Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

A Multicatalytic Approach to the Hydroaminomethylation of α‐Olefins

Abstract We report an approach to conducting the hydroaminomethylation of diverse α‐olefins with a wide range of alkyl, aryl, and heteroarylamines at relatively low temperatures (70–80 °C) and pressures (1.0–3.4 bar) of synthesis gas. This approach is based on simultaneously using two distinct catalysts that are mutually compatible. The hydroformylation step is catalyzed by a rhodium diphosphine complex, and the reductive amination step, which is conducted as a transfer hydrogenation with aqueous, buffered sodium formate as the reducing agent, is catalyzed by a cyclometallated iridium complex. By adjusting the ratio of CO to H 2 , we conducted the reaction at one atmosphere of gas with little change in yield. A diverse array of olefins and amines, including hetreroarylamines that do not react under more conventional conditions with a single catalyst, underwent hydroaminomethylation with this new system, and the pharmaceutical ibutilide was prepared in higher yield and under milder conditions than with a single catalyst.

Hanna, Steven↗

The Nature of Hydrogen Adsorption on Platinum in the Aqueous Phase

Abstract The thermodynamic state of H 2 adsorbed on Pt in the aqueous phase was determined by kinetic analysis of H 2 reacting with D 2 O to HDO, HD, and D 2 , and by DFT‐based ab initio molecular dynamics simulations of H 2 adsorption on Pt(111), Pt(110), and Pt nanoparticles. Dissociative adsorption of H 2 on Pt is significantly weakened in the aqueous phase compared to adsorption at gas–solid interfaces. Water destabilizes the adsorbed H atoms, decreasing the heat of adsorption by 19–22 kJ while inducing an additional entropy loss of 50–70 J K −1 . Upon dissociative adsorption of H 2 , the average distance of water from the Pt surface increases and the liquid adopts a structure that is more ordered than before close to the Pt surface, which limits the translation mobility of the adsorbed H atoms. The presence of hydrated hydronium ions next to the Pt surface further lowers the H−Pt bond strength.

Yang, Guoju↗

Revealing the Distribution of Metal Carboxylates in Oil Paint from the Micro‐ to Nanoscale

Abstract Oil paints comprise pigments, drying oils, and additives that together confer desirable properties, but can react to form metal carboxylates (soaps) that may damage artworks over time. To obtain information on soap formation and aggregation, we introduce a new tapping‐mode measurement paradigm for the photothermal induced resonance (PTIR) technique that enables nanoscale IR spectroscopy and imaging on highly heterogenous and rough paint thin sections. PTIR is used in combination with μ‐computed tomography and IR microscopy to determine the distribution of metal carboxylates in a 23‐year old oil paint of known formulation. Results show that heterogeneous agglomerates of Al‐stearate and a Zn‐carboxylate complex with Zn‐stearate nano‐aggregates in proximity are distributed randomly in the paint. The gradients of zinc carboxylates are unrelated to the Al‐stearate distribution. These measurements open a new chemically sensitive nanoscale observation window on the distribution of metal soaps that can bring insights for understanding soap formation in oil paint.

Ma, Xiao↗

The Unexpected Role of Se VI Species in Epoxidations with Benzeneseleninic Acid and Hydrogen Peroxide

Abstract Benzeneperoxyseleninic acid has been proposed as the key intermediate in the widely used epoxidation of alkenes with benzeneseleninic acid and hydrogen peroxide. However, it reacts sluggishly with cyclooctene and instead rapidly decomposes in solution to a mixed selenonium–selenonate salt that was identified by X‐ray absorption and 77 Se NMR spectroscopy, as well as by single crystal X‐ray diffraction. This process includes a selenoxide elimination of the peroxyseleninic acid with liberation of oxygen and additional redox steps. The salt is relatively stable in the solid state, but generates the corresponding selenonic acid in the presence of hydrogen peroxide. The selenonic acid is inert towards cyclooctene on its own; however, rapid epoxidation occurs when hydrogen peroxide is added. This shows that the selenonic acid must first be activated through further oxidation, presumably to the heretofore unknown benzeneperoxyselenonic acid. The latter is the principal oxidant in this epoxidation.

Sands, Kai N.↗

From K‐O 2 to K‐Air Batteries: Realizing Superoxide Batteries on the Basis of Dry Ambient Air

Abstract Although using an air cathode is the goal for superoxide‐based potassium‐oxygen (K‐O 2 ) batteries, prior studies were limited to pure oxygen. Now, the first K‐air (dry) battery based on reversible superoxide electrochemistry is presented. Spectroscopic and gas chromatography analyses are applied to evaluate the reactivity of KO 2 in ambient air. Although KO 2 reacts with water vapor and CO 2 to form KHCO 3 , it is highly stable in dry air. With this knowledge, rechargeable K‐air (dry) batteries were successfully demonstrated by employing dry air cathode. The reduced partial pressure of oxygen plays a critical role in boosting battery lifespan. With a more stable environment for the K anode, a K‐air (dry) battery delivers over 100 cycles (>500 h) with low round‐trip overpotentials and high coulombic efficiencies as opposed to traditional K‐O 2 battery that fails early. This work sheds light on the benefits and restrictions of employing the air cathode in superoxide‐based batteries.

