Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Program characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

In-situ photo-reduction of silver particles and their SPR effect in enhancing the photocatalytic water splitting of Ag{sub 2}O/TiO{sub 2} photocatalysts under solar light irradiation: A case study

Highlights: • Visible light induced SPR bands confirmed the Plasmonic resonance behaviour of Ag. • Appreciable band gap reduction of TiO{sub 2} due to in-situ photoreduction of Ag{sub 2}O to Ag. • H{sub 2}-TPR emphasized the strong interaction between Ag and TiO{sub 2}. • Ag/TiO{sub 2} witnessed 76.6 folds improved H{sub 2} production rate than P25-TiO{sub 2}. - Abstract: Plasmonic Ag{sub 2}O/TiO{sub 2} photocatalysts were synthesized by impregnating silver oxide nano clusters over the surface of TiO{sub 2}. It is found that the in-situ photo reduced silver particles showed visible light absorption in a wide range of wavelength 400–800 nm due to localized surface plasmon resonance. The in-situ formed metallic silver transfer electrons to the TiO{sub 2} through SPR excitation and thus improving photocatalytic hydrogen production. The SPR behavior of silver particles on TiO{sub 2} was characterized by UV–vis diffuse reflectance spectroscopy and the X-ray photoelectron spectroscopy confirms the metallic silver. X-ray diffraction and transmission electron microscopy confirm the crystallinity of the prepared samples. H{sub 2}-temperature-programmed reduction, photoluminescence, electron paramagnetic resonance, infrared spectroscopy, BET-surface area and Raman spectra were used to understand the morphological and chemical nature of the catalysts. Among the samples, 1 wt% Ag/TiO{sub 2} showed the best activity ca. ∼23 mmol g{sup −1} in presence of glycerol scavenger.

36 MATERIALS SCIENCE↗

Impact of a Mixed Oxide’s Surface Composition and Structure on Its Adsorptive Properties: Case of the (Fe,Cr) 3 O 4 (111) Termination of the α-(Fe,Cr) 2 O 3 (0001) Surface

Characterization of an α-(Fe 0.75 ,Cr 0.25 ) 2 O 3 (0001) mixed oxide single crystal surface was conducted using x-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), low energy electron diffraction (LEED) and temperature programmed desorption (TPD). After sputter/anneal cleaning in ultra-high vacuum (UHV), the mixed oxide surface became terminated with a magnetite-(111) structure based on the presence of (2x2) spots in LEED and Fe 2+ in XPS. The composition of the surface was close to that of M 3 O 4 based on XPS, with the metal (M) content of Fe 2+/3+ and Cr 3+ being close to 1.4:1, despite the fact that the film’s bulk was 3:1 with respect to the metal cations. The enrichment of the surface with Cr was not altered by high temperature oxidation in UHV, but could be returned to that of the bulk film composition by exposure to the ambient. Adsorption of various probe molecules (NO, O 2 , CO 2 and H 2 O) was used to identify the active cation sites present in the (Fe,Cr) 3 O 4 (111) terminated surface. Although XPS and SIMS both indicated that the near-surface region was enriched in Cr 3+ , no adsorption states typically associated with Cr 3+ sites on α-Cr 2 O 3 single crystal surfaces were detected. Instead, the TPD behaviors of O 2 and CO 2 pointed toward the main active sites being Fe 2+ and Fe 3+ , with O 2 preferentially adsorbing at the former and CO 2 at the latter. NO was observed to bind at both Fe 2+ and Fe 3+ sites, and H 2 O TPD looked nearly identical to that for H 2 O on the Fe 3 O 4 (111) surface. Competition for adsorption sites between coadsorbed combinations of CO 2 , O 2 , H 2 O and NO corroborated these assignments. These results indicate that the surface composition of a mixed oxide can vary significantly from its bulk composition depending on the treatment conditions. Even then, the surface composition does not necessarily provide direct insight into the active adsorption sites. In the case of the (Fe,Cr) 3 O 4 (111) termination of the α-(Fe 0.75 ,Cr 0.25 ) 2 O 3 (0001) surface, Cr 3+ cations in the near-surface region appear to be fully coordinated and unavailable for adsorbing molecules. The authors thank Drs. Sara Chamberlin and Scott Chambers for supplying the film used in this work. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

