SEARCH · Engineering Papers

Results for “Reanalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

NASA NDE Fracture Critical Detectable Flaw Sizes History and Methodology

NASA requires that NDE methods and inspectors demonstrate 90% Probability of Detection (POD) with 95% confidence for critical flaw sizes when inspecting fracture critical metallic components. NASA addresses the known variability of NDE inspector capability in two ways. The first, Special NDE, requires that every inspector demonstrate the required 90/95 POD, which is resource intensive. The second approach is Standard NDE for which conservative flaw sizes for different NDE methods are provided such that it is expected that most properly trained inspectors will exceed the 90/95 POD requirement. As such, individual POD demonstration testing is not required. The origin of NASA Standard NDE dates to the start of the Space Shuttle Program in the early 1970’s. In the first study to quantitatively assess NDE methods and inspectors, the performance of multiple inspectors was evaluated for different NDE methods using a large set of fatigue cracked specimens. A rudimentary POD analysis was performed to estimate the 90/95 POD flaw size for each inspector for each method. Additionally, the average and standard deviation of the 90/95 POD flaw size across the multiple inspectors was calculated to estimate the flaw size for which 95 percent of inspectors would provide the 90/95 POD capability. These estimated 90/95/95 POD flaw sizes evolved into the NASA Standard NDE flaw sizes still in use for structural analysis five decades later. The methodology for performing Standard NDE POD studies was never documented in NASA requirements. Furthermore, POD analysis methods have significantly evolved since this seminal study. Likewise, NDE methods have improved and there has been a push to reassess Standard NDE flaw sizes for existing methods, and to develop Standard NDE flaw sizes for new methods such as digital radiography. In this study, a Standard NDE POD methodology was developed and baselined using the historical data. This reanalysis of the historical data identified several deficiencies in the original test plan as well as an overall lack of conservatism in the estimated 90/95/95 POD flaw sizes. The results of this historical review and the new methodology are being incorporated into an update of NASA NDE POD requirements.

Nondestructive Evaluation↗

NASA NTRSDate not supplied

Are the Stratospheric Teleconnection Pathways Similar for Fast and Slowly Propagating Madden-Julian Oscillation (MJO) Episodes?

The Madden-Julian Oscillation (MJO) can influence the extratropical circulation on timescales up to several weeks, with a dependence on the MJO characteristics: MJO events that propagate slowly across the Maritime Continent have a stronger impact on Euro-Atlantic weather than fast MJO events. The slow (fast) MJO events are defined as events that take more (less) than 15 (10) days to propagate from the Indian Ocean (phase 3) to the Pacific Ocean (phase 6), and the MJO amplitude has to be greater than 1 for at least three consecutive days in phase 3 and phase 6. Slowly propagating MJO events lead to a stronger North Atlantic Oscillation (NAO) response than fast MJO events, and the positive (negative) NAO response for slow events occur after a lag of 10 days following phase 4 (phases 7-8). Furthermore, the MJO can influence the strength of the stratospheric polar vortex, which in turn can impact the NAO via downward coupling. While the tropospheric pathway for teleconnections from the MJO events with varying phase speeds is well understood, the stratospheric pathways for MJO events with different propagation speeds have yet to be explored. In this talk, I will discuss the stratospheric pathways during fast and slow MJO episodes using reanalysis data with respect to the strength of the Northern Hemisphere stratospheric polar vortex and subsequent downward coupling to the troposphere. This is evident from the zonal wind response within the stratospheric polar vortex at 60N and 10-hPa and the geopotential height response at 500-hPa and 100-hPa.

Priyanka Yadav↗

NASA NTRS2023

Late-Fall Satellite-Based Soil Moisture Observations Show Clear Connections to Subsequent Spring Streamflow

Because runoff production is more efficient over wetter soils, and because soil moisture has an intrinsic memory, soil moisture information can potentially contribute to the accuracy of streamflow predictions at seasonal leads. In this work, we use surface (0-5 cm) soil moisture retrievals obtained with the National Aeronautics and Space Administration’s Soil Moisture Active Passive satellite instrument in conjunction with streamflow measurements taken within 236 intermediate-scale (2,000 – 10,000 km2) unregulated river basins in the conterminous United States to show that late-fall satellite-based surface soil moisture estimates are indeed strongly connected to subsequent springtime streamflow. We thus show that the satellite-based soil moisture retrievals, all by themselves, have the potential to produce skillful seasonal streamflow predictions several months in advance. In poorly instrumented regions, they could perform better than reanalysis soil moisture products in this regard.

