Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Highly Reducing Partitioning Experiments Relevant to the Planet Mercury

With the data returned from the MErcury Surface Space ENvironment GEochemistry and Ranging (MESSENGER) mission, there are now numerous constraints on the physical and chemical properties of Mercury, including its surface composition. The high S and low FeO contents observed from MESSENGER on the planet's surface suggests a low oxygen fugacity of the present planetary materials. Estimates of the oxygen fugacity for Mercurian magmas are approximately 3-7 log units below the Iron-Wüstite (Fe-FeO) oxygen buffer, several orders of magnitude more reducing than other terrestrial bodies we have data from such as the Earth, Moon, or Mars. Most of our understanding of elemental partitioning behavior comes from observations made on terrestrial rocks, but Mercury's oxygen fugacity is far outside the conditions of those samples. With limited oxygen available, lithophile elements may instead exhibit chalcophile, halophile, or siderophile behaviors. Furthermore, very few natural samples of rocks that formed under reducing conditions are available in our collections (e.g., enstatite chondrites, achondrites, aubrites). With this limited amount of material, we must perform experiments to determine the elemental partitioning behavior of typically lithophile elements as a function of decreasing oxygen fugacity. Experiments are being conducted at 4 GPa in an 880-ton multi-anvil press, at temperatures up to 1850degC. The composition of starting materials for the experiments were selected for the final run products to contain metal, silicate melt, and sulfide melt phases. Oxygen fugacity is controlled in the experiments by adding silicon metal to the samples, using the Si-SiO2 oxygen buffer, which is approximately 5 log units more reducing than the Fe-FeO oxygen buffer at our temperatures of interest. The target silicate melt compositional is diopside (CaMgSi2O6) because measured surface compositions indicate partial melting of a pyroxene-rich mantle. Elements detected on Mercury's surface by MESSENGER (K, Na, Fe, Ti, Cl, Al, Cr, Mn, U, Th) and other geochemically relevant elements (P, F, H, N, C, Co, Ni, Mo, Ce, Nd, Sm, Eu, Gd, Dy, Yb) are added to the starting composition at trace abundances (approximately 500 ppm) so that they are close enough to infinite dilution to follow Henry's law of trace elements, and their partitioning behavior can be measured between the metal, silicate, and sulfide phases. The results of these experiments will allow us to assess the thermal and magmatic evolution of the planet Mercury from a geochemical standpoint.

Rowland, Rick, II↗

A New Look at Aubrites: Investigating 3D Modal Mineralogy with X-Ray Computed Tomography

The aubrites (approximately 30 known meteorites) are a unique group of differentiated meteorites that formed on asteroids with oxygen fugacities (ƒO2) from approximately 2 to approximately 6 log units below the iron-wustite buffer. At these highly reduced conditions, elements deviate from the geochemical behavior exhibited at terrestrial ƒO2, forming FeO-poor silicates and exotic sulfides. While previous studies have described the petrology and 2D modal abundances of aubrites, this work investigates the 3D modal mineralogies of silicate, metal, and sulfide phases in aubrite samples, which are then compared to the available 2D data. In addition to 3D modal mineralogies, we have examined the geochemistry of fourteen aubrites, including mineral major-element compositions, bulk-rock compositions, and oxygen isotopic compositions to understand their formation and evolution at extreme ƒO2 conditions. We utilize X-ray computed tomography (XCT) to non-destructively analyze the distribution and abundances of mineral phases in aubrites and locate composite clasts of sulfide grains for future analytical study. In order to better constrain elemental behavior under reduced conditions, we specifically target minerals phases that comprise moderately volatile elements (i.e. oldhamite [CaS], caswellsilverite [NaCrS2] and djerfisherite [K6Na(Fe,Cu,Ni)25S26Cl]) as it has been shown that their geochemical behavior changes as a function of ƒO2. Currently, we have produced 3D scans of the Norton County aubrite. The results of the XCT data have allowed for the determination of the abundances of silicate groundmass (i.e., enstatite, forsterite, albite, and diopside), light (based on electron density) sulfides (i.e. alabandite [MnS] and daubréelite [FeCr2S4]), heavy (based on electron density) sulfides (i.e., troilite [FeS]), and Fe,Ni metal by segmenting a density histogram in Volume Graphics Studio software. XCT scans of additional aubrites are underway. By combining the 3D representation of the exotic phases found in aubrites with existing 2D characterizations, we are able to better determine modal abundances. By integrating 3D and 2D modal abundances and geochemistry, we can ultimately better constrain aubrite petrogenesis and elemental partitioning under reduced conditions. Furthermore, application of this new 3D approach offers the opportunity to identify and select clasts for future study prior to cutting the sample, which will minimize sample loss of this precious material.

