Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reduced Defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Influence of electrical field on the susceptibility of gallium nitride transistors to proton irradiation

Radiation susceptibility of electronic devices is commonly studied as a function of radiation energetics and device physics. Often overlooked is the presence or magnitude of the electrical field, which we hypothesize to play an influential role in low energy radiation. Accordingly, we present a comprehensive study of low-energy proton irradiation on gallium nitride high electron mobility transistors (HEMTs), turning the transistor ON or OFF during irradiation. Commercially available GaN HEMTs were exposed to 300 keV proton irradiation at fluences varying from 3.76 × 10 12 to 3.76 × 10 14 cm 2 , and the electrical performance was evaluated in terms of forward saturation current, transconductance, and threshold voltage. The results demonstrate that the presence of an electrical field makes it more susceptible to proton irradiation. The decrease of 12.4% in forward saturation and 19% in transconductance at the lowest fluence in ON mode suggests that both carrier density and mobility are reduced after irradiation. Additionally, a positive shift in threshold voltage (0.32 V and 0.09 V in ON and OFF mode, respectively) indicates the generation of acceptor-like traps due to proton bombardment. high-resolution transmission electron microscopy and energy dispersive x-ray spectroscopy analysis reveal significant defects introduction and atom intermixing near AlGaN/GaN interfaces and within the GaN layer after the highest irradiation dose employed in this study. According to in-situ Raman spectroscopy, defects caused by irradiation can lead to a rise in self-heating and a considerable increase in (∼750 times) thermoelastic stress in the GaN layer during device operation. The findings indicate device engineering or electrical biasing protocol must be employed to compensate for radiation-induced defects formed during proton irradiation to improve device durability and reliability.

gallium nitride↗

Quantum electrodynamics in a whispering-gallery microcavity coated with a polymer nanolayer

Quasi-transverse-electric and -transverse-magnetic fundamental whispering gallery modes in a polymer-coated silica microtoroid are theoretically investigated and demonstrated to possess very high-quality factors. The existence of a nanometer-thickness layer not only evidently reduces the cavity mode volume but also draws the maximal electric field's position of the mode to the outside of the silica toroid, where single quantum dots or nanocrystals are located. Both effects result in a strongly enhanced coherent interaction between a single dipole (for example, a single defect center in a diamond crystal) and the quantized cavity mode. Since the coated microtoroid is highly feasible and robust in experiments, it may offer an excellent platform to study strong-coupling cavity quantum electrodynamics, quantum information, and quantum computation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Module Degradation Mechanisms Studied by a Multi-Scale Approach

A key pathway to meeting the Department of Energy SunShot 2020 goals is to reduce financing costs by improving investor confidence through improved photovoltaic (PV) module reliability. A comprehensive approach to further understand and improve PV reliability includes characterization techniques and modeling from module to atomic scale. Imaging techniques, which include photoluminescence, electroluminescence, and lock-in thermography, are used to locate localized defects responsible for module degradation. Small area samples containing such defects are prepared using coring techniques and are then suitable and available for microscopic study and specific defect modeling and analysis.

14 SOLAR ENERGY↗

Equivalent Properties of Interfacial Void Defects at the CFRTP-adhesive Interface and Their Detrimental Effects on the Bonding Performance of Metal-CFRTP Dissimilar Joints

This paper revealed the detrimental effects of micro-scale air interfacial voids on the debonding at the interface of carbon-fiber-reinforced polyphthalamide (CFRPPA) and thermoset adhesive, representing a weak adherend-adhesive interface, within a dissimilar joint made of an aluminum alloy and a CFRPPA. The reduced lap shear strength of the joint, due to different void area fractions at the CFRPPA-adhesive interface, can be computationally described by using equivalent interfacial properties in the modeling to avoid the explicit modeling of the micro-scale interfacial voids. Such equivalent interfacial properties (e.g., interfacial normal strength, etc.) was found to have a non-linear relationship with respect to interfacial void area fraction as well as lap shear strength. This work has practical applications by utilizing equivalent interfacial properties for the analytical and/or computational design(s) of adhesively bonded joints.