Randal D Koster↗

NASA NTRS2020

Sources, frequency, and chemical nature of dust events impacting the United States East Coast

This study examines 14 years (2004–2017) of surface aerosol composition data from the EPA IMPROVE network with a focus on the monthly profile, sources, and chemical nature of extreme dust events (>92nd percentile of fine soil concentration each month) impacting ten sites along the United States East Coast ranging in latitude from Florida to Maine. Based on trajectory, remote sensing, and reanalysis data, dust events were categorized into four source categories: African, Asian, Mix (African + Asian), and Other (anything other than African and Asian). The results reveal that extreme dust events account for between 3.3% and 4.6% of total available days depending on the site. March-April-May (MAM) had the most (174) dust events, followed by June-July-August (JJA) with 172, and then by September-October-November (SON) with 160 and December-January-February (DFJ) with 150. There is a variability in the predominant dust sources based on latitude, with African and Other sources more influential from North Carolina to the south, while Asian and Other were most important from New Jersey to the north. The Mix category is consistently the least frequent dust category at all sites. The African dust category was linked to the highest fine soil levels across the entire East Coast relative to other sources regardless of location. JJA is mostly impacted by African dust for sites ranging from Florida to New Jersey, while MAM is dominated by Asian dust for all sites. Mix events occurred mostly between April and October and Other events were most common outside of MAM and JJA seasons. Seven out of ten sites had Other as the most dominant source. Aerosol constituents organic carbon (OC) and elemental carbon (EC) had higher average concentrations in Other events (2.39 ± 0.78 μg m -3 and 0.79 ± 0.81 μg m -3 , respectively) as compared to the other three source categories, suggestive of regional anthropogenic emissions. Moreover, the ratios of elements (Si:Al, K:Fe, Fe:Ca, Al:Ca) contributing to fine soil and PM 2.5 :PM 10 exhibited distinct values depending on the dust source category and the site. This study builds on the growing evidence of the importance of long-range transport of dust in impacting distant regions and how a variety of sources can impact the U.S. East Coast at all times of the year.

Abdulmonam M. Aldhaif↗

NASA NTRS2023

A Wind-Driven Snow Redistribution Module for Alpine3d V3.3.0: Adaptations Designed for Downscaling Ice Sheet Surface Mass Balance

Ice sheets gain mass via snow accumulation at the ice sheet surface, which is the primary component of surface mass balance. On the Antarctic ice sheet, winds redistribute snow resulting in surface mass balance that is variable in both space and time. Representing wind-driven snow redistribution processes in models is critical for local assessments of surface mass balance, repeat altimetry studies, and interpretation of ice core accumulation records. To this end, we have adapted Alpine3D, an existing distributed snow modeling framework, to downscale Antarctic surface mass balance to horizontal resolutions up to 1 km. In particular, we have introduced a new two-dimensional advection-based wind-driven snow redistribution module that is driven by an offline coupling between WindNinja, a wind downscaling model, and Alpine3D. We then show that large accumulation variability can be at least partially explained by terrain-induced wind speed variations which subsequently redistribute snow around rolling topography. By comparing Alpine3D to airborne-derived snow accumulation measurements within a testing domain over Pine Island Glacier in West Antarctica, we demonstrate that our Alpine3D downscaling approach improves surface mass balance estimates when compared to MERRA-2, a global atmospheric reanalysis which we use as atmospheric forcing. In particular, when compared to MERRA-2, Alpine3D reduces simulated surface mass balance root mean squared error by 23.4 mm w.e.yr−1 (13%) and increases variance explained by 24%. Despite these improvements, Alpine3D still underestimates observed accumulation variability, thus providing an opportunity for future model improvement.

