Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sample Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Globular cluster populations: Results including S{sup 4}G late-type galaxies

Using 3.6 and 4.5 μm images of 73 late-type, edge-on galaxies from the S{sup 4}G survey, we compare the richness of the globular cluster populations of these galaxies to those of early-type galaxies that we measured previously. In general, the galaxies presented here fill in the distribution for galaxies with lower stellar mass, M{sub *}, specifically log(M{sub ∗}/M{sub ⊙})<10, overlap the results for early-type galaxies of similar masses, and, by doing so, strengthen the case for a dependence of the number of globular clusters per 10{sup 9}M{sub ⊙} of galaxy stellar mass, T{sub N}, on M{sub *}. For 8.5<log(M{sub ∗}/M{sub ⊙})<10.5 we find the relationship can be satisfactorily described as T{sub N}=(M{sub ∗}/10{sup 6.7}){sup −0.56} when M{sub *} is expressed in solar masses. The functional form of the relationship is only weakly constrained, and extrapolation outside this range is not advised. Our late-type galaxies, in contrast to our early types, do not show the tendency for low-mass galaxies to split into two T{sub N} families. Using these results and a galaxy stellar mass function from the literature, we calculate that, in a volume-limited, local universe sample, clusters are most likely to be found around fairly massive galaxies (M{sub *} ∼ 10{sup 10.8}M{sub ⊙}) and present a fitting function for the volume number density of clusters as a function of parent-galaxy stellar mass. We find no correlation between T{sub N} and large-scale environment, but we do find a tendency for galaxies of fixed M{sub *} to have larger T{sub N} if they have converted a larger proportion of their baryons into stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Detecting Long-period Variability in the SDSS Stripe 82 Standards Catalog

We report the results of a search for long-period (100 < P < 600 days) periodic variability in the SDSS Stripe 82 standards catalog. The SDSS coverage of Stripe 82 enables such a search because there are on average 20 observations per band in ugriz bands for about one million sources, collected over about 6 yr, with a faint limit of r ~ 22 mag and precisely calibrated 1%–2% photometry. We calculated the periods of variable source candidates in this sample using the Lomb–Scargle periodogram and considered the three highest periodogram peaks in each of the gri filters as relevant. Only those sources with gri periods consistent within 0.1% were later studied. We use the Kuiper statistic to ensure uniform distribution of data points in phased light curves. We present five sources with the spectra consistent with quasar spectra and plausible periodic variability. This SDSS-based search bodes well for future sensitive large-area surveys, such as the Rubin Observatory Legacy Survey of Space and Time, which, due to its larger sky coverage (about a factor of 60) and improved sensitivity (~2 mag), will be more powerful for finding such sources.

79 ASTRONOMY AND ASTROPHYSICS↗

Back Trajectories during SAIL

This data set contains air mass back trajectories generated during the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign using the Hybrid Single-Particle Lagrangian Integrated Trajectory model (HYSPLIT, Stein et al. 2015, Rolph et al. 2017). For each hour from January 1, 2021 to June 30, 2023, a 96-hour back trajectory was initiated at the SAIL sampling site, starting 100 m above ground level. The calculations used the GDAS meteorological data set with model vertical velocity. The files within this dataset show location and meteorological parameters of the back trajectory analysis. There are 21 columns within each data file. The first 2 columns pertain to back trajectory parameters: the trajectory number (which is always 1) and the meteorological grid number. The next 9 columns pertain to spatiotemporal information: the year, month, day, hour (0-23), and minute of the trajectory, the previous time of the trajectory (in negative hours), and the airmass location (latitude, longitude, and height in m AGL). The rest of the parameters within each file pertains to surface and meteorological characteristics of the airmass: pressure (in hPa), potential temperature (in K), temperature (in K), precipitation rate (in mm/hr), mixing depth (in m), relative humidity (in % relative to liquid water), specific humidity (in g/kg), H2O mixing ratio (in g/kg), underlying terrain height (in meters above sea level), and incoming radiation (in W/m^2).

back trajectory↗

Fast Fourier Transform Spectral Analysis Program

Fast Fourier Transform Spectral Analysis Program is used in frequency spectrum analysis of postflight, space vehicle telemetered trajectory data. This computer program with a digital algorithm can calculate power spectrum rms amplitudes and cross spectrum of sampled parameters at even time increments.

Daniel, J. A., Jr.↗

Cosmogenic radionuclides in the Allende and Murchison carbonaceous chondrites.

Measurements were made of Na-22, Al-26, Mn-54, and Co-60 produced by cosmic rays in five samples of the Allende C3 meteorite and in one specimen of Murchison (C2); Sc-46, V-48, Cr-51, and Co-57 were also measured in several of these samples. Comparison of observed Allende Co-60 activities with calculated neutron-capture production rates yields a depth scale for Allende that appears unambiguous to about 30-cm depth. Using this scale, the production of Al-26 is constant to a depth in excess of 30 cm, Na-22 activity increases 30% from near the surface of Allende to 20- to 30-cm depth, and Mn-54 production increases 50% over the same depth range.

