses emitted from the remote terminal. This approach removes any change in the delay caused by the detector or its electronics. Two separate terminals using commercial off-the-shelf hardware were built to emulate active laser ranging over interplanetary distances. The communication link for the command to start recording pulse arrival times and data transfer from one terminal to the other was achieved using a standard wireless link, emulating free space laser communication. The deviation is well below the goal of 1-mm precision. This leaves enough margin to achieve 1-mm precision when including the fluctuations due to atmospheric turbulence while ranging to Mars through the Earth s atmosphere. The two terminals are mounted on translation stages, which can be moved freely on rails to yield a wide range of distances with fine adjustment. The two terminals were separated by approximately 16 meters.

Hemmati, Hamid↗
DOE OSTI2020

Visible-Light-Activated Photocatalytic Films toward Self-Cleaning Membranes

Membranes are among the most promising means of delivering increased supplies of fit-for-purpose water, but membrane fouling remains a critical issue restricting their widespread application. Coupling photocatalysis with membrane separation has been proposed as a potentially effective approach to reduce membrane fouling. However, commonly used materials in photocatalysis limit use of low-cost sources such as sunlight due to their large band gaps. There are few examples of in situ photocatalytic self-cleaning of membranes, with removal from the filtration system and ex situ illumination being more common. In this study, a visible-light-activated photocatalytic film prepared by nitrogen doping into the lattice of TiO 2 was deposited on commercial ceramic membranes via atomic layer deposition (ALD). The synergy between membrane separation and redox reactions between organic pollutants and reactive oxygen species (ROS) produced by the visible-light-activated layer offers a possibility for stable and sustainable membrane operation under in situ solar irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Self‐Assembled Membranes for High Ion Selectivity and Proton Blocking in Electrochemical Applications

Anion-exchange membranes (AEMs) with high anion/cation selectivity and exceptional proton-blocking ability are critical for applications such as bipolar membrane electrodialysis and electrochemical acid recovery. However, existing AEMs are constrained by a trade-off between ionic conductivity and selectivity, largely due to the intrinsic coupling between charge density and water content, and they suffer from excessive proton leakage facilitated by the Grotthuss hopping mechanism. In this work, poly(vinylimidazolium) membranes functionalized with long alkyl side chains that self-assemble into well-defined microphase-separated morphologies stabilized by hydrophobic and electrostatic interactions are reported. These unique structures localize the charge density along the polymer backbone to promote fast and selective ion transport. As a result, these membranes exhibit ionic conductivities and counter-ion diffusivities surpassing those of conventional homogeneous membranes, along with unprecedented counter-ion/co-ion selectivity and proton-blocking ability. These results establish a new design paradigm for high-performance, phase separated charged polymer membranes that overcome the limitations of homogeneous membranes, with broad implications for advanced electrochemical technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A new climatology of South American extratropical cyclogenesis with an intercomparison among ERA5 , JRA55 and the Brazilian Navy

Abstract In South America, the most destructive extratropical cyclones occur over the southeastern quadrant of the continent, a region that includes some of the world's largest population centres. However, there are few studies of cyclogenesis in this region, and little is known about how the varying origins of these storms impact subsequent behaviour. By supplementing an observational record with current reanalysis data, this study reveals the general characteristics of cyclones that develop in the lee regions of the Andes and those that develop nearer the Atlantic coast. The comparative climatologies demonstrate that cyclone development in these separate contexts is driven by topography, local atmospheric circulations and basin‐scale climate oscillations. The analysis further reveals a low‐frequency seesaw of lee and coastal cyclogenesis, with cross‐basin ocean temperature differences playing a teleconnectional role.