Wilbur, Zoe↗

Hot Rocks! Near-Infrared Reflectances (and Emissivities) or Rocks at Venus Surface Temperatures

Venus’ surface can be viewed in emission through a few near-infrared (NIR) spectral ‘windows’ (1 µm) in its relatively opaque atmosphere [1]. Venus’ surface shows NIR emissivities that correlate with surface geology [2-4], and these emissivity variations are interpreted as differences in surface rock type (mafic vs. silicic) and/or extent of weathering (Fe2+ silicates vs. Fe3+-oxide-coated). To understand and quantify the observed variations in NIR emissivity, high-temperature (T) emissivity can be measured directly [5,6]. For example, emissivities of basalts in the wavelength range 0.85 – 1.2 µm are ~0.95 [5-8]. This can be tested by measureing reflectance, because Kirchoff’s Law holds that emissivity (e) = 1 – reflectance (r). The r of basalt in the NIR is ~0.05 [o] consistent with a NIR e of ~0.95 [5-8]. High-T NIR e’s of silicic igneous rocks (granitic, rhyolite) have been reported to be 0.8-0.9 [5,6], which is inconsistent with r values of 0.3-0.8 of such rocks at 25°C [9,10]. However, these measurements have been updated [7,8] and are consistent with the results here (see below and Fig. 3).

Treiman, A. H.↗

PRESOLAR GRAIN ABUNDANCE VARIATION IN THE MILLER RANGE 090019 CO3.1 CHONDRITE

Presolar grains condensed in the outflows of evolved red giant stars and the ejecta of supernovae (SNe) and novae. These grains have greatly anomalous isotopic compositions compared to solar system material, reflecting their stellar origins [1]. They have been identified in primitive meteorites, interplanetary dust particles (IDPs), Antarctic micrometeorites, and comet Wild 2 samples returned by NASA’s Stardust mission. Presolar silicates are one of the most abundant presolar phases and their concentrations extend up to 1.5% in primitive IDPs believed to derive from comets [2]. These grains are highly susceptible to alteration and destruction by secondary processing in the interstellar medium, nebula, and asteroid or comet parent body. Presolarsilicate abundance variations between primitive meteorites and chemical and mineralogical studies provide indications of the extent of secondary hydrothermal alteration [3, 4]. The abundance of presolar SiC grains is generally consistent among chondrites, but lower abundances in some meteorites have been attributed to thermal alteration [5, 6]. Presolar grain abundance variations attributed to localized alteration have also been reported within different regions of a chondrite [e.g., 7].Carbonaceous chondrites from the CO and CR groups have the highest abundances of presolar silicates among meteorites, attesting to their primitive nature. The CO3 chondrite Dominion Range (DOM) 08006 has the highest presolar O-rich grain abundance of ~260 ppm [8, 9]. MillerRange (MIL) 090019 is classified as a CO3.1 chondrite and has affinities to Acfer 094, DOM 08004/6 and Allan Hills (ALH) 77307. These chondrites have high presolar silicate abundances and contain high abundances of various types of refractory inclusions. We previously conducted detailed studies of CAIs in MIL 090019 [10, 11]. Here we evaluate its presolar grain inventory to assess the degree of parent body alteration and compare to other chondrites

A. N. Nguyen↗

Mid-Infrared Spectra of Comets P/Borrelly, P/Faye, and P/Schaumasse

A 10 micrometer silicate emission feature has been discovered in the spectra of comets P/Borrelly and P/Faye at R of roughly 1.5 AU although this feature was not observed in P/Schaumasse. A model is presented to show how the shape of the silicate feature can depend on the way in which silicate and absorbing material are mixed in the grains.