Eric Keenan↗

NASA NTRS2023

An Evaluation of A Physics-Based Firn Model and A Semi-Empirical Firn Model Across the Greenland Ice Sheet (1980–2020)

The Greenland Ice Sheet's (GrIS) firn layer buffers the ice sheet's contribution to sea level rise by storing meltwater in its pore space. However, available pore space and meltwater retention capability is lost due to ablation of the firn layer and refreezing of meltwater as near-surface ice slabs in the firn. Understanding how firn properties respond to climate is important for constraining the GrIS's future contribution to sea level rise in a warming climate. Observations of firn density provide detailed information about firn properties, but they are spatially and temporally limited. Here we use two firn models, the physics-based SNOWPACK model and the Community Firn Model configured with a semi-empirical densification equation (CFM-GSFC), to quantify firn properties across the GrIS from 1980 through 2020. We use an identical forcing (Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2) atmospheric reanalysis) for SNOWPACK and the CFM-GSFC in order to isolate firn model differences. To evaluate the models, we compare simulated firn properties, including firn air content (FAC), to measurements from the Surface Mass Balance and Snow on Sea Ice Working Group (SUMup) dataset of snow and firn density. Both models perform well (mean absolute percentage errors of 14 % in SNOWPACK and 16 % in the CFM-GSFC), though their performance is hindered by the spatial resolution of the atmospheric forcing. In the ice-sheet-wide simulations, the 1980–1995 average spatially integrated FAC (i.e., air volume in the firn) for the upper 100 m is 34 645 km 3 from SNOWPACK and 28 581 km 3 from the CFM-GSFC. The discrepancy in the magnitude of the modeled FAC stems from differences in densification with depth and variations in the sensitivity of the models to atmospheric forcing. In more recent years (2005–2020), both models simulate substantial depletion of pore space. During this period, the spatially integrated FAC across the entire GrIS decreases by 3.2 % (−66.6 km 3 yr −1 ) in SNOWPACK and 1.5 % (−17.4 km 3 yr −1 ) in the CFM-GSFC. These differing magnitudes demonstrate how model differences propagate throughout the FAC record. Over the full modeled record (1980–2020), SNOWPACK simulates a loss of pore space equivalent to 3 mm of sea level rise buffering, while the CFM-GSFC simulates a loss of 1 mm. The greatest depletion in FAC is along the margins and especially along the western margin where observations and models show the formation of near-surface, low-permeability ice slabs that may inhibit meltwater storage.

Megan Thompson-Munson↗

NASA NTRS2023

A Surface Radiation Balance Data Set from Siple Dome in West Antarctica for Atmospheric and Climate Model Evaluation

A field campaign at Siple Dome in West Antarctica during the austral summer 2019-2020 offers an opportunity to evaluate climate model performance, particularly cloud microphysical simulation. Over Antarctic ice sheets and ice shelves, clouds are a major regulator of the surface energy balance, and in the warm season their presence occasionally induces surface melt that can gradually weaken an ice shelf structure. This dataset from Siple Dome, obtained using transportable and solar-poweredequipment, includes surface energy balance measurements, meteorology and cloud remote sensing. To demonstrate how these data can be used to evaluate model performance, comparisons are made with meteorological reanalysis known to give generally good performance over Antarctica (ERA5). Surface albedo measurements show expected variability with observed cloud amount, and can be used to evaluate a model's snowpack parameterization. One case study discussed involves a squall with northerly winds, during which ERA5 fails to produce cloud cover throughout one of the days. A second case study illustrates how shortwave spectroradiometer measurements that encompass the 1.6-micron atmospheric window reveal cloud phase transitions associated with cloud lifecycle. Here, continuously precipitating mixed-phase clouds become mainly liquid water clouds from local morning through the afternoon, not reproduced by ERA5. We challenge researchers to run their various regional or global models in a manner that has the large-scale meteorology follow the conditions of this field campaign, compare cloud and radiation simulations with this Siple Dome dataset, and potentially investigate why cloud microphysical simulations or other model components might produce discrepancies with these observations.

cloud remote sensing↗

NASA NTRSDate not supplied

Near Real Time Air Quality Forecasts Using the NASA GEOS Model

This presentation provides an overview of NASA's Global Modeling and Assimilation Office (GMAO) high-resolution global forecast and reanalysis products for weather, aerosols, and air quality. The NASA Global Earth Observing System (GEOS) model radiatively coupled to GOCART aerosol module assimilates 2-dimensional column-integrated aerosol optical depth (AOD) at one wavelength (550 nm) in order to constrain the model's background AOD in order to have the best historical estimate and forecasts of AOD and particulate matter. Furthermore, the GEOS model has been expanded to provide global near-real-time 5-day forecasts of atmospheric composition at unprecedented horizontal resolution of 0.25 degrees (~25 km). This composition forecast system (GEOS-CF) combines the operational GEOS weather forecasting model with the state-of-the-science GEOS-Chem chemistry module (version 12) to provide detailed analysis of a wide range of air pollutants such as ozone, carbon monoxide, nitrogen oxides, and fine particulate matter (PM2.5).