Meteorology & Atmospheric Sciences↗
DOE OSTI2023

Glassy correlated state induced by disorder in the frustrated antiferromagnet Tb 2 Zr 2 O 7

Here, we study the low-temperature thermomagnetic properties of the polycrystalline material Tb 2 Zr 2 O 7 through ac susceptibility and specific heat measurements. This zirconate displays a defect-fluorite structure in which the magnetic Tb 3+ and nonmagnetic Zr 4+ cations sit randomly on the same metal sublattice. No long-range magnetic order is found down to 100 mK, although dominant antiferromagnetic interactions are observed and the spins remain dynamic down to the lowest temperatures investigated. We observed a frequency-dependent peak around 2.5 K which is well described by many models of a canonical spin-glass transition. In-field specific heat measurements and the recovered entropy of the system R ln(4) suggest a two doublets ground state separated by 7 K. Comparisons to the pyrochlores Tb 2 Ti 2 O 7 and Tb 2 Hf 2 O 7 reinforce the collective spin-glass-type behavior and the opening for discussions of an exotic Coulomb phase in this material.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A study on the creep behavior of alloy 709 using in-situ scanning electron microscopy

In this research, an experimental evaluation of creep properties of Alloy 709 in the temperature range of 750–850 °C was undertaken. Alloy 709 is a novel austenitic stainless steel with 20% Cr and 25% Ni by wt% that was developed for application in structural components of nuclear power plants. Creep rupture tests were conducted in an in-situ heating-loading and Scanning Electron Microscope (SEM) unit equipped with Electron Backscatter Diffraction (EBSD) detector and Energy Dispersive Spectroscopy (EDS). “Real-time” creep damage mechanisms of Alloy 709 at various stresses and temperatures using a flat, un-notched sample with continuously reducing cross-section is studied so that the failure and maximum creep damage occurred at the center of the sample where the in-situ SEM imaging could be focused. Accelerated creep tests at temperatures and stresses above service conditions were performed by employing multiple blocks of constant loads where the loads were increased once the sample attained constant creep rate, indicating a secondary creep regime. This technique ensures multiple data points can be obtained from the same test, saves the time required for an otherwise long-term creep test and usage of SEM. Further, Coincident Site Lattice (CSL) boundary maps were collected as control maps before testing, and the grain boundaries were observed during the creep test to understand the effect of grain boundary character on the creep damage mechanism. Void growth, grain boundary separation, and sliding were found to be the main creep mechanisms whose rate is dependent on stress and temperature. Failure mechanisms studied on the fracture surface using SEM fractography were correlated to the sample surface observations to create complementary information to better understand the underline creep mechanism of Alloy 709.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Natural switches in behaviour rapidly modulate hippocampal coding

Throughout their daily lives, animals and humans often switch between different behaviours. However, neuroscience research typically studies the brain while the animal is performing one behavioural task at a time, and little is known about how brain circuits represent switches between different behaviours. Here we tested this question using an ethological setting: two bats flew together in a long 135 m tunnel, and switched between navigation when flying alone (solo) and collision avoidance as they flew past each other (cross-over). Bats increased their echolocation click rate before each cross-over, indicating attention to the other bat. Hippocampal CA1 neurons represented the bat’s own position when flying alone (place coding). Notably, during cross-overs, neurons switched rapidly to jointly represent the interbat distance by self-position. This neuronal switch was very fast—as fast as 100 ms—which could be revealed owing to the very rapid natural behavioural switch. The neuronal switch correlated with the attention signal, as indexed by echolocation. Interestingly, the different place fields of the same neuron often exhibited very different tuning to interbat distance, creating a complex non-separable coding of position by distance. Theoretical analysis showed that this complex representation yields more efficient coding. Overall, our results suggest that during dynamic natural behaviour, hippocampal neurons can rapidly switch their core computation to represent the relevant behavioural variables, supporting behavioural flexibility.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Holographic wavefront sensors

