Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Research Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Topical Report – Findings on Subtask 2.7 – Wet ESP and Aerosol Testing at Coal Creek Station

Growing concerns over the impact of CO 2 emissions from combustion sources on global climate change have prompted numerous research and development projects aimed at developing cost-effective technologies for CO 2 capture. One family of technologies being demonstrated at pilot and full scale globally is postcombustion carbon capture (PCCC) systems that employ amine-based solvents. The captured CO 2 can be compressed and permanently stored underground or used for enhanced oil recovery. The proximity of North Dakota’s lignite-fired fleet of power plants to potential CO 2 storage options creates a unique atmosphere for PCCC within the state. However, the unique components present in lignite flue gas present a challenge for large-scale PCCC at North Dakota power plants by contributing to aerosol formation. Aerosols can negatively impact the long-term performance of amine-based solvents for CO 2 capture. Amine-based solvents are volatile, and flue gas particulate provides nucleation sites where amine vapors can condense as aerosols. Because aerosols cannot be easily captured at the column outlet using conventional technologies, the amine-laden aerosols escape the system and lead to accelerated solvent losses. Moreover, particulate components can chemically react with amines to form degradation products that can permanently deactivate the amine, cause fouling, and lead to hazardous emissions. Many of the elements that have been shown to catalyze solvent degradation are present in lignite coals and can exacerbate solvent replacement economics. Understanding this issue is critical to the implementation of solvent-based CO 2 capture systems as applied to lignite-fired generation systems. The Energy & Environmental Research Center (EERC) designed and carried out this project to fully characterize aerosol behavior with various control technologies installed to better optimize aerosol mitigation technology for CO 2 capture. To meet the goal of this project, the following objectives were identified: Determine the effectiveness of a wet electrostatic precipitator (WESP) on mitigating formation of problematic aerosols at Great River Energy’s Coal Creek Station, upstream of the PCCC system. Determine the effectiveness of the Mitsubishi Heavy Industries (MHI) proprietary amine emission reduction unit (AERU) as a postcapture solvent recovery system for reducing aerosol emissions and extending solvent life downstream of the PCCC system. Determine the impact of aerosols on the efficiency and degradation products of both commercial and advanced solvents within the PCCC system. Work was conducted at Coal Creek Station Unit 1 using a slipstream of flue gas from the outlet of the plant’s flue gas desulfurization (FGD) unit. Flue gas was routed through a pilot-scale FGD unit to remove SO 2 to very low levels (~1 ppm) and then through a direct contact cooler (DCC) to further cool the gas and to remove moisture. The gas exiting the DCC was then optionally routed through a WESP before passing to the CO 2 absorber columns. The MHI solvent was used to scrub CO 2 from the slipstream through a set of two absorber columns. The rich solvent was regenerated in a stripper column by heating to drive off captured CO 2 . Flue gas exiting the absorber column was routed to MHI’s proprietary AERU to recover entrained solvent. The system operated using a catch-and-release method where the CO 2 was separated to provide data on the process, but the captured CO 2 was released back into the host site stack. Particulate was measured, collected, and analyzed from multiple locations throughout the pilot-scale system. Unlike the performance observed in prior work, the inlet FGD and DCC did not remove significant particulate matter from the flue gas. This appears to be due to a difference in the nature of the particulate. The DCC seemed to increase particulate size and count, most likely owing to water condensing onto the surfaces of fly ash particles. When the WESP was operated, it achieved >95% particulate capture. Very little particulate matter or indications of solvent were detected at the AERU outlet. When operating with advanced KS 21 solvent, the particulate material at the AERU outlet was even further decreased. Solvent analysis showed that some species derived from flue gas and ash were slowly concentrating in the solvent over the duration of the test. The levels observed were reported to be within expected ranges and were not of concern to MHI. A high-level techno-economic assessment of installing CO 2 capture at Coal Creek Station suggested that, when using a standard monoethanolamine (MEA)-based solution with simple heat integration, the energy penalty to net generation would be 34%. The bulk of this was due to steam losses for regenerating solvent, followed by parasitic electrical demand for CO 2 compression and then by increased parasitic load for pushing flue gas through the absorber column. These demands could be decreased with a more advanced solvent that exhibits lower heat of regeneration and lower pressure drop than does a simple MEA solution. Further energy could be saved with more thorough heat integration to recover useful energy from the steam used for solvent regeneration. Installing a WESP was predicted to increase the cost of electricity by nearly $5/MWh. This would become cost-effective if solvent losses were roughly 10 times the baseline estimate when not using a WESP but could be returned to baseline by installing the WESP. Piping CO 2 for storage in more favorable geology could help with carbon capture and storage economics. Although storing off-site would necessitate construction of a CO 2 transport pipeline, the cost of this pipeline might be more than offset by reducing the number of wells required, the depths of the wells required, and the electrical demand for the CO 2 compressor. Additional factors that favor off-site storage costs include smaller expected CO 2 plume sizes, which translates to less monitoring and fewer landowner agreements. More detailed assessment of the specific geology in the region under and around Coal Creek Station would be needed to accurately assess the costs and benefits of different storage site options. This subtask was cofunded through the Energy & Environmental Research Center–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by the North Dakota Industrial Commission.