comets↗

Apatite Nanoresponse to Acidic Dissolution

Phosphorus uptake by plants and organisms is one of the most important life-sustaining processes occurring in the critical zone (CZ). Because 95% of Earth’s reserves is relatively immobile in the form of apatite, plants and organisms rely on molecular scale solubilization process to extract available P. As the world experiences a global P shortage, influencing food production, it becomes increasingly important to understand apatite dissolution. The detailed study of chemically weathered apatite surfaces at the μm to nm-scale is key to understanding P solubilization and uptake in the CZ, allowing for better crop management and efficient fertilization. Apatite weathering is generally viewed in terms of a pH-dependent process where protons weaken atomic bonds, this leading to the disintegration of the apatite structure. A general feature of apatite weathering in acid and near neutral pH conditions is an apparent non-stoichiometric dissolution characterized by [Ca/P]aq > 1.66 in both fluorapatites (FAP) and hydroxyapatites (HAP). This process leads to the formation of a surface altered layer (SAL) with a different composition from the bulk, which many have argued is a Ca-depleted “leached layer.” We investigated apatite weathering at the nanoscale using FIB-prepared TEM-foils. Our preliminary results based on laboratory-altered FAP at ambient T and pH 3 show the formation of amorphous SALs with a maximum thickness of ~10 nm. High resolution chemical mapping and profiling using STEM-EELS and STEM-EDXS indicate that the SALs are generally, but not always, depleted in Ca and enriched in P. These results provide an alternate view of the mechanism of apatite dissolution with stoichiometric breakdown of the apatite structure, followed by the reprecipitation of an amorphous surface layer depleted in Ca. This mechanism can be described in terms of coupled interfacial dissolution-reprecipitation (CIDR), which is increasingly viewed as a universal mechanism of silicate mineral and glass dissolution. Our observation that apatite may dissolve similarly to silicates implies not only that apatite weathering may be more complex than originally thought, but also that the CIDR mechanism may extend beyond silicates.

mineralogy↗

Compositional Study of Trans-Neptunian Objects at λ > 2.2 μm

Using data from the Infrared Array Camera on the Spitzer Space Telescope, we present photometric observations of a sample of 100 trans-Neptunian objects (TNOs) beyond 2.2 μm. These observations, collected with two broadband filters centered at 3.6 and 4.5 μm, were done in order to study the surface composition of TNOs, which are too faint to obtain spectroscopic measurements. With this aim, we have developed a method for the identification of different materials that are found on the surfaces of TNOs. In our sample, we detected objects with colors that are consistent with the presence of small amounts of water, and we were able to distinguish between surfaces that are predominantly composed of complex organics and amorphous silicates. We found that 86% of our sample have characteristics that are consistent with a certain amount of water ice, and the most common composition (73% of the objects) is a mixture of water ice, amorphous silicates, and complex organics. Twenty-three percent of our sample may include other ices, such as carbon monoxide, carbon dioxide, methane, or methanol. Additionally, only small objects seem to have surfaces dominated by silicates. This method is a unique tool for the identification of complex organics and to obtain the surface composition of extremely faint objects. Furthermore, this method will be beneficial when using the James Webb Space Telescope for differentiating groups within the trans-Neptunian population.

Trans-Neptunian objects↗

The Lithophile Element Budget of Earth’s Core

The relative composition of Earth’s core and mantle were set during core formation. By determining how elements partition between metal and silicate at high pressures and temperatures, measurements of the mantle composition and geophysical observations of the core can be used to understand the mechanisms by which Earth formed. Here we present the results of metal–silicate partitioning experiments for a range of nominally lithophile elements (Al, Ca, K, Mg, O, S, Si, Th, U) and S to 85 GPa and up to 5400 K. With our results and a compilation of literature data, we developed a parameterization for partitioning that accounts for compositional dependencies in both the metal and silicate phases. Using this parameterization in a range of planetary growth models, we find that, in general, lithophile element partitioning into the metallic phase is enhanced at high temperatures. The relative abundances of FeO, SiO2 and MgO in the mantle vary significantly between planetary growth models, and the mantle abundances of these elements can be used to provide important constraints on Earth’s accretion. To match Earth’s core mass and mantle composition, Earth’s building blocks must have been enriched in Fe and depleted in Si compared with CI chondrites. Finally, too little Mg, Si and O are partitioned into the core for precipitation of oxides to be a major source of energy for the geodynamo. In contrast, several ppb of U can be partitioned into the core at high temperatures, and this energy source must be accounted for in thermal evolution models.

dynamo↗

Tin-Essako 001: A Metal-Rich Ureilite?