A brief historical review of the first designs of holographic wavefront sensors (WFS’s) and the concepts lying in their basis is presented. The main directions in the development of these sensors are highlighted and considered. One of these directions implies a two-stage transition from the use of several separate measuring channels with holograms filtering only one Zernike mode: first to the use of one channel with a multiplexed hologram filtering several first Zernike modes, and then to filtering the entire set of Zernike modes with the aid of one combined multiplexed hologram. Another line of research in this field (related to the first one) is the optimisation of the filter hologram structure in order to reduce cross-modulation interferences, increase multiplexing level, etc. One more line of research implements principles of dynamic holography by introducing spatial light modulators into the WFS composition. Hence, the advantages of time multiplexing of holograms can be used. The approach developed by G. Andersen’s team, aimed at adapting the holographic WFS design for operation as an element of adaptive optical system with a zonal corrector, as well as an approach implying development of hybrid holographic sensors, are considered separately. The results of the authors’ studies of holographic WFS’s with application of the methods of Fourier holography (i.e., holography of focused beams, in particular, using diffuse scatterers in a hologram recording channel) are also reported. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Direct recovery of interfacial topography from coherent X-ray reflectivity: model calculations for a 1D interface

The use of coherent X-ray reflectivity to recover interfacial topography is described using model calculations for a one-dimensional interface. The results reveal that the illuminated topography can be recovered directly from the measured reflected intensities. This is achieved through an analysis of the Patterson function, the Fourier transform of the scattering intensity (as a function of lateral momentum transfer, Q // , at fixed vertical momentum transfer, Q z ). Specifically, a second-order Patterson function is defined that reveals the discrete set of separations and contrast factors (i.e., the product of changes in the effective scattering factor) associated with discontinuities in the effective interfacial topography. Finally, it is shown that the topography is significantly over-determined by the measurements, and an algorithm is described that recovers the actual topography through a deterministic sorting of this information.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Strong interlayer interactions in bilayer and trilayer moiré superlattices

Moiré superlattices constructed from transition metal dichalcogenides have demonstrated a series of emergent phenomena, including moiré excitons, flat bands, and correlated insulating states. All of these phenomena depend crucially on the presence of strong moiré potentials, yet the properties of these moiré potentials, and the mechanisms by which they can be generated, remain largely open questions. Here, we use angle-resolved photoemission spectroscopy with submicron spatial resolution to investigate an aligned WS 2 /WSe 2 moiré superlattice and graphene/WS 2 /WSe 2 trilayer heterostructure. Our experiments reveal that the hybridization between moiré bands in WS 2 /WSe 2 exhibits an unusually large momentum dependence, with the splitting between moiré bands at the Γ point more than an order of magnitude larger than that at K point. In addition, we discover that the same WS 2 /WSe 2 superlattice can imprint an unexpectedly large moiré potential on a third, separate layer of graphene (g/WS 2 /WSe 2 ), suggesting new avenues for engineering two-dimensional moiré superlattices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coevolution of the Ess1-CTD axis in polar fungi suggests a role for phase separation in cold tolerance

Most of the world’s biodiversity lives in cold (-2° to 4°C) and hypersaline environments. To understand how cells adapt to such conditions, we isolated two key components of the transcription machinery from fungal species that live in extreme polar environments: the Ess1 prolyl isomerase and its target, the carboxy-terminal domain (CTD) of RNA polymerase II. Polar Ess1 enzymes are conserved and functional in the model yeast, Saccharomyces cerevisiae. By contrast, polar CTDs diverge from the consensus (YSPTSPS) 26 and are not fully functional in S. cerevisiae. These CTDs retain the critical Ess1 Ser-Pro target motifs, but substitutions at Y1, T4, and S7 profoundly affected their ability to undergo phase separation in vitro and localize in vivo. We propose that environmentally tuned phase separation by the CTD and other intrinsically disordered regions plays an adaptive role in cold tolerance by concentrating enzymes and substrates to overcome energetic barriers to metabolic activity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Fusion Materials Semiannual Progress Report for the Period Ending December 31, 2022