Strege, Joshua↗
NASA NTRS1991

Systems engineering studies of on-orbit assembly operation

While the practice of construction has a long history, the underlying theory of construction is relatively young. Very little has been documented as to techniques of logistic support, construction planning, construction scheduling, construction testing, and inspection. The lack of 'systems approaches' to construction processes is certainly one of the most serious roadblocks to the construction of space structures. System engineering research efforts at CSC are aimed at developing concepts and tools which contribute to a systems theory of space construction. The research is also aimed at providing means for trade-offs of design parameters for other research areas in CSC. Systems engineering activity at CSC has divided space construction into the areas of orbital assembly, lunar base construction, interplanetary transport vehicle construction, and Mars base construction. A brief summary of recent results is given. Several models for 'launch-on-time' were developed. Launch-on-time is a critical concept to the assembly of such Earth-orbiting structures as the Space Station Freedom, and to planetary orbiters such as the Mars transfer vehicle. CSC has developed a launch vehicle selection model which uses linear programming to find optimal combinations of launch vehicles of various sizes (Atlas, Titan, Shuttles, HLLV's) to support SEI missions. Recently, the Center developed a cost trade-off model for studying on orbit assembly logistics. With this model it was determined that the most effective size of the HLLV would be in the range of 120 to 200 metric tons to LEO, which is consistent with the choices of General Stafford's Synthesis Group Report. A second-generation Dynamic Construction Activities Model ('DYCAM') process model has been under development, based on our past results in interruptability and our initial DYCAM model. This second-generation model is built on the paradigm of knowledge-based expert systems. It is aimed at providing answers to two questions: (1) what are some necessary or sufficient conditions for judging conceptual designs of spacecraft?, and (2) can a methodology be formulated such that these conditions may be used to provide computer-aided tools for evaluating conceptual designs and planning for space assembly sequences? Early simulation results indicate that the DYCAM model has a clear ability to emulate and simulate human orbital construction processes.

Morgenthaler, George W.↗
DOE OSTI2024

Unveiling the nanoscale architectures and dynamics of protein assembly with in situ atomic force microscopy

Proteins play a vital role in different biological processes by forming complexes through precise folding with exclusive inter- and intra-molecular interactions. Understanding the structural and regulatory mechanisms underlying protein complex formation provides insights into biophysical processes. Furthermore, the principle of protein assembly gives guidelines for new biomimetic materials with potential applications in medicine, energy, and nanotechnology. Atomic force microscopy (AFM) is a powerful tool for investigating protein assembly and interactions across spatial scales (single molecules to cells) and temporal scales (milliseconds to days). It has significantly contributed to understanding nanoscale architectures, inter- and intra-molecular interactions, and regulatory elements that determine protein structures, assemblies, and functions. This review describes recent advancements in elucidating protein assemblies with in situ AFM. We discuss the structures, diffusions, interactions, and assembly dynamics of proteins captured by conventional and high-speed AFM in near-native environments and recent AFM developments in the multimodal high-resolution imaging, bimodal imaging, live cell imaging, and machine-learning-enhanced data analysis. These approaches show the significance of broadening the horizons of AFM and enable unprecedented explorations of protein assembly for biomaterial design and biomedical research.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Derivatization of Mirror-Image L -Nucleic Acids with 2'-OMe Modification for Thermal and Structural Stabilization

