SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Monitor improves complex network reliability in computer data links and command transmission lines. System evaluates circuit performance against preselected criteria, identifies and stores data indicating out-of-tolerance conditions, conducts closed loop testing, and provides for operation under command of digital computer that determines restoration priorities.
High vacuum centrifugal molecular distillation system rapidly reclaims contaminated diffusion pump oil in continuous operation and restores it to high level of purity.
Memory and display device uses cathodochromic material to store visual information and fast phosphor to recall information for display and electronic processing. Cathodochromic material changes color when bombarded with electrons, and is restored to its original color when exposed to light of appropiate wavelength.
Water addition to the Gemini 3 exhaust plasma was studied to determine its effectiveness in the establishment of communication links during the entry portion of the flight. Attenuation levels were measured with and without water injection at uhf frequencies of 230.4 and 296.8 megahertz and at the C-band frequency of 5690 megahertz. Ultrahigh frequency signals that had been blacked out were restored to significant levels, during early portions of the water-injection sequence, by the high flow rate injection. The C-band signal was enhanced by medium and high flow rate injections during the latter portion of the injection period. The uhf signal recovered during water injection resulted in an antenna pattern that was beamed in the radial direction of injection from the spacecraft. Postflight analysis showed that the uhf recovery data were consistent with injection-penetration theory.
Before a magnetospheric substorm and during its early phases the magnetic field magnitude in the geomagnetic tail increases and field lines in the nighttime hemisphere assume a more tail-like configuration. Before the substorm onset a minimum amount of magnetic flux is observed to cross the neutral sheet which means that the neutral sheet currents attain their most earthward locations and their greatest current densities. This configuration apparently results from an increased transport of magnetic flux to the tail caused by a southward interplanetary magnetic field. The field begins relaxing toward a more dipolar configuration at the time of a substorm onset with the recovery probably occurring first between 6 and 10 R sub E. This recovery must be associated with magnetospheric convection which restores magnetic flux to the dayside hemisphere. Field aligned currents appear to be required to connect magnetospheric currents to the auroral electrojets, implying that a net current flows in a limited range of longitudes. Space measurements supporting current systems are limited. More evidence exists for the occurrence of double current sheets which do not involve net current at a given longitude.
The restoration of images focused on a photosensitive surface is treated from the standpoint of maximum likelihood estimation, taking into account the Poisson distributions of the observed data, which are the numbers of photoelectrons from various elements of the surface. A detector of an image focused on such a surface utilizes a certain linear combination of those numbers as the optimum detection statistic. Methods for calculating the false alarm and detection probabilities are proposed. It is shown that measuring noncommuting observables in an ideal quantum receiver cannot yield a lower Bayes cost than that attainable by a system measuring only commuting observables.
The main purpose of this program was to determine the life characteristics of nine space-qualified, metal-ceramic CO2 lasers. Lifetimes ranged between about 400 hours to over 2000 hours (the limit of testing) with a high degree of consistency in like groups. In all cases the tubes which had failed could be restored to near their original power by doubling the cathode current for 30 minutes. Periodic rejuvenation allowed operation for the full 2000 hours on all tubes. The failure mechanism appears to involve formation of NiO and C on the nickel cathode emission surface with subsequent absorption of tube gases.
The role of crystal morphology in the retraction of oriented, linear polyethylene was studied utilizing samples crystallized under conditions controlled to vary, separately, lamellar crystal thickness and density. Samples were oriented in a simple shear deformation to a strain of 4.0 prior to measuring retraction tendency in creep and relaxation type tests. Characterizations of specimens were made using wide and small angle X-ray techniques. The specific morphological variations were chosen to test the hypothesis that a long range elastic restoring force can originate in conjunction with deformation of lamellar crystals and the consequent increase in lamellar crystal surface area and surface free energy. The results support this hypothesis.
The involvement of the President with technology, directly and indirectly, and the best way in which his responsibilities can be discharged are discussed. Technology assessment is considered essential at all levels of the Executive agencies, but the capacity of the agencies for assessment is limited and needs to be supplemented within the Executive Branch. Complete centralization of technological assessment is felt to be ineffective. The role of the Executive Office in initiating proposals for Presidential action and sustaining links with Congress are outlined, and the apparatus for technology assessment is described, emphasizing the Office of Science and Technology. A significant area of technology assessment for the Executive Office is the field of environmental quality, and the duties of the Environmental Quality Council are summarized. It is suggested that it may be more effective to set up a separate organization for the restoration and protection of the environment and to define the task in terms of what is to be protected rather than in terms of technology.