Qiao, Yao↗

Effect of Te Inclusions on the Performance of Cdznte Radiation Detectors

Te inclusions existing at high concentrations in CdZnTe (CZT) material can degrade the performance of CZT detectors. These microscopic defects trap the free electrons generated by incident radiation, so entailing significant fluctuations in the total collected charge and thereby strongly affecting the energy resolution of thick (long-drift) detectors. Such effects were demonstrated in thin planar detectors, and, in many cases, they proved to be the dominant cause of the low performance of thick detectors, wherein the fluctuations in the charge losses accumulate along the charge's drift path. We continued studying this effect using different tools and techniques. We employed a dedicated beamline recently established at BNL's National Synchrotron Light Source for characterizing semiconductor radiation detectors, along with an IR transmission microscope system, the combination of which allowed us to correlate the concentration of defects with the devices' performances. We present here our new results from testing over 50 CZT samples grown by different techniques. Our goals are to establish tolerable limits on the size and concentrations of these detrimental Te inclusions in CZT material, and to provide feedback to crystal growers to reduce their numbers in the material.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Void Nucleation, Growth and Coalescence in Irradiated Metals

A novel computational treatment of dense, stiff, coupled reaction rate equations is introduced to study the nucleation, growth, and possible coalescence of cavities during neutron irradiation of metals. Radiation damage is modeled by the creation of Frenkel pair defects and helium impurity atoms. A multi-dimensional cluster size distribution function allows independent evolution of the vacancy and helium content of cavities, distinguishing voids and bubbles. A model with sessile cavities and no cluster-cluster coalescence can result in a bimodal final cavity size distribution with coexistence of small, high-pressure bubbles and large, low-pressure voids. A model that includes unhindered cavity diffusion and coalescence ultimately removes the small helium bubbles from the system, leaving only large voids. The terminal void density is also reduced and the incubation period and terminal swelling rate can be greatly altered by cavity coalescence. Temperature-dependent trapping of voids/bubbles by precipitates and alterations in void surface diffusion from adsorbed impurities and internal gas pressure may give rise to intermediate swelling behavior through their effects on cavity mobility and coalescence.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructure and hydrogenation properties of a melt-spun non-stoichiometric Zr-based Laves phase alloy

Alloy with composition of Zr{sub 0.9}Ti{sub 0.1}V{sub 1.7} off normal stoichiometric proportion is selected to investigate the effect of defects introduced by non-stoichiometry on hydrogenation kinetics of Zr–Ti–V Laves phase alloys. Microstructure and phase constituent of melt-spun ribbons have been investigated in this work. The activation process, hydrogenation kinetics, thermodynamics characteristics and hydride phase constituent of as-cast alloy and melt-spun ribbons are also compared. Comparing with the as-cast alloy, the dominant Laves phase ZrV{sub 2} is preserved, V-BCC phase is reduced and α-Zr phase is replaced by a small amount of Zr{sub 3}V{sub 3}O phase in melt-spun ribbons. Melt-spun ribbons exhibit easy activation and fast initial hydrogen absorption on account of the increased specific surface area. However, the decrease in unit cell volume of the dominant phase leads to the decrease in hydrogen absorption capacity. Melt-spinning technique raises the equilibrium pressure and decreases the stability of hydride due to the decrease of unit cell volume and the elimination of α-Zr phase, respectively. Melt-spun ribbons with fine grains show improved hydrogen absorption kinetics comparing with that of the as-cast alloy. Meanwhile, the prevalent micro twins observed within melt-spun ribbons are believed to account for the improved hydrogen absorption kinetics. - Highlights: • Role of defects on hydrogenation kinetics of Zr-based alloys is proposed. • Microstructure and hydrogenation properties of as-cast/melt-spun alloy are compared. • Melt-spinning technique improves the hydrogenation kinetics of Zr{sub 0.9}Ti{sub 0.1}V{sub 1.7} alloy. • Refined grains and twin defects account for improved hydrogen absorption kinetics.

36 MATERIALS SCIENCE↗

Optimizing proton conductivity in zirconates through defect engineering

The alkaline-earth zirconates (CaZrO 3 , SrZrO 3 , and BaZrO 3 ) are under active investigation as solid-state electrolytes in hydrogen fuel cells. Their performance as proton conductors depends critically on the properties of acceptor dopants. Here, we use first-principles calculations to study the role of acceptors and point defects in incorporating protons through an oxygen-vacancy-mediated process. For CaZrO 3 , we find that Zr Ca antisites suppress formation of oxygen vacancies. Other intrinsic point defects are shown not to hinder performance. Common unintentional impurities, such as C and N, are not good acceptors but can incorporate in other configurations. Our results show that the effectiveness of common dopants such as Sc and Y is limited by self-compensation due to their incorporation on the "wrong" cation site, where they act as donors. We demonstrate that using alkali metal dopants overcomes this problem, as the formation energy of compensating donors is very high. Alkali metal dopants also have low binding energies for protons, reducing their tendency to act as traps and hence enhancing proton conductivity. As a result, our guidelines for choosing acceptor dopants and optimizing synthesis conditions can greatly improve the efficacy of these proton-conducting oxides as solid-state electrolytes.