To further expand the functionality and enhance the stability of mirror-image nucleic acids as advanced agents for basic research and therapeutic design, we have synthesized 2'-deoxy-2'-methoxy- L -uridine phosphoramidite and incorporated it into L -DNA and L -RNA by solid-phase synthesis quantitatively. We found that the thermostability of L -nucleic acids is dramatically improved after introducing the modifications. Moreover, we successfully crystallized both L -DNA and L -RNA duplexes containing the 2'-OMe modifications and sharing identical sequences. Crystal structure determination and analysis revealed the overall structures of the mirror-image nucleic acids, and for the first time it was possible to interpret the structural deviations caused by 2'-OMe and 2'-OH groups in the oligonucleotides, which are very similar. In conclusion, this novel chemical nucleic acid modification has the potential to be used to design nucleic acid-based therapeutics and materials in the future.

2'-OMe-modifications↗
DOE OSTI2017

A HISTORICAL PERSPECTIVE OF NUCLEAR THERMAL HYDRAULICS

The nuclear thermal-hydraulics discipline was developed following the needs for nuclear power plants (NPPs) and, to a more limited extent, research reactors (RR) design and safety. As in all other fields where analytical methods are involved, nuclear thermal-hydraulics took benefit of the development of computers. Thermodynamics, rather than fluid dynamics, is at the basis of the development of nuclear thermal-hydraulics together with the experiments in complex two-phase situations, namely, geometry, high thermal density, and pressure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Large-scale additive manufacturing of self-heating molds

Large-scale material extrusion additive manufacturing technology is becoming the new mainstream technology for scaled-up composite mold and die applications. This paradigm shift in composite processing technology is primarily driven by out-of-autoclave tooling applications, in which fiber reinforced composite molds with scaled-up sizes and embedded heating elements are attractive. The present research describes the design, manufacturing, and testing of self-heating composite molds fabricated via a large-scale pellet extrusion 3D printing machine with an integrated wire co-extrusion tool. Polycarbonate (PC) composites reinforced with carbon fiber (PC/CF; 20 wt.%) and glass fiber (PC/GF; 20 wt.%) were used to fabricate mold parts. Joule heating thermal test results showed that uniform temperatures (~100 °C) were achieved for both PC/CF and PC/GF mold surfaces, using a custom-made feedback control power supply and infrared thermography. Mechanical characterizations, including tensile and flexural testing were performed on the wire-embedded and un-wired PC/CF and PC/GF base specimens to investigate the impact of the fiber reinforcement as well as the embedded wires. In the direction of extrusion, the ultimate tensile stress of PC/CF was 105 MPa, and that of PC/GF was 73 MPa, while the neat PC value was 64 MPa. Inner-bead voids and interfacial gaps were observed and characterized via optical and scanning electron microscopy. The embedded wires and inner bead impacted the mechanical properties of the composites. Furthermore, the stiffness of the wire-embedded mold was still satisfactory, proving that the technology can be used to fabricate additively manufactured out-of-oven/autoclave molds.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Soybean fallow and nitrification inhibitors: Strategies to reduce N 2 O emission intensities and N losses in Australian sugarcane cropping systems