Qin, Lei↗

Naphthalene‐Diimide‐Based Ionenes as Universal Interlayers for Efficient Organic Solar Cells

Abstract Self‐doping ionene polymers were efficiently synthesized by reacting functional naphthalene diimide (NDI) with 1,3‐dibromopropane ( NDI‐NI ) or trans ‐1,4‐dibromo‐2‐butene ( NDI‐CI ) via quaternization polymerization. These NDI‐based ionene polymers are universal interlayers with random molecular orientation, boosting the efficiencies of fullerene‐based, non‐fullerene‐based, and ternary organic solar cells (OSCs) over a wide range of interlayer thicknesses, with a maximum efficiency of 16.9 %. NDI‐NI showed a higher interfacial dipole (Δ), conductivity, and electron mobility than NDI‐CI , affording solar cells with higher efficiencies. These polymers proved to efficiently lower the work function ( WF ) of air‐stable metals and optimize the contact between metal electrode and organic semiconductor, highlighting their power to overcome energy barriers of electron injection and extraction processes for efficient organic electronics.

Liu, Ming↗

Synthesis of Ln II ‐in‐Cryptand Complexes by Chemical Reduction of Ln III ‐in‐Cryptand Precursors: Isolation of a Nd II ‐in‐Cryptand Complex

Abstract Lanthanide triflates have been used to incorporate Nd III and Sm III ions into the 2.2.2‐cryptand ligand (crypt) to explore their reductive chemistry. The Ln(OTf) 3 complexes (Ln=Nd, Sm; OTf=SO 3 CF 3 ) react with crypt in THF to form the THF‐soluble complexes [Ln III (crypt)(OTf) 2 ][OTf] with two triflates bound to the metal encapsulated in the crypt. Reduction of these Ln III ‐in‐crypt complexes using KC 8 in THF forms the neutral Ln II ‐in‐crypt triflate complexes [Ln II (crypt)(OTf) 2 ]. DFT calculations on [Nd II (crypt)] 2+ ], the first Nd II cryptand complex, assign a 4f 4 electron configuration to this ion.

Huh, Daniel N.↗

Cross‐Coupling between Hydrazine and Aryl Halides with Hydroxide Base at Low Loadings of Palladium by Rate‐Determining Deprotonation of Bound Hydrazine

Abstract Reported here is the Pd‐catalyzed C–N coupling of hydrazine with (hetero)aryl chlorides and bromides to form aryl hydrazines with catalyst loadings as low as 100 ppm of Pd and KOH as base. Mechanistic studies revealed two catalyst resting states: an arylpalladium(II) hydroxide and arylpalladium(II) chloride. These compounds are present in two interconnected catalytic cycles and react with hydrazine and base or hydrazine alone to give the product. The selectivity of the hydroxide complex with hydrazine to form aryl over diaryl hydrazine was lower than that of the chloride complex, as well as the catalytic reaction. In contrast, the selectivity of the chloride complex closely matched that of the catalytic reaction, indicating that the aryl hydrazine is derived from this complex. Kinetic studies showed that the coupling process occurs by rate‐limiting deprotonation of a hydrazine‐bound arylpalladium(II) chloride complex to give an arylpalladium(II) hydrazido complex.

Wang, Justin Y.↗

Electrochemically Triggered Chain Reactions for the Conversion of Furan Derivatives

Abstract We report an electrochemical method for coupling biomass‐derived C5/C6 compounds to value‐added fuel precursors. Using only 2 % of equivalent charges, 2‐methylfuran (2‐MF) was oxidized to yield a cation radical, which readily reacted with 3‐hexene‐2,5‐dione, a derivate of 2,5‐dimethylfuran, to produce 3‐(5‐methylfuran‐2‐yl)hexane‐2,5‐dione. The product was converted to 4‐ethylnonane (a component of biodiesel/jet fuel) in a single step in excellent yield. Importantly, the reaction was not sensitive to oxygen, and a trace amount of water was found to promote the reaction. Detailed mechanistic studies confirmed the proposed reaction pathways. Key to the mechanism is the radical generation that is enabled by electrochemistry. The radical is regenerated at the end of a reaction cycle to ensure chain propagation for an average of ca. 47 times, resulting in an apparent Faradaic efficiency of 4700 %.