Cressy, P. J., Jr.↗

Calculation of metric coefficients for streamline coordinates.

A procedure is given for deriving the equations describing the surface streamline metric in a general form and in a form suitable for incorporation into computer codes to calculate an inviscid flow about three-dimensional bodies. Sample results are included to show the application of the metric in conjunction with an axisymmetric analog to predict heat transfer to a typical space shuttle orbiter.

Rakich, J. V.↗

Soil and surface temperatures at the Viking landing sites

The annual temperature range for the Martian surface at the Viking lander sites is computed on the basis of thermal parameters derived from observations made with the infrared thermal mappers. The Viking lander 1 (VL1) site has small annual variations in temperature, whereas the Viking lander 2 (VL2) site has large annual changes. With the Viking lander images used to estimate the rock component of the thermal emission, the daily temperature behavior of the soil alone is computed over the range of depths accessible to the lander; when the VL1 and VL2 sites were sampled, the daily temperature ranges at the top of the soil were 183 to 263 K and 183 to 268 K, respectively. The diurnal variation decreases with depth with an exponential scale of about 5 centimeters. The maximum temperature of the soil sampled from beneath rocks at the VL2 site is calculated to be 230 K. These temperature calculations should provide a reference for study of the active chemistry reported for the Martian soil.

Kieffer, H. H.↗

Fuel economy and exhaust emissions characteristics of diesel vehicles: Test results of a prototype Fiat 131 NA 2.4 liter automobile

The vehicle was tested on a chassis dynamometer over selected drive cycles and steady-state conditions. Two fuels were used, a U.S. no. 2 diesel and a European diesel fuel. The vehicle was tested with retarded timing and with and without an oxidation catalyst. Particulate emission rates were calculated from dilution tunnel measurements and large volume particulate samples were collected for biological and chemical analysis. It was determined that while the catalyst was generally effective in reducing hydrocarbon and carbon monoxide levels, it was also a factor in increasing particulate emissions. Increased particulate emission rates were particularly evident when the vehicle was operated on the European fuel which has a high sulfur content.

Quayle, S. S.↗

Fuel economy and exhaust emissions characteristics of diesel vehicles: Test results of a prototype fiat 131TC 2.4 liter automobile

The results obtained from fuel economy and emission tests conducted on a prototype Fiat 131 turbocharged diesel vehicle are presented. The vehicle was tested on a chassis dynamometer over selected drive cycles and steady-state conditions. Two fuels were used, a United States number 2 diesel and a European diesel fuel. Particulate emission rates were calculated from dilution tunnel measurements and large volume particulate samples were collected for biological and chemical analysis. It was determined that turbocharging accompanied by complementary modifications results in small but substantial improvements in regulated emissions, fuel economy, and performance. Notably, particulate levels were reduced by 30 percent.

Quayle, S. S.↗

Display for Mining-Machine Operators

Electronic display unit provides operator of longwall shearer with information needed to control machine. Unit samples sensors on shearer. Using sensor signals, executes mathematical calculations, performs decisionmaking routines and displays results to operator. Unit also logs data for later analysis.

Paulson, P.↗

Fuel economy and exhaust emissions characteristics of diesel vehicles: Test results of a prototype Chrysler Volare, 225 CID (3.7-liter) automobile

The results obtained from fuel economy and emission tests conducted on a prototype Chrysler Volare diesel vehicle are documented. The vehicle was tested on a chassis dynamometer over selected drive cycles and steady-state conditions. The fuel used, was a DOE/BETC referee fuel. Particulate emission rates were calculated from dilution tunnel measurements and large volume particulate samples were collected for biological and chemical analysis. The vehicle obtained 32.7 mpg for the FTP urban cycle and 48.8 mpg for the highway cycle. The emissions rates were 0.42/1.58/1.17/0.28 g/mile of HC, CO, NOx and particulates respectively.

Walter, R. A.↗

Global distribution of SAGE II data products

Techniques employed to map the global distribution of stratospheric aerosols using SAGE II data at four wavelengths (385, 453, 525 and 1020 microns) are described. The methods were devised to integrate the 900 data points scanned by the instrument with account taken of the different times the vertical profiles were obtained. The data have been used to calculate the O3, H2O, NO2 and aerosol optical thicknesses. Sample details of data gathered during April 1985 are discussed, with emphasis on difficulties being encountered in analyzing the differences being observed in the dawn and dusk data.

Rind, D.↗

Recursive form of the eigensystem realization algorithm for system identification

An algorithm is developed for recursively calculating the minimum realization of a linear system from sampled impulse response data. The Gram-Schmidt orthonormalization technique is used to generate an orthonormal basis for factorization of the data matrix. The system matrix thus identified is in upper Hessenberg form, which has advantages for the identification of modal parameters including damping coefficients, frequencies, mode shapes, and modal participation factors. It also has the property that once an element of the system matrix is computed, it is never altered as the dimension of the model is increased in the recursive process. Numerical examples are presented for comparison of the recursive and nonrecursive forms of the eigensystem realization algorithm.