The Australian sugar industry is facing mounting pressure to reduce the nitrogen (N) losses and nitrous oxide (N 2 O) emissions associated with N fertiliser use. Research has shown that N 2 O emissions from sugarcane (Saccharum officinarum L.) cropping systems can be reduced with the use of fertilisers coated with nitrification inhibitors, or by sowing legume crops in the fallows between sugarcane crop cycles. However, the efficacy of these two N management strategies across different climatic zones is still unclear, as results from field studies have been contradictory. The objectives of this study were therefore to use the DayCent model to assess the long-term effects of the two strategies (separately or in combination) on N 2 O emissions, N losses and yields. The model was parameterised using data from eight field experiments (39 treatments) conducted across four of the five main districts of the Australian sugarcane industry. A series of long-term scenarios embracing a range of N fertiliser rates (0- 160 kg N ha -1 applied as urea), climatic regions (Tropics and Subtropics), soil textures (fine- and coarse-textured soils) and N-loss risk scenarios (crop fertilised well before or close to the on-set of the wet season) were tested for both N management strategies. Simulations identified that the combined use of soybean (Glycine max L.) fallows and N fertiliser coated with the 3,4-dimethylpyrazole phosphate (DMPP) nitrification inhibitor was the most effective strategy to maintain or even increase current yields while significantly reducing N 2 O and cumulative N (mainly due to nitrate) losses. When used alone, the soybean fallow strategy on average reduced N losses over the entire crop cycle by 29 % compared with current industry best practice. However, this strategy showed a limited capacity to reduce N 2 O emissions over the entire cane crop cycle (median: -3% compared with current industry best practice), or even increased them in scenarios at high-risk of N losses in the Tropics. The use of urea coated with DMPP alone allowed current fertiliser N rates to be reduced by 30 % without any substantial yield penalty. In environments prone to high N losses, DMPP urea abated overall N losses and N 2 O emissions by 41 % and 30 %, respectively. This was the first study to use such an extensive dataset to parameterise a biogeochemical model for yields, N 2 O emissions and N losses in sugarcane cropping systems. Finally, the findings will be instrumental in guiding future research and policies designed to improve the profitability and environmental sustainability of this industry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Linking energy-cyber-physical systems with occupancy prediction and interpretation through WiFi probe-based ensemble classification

With the rapid advances in sensing and digital technologies, cyber-physical systems are regarded as the most viable platforms for improving building design and management. Researchers investigated the possibility of integrating energy management systems with cyber-physical systems to form energy-cyber-physical systems in order to promote building energy management. However, minimizing energy consumption while fulfilling building functions for energy-cyber-physical systems is challenging due to the dynamics of building occupants. As occupant behavior is a major source of uncertainty for energy management, ignoring it often results in both energy waste caused by overheating and overcooling as well as discomfort due to insufficient thermal and ventilation services. To mitigate such uncertainties, this study proposes an occupancy-linked energy-cyber-physical system that incorporates WiFi probe-based occupancy detection. The proposed framework utilizes ensemble classification algorithms to extract three forms of occupancy information. It creates a data interface to link energy management systems and cyber-physical systems and allows for automated occupancy detection and interpretation by assembling multiple weak classifiers for WiFi signals. A validation experiment in a large office room was conducted to examine the performance of the proposed occupancy-linked energy-cyber-physical systems. The experiment and simulation results suggest that, with a proper classifier and occupancy data type, the proposed model can potentially save about 26.4% of energy consumption in cooling and ventilation demands.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2019

Rethinking HVAC temperature setpoints in commercial buildings: The potential for zero-cost energy savings and comfort improvement in different climates, Building and Environment

Heating, Ventilation, and Air Conditioning (HVAC) systems are responsible for a significant share of the energy consumed in commercial buildings. While energy system retrofits have been found to reduce buildings' carbon footprint substantially, these measures are often hindered by financial, regulatory or design constraints. Recent research sheds light on energy management approaches to energy conservation such as energy-efficient settings of HVAC temperature setpoints. While existing case studies confirm the significant energy saving potential of efficient HVAC operation, there is scarcity of studies quantifying energy savings from optimal HVAC temperature setpoints comprehensively, while controlling for important factors, such as guaranteeing tenant thermal comfort levels and the impact of different climate conditions on the results. In this work, we apply simulation-based multi-objective optimization to fine-tune heating and cooling setpoints of large “typical” office buildings with respect to energy consumption and occupant thermal comfort. We apply the framework in seven climate zones across the US in an effort to examine spatial variations in the energy savings potential due to different climate conditions and propose targeted energy-saving strategies and policies. We show that locations with mild climates, such as San Francisco, CA, can realize up to 60% of annual HVAC-related energy savings without compromising the occupants' thermal comfort. This untapped potential to simultaneously improve building performance and occupants’ comfort drives the discussion on revisiting HVAC setpoint configuration standards in commercial buildings, either as part of individual building retrofit planning or as part of energy policy regulations.