This is the seventy-third in a series of semiannual technical progress reports on fusion materials science activity supported by the Fusion Energy Sciences Program of the U.S. Department of Energy. It covers the period ending December 31, 2022. This report focuses on research addressing the effects on materials properties and performance of exposure to the neutronic, thermal and chemical environments anticipated in the chambers of fusion experiments and energy systems. This research is a major element of the national effort to establish the materials knowledge base for an economically and environmentally attractive fusion energy source. Research activities on issues related to the interaction of materials with plasmas are reported separately. The results reported are the products of a national effort involving a number of national laboratories and universities. A large fraction of this work, particularly in relation to fission reactor irradiations, is carried out collaboratively with partners in Japan, Russia, and the European Union. The purpose of this series of reports is to provide a working technical record for the use of program participants, and to provide a means of communicating the efforts of fusion materials scientists to the broader fusion community, both nationally and worldwide. This report has been compiled by Stephanie Melton, Oak Ridge National Laboratory. Her efforts, and the efforts of the many persons who made technical contributions, are gratefully acknowledged.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Fusion Materials Semiannual Progress Report for the Period Ending December 31, 2023

This is the seventy-fifth in a series of semiannual technical progress reports on fusion materials science activity supported by the Fusion Energy Sciences Program of the U.S. Department of Energy. It covers the period ending December 31, 2023. This report focuses on research addressing the effects on materials properties and performance of exposure to the neutronic, thermal and chemical environments anticipated in the chambers of fusion experiments and energy systems. This research is a major element of the national effort to establish the materials knowledge base for an economically and environmentally attractive fusion energy source. Research activities on issues related to the interaction of materials with plasmas are reported separately. The results reported are the products of a national effort involving a number of national laboratories and universities. A large fraction of this work, particularly in relation to fission reactor irradiations, is carried out collaboratively with partners in Japan, Russia, and the European Union. The purpose of this series of reports is to provide a working technical record for the use of program participants, and to provide a means of communicating the efforts of fusion materials scientists to the broader fusion community, both nationally and worldwide.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Methodology for Digital Image Correlation and Infrared Measurement of Melting Aluminum Bars

Ultimately, our experiment measures two quantities on an aluminum bar: motion (which modeling must predict) and temperature (which sets thermal boundary conditions). For motion, stereo DIC is a technique to use imaging data to provide displacements relative to a reference image down to 1/100th of a pixel. We use a calibrated infrared imaging method for accurate temperature measurements. We will be capturing simultaneous data and then registering temperature data in space to the same coordinate system as the displacement data. While we will later show that our experiments are repeatable, indicating that separate experiments for motion and temperature would provide similar data, the simultaneous and registered data removes test to test variability as a source of uncertainty for model calibration and reduces the number of time-consuming tests that must be performed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

“Production of High Specific Activity 155 Tb, 161 Tb and 203 Pb for Research and Clinical Applications: Effective Target Design, Target Material Recycling and Radioisotope Separation”

Radioisotopes are essential for the development and application of radiopharmaceuticals that target specific diseases, such as cancer, offering unique potential for precision medicine. The growing demand for theranostic radioisotopes underscores their critical role in personalized medicine, where they enhance diagnostic imaging, minimize patient radiation exposure, and improve targeted tissue uptake, particularly in receptor- and antigen-directed therapies. The theranostic pair terbium-155 (diagnostic) and terbium-161 (therapeutic) holds significant promise for advancing individualized, targeted, and dosimetry-driven radiotherapies. However, the United States currently lacks routine and reliable production of these isotopes. This project made significant progress toward addressing this supply issue by developing production and separation methods for terbium-155 and terbium-161 while also training the next generation of the nuclear and radiochemistry workforce. This grant also strengthened collaboration between scientists at the University of Washington, the University of Missouri and Brookhaven National Laboratory. The research effort focused on evaluating target preparation methods, optimizing irradiation parameters, and refining isolation processes. In addition, the project provided extensive hands-on training to graduate students and postdoctoral fellows, equipping them with expertise in radioisotope production technologies and fostering the growth of the nuclear science workforce.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