K Emma Knowland↗

NASA NTRSDate not supplied

Near Real Time Air Quality Forecasts Using the NASA GEOS Model

K Emma Knowland↗

NASA NTRSDate not supplied

Implementation of A New Microwave Scattering Database and A Forward Model for Active Microwave Sensors in CRTM

Radiative transfer models are extensively used for the assimilation of satellite observations into NWP models as well as retrieving geophysical products from satellite measurements. CRTM is a community model developed by NOAA JCSDA and widely used for different purposes requiring RT calculations. CRTM requires bulk scattering lookup tables in order to perform all-sky RT calculations. However, the current CRTM lookup tables for microwave frequencies were generated based on the Mie theory by assuming spherical frozen particles. The scattering lookup tables generated using the DDA technique has shown to largely improve the RT scattering calculations in the MW region. This presentation targets (i) the implementation and validation of a DDA database that was originally developed for the ARTS RT model into CRTM, and (ii) developing the CRTM active sensor module that takes advantage of the backscattering coefficients computed using the DDA method. The DDA database only provides single scattering properties of different habits, while CRTM requires bulk scattering properties. The CRTM cloud coefficients were previously generated based on the effective radius for representing the size of the particles. However, effective radius is neither measurable nor provided by the NWP models, thus need to be estimated from other geophysical variables such as water content. Therefore, in addition to calculating the CRTM bulk scattering properties from the DDA single scattering database, the CRTM was also largely modified to use cloud water content (kg.m-3), instead of effective radius, for performing the interpolation over size/mass of the particles. CRTM already requires water content as input, thus no extra variables are required for performing scattering calculations using the new ARTS DDA database. The CRTM scattering modules search for effective radius in cloud coefficient files and will use the cloud water content if the effective radius dimension is not found in the cloud coefficient files. Figure 1 shows the CRTM simulated brightness temperatures computed using different cloud coefficients versus ATMS observed values over Hurricane Irma on September 7, 2017 at 18:00 UTC. We used all the cloud water content values included in ERA5 with default CRTM/DDA habits for water, rain, snow, ice, hail, and graupel. ERA5 does not provide separate water content values for ice, hail, and graupel, thus the ice water content values were divided between ice, hail, and graupel clouds similar to what was explained in the previous section. In channels with a frequency lower than 90 GHz, emission from water and rain clouds can compensate for cloud scattering so that cloud contaminated Tbs are larger than corresponding clear sky Tbs. The DDA simulations for channels 1-7 largely perform better than the Mie simulations. The DDA simulations show a mix of small negative and positive simulated minus observed values, while the Mie results show large negative biases. The weighting functions for some of the ATMS temperature sounding channels (channels 9-15) peak mostly above the clouds, therefore the measured Tbs become less sensitive to clouds so that the results of both Mie and DDA become very similar. The Mie lookup tables generate excessive scattering for channel 16, but not enough scattering for the water vapor channels. In the specific case of Hurricane Maria, the DDA lookup tables do not generate enough scattering for channel 16, but the DDA results are much more consistent with observations for water vapor channels than for channel 16. It should be noted that the results may vary if we use other habits to represent snow, hail, and graupel in the DDA simulations. Although these results clearly show the advantage of the DDA database over the Mie dataset, different error sources such as error in the observations, displacement of clouds in the ERA5 reanalysis, and also lack of convective clouds or in general errors in the input atmospheric and cloud profiles contribute to the differences between the simulated and observed values. Aside from the improvements in the simulations, a major advantage of the new dataset is a large number of habits that can be used to tune the data assimilation systems to perform well in different weather conditions.