Chen, Rong↗

Solvated Nickel Complexes as Stoichiometric and Catalytic Perfluoroalkylation Agents**

Abstract The acetonitrile‐solvated [(MeCN)Ni(C 2 F 5 ) 3 ] − was prepared in order to compare and contrast its reactivity with the known [(MeCN)Ni(CF 3 ) 3 ] − towards organic electrophiles. Both [(MeCN)Ni(CF 3 ) 3 ] − and [(MeCN)Ni(C 2 F 5 ) 3 ] − successfully react with aryl iodonium and diazonium salts as well as alkynyl iodonium salts to give fluoroalkylated organic products. Electrochemical analysis of [(MeCN)Ni II (C 2 F 5 ) 3 ] − suggests that, upon electro‐oxidation to [(MeCN) n Ni III (C 2 F 5 ) 3 ], reductive homolysis of a perfluoroethyl radical occurs, with the concomitant formation of [(MeCN) 2 Ni II (C 2 F 5 ) 2 ]. Catalytic C−H trifluoromethylations of electron‐rich arenes were successfully achieved using either [(MeCN)Ni(CF 3 ) 3 ] − or the related [Ni(CF 3 ) 4 ] 2− . Stoichiometric reactions of the solvated nickel complexes reveal that “ligandless” nickel is exceptionally capable of serving as reservoir of CF 3 groups under catalytically relevant conditions.

Shreiber, Scott T.↗

Phase Transfer‐Mediated Degradation of Ether‐Based Localized High‐Concentration Electrolytes in Alkali Metal Batteries

Abstract Localized high‐concentration electrolytes (LHCEs) have attracted interest in alkali metal batteries due to the advantages of forming stable solid‐electrolyte interphases (SEIs) on anodes and good chemical/electrochemical stability. Herein, a new degradation mechanism is revealed for ether‐based LHCEs that questions their compatibility with alkali metal anodes (Li, Na, and K). Specifically, the ether solvent reacts with alkali metals to generate solvated electrons (e s − ) that attack hydrofluoroether co‐solvents to form a series of byproducts. The ether solvent essentially acts as a phase‐transfer reagent that continuously transfers electrons from solid‐phase metals into the solution phase, thus inhibiting the formation of stable SEI and leading to continuous alkali metal corrosion. Switching to an ester‐based solvating solvent or intercalation anodes such as graphite or molybdenum disulfide has been shown to avoid such a degradation mechanism due to the absence of e s − .

Chen, Xiaojuan↗

High‐Performance Lithium Metal Batteries Enabled by a Fluorinated Cyclic Ether with a Low Reduction Potential

Abstract Electrolyte engineering is crucial for developing high‐performance lithium metal batteries (LMB). Here, we synthesized two cosolvents methyl bis(fluorosulfonyl)imide (MFSI) and 3,3,4,4‐tetrafluorotetrahydrofuran (TFF) with significantly different reduction potentials and add them into LiFSI‐DME electrolytes. The LiFSI/TFF‐DME electrolyte gave an average Li Coulombic efficiency (CE) of 99.41 % over 200 cycles, while the average Li CEs for MFSI‐based electrolyte is only 98.62 %. Additionally, the TFF‐based electrolytes exhibited a more reversible performance than the state‐of‐the‐art fluorinated 1,4‐dimethoxylbutane electrolyte in both Li||Cu half‐cell and anode‐free Cu||LiNi 0.8 Mn 0.1 Co 0.1 O 2 full cell. More importantly, the decomposition product from bis(fluorosulfonyl)imide anion could react with ether solvent, which destroyed the SEI, thus decreasing cell performance. These key discoveries provide new insights into the rational design of electrolyte solvents and cosolvents for LMB.

Wu, Min↗

Unconventional Pathway in the Gas‐Phase Synthesis of 9 H ‐Fluorene (C 13 H 10 ) via the Radical–Radical Reaction of Benzyl (C 7 H 7 ) with Phenyl (C 6 H 5 )

Abstract The simplest polycyclic aromatic hydrocarbon (PAH) carrying a five‐membered ring—9 H ‐fluorene (C 13 H 10 )—is produced isomer‐specifically in the gas phase by reacting benzyl (C 7 H 7 ⋅) with phenyl (C 6 H 5 ⋅) radicals in a pyrolytic reactor coupled with single photon ionization mass spectrometry. The unconventional mechanism of reaction is supported by theoretical calculations, which first produces diphenylmethane and unexpected 1‐(6‐methylenecyclohexa‐2,4‐dienyl)benzene intermediates (C 13 H 12 ) accessed via addition of the phenyl radical to the ortho position of the benzyl radical. These findings offer convincing evidence for molecular mass growth processes defying conventional wisdom that radical‐radical reactions are initiated through recombination at their radical centers. The structure of 9 H ‐fluorene acts as a molecular building block for complex curved nanostructures like fullerenes and nanobowls providing fundamental insights into the hydrocarbon evolution in high temperature settings.