Papadopoulos, Sokratis↗
DOE OSTI2020

Partners for life: building microbial consortia for the future

We report new technologies have allowed researchers to better design, build, and analyze complex consortia. These developments are fueling a wider implementation of consortium-based bioprocessing by leveraging synthetic biology, delivering on the field’s multitudinous promises of higher efficiencies, superior resiliency, augmented capabilities, and modular bioprocessing. Here we chronicle current progress by presenting a range of screening, computational, and biomolecular tools enabling robust population control, efficient division of labor, and programmatic spatial organization; furthermore, we detail corresponding advancements in areas including machine learning, biocontainment, and standardization. Additionally, we show applications in myriad sectors, including medicine, energy and waste sustainability, chemical production, agriculture, and biosensors. Concluding remarks outline areas of growth that will promote the utilization of complex community structures across the biotechnology spectrum.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2015

Thermally driven electrokinetic energy conversion with liquid water microjets

One goal of current energy research is to design systems and devices that can efficiently exploit waste heat and utilize solar or geothermal heat energy for electrical power generation. We demonstrate a novel technique exploiting water's large coefficient of thermal expansion, wherein modest thermal gradients produce the requisite high pressure for driving fast-flowing liquid water microjets, which can effect the direct conversion of the kinetic energy into electricity and gaseous hydrogen. Waste heat in thermoelectric generating plants and combustion engines, as well as solar and geothermal energy could be used to drive these systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Cross-scale modeling and experimental integration for advancing cathode electrolyte interphase studies in high energy density lithium-ion batteries

Electrochemical interfaces are critical to the performance and durability of lithium-ion batteries (LIBs). The solid electrode-electrolyte interphase (SEI and CEI) structures that form during cycling can passivate reactive surfaces, ensuring safe operation, but also may contribute to performance degradation. Understanding the microscopic factors influencing interphase formation, growth, and evolution is essential for balanced battery design. While significant research has focused on the anode-electrolyte interphase (SEI), the cathode-electrolyte interphase (CEI) remains less explored, despite its importance in high-voltage and advanced battery technologies. Challenges in conducting in-situ or operando experiments arise from the occluded nature of these interfaces and the long timescales involved, often leading to biased interpretations. A validated multi-scale, multi-physics modeling approach, integrated with advanced characterization techniques, can effectively elucidate the intrinsic stability of electrolyte and cathode surfaces, the impact of chemical heterogeneity, and the role of microstructural features on CEI performance. In conclusion, this article reviews current modeling and simulation strategies for studying CEI in advanced LIBs and highlights opportunities for future methodological advancements and experimental integration.

Cathode-electrolyte interphase↗
DOE OSTI2014

Improving the Usability of Integrated Assessment for Adaptation Practice: Insights from the U.S. Southeast Energy Sector

Energy systems comprise a key sector of the U.S. economy, and one that has been identified as potentially vulnerable to the effects of climate variability and change. However, understanding of adaptation processes in energy companies and private entities more broadly is limited. It is unclear, for example, the extent to which energy companies are well-served by existing knowledge and tools emerging from the impacts, adaptation and vulnerability (IAV) and integrated assessment modeling (IAM) communities and/or what experiments, analyses, and model results have practical utility for informing adaptation in the energy sector. As part of a regional IAM development project, we investigated available evidence of adaptation processes in the energy sector, with a particular emphasis on the U.S. Southeast and Gulf Coast region. A mixed methods approach of literature review and semi-structured interviews with key informants from energy utilities was used to compare existing knowledge from the IAV community with that of regional stakeholders. That comparison revealed that much of the IAV literature on the energy sector is climate-centric and therefore disconnected from the more integrated decision-making processes and institutional perspectives of energy utilities. Increasing the relevance of research and assessment for the energy sector will necessitate a greater investment in integrated assessment and modeling efforts that respond to practical decision-making needs as well as greater collaboration between energy utilities and researchers in the design, execution, and communication of those efforts.

de Bremond, Ariane↗
DOE OSTI2019

Binder jet additive manufacturing method to fabricate near net shape crack-free highly dense Fe-6.5 wt.% Si soft magnets