08 HYDROGEN↗

Phase-Separated, Epitaxial, Nanostructured LaMnO 3 +MgO Composite Cap Layer Films for Propagation of Pinning Defects in YBa 2 Cu 3 O 7-x Coated Conductors

Nanostructural modulation in the cap layer used in coated conductors can be a potential source for nucleating microstructural defects into the superconducting layer for improving the flux-pinning. We report on the successful fabrication of phase separated, epitaxial, nanostructured films comprised of LaMnO{sub 3} (LMO) and MgO via pulsed laser deposition (PLD) on biaxially-textured MgO metallic templates with a LMO buffer layer. Scanning Auger compositional mapping and transmission electron microscopy cross sectional images confirm the nanoscale, spatial modulation corresponding to the nanostructured phase separation in the film. YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} films (0.8 {micro}m thick) grown using PLD on such phase separated, nanostructured cap layers show reduced field dependence of the critical current density with an ? value of -0.38 (in J{sub c}-H{sup -{alpha}}).

36 MATERIALS SCIENCE↗

Influence of carbon on the kinetics of He migration and clustering in {alpha}-Fe from first principles

Density functional theory (DFT) calculations have been performed to study the interaction of carbon with He-vacancy complexes in {alpha}-Fe. Using the DFT predictions, a rate theory model that accounts for the evolution of carbon, helium, and defects created during irradiation has been developed to explore the influence of carbon on the kinetics of He diffusion and clustering after implantation in {alpha}-Fe. This DFT-based rate theory model predicts that carbon not only influences vacancy (V) migration but also He desorption, enhancing He mobility in particular for low V/C ratios. The reason for this behavior is mainly the formation of VC and VC{sub 2} complexes, which significantly reduces the mobility of vacancies with respect to pure Fe, inhibiting the formation of higher order clusters, i.e., He{sub n}V{sub m}, and increasing thus the number of He at substitutional positions at room temperature. Assuming reasonable values of carbon concentration, we successfully reproduce and interpret existing desorption experimental results, where all the energetic parameters for the relevant reactions were obtained from first-principles calculations. In addition, our study provides a detailed explanation of the various He migration mechanisms that prevail under the considered experimental conditions.

36 MATERIALS SCIENCE↗

Establishing a Theoretical Landscape for Identifying Basal Plane Active 2D Metal Borides (MBenes) toward Nitrogen Electroreduction

Abstract To achieve efficient ammonia synthesis via electrochemical nitrogen reduction reaction (NRR), a qualified catalyst should have both high specific activity and large active surface area. However, integrating these two merits into one single material remains a big challenge due to the difficulty in balancing multiple reaction intermediates. Here, it is demonstrated that the boron‐analogues of MXenes, namely “MBenes”, could cope with the challenge and achieve the high activity and large reaction region simultaneously toward NRR. Using extensive density functional theory computations and taking 16 MBenes as representatives, it is identified that seven MBenes (CrB, MoB, WB, Mo 2 B, V 3 B 4 , CrMnB 2 , and CrFeB 2 ) not only have intrinsic basal plane activity for NRR with limiting potentials ranging from −0.22 to −0.82 V, but also possess superior capability of suppressing the competitive hydrogen evolution reaction. Particularly, different from the MXenes whose surface oxidation may block the active sites, once oxidized, these MBenes can catalyze NRR via the self‐activating process, reducing O*/OH* into H 2 O* under reaction conditions, and favoring the N 2 electroreduction. As a result, the exceptional activity and selectivity, high active area (≈10 19 m −2 ), and antioxidation nature render these MBenes as pH‐universal catalysts for NH 3 production without introducing any dopants and defects.

Guo, Xiangyu↗

Vacancy Mediated Electrooxidation of 5‐Hydroxymethyl Furfuryl Using Defect Engineered Layered Double Hydroxide Electrocatalysts