He, Chao↗

Metal-Organic Frameworks Incorporating Copper-Complexed Rotaxanes

MOFs on the move: A copper-coordinated [2]pseudorotaxanate which reacts with zinc nitrate to form threefold interpenetrated networks retains most of its solution-state chemistry, including its ability to undergo electronic switching of some of the copper(I) ions under redox control.

Coskun, Ali↗

Highly dispersed SiO x /Al 2 O 3 catalysts illuminate the reactivity of isolated silanol sites

The reaction of γ-alumina with tetraethylorthosilicate (TEOS) vapor at low temperatures selectively yields monomeric SiO x species on the alumina surface. These isolated (-AlO) 3 Si(OH) sites are characterized by PXRD, XPS, DRIFTS of adsorbed NH 3 , CO, and pyridine, and 29 Si and 27 Al DNP-enhanced solid-state NMR spectroscopy. The formation of isolated sites suggests that TEOS reacts preferentially at strong Lewis acid sites on the γ-Al 2 O 3 surface, functionalizing the surface with “mild” Brønsted acid sites. As a result, for liquid-phase catalytic cyclohexanol dehydration, these SiO x sites exhibit up to 3.5-fold higher specific activity than the parent alumina with identical selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cooperative Cluster Metalation and Ligand Migration in Zirconium Metal–Organic Frameworks

Abstract Cooperative cluster metalation and ligand migration were performed on a Zr‐MOF, leading to the isolation of unique bimetallic MOFs based on decanuclear Zr 6 M 4 (M=Ni, Co) clusters. The M 2+ reacts with the μ 3 ‐OH and terminal H 2 O ligands on an 8‐connected [Zr 6 O 4 (OH) 8 (H 2 O) 4 ] cluster to form a bimetallic [Zr 6 M 4 O 8 (OH) 8 (H 2 O) 8 ] cluster. Along with the metalation of Zr 6 cluster, ligand migration is observed in which a Zr–carboxylate bond dissociates to form a M–carboxylate bond. Single‐crystal to single‐crystal transformation is realized so that snapshots for cooperative cluster metalation and ligand migration processes are captured by successive single‐crystal X‐ray structures. In 3+ was metalated into the same Zr‐MOF which showed excellent catalytic activity in the acetaldehyde cyclotrimerization reaction. This work not only provides a powerful tool to functionalize Zr‐MOFs with other metals, but also structurally elucidates the formation mechanism of the resulting heterometallic MOFs.

Yuan, Shuai↗

Dioxygen activation by non-adiabatic oxidative addition to a single metal center [O 2 activation by non-adiabatic oxidative addition to a single metal center]

A chromium(I) dinitrogen complex reacts rapidly with O 2 to form the mononuclear dioxo complex [Tp tBu,Me Cr V (O) 2 ] (Tp tBu,Me =hydrotris(3- tert -butyl-5-methylpyrazolyl)borate), whereas the analogous reaction with sulfur stops at the persulfido complex [Tp tBu,Me Cr III (S 2 )]. The transformation of the putative peroxo intermediate [Tp tBu,Me Cr III (O 2 )] (S= 3 / 2 ) into [Tp tBu,Me Cr V (O) 2 ] (S= 1 / 2 ) is spin-forbidden. The minimum-energy crossing point for the two potential energy surfaces has been identified. Finally, although the dinuclear complex [(Tp tBu,Me Cr) 2 (μ-O) 2 ] exists, mechanistic experiments suggest that O 2 activation occurs on a single metal center, by an oxidative addition on the quartet surface followed by crossover to the doublet surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Organolead Halide Perovskite Nanocrystals: Branched Capping Ligands Control Crystal Size and Stability

Abstract CH 3 NH 3 PbBr 3 perovskite nanocrystals (PNCs) of different sizes (ca. 2.5–100 nm) with high photoluminescence (PL) quantum yield (QY; ca. 15–55 %) and product yield have been synthesized using the branched molecules, APTES and NH 2 ‐POSS, as capping ligands. These ligands are sterically hindered, resulting in a uniform size of PNCs. The different capping effects resulting from branched versus straight‐chain capping ligands were compared and a possible mechanism proposed to explain the dissolution–precipitation process, which affects the growth and aggregation of PNCs, and thereby their overall stability. Unlike conventional PNCs capped with straight‐chain ligands, APTES‐capped PNCs show high stability in protic solvents as a result of the strong steric hindrance and propensity for hydrolysis of APTES, which prevent such molecules from reaching and reacting with the core of PNCs.

Luo, Binbin↗