Isaac Moradi↗

NASA NTRS2023

Lifetimes of Overshooting Convective Events using High-Frequency Gridded Radar Composites

Deep convection that penetrates the tropopause, referred to here as overshooting convection, is capable of lifting tropospheric air well into the stratosphere. In addition to water, these overshoots also transport various chemical species, affecting chemistry and radiation in the stratosphere. It is not currently known, however, how much transport is a result of this mechanism. To better understand overshooting convection, this study aims to characterize the durations of overshooting events. To achieve this, radar data from the Next Generation Weather Radar (NEXRAD) network is composited onto a three-dimensional grid at 5-min intervals. Overshoots are identified by comparing echo-top heights with tropopause estimates derived from ERA5 reanalysis data. These overshoots are linked in space from one analysis time to the next to form tracks. This process is performed for 12 four-day sample windows in the months May–August of 2017–19. Track characteristics such as duration, overshoot area, tropopause-relative altitude, and column-maximum reflectivity are investigated. Positive correlations are found between track duration and other track characteristics. Integrated track volume is found as a product of the overshoot area, depth, and duration, and provides a measure of the potential stratospheric impact of each track. Short-lived tracks are observed to contribute the most total integrated volume when considering track duration, while tracks that overshoot by 2–3 km show the largest contribution when considering overshoot depth. A diurnal cycle is observed, with peak track initiation around 1600–1700 local time. Track-mean duration peaks a few hours earlier, while track-mean area and tropopause-relative height peak a few hours later.

Atmosphere↗

NASA NTRSDate not supplied

Hunga Tonga-Hunga Ha’apai Water Vapour and Composition of the Stratospheric Polar Vortices

We investigate the impacts of water vapor from the Hunga Tonga-Hunga Ha'apai (HTHH) eruption on the Antarctic stratospheric vortices in 2022 and 2023 and the Arctic stratospheric vortex in 2022/2023. Trace gas abundances from the Aura Microwave Limb Sounder (MLS) and the Modern Era Retrospective-analysis for Research and Applications (MERRA-2) Stratospheric Composition REanalysis with Aura MLS (M2-SCREAM), along with meteorological fields from the longer MERRA-2 record, are used to detail the evolution of the stratospheric polar vortex and its composition during these winter/spring seasons. Through austral winter and spring 2022, HTHH water vapor was effectively excluded from the Antarctic vortex until it broke up. The 2022 Antarctic vortex itself was large, strong, and long-lived, but not exceptionally so. By austral fall 2023, HTHH stratospheric water vapor had spread globally, and Antarctic vortex values in the lower through middle stratosphere were over 2 ppmv higher than usual when the vortex formed; these record-shattering water vapor concentrations led to earlier polar stratospheric cloud formation and chlorine activation, especially at levels that are typically the highest altitudes for polar processing. In the 2022/2023 Arctic winter/spring, HTHH water vapor reached the Arctic vortex region after the vortex had formed and was largely excluded until a major sudden stratospheric warming in mid-February 2023 eroded the vortex and mixed midlatitude and vortex air throughout the hemisphere.

Gloria L Manney↗

NASA NTRSDate not supplied

Regional Impacts of Ice Sheet Surface Representation Improvements in an Earth System Model

Ice sheet surface conditions and their subsequent impact on surface mass balance play an important role in ice sheet dynamics and ice sheet interaction with the overlying atmosphere and surrounding ocean. The NASA Global Modeling and Assimilation Office’s (GMAO) Goddard Earth Observing System (GEOS) ecosystem of models and reanalyses model ice sheet and glacier surface mass balance with a moderately complex snow and ice module, including prognostic surface albedo evolution, fractional snow cover, and snowpack hydrology and meltwater retention. With this configuration, Greenland near surface air temperatures and ice sheet melt are well represented in MERRA-2, GMAO’s current atmospheric reanalysis; however, the similarity to observations in some regions is due, in part, to compensating biases in surface energy budget. Recent improvements to GEOS’ cloud microphysics and longwave radiation parameterizations reduced biases in surface net longwave radiation and exacerbated surface net shortwave radiation biases, effectively increasing near surface temperatures and melting, particularly during the summer months. Here, we demonstrate the Earth system response to an improved representation of the ice sheet surface focused on minimizing the surface energy biases and increasing spatial and temporal representativeness. New changes to the surface albedo parameterization, including the introduction of a prognostic aerosol darkening scheme, help mitigate shortwave biases, while modifications to surface roughness characteristics improve near surface sensible heat fluxes. Focusing on the Arctic and Greenland, we examine the combined impact on these changes on regional weather conditions and ice sheet surface mass balance using a high resolution atmospheric only experiment, and we use a coupled model configuration to assess the impact on oceanic conditions and subseasonal-to-seasonal prediction. Overall, these improvements increase modeled ice sheet surface realism and provide a strong basis for more accurate ice sheet mass balance in GMAO’s future reanalyses and forecasting systems.