The objectives and scope of the Chesapeake Bay study are discussed. The physical, chemical, biological, political, and social phenomena of concern to the Chesapeake Bay area are included in the study. The construction of a model of the bay which will provide a means of accurately studying the interaction of the ecological factors is described. The application of the study by management organizations for development, enhancement, conservation, preservation, and restoration of the resources is examined.
The objective was to determine whether the reflectance of the degraded plasmo-clay thermal control coating could be restored by exposing it to an oxygen plasma. An experiment was conducted to determine whether bulk radiation damage would be removed by a reabsorption of oxygen ions into the pigment crystal lattice. Results show that the oxygen plasma treatment can eliminate some of the lunar environment-induced degradation on the plasmo-clay coating. Visual observations of the lunar soil on the surface after plasma treatment indicated that it was still highly absorbent to light. Therefore, part of the residual discoloration could be due to lunar soil.
An analysis of the principles of strapdown inertial platforms is presented, and the advantages of the strapdown system as compared to other stabilized systems are discussed. The application of the rebalance loop to continuously restore the position of sensor output axes is described. The attitude logarithms and the rebalance electronics which are required for accurate navigation are examined.
The role of measurements of noncommuting quantum observables is considered in the detection of signals and estimation of signal parameters by quantum receivers. The restoration of images focused on a photosensitive surface is discussed for data as numbers of photoelectrons ejected from various parts of the surface. The detection of an image formed on a photosensitive surface in the presence of background illumination for similar data is also considered.
The amount of quantization noise generated in a digital-to-analog converter is dependent on the number of bits or quantization levels used to digitize the analog signal in the analog-to-digital converter. The minimum number of quantization levels and the minimum sample rate were derived for a digital voice channel. A sample rate of 6000 samples per second and lowpass filters with a 3 db cutoff of 2400 Hz are required for 100 percent sentence intelligibility. Consonant sounds are the first speech components to be degraded by quantization noise. A compression amplifier can be used to increase the weighting of the consonant sound amplitudes in the analog-to-digital converter. An expansion network must be installed at the output of the digital-to-analog converter to restore the original weighting of the consonant sounds. This technique results in 100 percent sentence intelligibility for a sample rate of 5000 samples per second, eight quantization levels, and lowpass filters with a 3 db cutoff of 2000 Hz.
Bend angles for columbium-base alloys, WC3015 and Cb752, at temperatures between -300 F and +500 F are reported. WC3015 exhibited a bend transition temperature well below -100 F, but was severely embrittled by silicide coatings. Cb 752 exhibited a bend transition temperature below -300 F, and the silicide coating application did not influence bend angle of the substrate. However, coating failure on both alloys was observed at less than 60 deg bend, even at 500 F. The effect of electron beam welding and gas tungsten-arc welding on the properties of WC3015 and Cb752 are also reported. Both techniques are shown to produce a marked reduction in the bend angle of WC3015. Unlike WC3015, ductility is restored in Cb752 after a suitable postweld anneal. Microstructural and hardness tests results for both alloys are reported and discussed.
The model investigated involves a cylindrically symmetric blast wave generated by an infinitely long line explosion in a cold and homogeneous gas rotating rigidly in its self-gravitational field. It is found that within the context of rotation in a gravitational field a blast wave will not adopt the one-zone form familiar from similarity solutions but, rather, a two-zone form. The inner compression zone arises as a response to the presence of the restoring force, which drives a rarefaction wave into the outer compression zone.
The role of crystal morphology in the retraction of oriented linear polyethylene was studied utilizing samples crystallized under conditions controlled to vary, separately, lamellar crystal thickness and density. Samples were oriented in a simple shear deformation to a strain of 4.0 prior to measuring retraction tendency in creep- and relaxation-type tests. Characterizations of specimens were made using wide- and small-angle x-ray techniques. The specific morphological variations were chosen to test the hypothesis that a long-range elastic restoring force can originate in conjunction with deformation of lamellar crystals and the consequent increase in lamellar crystal surface area and surface free energy. The results support this hypothesis.
Measurement of the reduction in centrifugation tolerance after two weeks of bedrest with moderate daily exercise, with an attempt to determine if rehydration improves +Gz tolerance. There were significant reductions in +Gz tolerance during bedrest periods at three acceleration levels. Rehydration resulted in a significant increase in tolerance at 2.1G but it did not restore tolerance to control levels. Rehydration did not affect tolerance at 3.2G and 3.8G.