Longman, Richard W.↗

Galactic neutron stars and gamma-ray bursts

The association of the gamma-ray burst phenomenon with Galactic neutron stars is investigated statistically, and the distance to presently observable gamma-ray bursts is constrained. This is done by calculating the spatial distribution and kinematic properties of a sample of Population I neutron stars and comparing their properties to those of observed gamma-ray bursts. Both brightness distribution and angular distribution on the celestial sphere are employed. Current observations suggest negligible correlation on small angular scales, large-scale isotropy, and a radial distribution that is approximately uniform to the distances currently observed. It is concluded that the distribution of Population I neutron stars is consistent with current observations if gamma-ray bursts occur continuously throughout the neutron star lifetime and if the current sampling depth is at least about 150 pc but not more than roughly 2 kpc.

Hartmann, Dieter↗

Eddy current sensing of intermetallic composite consolidation

A finite element method is used to explore the feasibility and optimization of a probe-type eddy current sensor for determining the thickness of plate specimens during a hot isostatic pressing cycle. The dependence of the sensor's impedance upon sample-sensor separation in the high frequency limit is calculated, and factors that maximize sensitivity to the final stages of densification are identified.

Dharmasena, Kumar P.↗

Microwave reflectometer ionization sensor

The development of the Microwave Reflectometer Ionization Sensor (MRIS) Instrument for use on the Aeroassist Flight Experiment (AFE) spacecraft is described. The instrument contract was terminated, due to cancellation of the AFE program, subsequent to testing of an engineering development model. The MRIS, a four-frequency reflectometer, was designed for the detection and location of critical electron density levels in spacecraft reentry plasmas. The instrument would sample the relative magnitude and phase of reflected signals at discrete frequency steps across 4 GHz bandwidths centered at four frequencies: 20, 44, 95, and 140 GHz. The sampled data would be stored for later processing to calculate the distance from the spacecraft surface to the critical electron densities versus time. Four stepped PM CW transmitter receivers were located behind the thermal protection system of the spacecraft with horn antennas radiating and receiving through an insulating tile. Techniques were developed to deal with interference, including multiple reflections and resonance effects, resulting from the antenna configuration and operating environment.

Seals, Joseph↗

Line profiles variations from atmospheric eclipses: Constraints on the wind structure in Wolf-Rayet stars

Binary systems in which one of the components has a stellar wind may present a phenomenon known as 'wind' or 'atmospheric eclipse', in which that wind occults the luminous disk of the companion. The enhanced absorption profile, relative to the spectrum at uneclipsed orbital phases, can be be modeled to yield constraints on the spatial structure of the eclipsing wind. A new, very efficient approach to the radiative transfer problem, which makes no requirements with respect to monotonicity of the velocity gradient or size of that gradient, is presented. The technique recovers both the comoving frame calculation and the Sobolev approximation in the appropiate limits. Sample computer simulations of the line profile variations induced by wind eclipses are presented. It is shown that the location of the wind absorption features in frequency is a diagnostic tool for identifying the size of the wind acceleration region. Comparison of the model profile variations with the observed variations in the Wolf-Rayet (W-R)+6 binary system V444 Cyg illustrate how the method can be used to derive information on the structure of the wind of the W-R star constrain the size of the W-R core radius.

Auer, L. H.↗

Latitudinal distribution of black carbon soot in the upper troposphere and lower stratosphere

Black carbon soot from the upper troposphere and lower stratosphere has been systematically collected at latitudes from 90 deg N to 45 deg S. The measured latitudinal distribution of this soot at 10 to 11 km altitude is found to covary with commercial air traffic fuel use, suggesting that aircraft fuel combustion at altitude is the principal source. In addition, at latitudes where the commercial air traffic is high, measured black carbon soot values are high even at 20 km altitude, suggesting that aircraft-generated soot injected just above the tropopause may be transported to higher altitudes. During the volcanically influenced period in which these samples were collected, the number abundances, total mass, and calculated total surface area of black carbon soot are 2-3 orders of magnitude lower than similar measures of sulfuric acid aerosol. During volcanically quiescent periods, the calculated total surface area of black carbon soot aerosol is of the same order of magnitude as that of the background sulfuric acid aerosol. It appears from this comparison that black carbon soot is only capable of influencing lower stratosphere or upper troposphere chemistry during periods when the aerosol budget is not dominated by volcanic activity. It remains to determine the extent to which black carbon soot particles act as nuclei for sulfuric acid aerosol formation. However, mass balance calculations suggest that aircraft soot injected at altitude does not represent a significant source of condensation nuclei for sulfuric acid aerosols.

Blake, David F.↗