Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Intergrown mica and montmorillonite in the Allende carbonaceous chondrite

High resolution transmission electron microscopy (HRTEM) observations were made of a mixture of mica and montmorillonite from fine-grained calcium, aluminum inclusions (CAI) in the Allende C3(V) meteorite. A petrographic thin section having a diameter of 4 mm contained CAI fragments ranging from less than 1 to 50 microns. The observed textural and chemical characteristics placed the inclusion in the fine-grained alkali-rich spinel aggregate category of Warks' (1979) classifications of CAIs and as type 3 in Kornacki's classifications of fine grains in Allende. Chemical analyses were performed on the phyllosilicate grains observed in the TEM scan by means of an X ray observed, and the proximity to the matrix boundary suggests a metamorphism which included aqueous alteration at a relatively low temperature.

Tomeoka, K.↗

Cracks in Glass Polymers Induced by Solvent Absorption

Combination of soluble particles and absorbed solvents cause polymer cracking. New failure mechanism in glassy polymers identified. Cracking caused by presence of particles insoluble in polymer matrix but soluble in solvent. Experiments performed and equations describe cracking phenomenon set forth in concise report.

Fedors, R. F.↗

Orbital and Geodetic Error Analysis

Results that previously required several runs determined in more computer-efficient manner. Multiple runs performed only once with GEODYN and stored on tape. ERODYN then performs matrix partitioning and linear algebra required for each individual error-analysis run.

Felsentreger, T.↗

Heat Transfer Characteristics of Regenerator Matrix (Case of Packed Wire Gauzes)

The average heat transfer coefficient in the matrix of laminated wire screens (10 to 250 mesh) for a Stirling engine heat exchanger was studied experimentally. The data are correlated by N sub ud = 0.42 R sub ed 0.56 (3 or = R sub ed or = 400), and R sub ed are the Nusselt and Reynolds nubmers based on the wire diameter. The pressure drop decreased and the heat transfer increased as the wire diameter was decreased.

Hamaguchi, K.↗

A finite element model for sound transmission through panels

A finite element method (FEM) is applied to predicting coupled frequencies and pressures within an acoustic cavity in order to characterize sound transmission through a panel. Structural equations of motion are defined and the FEM model is configured with four-noded plate elements, the lateral displacement and two slopes being the unknowns at every node. Each element then has 12 degrees of freedom (DOF) and the displacement variation is expressed by a 12-term nonconforming polynomial. A consistent mass matrix is used to represent the panel mass matrix and a wave equation governs the acoustic volume. Analysis of pressure and displacement over the panel yields a square coupling matrix, and an eigenanalysis leads to a solution of the forced vibration problem.

Ramakrishnan, J. V.↗

Theoretical models for polarimetric radar clutter

The Mueller matrix and polarization covariance matrix are described for polarimetric radar systems. The clutter is modeled by a layer of random permittivity, described by a three-dimensional correlation function, with variance, and horizontal and vertical correlation lengths. This model is applied, using the wave theory with Born approximations carried to the second order, to find the backscattering elements of the polarimetric matrices. It is found that 8 out of 16 elements of the Mueller matrix are identically zero, corresponding to a covariance matrix with four zero elements. Theoretical predictions are matched with experimental data for vegetation fields.

Borgeaud, M.↗

Model reduction for discrete bilinear systems

A model reduction method for discrete bilinear systems is developed which matches q sets of Volterra and covariance parameters. These parameters are shown to represent both deterministic and stochastic attributes of the discrete bilinear system. A reduced order model which matches these q sets of parameters is defined to be a q-Volterra covariance equivalent realization (q-Volterra COVER). An algorithm is presented which constructs a class of q-Volterra COVERs parameterized by solutions to a Hermitian, quadratic, matrix equation. The algorithm is applied to a bilinear model of a robot manipulator.

King, A. M.↗

Interfacial reactions in titanium/SCS fiber composites during fabrication

The objectrive of the study was to determine the effect of titanium concentration and different pyrocarbon fiber coatings on the morphology and the extent of fiber-matrix reactions in Ti/SiC composites fabricated by rapid infrared forming (RIF). It is found that the extent of fiber-matrix reactions in Ti/SiC composites fabricated by the RIF technique is noticeably affected by both an increase in Ti content and by the processing temperature. Uncoated SiC fibers extensively react with the titanium alloy matrix at 1200 C, whereas no reaction occurs when coated SiC fibers are used.