Introduction: Metal-rich achondrites include a variety of types, and likely have a variety of origins. Models range from gravitational mixing at the core-mantle boundaries of differentatiated asteroids, to complex impact mixing scenarios. We describe a new type of metal-rich achondrite that might be the first metal-rich ureilite. Sample: Tin-Essako (TE) 001 (~4.3 g) was found in Mali in 2020 and purchased by Jay Piatek in 2021. It was classified as a metal-rich ungrouped achondrite, with olivine and oxygen isotope (d18O=8.2810‰, d17O=3.718‰, avg. 3) compositions suggesting affinity to ureilites [1]. We studied one polished section (~187.7 mm2) of TE 001. Petrography: TE 001 consists of ~60% metal and 40% silicates, heterogeneously distributed. The metal is largely fresh, but iron oxides (presumably terrestrial) occur along one edge and in some patches and veins in the interior. The silicates are dominantly olivine (≥90%), with melt-textured areas of plagioclase + Si-rich glass. Minor phases include chromite and carbon. Olivine occurs as rounded grains (up to ~2.5 mm) in metal, commonly with rims of melt-textured plagioclase + glass. Olivine also occurs in more massive areas having a “honeycomb” texture, with rounded olivine “cells” surrounded by an interstitial network of reduced olivine riddled with tiny metal grains, plus melt-textured plagioclase + Si-rich glass. Chromite occurs as subhedral to rounded grains; smaller grains (30-250 mm) are included in olivine and a few larger grains (400-500 mm) are isolated within metal. A carbon phase occurs as lacy-textured rims around olivine grains in metal, or small patches within metal. Mineral Compositions: The olivine (excluding interstitial areas) is Fo 73.9±0.5, with 0.25±0.02 wt.% CaO, 0.31±0.01 wt% Cr2O3, 0.01 wt.% NiO, and molar Fe/Mn=49.8±2.2 (53 analyses). Olivine in interstitial areas has Fo up to at least 91. Smaller chromite grains have Fe# (molar Fe/[Fe+Mg]) = 0.54±0.01, Cr# (molar Cr/[Cr+Al]) = 0.52±0.01, 0.52±0.02 wt.% V2O3 and 0.21±0.04 wt% ZnO (28 analyses). One larger grain is zoned from Fe# = 0.45, Cr# =0.52 to Fe# = 0.40, Cr# =0.57, and contains thin Al-rich lamellae not resolved by EMPA. One irregularly shaped patch of chromite included in olivine has Fe# =0.26 and contains no ZnO. Plagioclase laths are An ~53-60, with ≤0.01 wt.% K2O. Glass contains 75-76 wt% SiO2 and ~16 wt% Al2O3. The metal contains 5.2±0.2 wt% Ni, 0.46±0.02 wt.% Co, and 0.01±0.01 wt.% Cr, with Si and P below detection (168 analyses). Discussion: The olivine + chromite assemblage in TE 001 is similar to the most ferroan ureilites (Fo ~75-79 [2]), as are the oxygen isotopes [1]. The presence of a carbon phase supports this, although the identity of this phase (graphite as in ureilites?) remains to be determined. The “honeycomb” textured areas, in particular, the presence of olivine “reduction rims,” resemble shock-smelted olivine areas in ureilites [3], but interstitial melt-textured plagioclase laths + glass like those in TE 001 have not been reported in such (or any) ureilites. Olivine in TE 001 is marginally more ferroan than in the most FeO-rich ureilite, with Fe-Mg-Mn composition offset from the trend of olivine + low-Ca pyroxene ureilites similar to augite-bearing ureilites [4]. CaO and Cr2O3 contents are in the range of those in ureilite olivine [ ] , though Cr2O3 is at the extreme low end of the range [5]. Chromites (except the unusual one) have similar Fe# to the most ferroan primary chromites in ureilites [2], but distinctly lower Cr# (0.52 vs. 0.71). Metal compositions are with the range for metal in ureilites [7]. The absence of pyroxene and sulfide, and the high abundance of metal in TE 001, are unlike ureilites. One possibility is that a ferroan, chromite-bearing, pyroxene-poor ureilite was invaded (possibly due to impact) by a metallic liquid (low S content suggests very high temperature), resulting in complete melting of pyroxene and smelting of olivine, with rapid recrystallization of melted silicate as plagioclase + glass. Alternatively, a pre-existing metal-rich ureilite assemblage may have been impact melted. Additional types of data will be obtained to evaluate these hypotheses (i.e., is the metal indigenous?) and assess affinity to ureilites.