Lauren C Andrews↗

NASA NTRSDate not supplied

GEOS Constituent Data Assimilation beyond Aura MLS: Assimilating NASA SAGE III/ISS profiles of stratospheric water vapor

Water vapor in the lower stratosphere is an important trace gas for atmospheric chemistry and radiative budget with direct impact on climate. During the last quarter of the 20th century, the Stratospheric Aerosol and Gas Experiment (SAGE) missions were crucial in monitoring the stratospheric ozone loss and the subsequent recovery as well as trends in water vapor linked to surface temperature trends. The SAGE III instrument aboard the International Space Station (ISS) continues the SAGE mission record, with high vertical resolution profiles of water vapor (and other constituents) since mid-2017. The NASA GEOS Earth system model has the capability to assimilate multi-constituents from ground and space-based instruments using the GEOS Constituent Data Assimilation System (CoDAS). Reanalysis products of stratospheric water vapor without data constraints are historically poor, and two recent reanalyses which assimilated stratospheric constituents observed by the Microwave Limb Sounder (MLS) improve the representation of stratospheric composition, including water vapor, when compared against independent observations. The MLS instrument is on NASA's Aura satellite which is expected to be decommissioned in the coming years. Here we demonstrate that while the number of solar occultation observations a day from SAGE III/ISS is about 1 % of the total number of profiles observed globally by MLS, the chemical timescales of water vapor in the lower stratosphere are long enough that the SAGE III/ISS data can provide a useful constraint on the assimilated product. Analyzed water vapor fields from assimilating only SAGE III/ISS water vapor profiles agree well with independent stratospheric observations, including when compared against the frost-point hygrometers at the three NOAA stations. Over the five-year period from 2017 through 2022, the analyzed water vapor using SAGE III/ISS captures many of the features seen with the assimilation of MLS observations. Note, this ability is reduced over regions where the SAGE III/ISS instrument provides infrequent or no observations (associated with the orbit of the ISS), as highlighted in the case study period following the eruption of the tropical underwater volcano Hunga Tonga in early 2022. Nevertheless, there is a clear benefit to the assimilation of stratospheric water vapor from SAGE III/ISS observations, allowing us to continue to monitor stratospheric composition for climate assessments following the impending loss of Aura.

K. Emma Knowland↗

NASA NTRS2022

Summer Greenland Blocking Diversity and Its Impact on the Surface Mass Balance of the Greenland Ice Sheet

The increase in Greenland Ice Sheet (GrIS) surface runoff since the turn of the century has been linked to a rise in Greenland blocking frequency. However, a range of synoptic patterns can be considered blocked flow and efforts that summarize all blocking types indiscriminately likely fail to capture consequential differences in GrIS response. To account for these differences, we employ ERA5 reanalysis to identify summer blocking using two independent blocking metrics: the Greenland Blocking Index (GBI) and the blocking index of Pelly and Hoskins (2003, https://doi.org/10.1175/1520-0469(2003)060<0743:ANPOB>2.0.CO;2). We then conduct a self-organizing map analysis to objectively classify synoptic conditions during Greenland blocking episodes and identify three primary blocking types: (a) a high-amplitude Omega block, (b) a lower-amplitude, stationary summer ridge, and (c) a cyclonic wave breaking pattern. Using Modèle Atmosphérique Régional output, we document the spatiotemporal progression of the surface energy and mass balance for each blocking type. Relative to all blocking episodes, summer ridge patterns produce more melt over the southern ice sheet, Omega blocks produce more melt across the northern ice sheet, and cyclonic wave breaking patterns produce more melt in northeast Greenland. Our results indicate that the recent trend in summer Greenland blocking was largely driven by an increase in Omega patterns and suggest that Omega blocks have played a central role in the recent acceleration of GrIS mass loss. Furthermore, the GBI exhibited a relative bias toward Omega patterns, which may help explain why it has measured stronger trends in summer Greenland blocking than other blocking metrics.