Warrier, S. G.↗

SXRF determination of trace elements in chondrule rims in the unequilibrated CO3 chondrite, ALH A77307

The concentrations of Ni, Cu, Zn, Ga, Ge, and Se in five chondrule rims in the CO3 chondrite ALH A77307 (3.0) using the synchrotron x-ray fluorescence (SXRF) microprobe at Brookhaven National Laboratory were determined. The data show that the trace element chemistry of rims on different chondrules is remarkably similar, consistent with data obtained for the major elements by electron microprobe. These results support the idea that rims are not genetically related to individual chondrules, but all sampled the same reservoir of homogeneously mixed dust. Of the trace elements analyzed Zn and Ga show depletions relative to CI chondrite values, but in comparison with bulk CO chondrites all the elements are enriched by approximately 1.5 to 3.5 x CO. The high concentrations of the highly volatile elements Se and Ga and moderately volatile Zn (1.5 to 2 x CO) in rims show that matrix is the major reservoir of volatile elements in ALH A77307.

Brearley, Adrian J.↗

North Alabama Lightning Mapping Array (LMA): VHF Source Retrieval Algorithm and Error Analyses

Two approaches are used to characterize how accurately the North Alabama Lightning Mapping Array (LMA) is able to locate lightning VHF sources in space and in time. The first method uses a Monte Carlo computer simulation to estimate source retrieval errors. The simulation applies a VHF source retrieval algorithm that was recently developed at the NASA Marshall Space Flight Center (MSFC) and that is similar, but not identical to, the standard New Mexico Tech retrieval algorithm. The second method uses a purely theoretical technique (i.e., chi-squared Curvature Matrix Theory) to estimate retrieval errors. Both methods assume that the LMA system has an overall rms timing error of 50 ns, but all other possible errors (e.g., multiple sources per retrieval attempt) are neglected. The detailed spatial distributions of retrieval errors are provided. Given that the two methods are completely independent of one another, it is shown that they provide remarkably similar results. However, for many source locations, the Curvature Matrix Theory produces larger altitude error estimates than the (more realistic) Monte Carlo simulation.

Koshak, W. J.↗

Calcium-stimulated autophosphorylation site of plant chimeric calcium/calmodulin-dependent protein kinase

The existence of two molecular switches regulating plant chimeric Ca(2+)/calmodulin-dependent protein kinase (CCaMK), namely the C-terminal visinin-like domain acting as Ca(2+)-sensitive molecular switch and calmodulin binding domain acting as Ca(2+)-stimulated autophosphorylation-sensitive molecular switch, has been described (Sathyanarayanan, P. V., Cremo, C. R., and Poovaiah, B. W. (2000) J. Biol. Chem. 275, 30417-30422). Here we report the identification of Ca(2+)-stimulated autophosphorylation site of CCaMK by matrix-assisted laser desorption ionization time of flight-mass spectrometry. Thr(267) was confirmed as the Ca(2+)-stimulated autophosphorylation site by post-source decay experiments and by site-directed mutagenesis. The purified T267A mutant form of CCaMK did not show Ca(2+)-stimulated autophosphorylation, autophosphorylation-dependent variable calmodulin affinity, or Ca(2+)/calmodulin stimulation of kinase activity. Sequence comparison of CCaMK from monocotyledonous plant (lily) and dicotyledonous plant (tobacco) suggests that the autophosphorylation site is conserved. This is the first identification of a phosphorylation site specifically responding to activation by second messenger system (Ca(2+) messenger system) in plants. Homology modeling of the kinase and calmodulin binding domain of CCaMK with the crystal structure of calcium/calmodulin-dependent protein kinase 1 suggests that the Ca(2+)-stimulated autophosphorylation site is located on the surface of the kinase and far from the catalytic site. Analysis of Ca(2+)-stimulated autophosphorylation with increasing concentration of CCaMK indicates the possibility that the Ca(2+)-stimulated phosphorylation occurs by an intermolecular mechanism.

Non-NASA Center↗

Encoders for block-circulant LDPC codes

Methods and apparatus to encode message input symbols in accordance with an accumulate-repeat-accumulate code with repetition three or four are disclosed. Block circulant matrices are used. A first method and apparatus make use of the block-circulant structure of the parity check matrix. A second method and apparatus use block-circulant generator matrices.