olivine↗

IIAB IRON METEORITES: FORMATION AND RELATION TO OTHER METEORITE GROUPS.

The IIAB iron meteorites are one of the largest iron meteorite groups that formed by fractional crystallization [1]. Iron meteorites formed over a range of oxygen fugacities (fO2)[2], most formed relatively reduced at~ IW–4to –2.5 (IABs), where IW= iron-wüstite buffer, to relatively oxidized at IW–1(IVBs) [2,3]. While the IIABs contain reduced mineral phases (daubré elite [1]),the fO2for IIABs is poorly constrained. The fO2of iron meteorites may have become more reducing during cooling, with oxidized phases (i.e., chromite) forming at higher temperatures and daubré elite forming at lower temperatures [4]. The O-and Cr-isotope compositions of silicates and chromite in meteorites, including iron meteorites, can determine potential genetic links to other meteorite sand con-strain if a meteorite is from the non-carbonaceous (NC) or carbonaceous (CC) group [e.g., 5–8]. Iron meteorite groups have been identified as being in the NCor CC group using Mo[9]and Ni [10] isotope compositions of their metallic component. Numerous iron meteorites contain minor amounts of silicates and oxides [e.g., 11], but most have not been analyzed for their Cr or Ti isotope compositions, with some exceptions (e.g., IIIABs [6,7],a IIG, and a IIAB[7]). We analyzed the compositions of silicates and chromite in six IIAB iron meteorites to investigate the relationship between IIABs and known meteorite groups, the fO2of IIABs, and the origin of chromite in the IIABs. *full abstract in document

Meteorite↗

Microstructural Characterization of Felsite Fragments From the Apollo Next Generation Sample Analysis (ANGSA) Double Drive Tube 73001/73002

While the Moon’s surface is dominated by mafic igneous products formed through the crystallization of the lunar magma ocean, and the subsequent eruption of mare basalts – felsic magmatic fragments (variably referred to as felsites, granites, rhyolites or granophyres) have been identified from a number of Apollo samples (e.g. 12013[1], 14321[2], 15405[3] and 73215[4]). Magmatic edifices like the Gruithuisen Domes – silicic constructs sometimes found proximal to the basaltic mare provinces filling nearside basins, may represent a petrogenetic origin. However, this is, is complicated by the fact that they apparently predate mare volcanism (e.g. [5]). Additionally, crater-counting indicates that these silicic surface features also postdate radiogenic ages of Apollo felsites [6]. Various modes of felsic magmatism have been invoked to explain the presence of felsic lithologies on the Moon, including: 1) fractional crystallization and silicate liquid immiscibility; 2) partial melting of lunar crust through basaltic underplating; and 3) fractional crystallization of the mare parent magmas. Although these models are plausible, based on known Apollo samples and lunar meteorites, they are complicated by the lack of sample lithologies with intermediate composition between basaltic magmas and the felsic components, and the fact that partial melting of many crustal rock types on the Moon (e.g., anorthosite, troctolites) are unlikely to form granites. Along with other unique magmatic lithologies, new felsites have been identified within the < 1 mm size fractions of the ANGSA double drive core tube (73001/73002) from Apollo 17 station 3, sampling the light mantle landslide deposit from the South Massif [7]. These additional examples of lunar felsite will help us to better constrain the processes that lead to the formation of these evolved lithologies. To do this, we have employed a gambit of high-resolution scanning electron microscopy (SEM) and scanning transmission electron microscopy (TEM) analytical techniques, including electron backscatter diffraction (EBSD), cathodoluminescence and high-angle annular dark field (HAADF) imaging. These data provide unique insights into the felsite mineralogy and microstructures including the coexistence of quartz and tridymite in many of the fragments. In addition, these analyses provide petrological context and assist targeted in situ secondary ion mass spectrometry (SIMS) measurements of the U-Pb systematics of accessory minerals, and the volatile abundances and D/H ratios of apatite grains identified within the clasts.