Abstract Electrochemical biomass oxidation coupled with hydrogen evolution offers a promising route to generate value‐added chemicals and clean energy. The complex adsorption behavior of 5‐hydroxymethyl furfural (HMF) and hydroxyl ions (OH − ) on the electrocatalyst surface during HMF electrooxidation reaction (HMFOR) necessitates an in‐depth understanding of active sites available for adsorption. Herein, oxygen vacancy (V O ) defects are introduced in NiFe layered double hydroxide (LDH) using Ce dopants to manipulate electronic structure. Synchrotron‐based HE‐XRD and XAS indicate negligible V O in La‐doped NiFe while Ce doping leads to V O defects due to flexible Ce redox (Ce 3+ ↔ Ce 4+ ). The V O ‐rich Ce‐NiFe exhibits higher Faradic efficiency of ≈90% to produce 2,5‐furan dicarboxylic acid (FDCA), far greater than ≈60% for NiFe V O in Ce‐NiFe act as alternative active sites for OH − adsorption, hence reducing adsorption competition for the same metal sites. DFT calculation results corroborate experimental findings by showcasing that the presence of V O in Ce‐NiFe manipulates the adsorption energies and facilitates the chemical adsorption OH − in V O to improve HMFOR. In situ HE‐XRD derived pair distribution function coupled to RMC simulations confirm OH − trapping in V O and HMF adsorption on metal centers as evident by interlayer distance evolution. Taken together, this work showcases routes for dual‐site electrocatalyst design for improved biomass electrooxidation.

Chemistry↗

Ascorbic acid suppresses endotoxemia and NF-κB signaling cascade in alcoholic liver fibrosis in guinea pigs: A mechanistic approach

Alcohol consumption increases the small intestinal bacterial overgrowth (SIBO) and intestinal permeability of endotoxin. The endotoxin mediated inflammatory signaling plays a major role in alcoholic liver fibrosis. We evaluated the effect of ascorbic acid (AA), silymarin and alcohol abstention on the alcohol induced endotoxemia and NF-κB activation cascade pathway in guinea pigs (Cavia porcellus). Guinea pigs were administered ethanol at a daily dose of 4 g/kg b.wt for 90 days. After 90 days, ethanol administration was stopped. The ethanol treated animals were divided into abstention, silymarin (250 mg/kg b.wt) and AA (250 mg/kg b.wt) supplemented groups and maintained for 30 days. The SIBO, intestinal permeability and endotoxin were significantly increased in the ethanol group. The mRNA expressions of intestinal proteins claudin, occludin and zona occludens-1 were significantly decreased in ethanol group. The mRNA levels of inflammatory receptors, activity of IKKβ and the protein expressions of phospho-IκBα, NF-κB, TNF-α, TGF-β{sub 1} and IL-6 were also altered in ethanol group. The expressions of fibrosis markers α-SMA, α{sub 1} (I) collagen and sirius red staining in the liver revealed the induction of fibrosis. But the supplementation of AA could induce greater reduction of ethanol induced SIBO, intestinal barrier defects, NF-κB activation and liver fibrosis than silymarin. The possible mechanism may be the inhibitory effect of AA on SIBO, intestinal barrier defect and IKKβ, which decreased the activation of NF-κB and synthesis of cytokines. This might have led to suppression of HSCs activation and liver fibrosis. - Highlights: • Alcohol increases intestinal bacterial overgrowth and permeability of endotoxin. • Endotoxin mediated inflammation plays a major role in alcoholic liver fibrosis. • Ascorbic acid reduces endotoxemia, NF-κB activation and proinflammatory cytokines. • AA's action is by inhibition of SIBO, IKKβ and alteration of intestinal permeability. • This might have led to suppression of HSCs activation and liver fibrosis.

60 APPLIED LIFE SCIENCES↗

Resistance of Boron Nitride Nanotubes to Radiation-Induced Oxidation

We present unprecedented results on the damage thresholds and pathways for boron nitride nanotubes (BNNT) under the influence of energetic electrons in an oxidative gas environment, using an environmental aberration-corrected electron microscope over a range of oxygen pressures. We observe a damage cascade process that resists damage until a higher electron dose, compared with carbon nanotubes, initiating at defect-free BNNT sidewalls and proceeding through the conversion from crystalline nanotubes to amorphous boron nitride (BN), resisting oxidation throughout. We compare with prior results on the oxidation of carbon nanotubes and present a model that attributes the onset of damage in both cases to a physisorbed oxygen layer that reduces the threshold for damage onset. Surprisingly, increased temperatures offer protection against damage, as do electron dose rates that significantly exceed the oxygen dose rates, and our model attributes both effects to a physisorbed oxygen population.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas diffusion ultrabarriers on polymer substrates using Al{sub 2}O{sub 3} atomic layer deposition and SiN plasma-enhanced chemical vapor deposition