Divsalar, Dariush↗

Cellular reflectarray antenna and method of making same

A method of manufacturing a cellular reflectarray antenna arranged in an m by n matrix of radiating elements for communication with a satellite includes steps of determining a delay .phi.m,n for each of said m by n matrix of elements of said cellular reflectarray antenna using sub-steps of: determining the longitude and latitude of operation, determining elevation and azimuth angles of the reflectarray with respect to the satellite and converting theta.sub.0 (.theta..sub.0) and phi.sub.0 (.phi..sub.0), determining .DELTA..beta..sub.m,n, the pointing vector correction, for a given inter-element spacing and wavelength, determining .DELTA..phi..sub.m,n, the spherical wave front correction factor, for a given radius from the central element and/or from measured data from the feed horn; and, determining a delay .phi.m,n for each of said m by n matrix of elements as a function of .DELTA..beta..sub.m,n and .DELTA..phi..sub.m,n.

Romanofsky, Robert R↗

Using X-Ray Computed Tomography to Catalog Rock Fragments in Apollo Drive Tube 73002

Overview: The Apollo missions collected 382 kg of rock, regolith, and core samples from six locations on the nearside of the Moon. Approximately 84% by mass of the Apollo collection remains in pristine condition within the curation facility at Johnson Space Center (i.e., never allocated, continuously stored in dry-N2 purged cabinets, exposure history restricted to Teflon, stainless steel, and Al-metal). Although most Apollo samples have been well characterized, there are several types of samples that have remained wholly or largely unstudied since their return, and/or that have been cu-rated under special conditions, e.g., frozen samples, samples stored in He-purged environment, and previously unopened drive tubes. NASA solicited proposals for the Apollo Next Generation Sample Analysis Pro-gram (ANGSA), and 9 teams were selected to study a subset of the unopened and frozen samples [1]. The first sample opened as part of the ANGSA pro-gram was drive tube 73002. This was originally a ~30 cm long, 4 cm diameter drive tube collected on a land-slide deposit near Lara Crater at the Apollo 17 landing site. It was part of a ~60 cm long double drive tube collected, and the bottom half of the tube (73001) was sealed under vacuum on the Moon [2]. Prior to opening sample 73002, the sample was imaged with a high resolution X-ray Computed Tomography (XCT) scan of the entire tube [3], which provided invaluable information during the dissection process [4]. In addition to the pre-dissection XCT scans, individual >4 mm particles were separated from the 73002 regolith during processing and scanned at high resolution by XCT. Here we pre-sent the initial lithologic classification of 134 individual >4 mm rock fragments separated from the 73002 core during the dissection process. Methodology: Drive tube 73002 was manually dissected in 0.5 cm depth intervals in three passes (Fig. 1) [4,5]. Each interval from pass 1 and 2 was sieved to <1 mm and >1 mm size fractions, and >1 mm particles were further manually subdivided into 1-2, 2-4, 4-10, and >10 mm size fractions. Pass 3 was not sieved, but >10 mm clasts were separated manually. Each 4-10 mm and >10 mm fragment was individually weighed, triply bagged in Teflon, and scanned by XCT. There are 60 rock fragments in Pass 1, 64 rock fragments in Pass 2 (from the 4-10 mm and >10 mm size fractions), and 8 rock fragments from Pass 3 (>10 mm size fraction). Each individually bagged rock fragment was scanned using the 180 kV nano-focus transmission source on the Nikon XTH 320 XCT system at NASA Johnson Space Center [6]. Scanning conditions varied considerably for individual particles, in large part be-cause of the large variation in size (0.008-19.623 g). All scans fell within the following range of scan conditions: 2.8-20.6 um voxel size; 90-155 kV voltage; 18-39 uA current; 1891-3141 projections; and 902-2000 slices. Results and Discussion: The 132 rock fragments from sample 73002 fall into the following general cat-gories: agglutinates (n = 6); basalts (13); impact melts (5); impact melt breccias (IMB; 42); regolith breccias (62); and soil breccias (4); see Figure 2 for representative examples of each lithology. Within most of these broad lithologic groups are recognizable subgroups. For example, a significant portion of regolith breccia fragments contain some agglutinate-like glass (n = 9) or are dilithologic (7) because they contain a single large clast (~50% or more by volume). Subgroups can be based on similarities to previously identified lunar lithologies, such as high-Ti basalts (9) and VLT basalts (4; Fig. 3), or based on commonly seen features within the fragments, such as poikilitic ilmenite IMB (10), ilmenite-lath IMB (12), or vesicular IMB (11) “groups”. Particles in the same “group” are not necessarily intended to be genetically related, but rather identify particles that are similar and that follow-up studies can classify in more detail [7]. Conclusion: Identification of lithologies based on XCT is a powerful tool, but a more absolute classification will sometimes require additional textural information from thin sections (e.g., glassy-matrix regolith vs. impact-melt vs. granulitic breccia) or quantitative mineral compositions (e.g., basalt vs. monomict breccia).