lunar↗

Accretion of the earliest inner Solar System planetesimals beyond the water snowline

How and where the first generation of inner Solar System planetesimals formed remains poorly understood. Potential formation regions are the silicate condensation line and water snowline of the solar protoplanetary disk. Whether the chemical compositions of these planetesimals align with accretion at the silicate condensation line (water-free and reduced) or water snowline (water-bearing and oxidized) is, however, unknown. Here we use the Fe/Ni and Fe/Co ratios of magmatic iron meteorites to quantify the oxidation states of the earliest planetesimals associated with non-carbonaceous (NC) and carbonaceous (CC) reservoirs, representing the inner and outer Solar System, respectively. Our results show that the earliest NC planetesimals contained substantial amounts of oxidized Fe in their mantles (3–19 wt% FeO). In turn, we argue that this required the accretion of water-bearing materials into these NC planetesimals. The presence of substantial quantities of moderately and highly volatile elements in their parent cores is also inconsistent with their accretion at the silicate condensation line and favours, instead, their formation at or beyond the water snowline. Similar oxidation states in the early formed parent bodies of NC iron meteorites and those of NC achondrites and chondrites with diverse accretion ages suggest that the formation of oxidized planetesimals from water-bearing materials was widespread in the early history of the inner Solar System.

Damanveer S. Grewal↗

Degradation of dome cutting minerals in Hanford waste

At the Hanford Tank Farms, recent changes in retrieval technology require cutting new risers in several single-shell tanks. The Hanford Tank Farm Operator is using water jet technology with abrasive silicate minerals such as garnet or olivine to cut through the concrete and rebar dome. The abrasiveness of these minerals, which become part of the high-level waste stream, may enhance the erosion of waste processing equipment. However, garnet and olivine are not thermodynamically stable in Hanford waste, slowly degrading over time. How likely these materials are to dissolve completely in the waste before the waste is processed in the Waste Treatment and Immobilization Plant can be evaluated using theoretical analysis for olivine and collected direct experimental evidence for garnet. Based on an extensive literature study, a large number of primary silicates decompose into sodalite and cancrinite when exposed to Hanford waste. Given sufficient time, the sodalite also degrades into cancrinite. Even though cancrinite has not been directly added to any Hanford tanks during process times, it is the most common silicate observed in current Hanford waste. By analogy, olivine and garnet are expected to ultimately also decompose into cancrinite. Garnet used in a concrete cutting demonstration was immersed in a simulated supernate representing the estimated composition of the liquid retrieving waste from Hanford tank 241-C-107 at both ambient and elevated temperatures. This simulant was amended with extra NaOH to determine if adding caustic would help enhance the degradation rate of garnet. The results showed that the garnet degradation rate was highest at the highest NaOH concentration and temperature. At the end of 12 weeks, however, the garnet grains were mostly intact, even when immersed in 2 molar NaOH at 80 deg C. Cancrinite was identified as the degradation product on the surface of the garnet grains. In the case of olivine, the rate of degradation in the high-pH regimes of a waste tank is expected to depend on two main parameters: carbonate is expected to slow olivine degradation rates, whereas hydroxide is expected to enhance olivine dissolution rates. Which of these two competing dissolution drivers will have a larger impact on the dissolution rate in the specific environment of a waste tank is currently not identifiable. In general, cancrinite is much smaller and less hard than either olivine or garnet, so would be expected to be less erosive to processing equipment. Complete degradation of either garnet or olivine prior to being processed at the Waste Treatment and Immobilization Plant cannot be confirmed, however.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Environmental barrier coating

The present invention relates generally to a multi-layered article suitable for service in severe environments. The article may be formed of a substrate, such as silicon carbide and/or silicon nitride. The substrate may have a first layer of a mixture of a rare earth silicate and Cordierite. The substrate may also have a second layer of a rare earth silicate or a mixture of a rare earth silicate and cordierite.