Thin films grown by Al{sub 2}O{sub 3} atomic layer deposition (ALD) and SiN plasma-enhanced chemical vapor deposition (PECVD) have been tested as gas diffusion barriers either individually or as bilayers on polymer substrates. Single films of Al{sub 2}O{sub 3} ALD with thicknesses of >=10 nm had a water vapor transmission rate (WVTR) of <=5x10{sup -5} g/m{sup 2} day at 38 deg. C/85% relative humidity (RH), as measured by the Ca test. This WVTR value was limited by H{sub 2}O permeability through the epoxy seal, as determined by the Ca test for the glass lid control. In comparison, SiN PECVD films with a thickness of 100 nm had a WVTR of approx7x10{sup -3} g/m{sup 2} day at 38 deg. C/85% RH. Significant improvements resulted when the SiN PECVD film was coated with an Al{sub 2}O{sub 3} ALD film. An Al{sub 2}O{sub 3} ALD film with a thickness of only 5 nm on a SiN PECVD film with a thickness of 100 nm reduced the WVTR from approx7x10{sup -3} to <=5x10{sup -5} g/m{sup 2} day at 38 deg. C/85% RH. The reduction in the permeability for Al{sub 2}O{sub 3} ALD on the SiN PECVD films was attributed to either Al{sub 2}O{sub 3} ALD sealing defects in the SiN PECVD film or improved nucleation of Al{sub 2}O{sub 3} ALD on SiN.

36 MATERIALS SCIENCE↗

Upgraded metallurgical-grade silicon solar cells with efficiency above 20%

We present solar cells fabricated with n-type Czochralski–silicon wafers grown with strongly compensated 100% upgraded metallurgical-grade feedstock, with efficiencies above 20%. The cells have a passivated boron-diffused front surface, and a rear locally phosphorus-diffused structure fabricated using an etch-back process. The local heavy phosphorus diffusion on the rear helps to maintain a high bulk lifetime in the substrates via phosphorus gettering, whilst also reducing recombination under the rear-side metal contacts. The independently measured results yield a peak efficiency of 20.9% for the best upgraded metallurgical-grade silicon cell and 21.9% for a control device made with electronic-grade float-zone silicon. The presence of boron-oxygen related defects in the cells is also investigated, and we confirm that these defects can be partially deactivated permanently by annealing under illumination.

36 MATERIALS SCIENCE↗

Oxygen vacancy contributions to the electrical stress response and endurance of ferroelectric hafnium zirconium oxide thin films

Despite its scalability and CMOS process compatibility, the limited endurance and sub-optimal stress response of ferroelectric Zr-substituted hafnia [(Hf,Zr)O 2 ] have been one of the key impediments toward its integration into practical device and technology applications. Here, using electrical measurements complemented by photoluminescence spectroscopy, we investigate the underlying mechanisms behind this behavior in 10 nm thick W/Hf 0.5 Zr 0.5 O 2 /W capacitors. Analyzing the evolution of leakage current with stress cycles and the spectroscopic response of the stress-induced leakage current, we attribute the behavior to defect levels, which lie at 0.6 eV from the conduction band edge of the ferroelectric. Photoluminescence spectroscopy, in turn, further corroborates the defect level's position within the bandgap while enabling its attribution to the presence of oxygen vacancies. Furthermore, this work helps to identify oxygen vacancies as the key factor responsible for the degraded endurance and stress response in (Hf,Zr)O 2 and subsequently motivates the exploration of methods to reduce the oxygen vacancy concentrations without destabilizing the ferroelectric orthorhombic phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

OxyR regulates the oxidative stress response in Zymomonas mobilis during oxic growth and anoxic biofuel fermentation

The bacterium Zymomonas mobilis is widely studied for its potential as an industrial biofuel producer. Anoxic fermentation by Z. mobilis in lignocellulosic hydrolysate can generate bioethanol from renewable plant biomass. In this study, we deleted a gene from the Z. mobilis genome encoding a homolog of OxyR, a transcription factor that activates an oxidative stress response in bacteria to reduce reactive oxygen species (ROS). Deletion of this transcription factor inhibited growth of Z. mobilis in oxic, but not anoxic, conditions in laboratory media. A ROS probe revealed that the oxyR response is required to reduce intracellular ROS during oxic growth. Importantly for biofuel production, the absence of oxyR inhibited growth and delayed ethanol production during anoxic hydrolysate fermentation. To determine the source of oxidative stress in hydrolysates, we grew ΔoxyR in a synthetic hydrolysate containing known inhibitors found in hydrolysates. There was no growth defect in ΔoxyR in the synthetic hydrolysate, indicating that known inhibitory compounds are not the source of anoxic oxidative stress. We determined that ammonia-fiber expansion switchgrass hydrolysate contains significant peroxide concentrations. Addition of catalase to hydrolysate improves growth of both ΔoxyR and wild-type Z. mobilis in hydrolysate. This study uncovers an important source of stress to Z. mobilis during biofuel fermentation.

OxyR↗