SPRUCE Photosynthesis and Respiration of Picea mariana and Larix laricina in SPRUCE Experimental Plots, 2016-2017

This dataset contains empirical physiological, morphological, and chemical data collected on two dominant conifer species, Picea mariana and Larix laricina, between May 2016 and August 2017 at the SPRUCE (Spruce and Peatland Responses Under Changing Environments) experimental site within the Marcell Experimental Forest in northern Minnesota, USA. Analyses assessed the response of conifers to whole-ecosystem warming and elevated atmospheric carbon dioxide (CO2) concentrations. Measurements include light-saturated net photosynthesis and dark respiration at ambient atmospheric carbon dioxide (CO2) concentration (2016), CO2 response curves of light-saturated net photosynthesis (2017), leaf morphology (leaf mass per unit leaf area) and nitrogen content (on both mass and area basis). Leaf photosynthesis and respiration were measured with portable photosynthesis systems (LI6400XT, LI6800, LI-COR Biosciences, USA). In 2016, photosynthesis and respiration were measured at a common temperature of 25 ˚C to assess thermal acclimation, and at growth temperatures (for each of the five treatment temperatures) to assess field performance. In 2017, CO2 response curves of net photosynthesis (so-called A-Ci curves) were conducted at different leaf temperatures (15, 25, 32.5, 40 and 45 ˚C) for assessment of biochemical parameters and their temperature sensitivity. In addition, dark respiration measurements at different leaf temperatures (10, 15, 20, 25, 30, 35, 40, and 45 ºC) were also taken. This dataset contains one data file in comma-separate values (*.csv) and Microsoft Excel (*.xlsx) format. Additional metadata are provided: a data dictionary and a file-level metadata file in comma-separate values (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Azimuthal Anchoring Strength in Photopatterned Alignment of a Nematic

Spatially-varying director fields have become an important part of research and development in liquid crystals. Characterization of the anchoring strength associated with a spatially-varying director is difficult, since the methods developed for a uniform alignment are seldom applicable. Here we characterize the strength of azimuthal surface anchoring produced by the photoalignment technique based on plasmonic metamsaks. The measurements used photopatterned arrays of topological point defects of strength +1 and −1 in thin layers of a nematic liquid crystal. The integer-strength defects split into pairs of half-integer defects with lower elastic energy. The separation distance between the split pair is limited by the azimuthal surface anchoring, which allows one to determine the strength of the latter. The strength of the azimuthal anchoring is proportional to the UV exposure time during the photoalignment of the azobenzene layer.

36 MATERIALS SCIENCE↗
NASA NTRS1989

The soft x ray telescope for Solar-A

The Solar-A satellite being prepared by the Institute for Sapce and Astronautical Sciences (ISAS) in Japan is dedicated to high energy observations of solar flares. The Soft X Ray Telescope (SXT) is being prepared to provide filtered images in the 2 to 60 A interval. The flight model is now undergoing tests in the 1000 foot tunnel at MSFC. Launch will be in September 1991. Earlier resolution and efficiency tests on the grazing incidence mirror have established its performance in soft x rays. The one-piece, two mirror grazing incidence telescope is supported in a strain free mount separated from the focal plane assembly by a carbon-epoxy metering tube whose windings and filler are chosen to minimize thermal and hygroscopic effects. The CCD detector images both the x ray and the concentric visible light aspect telescope. Optical filters provide images at 4308 and 4700 A. The SXT will be capable of producing over 8000 of the smallest partial frame images per day, or fewer but larger images, up to 1024 x 1024 pixel images. Image sequence with two or more of the five x ray analysis filters, with automatic exposure compensation to optimize the charge collection by the CCD detector, will be used to provide plasma diagnostics. Calculations using a differential emission measure code were used to optimize filter selection over the range of emission measure variations and to avoid redundancy, but the filters were chosen primarily to give ratios that are monotonic in plasma temperature.

Brown, W. A.↗