36 MATERIALS SCIENCE↗

Experimental studies of reactivity and transformations of rocks and minerals in water-bearing supercritical CO2

Geologic storage of carbon dioxide is a promising strategy for reducing CO2 concentrations in the atmosphere. In this process, silicate minerals in the host rock can react to permanently trap CO2 as precipitated carbonates. In addition, expandable clays in caprocks can swell or shrink and impact the integrity of the caprock seal. While the reactivity of minerals in CO2-rich aqueous fluids has been well studied, much less is known about mineral transformations in supercritical CO2 (scCO2) containing dissolved water. This chapter focuses on experimental investigations of mineral reactivity and transformations in variably hydrated scCO2. We summarize research regarding reservoir rocks, including carbonates, sandstone, granite, basalt, and peridotite. We also cover studies on several mineral systems, including phyllosilicate (montmorillonite), olivine (forsterite), serpentine (antigorite), pyroxene (enstatite), and feldspars (albite, anorthite, and microcline). For expandable phyllosilicate clay minerals, it is shown that volume changes are induced by both H2O and CO2 intercalation. For metal silicate minerals, a common observation is the adsorption of ångstroms- to nanometers-thick H2O films, which facilitate mineral dissolution, ion transport, and nucleation of metal carbonate precipitates. Many silicates exhibit a threshold concentration of adsorbed H2O, before which carbonation is limited to possibly amorphous phase precipitation or surface complexation, but beyond which carbonation is continuous and crystalline carbonates can form.

Loring, John S.↗

Controlled microwave assisted synthesis of functionalized silica nanoparticles

A functionalized fiber. The functionalized fiber includes a fiber strand and silica nanoparticles at least partially encapsulating the fiber strand. The silica nanoparticles are synthesized by hydrolyzing a tetramethyl orthosilicate in hydrochloric acid to form silicic acid monomers. The silicic acid monomers are diluted in acetone and irradiated for a time that is less than 90 seconds with an energy source configured to generate microwave frequency energy to polymerize the silicic acid monomers into the silica nanoparticles.

Owens, John G.↗

Synthesis and spectral characteristics of Sr{sub 2}Y{sub 8}(SiO{sub 4}){sub 6}O{sub 2}: Eu polycrystals

Spectral-luminescent characteristics of Sr{sub 2}Y{sub 8}(SiO{sub 4}){sub 6}O{sub 2}: Eu powder crystal phosphor with the apatite structure and high-intensity luminescence of Eu{sup 3+} ions have been studied. The charge state of europium in the samples has been characterized by means of X-ray L{sub 3}-adsorption spectroscopy. It was established that Eu{sup 3+} forms two types of optical centers. Besides, luminescence of Eu{sup 2+}ions was found. Reduction Eu{sup 3+}{yields}Eu{sup 2+} was considered, which may be due to V{sub Sr}{sup ||} vacancy formation in the 4f crystal lattice position and to negative charge transfer by this vacancy to two Eu{sub Y}{sup 3+} ions. Thus, in the silicate lattice there exist inhomogeneously distributed oxygen-deficient centers, which are responsible for nonradiative transfer of excitation energy to Eu{sup 3+} and Eu{sup 2+} ions. To study electron-vibrational interactions in the crystal phosphor samples, their IR and Raman spectra were examined. In the luminescence spectrum of Eu{sup 2+}, a series of low-intensity bands caused by interaction of the 4f{sup 6}5d state of Eu{sup 2+} with silicate lattice vibrations was observed. - Graphical abstract: The scheme of nonradiative transfer over of energy of excitation from oxygen vacancies to ions Eu{sup 2+} and Eu{sup 3+} in Sr{sub 2}Y{sub 8}(SiO{sub 4}){sub 6}O{sub 2}: Eu phosphors. Research Highlights: {yields}In Sr{sub 2}Y{sub 8}(SiO{sub 4}){sub 6}O{sub 2}:Eu phosphors optical centers Eu{sup 2+} and Eu{sup 3+} (two types) are formed. {yields}The 4f{sup 6}5d state of Eu{sup 2+} interacts with the lattice vibrations of Sr{sub 2}Y{sub 8}(SiO{sub 4}){sub 6}O{sub 2}:Eu. {yields}In crystal lattice Sr{sub 2}Y{sub 8} (SiO{sub 4})6O{sub 2}:Eu oxygen vacancies are formed. {yields}Oxygen vacancies nonradiatively transfer the energy of excitation to Eu{sup 2+} and Eu{sup 3+} ions. {yields}Oxygen vacancies are non-uniformly distributed in a phosphorus lattice.