High silicon (Si) electrical steel has the potential for efficient use in applications such as electrical motors and generators with cost-effective in processing, but it is difficult to manufacture. Increasing the Si content beyond 3 wt.% improves magnetic and electrical properties, with 6.5 wt.% being achievable. The main goal of this research is to design, develop, and implement a scalable additive manufacturing process to fabricate Fe with 6.5 wt.% Si (Fe–6Si) steel with high magnetic permeability, high electrical resistivity, low coercivity, and low residual induction that other methods cannot achieve because of manufacturing limitations. Binder jet additive manufacturing was used to deposit near net shape components that were subsequently sintered via solid-state sintering to achieve near full densification. Here, it is shown that the use of solid-state sintering mitigates cracking since no rapid solidification occurs unlike fusion-based additive technologies. The Fe–6Si samples demonstrated an ultimate tensile strength of 434 MPa, electrical resistivity of 98 μΩ cm, and saturation magnetization of 1.83 T with low coercivity and high permeability. The results strongly supports to replace the only available 0.1 mm thick chemical vapor deposition (CVD) produced Si steel using the cost effective AM method with good mechanical and magnetic properties for motor ap

36 MATERIALS SCIENCE↗
DOE OSTI2018

The Transcriptional Landscape of Radiation-Treated Human Prostate Cancer: Analysis of a Prospective Tissue Cohort

The resistance of prostate cancer to radiation therapy (RT) is a significant clinical issue and still largely unable to be guided by patient-specific molecular characteristics. The present study describes the gene expression changes induced in response to RT in human prostate tissue obtained from a prospective tissue acquisition study designed for radiobiology research.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2020

Tailoring conductive networks within hollow carbon nanospheres to host phosphorus for advanced sodium ion batteries

The formidable sustainability challenges in advancing energy storage technologies call for game-changing research in battery designs. The previous pursuing of novel cathode materials with high redox potentials impedes the vast applications due to the simultaneous electrolyte decomposition at high potentials, though they are expected to deliver high specific capacities. Eventually, people start thinking in an opposite way, desirable anode materials with low redox potentials can also own high specific capacities. Among all the promising candidates, phosphorus-based anodes in sodium ion batteries (SIBs) have received considerable attention owing to the low cost and relatively high natural abundance of phosphorus. More importantly, phosphorus can store three sodium atoms and enable a high theoretical capacity of 2596 mAh g -1 , which overwhelms any other SIB anode currently available. However, the poor electronic conductivity and large volume change of phosphorus during cycling severely deteriorate battery performance. The most widely used strategy is to confine phosphorus within well-designed carbon hosts. Here, we thereby introduce a new type of porous hollow carbon with conductive-network interior as phosphorus host, which not only improves the electrical conductivity, but also creates enough interior surface for maximizing phosphorus utilization and shortening the ion's diffusion distance, compared to those conventional hollow carbon hosts. Therefore, the as-prepared red phosphorus-carbon spheres composites (RP/CS) exhibit superior rate performance (similar to 1083 mAh g -1 at 4 A g -1 , similar to 837 mAh g -1 even at 8 A g -1 ) and excellent cycle life (1027 mAh g -1 at 4 A g -1 more than 2000 cycles).

25 ENERGY STORAGE↗
DOE OSTI2024

Highly-detailed neutronic and thermal-hydraulic coupled calculations for OPAL reactor using diverse codes and approaches

The industry-standard approach for designing and operating research reactors cores relies on well-established methodologies that consider uncoupled neutronic calculations and a subchannel analysis of the Thermal-Hydraulic (TH) associated problem. Advancements in computing power and codes allow detailed Multiphysics approaches to be implemented, thereby reducing conservatism. In this study, a comparative analysis of results from diverse detailed neutronic-TH coupled core approaches is developed. To address a realistic application case, the comparison is made for a reported critical configuration from the Open Pool Australian Lightwater research reactor (OPAL) at Hot Full Power (HFP) and low burnup. Both cell-core and stochastic methodologies for neutronics are evaluated, whereas two different subchannel codes are considered for TH. In conclusion, the convergence of the coupled schemes, and the consistency of the main parameters are discussed, showing the compatibility of the alternative methods and their ability to offer critical insights not captured by standard practices.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