R A Zeigler↗

An in situ SEM experimental study of the thermal stability of a LAST thermoelectric material

Thermal stability is a key factor affecting the deployment of thermoelectric (TE) materials in the application of power generation. LAST (Lead-Antimony-Silver-Tellurium) is an emerging material with promising TE properties. The current study focused on the thermal stability of a LAST composition Ag0.86Pb19SbTe20 fabricated from a cast ingot. Using a customized heating stage, the morphology of LAST particles was studied via scanning electron microscopy (SEM) in situ, between room temperature and 575oC. The LAST material included in this study was stable below 550oC. The inclusion phase, which was antimony-rich, has a lower thermal stability than the PbTe-rich matrix. The SEM finding was also consistent with a thermogravimetrtic analysis.

36 MATERIALS SCIENCE↗

Processing of loose carbon nanotubes into isolated, high density submicron channels

Loose multiwall carbon nanotubes (MWNT) were processed into a bundle of 19,600 individual channels with an individual channel diameter of 0.4 micron using a fiber drawing process. First, a powder of sodium silicate solution containing purified MWNT was created. A glass capillary tube was filled with the powder and drawn into fiber. The fibers were cut into segments, bundled and redrawn multiple times to create fibers with multiple channels containing MWNT. This processing approach created thousands of uniformly ordered channels containing dispersed MWNT in a glass matrix while simultaneously aligning the MWNT. The bulk resistivity of the CNT-silicate channel has been improved by 38 percent after two consecutive draws as a result of increased CNT fraction.

36 MATERIALS SCIENCE↗

All-order perturbation calculation of energies, hyperfine constants, multipole polarizabilities, and blackbody radiation shift in {sup 87}Sr{sup +}

Excitation energies of the [Kr]ns{sub 1/2}, [Kr]np{sub j}, [Kr]nd{sub j}, and [Kr]nf{sub j} (n{<=}9 and [Kr]=(1s{sup 2}2s{sup 2}2p{sup 6}3s{sup 2}3p{sup 6}3d{sup 10}4s{sup 2}4p{sup 6}) in Sr ii are evaluated. First-order, second-order, third-order, and all-order Coulomb energies and first-order and second-order Coulomb-Breit energies are calculated. Reduced matrix elements, oscillator strengths, transition rates, and lifetimes are determined for the levels up to n=7. Electric-dipole (5s{sub 1/2}-np{sub j}, n=5-26), electric-quadrupole (5s{sub 1/2}-nd{sub j}, n=4-26), and electric-octupole (5s{sub 1/2}-nf{sub j}, n=4-26) matrix elements are calculated to obtain the ground-state E1, E2, and E3 static polarizabilities. Scalar and tensor polarizabilities for the 5p{sub j}-9p{sub j} and 4d{sub j}-8d{sub j} excited states in Sr ii are also calculated. All the above-mentioned matrix elements are determined using the all-order method. We also investigate the hyperfine structure in {sup 87}Sr{sup +}. The hyperfine A values and B values are determined for the first low-lying levels up to n=7. The quadratic Stark effect on hyperfine-structure levels of the {sup 87}Sr{sup +} ground state is investigated. The calculated shift for the (F=5,M=0){r_reversible}(F=4,M=0) transition is found to be 0.120(1) Hz/(kV/cm){sup 2}. These calculations provide a theoretical benchmark for comparison with the experiment and theory. A careful study of uncertainty of our calculations is carried out for the transition-matrix elements, line strengths, transition rates, lifetimes, polarizabilities, and the Stark shift coefficient.

74 ATOMIC AND MOLECULAR PHYSICS↗