36 MATERIALS SCIENCE↗

The influence of humic acid and colloidal silica on the sorption of U(VI) onto SRS Sediments Collected from the F/H Area - 15499

Between 1955 and 1988, the F/H Area Seepage Basins located in the center of SRS received approximately 6,814,000 m{sup 3} of acidic waste solutions containing radionuclides and dissolved metals. Uranium (VI) is a key contaminant of concern in groundwater associated with the basins. The pump-and-treat water treatment unit designed and built in 1997 to remove metals and radionuclides eventually became less effective, prompting research for new remedial alternatives. The pump-and-treat system was discontinued in 2004, replaced with a funnel-and-gate system in which base solutions are injected at the gates to raise pH. To take advantage of the potential formation of uranium silicate minerals, Florida International University - Applied Research Center (FIU-ARC), in collaboration with Savannah River National Laboratory (SRNL), is conducting an investigation into a base containing sodium silicate to evaluate whether these solutions have sufficient alkalinity to correct the acidic nature of the aquifer sediments. The research was extended to investigate if U(VI) is bound to colloidal silica and if any synergy exists between humic acid (HA) and colloidal Si that would influence the removal of uranium. Humic substances (HS) are a major component of soil organic matter and are known for their abilities to influence the migration behavior and fate of heavy metals. Studies showed that HA function as an important ion exchange and metal-complexing ligand, carrying a large number of functional groups with high complexing capacity that can greatly affect the mobility behavior of actinides in natural systems. The study investigates if there are any synergistic interactions between U(VI) ions, humic acid and colloidal silica under oxidized conditions and studies the influence of HA and Si on the sorption of U(VI) onto sediments collected from the F/H Area. The experiments also evaluated the effects of different environmental variables such as pH, presence of U(VI) and varying concentrations of HA on the sorption behavior of U(VI) in multi-component batch systems in the pH range between 3 and 8. Several background sediment samples were collected at SRS from archived cores obtained during installation of the well FSB 91C and used for preparation of triplicate samples. The experimental matrix was set up as follows: - Batch 1: Si (3.5 mM) + U (VI) (0.5 ppm) (no sediments and no HA); - Batch 2: Si (3.5 mM) + U (VI) (0.5 ppm) + HA (10 ppm) (no sediments); - Batch 3: U (VI) (0.5 ppm) + HA (10 ppm) (no Si and no sediments); - Batch 4: Sediments + Si (3.5 mM) + U (VI) (0.5 ppm) (no HA); - Batch 5: Sediments + Si (3.5 mM) + U (VI) (0.5 ppm) + HA; - Batch 6: Sediments + U (VI) (0.5 ppm) + HA, (no Si); - Batch 7: Sediments + U (VI) (0.5 ppm) (no Si and no HA). All samples were prepared in triplicate 50-mL conical tubes. All control and experimental tubes were vortexed and kept on a shaker for 24 h at 100 rpm and room temperature. Results showed that the sediment-bearing batches typically exceeded the performance of non-sediment batches. Results showed that the sorption of U(VI) onto sediments was influenced by the pH and the presence of HA. At low pH 3, the addition of HA slightly enhances U(VI) sorption compared to the HA-free samples. This result is consistent with other studies; in the acidic pH range, the addition of HA slightly enhances U(VI) sorption relative to the HA-free system. Conversely, in the pH range of 4 to 7, the sorption of U(VI) on Si was reduced in the presence of HA in comparison to the system without HA. In subsequent experiments the concentration of HA will be increased to 50 ppm. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