atmospheric blocking↗

NASA NTRSDate not supplied

The Seasonal Evolution of Atmospheric Vertical Structure of Smoke and Humidity Over the Southeast Atlantic Biomass Burning Region

The atmosphere over the southeast Atlantic Ocean (SEA) sees a consistent springtime biomass burning (BB) smoke from widespread agricultural fires on the African continent. This smoke layer is initially lofted high in a continental mixed layer (~5-6km) and is then transported westward in the free troposphere, where it overlies and ultimately mixes into the SEA stratocumulus-topped oceanic boundary layer. Coincident with this smoke is an elevated humidity signal which is present from the time a given airmass is over the continental source region; this correlation is persistent through the biomass burning season, although varying through the course of the season. ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) was a NASA Earth Venture Suborbital mission with the goal of measuring aerosol, cloud, and atmospheric properties over this region during three deployments in September 2016, August 2017, and October 2018. We use the ORACLES observations to assess this smoke-vapor relationship. First, we discuss the good agreement between the airborne ORACLES dataset and the ECMWF ERA5 and CAMS reanalyses, as well as results from NASA’s MERRA-2, as seen over the three deployment years. We then use the reanalyses to develop a framework in which to understand more broadly the radiative and dynamical interactions between the elevated smoke and water vapor over the SEA through the biomass burning season, beyond the three ORACLES observation periods. Looking at seven years of reanalysis data for the BB season, we find distinct variations between each month/deployment in terms of vertical smoke distribution and correlation to atmospheric specific humidity, due to changing conditions through the BB season. Using k-means clustering of these climatological reanalyses, we identify six canonical atmospheric profile types of varying total atmospheric humidity and vertical structure and describe their changing incidence spatially and throughout the season, and six analogous profile types for carbon monoxide, allowing us to characterize the atmospheric structure of both vapor and BB over time throughout the SEA region. The radiative heating of both aerosol and water vapor has potential to influence the cloud-top entrainment and atmospheric turbulence, thus modifying the underlying stratocumulus cloud properties. We next discuss how these smoke-humidity variations influence both the low-cloud fraction (as observed by MODIS and VIIRS, and output by ERA5) and the boundary layer height in the region. This classification will ultimately allow for a more complete analysis of the broader radiative and dynamical effects of humid aerosols overlying stratocumulus clouds.

Kristina Marie Myers Pistone↗

NASA NTRSDate not supplied

The Impact of Large Scale Atmospheric and Cyclone Variability on the Sea-Ice Edge in the Labrador Sea

We study the temporal variability of the wintertime Labrador Sea ice area. The driving factors of these intraseasonal and interannual variations are related to large scale atmospheric variability and cyclone variability both of which can be characterized by the Arctic Oscillation (AO) index. We observe negative trends in the maximum sea-ice area over the past 40 years, and a positive correlation between the AO index and Labrador Sea ice area. Using satellite-derived daily ice area along with reanalysis-derived cyclones, turbulent flux, wind, humidity, air and sea temperature fields, we delve into the physical coupling mechanisms by which cyclones influence the position of the ice edge in the Labrador Sea throughout the winter.

Sea ice↗

NASA NTRSDate not supplied

The Impact of Dry Intrusions on Midlatitude Cold-Air Outbreak Cloud Transitions

Cold-air outbreaks (CAOs) form marine boundary layer (MBL) clouds that undergo rapid overcast-to-broken cloud regime transitions, initiated by substantial rain. CAOs are usually accompanied by dry intrusions (DIs) that subside as free-tropospheric (FT) air into the postfrontal sector of mid-latitude storms. For an exemplary cold-air outbreak in the NW Atlantic that showed faster transitions (corresponding to reduced extents of overcast clouds) closer to the low-pressure system, we posit that varying transitions are caused by an uneven meteorological pattern imposed by the prevailing DI. We compile satellite observations, reanalysis fields, and Lagrangian large-eddy simulations (LES) translating along MERRA2-based trajectories to show that postfrontal trajectories closer to the low-pressure system are uniquely favorable to rain formation (and, thus, cloud transitions) as they show (1) weaker FT subsidence rates, (2) greater FT humidity, (3) greater MBL windspeeds, and (4) a colder MBL as well as reduced lower-tropospheric stability. We present an updated conceptual view of postfrontal cloud formation that may guide future investigations.

Cold-air outbreaks↗