adsorption↗

Improving the performance for direct electrolysis of CO 2 in solid oxide electrolysis cells with a Sr 1.9 Fe 1.5 Mo 0.5 O 6– δ electrode via infiltration of Pr 6 O 11 nanoparticles

Direct CO 2 electrolysis using solid oxide electrolysis cells (CO 2 -SOECs) holds promise to efficiently convert carbon dioxide to carbon monoxide and oxygen. Cathodes with desirable catalytic activity and chemical stability play a critical role in the development of direct CO 2 -SOECs. Although Sr 2 Fe 1.5 Mo 0.5 O 6–δ (SFM) has exhibited promise for direct CO 2 -SOECs due to its redox stability, it suffers from insufficient activity for the CO 2 reduction reaction (CO 2 RR). Here we report interface engineering of nanosized Pr 6 O 11 on the SFM cathode obtained through infiltration to promote the CO 2 RR performance for direct CO 2 -SOECs. The effect of Pr 6 O 11 loading on the performance of the CO 2 RR is systematically investigated. At 800 °C, the current density of the Pr 6 O 11 infiltrated SFM cathode with an optimum Pr 6 O 11 loading of 14.8 wt% reaches 1.61 A cm –2 at 1.5 V, more than double that of the SFM cathode (0.76 A cm –2 ) under the same operating conditions. X-ray photoelectron spectroscopy (XPS) characterization and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis indicate that the adsorption ability of CO 2 on the SFM cathode has been significantly improved by the formation of Pr 6 O 11 . Temperature-programmed desorption (TPD) of CO 2 measurements further manifest that a 14.8 wt% Pr 6 O 11 -SFM cathode has better CO desorption capacity. In addition, polarization resistance of the SFM cathode has significantly decreased with the addition of Pr 6 O 11 . Three-electrode measurement was used to analyze the improved electrode kinetics. Finally, these results demonstrate that the formation of Pr 6 O 11 in the SFM cathode through infiltration is a promising approach for increasing CO 2 RR activity for CO 2 -SOECs.

03 NATURAL GAS↗

TOWARD CHARACTERIZATION OF THE TYPE IIP SUPERNOVA PROGENITOR POPULATION: A STATISTICAL SAMPLE OF LIGHT CURVES FROM Pan-STARRS1

In recent years, wide-field sky surveys providing deep multiband imaging have presented a new path for indirectly characterizing the progenitor populations of core-collapse supernovae (SNe): systematic light-curve studies. We assemble a set of 76 grizy-band Type IIP SN light curves from Pan-STARRS1, obtained over a constant survey program of 4 yr and classified using both spectroscopy and machine-learning-based photometric techniques. We develop and apply a new Bayesian model for the full multiband evolution of each light curve in the sample. We find no evidence of a subpopulation of fast-declining explosions (historically referred to as ''Type IIL'' SNe). However, we identify a highly significant relation between the plateau phase decay rate and peak luminosity among our SNe IIP. These results argue in favor of a single parameter, likely determined by initial stellar mass, predominantly controlling the explosions of red supergiants. This relation could also be applied for SN cosmology, offering a standardizable candle good to an intrinsic scatter of ≲ 0.2 mag. We compare each light curve to physical models from hydrodynamic simulations to estimate progenitor initial masses and other properties of the Pan-STARRS1 Type IIP SN sample. We show that correction of systematic discrepancies between modeled and observed SN IIP light-curve properties and an expanded grid of progenitor properties are needed to enable robust progenitor inferences from multiband light-curve samples of this kind. This work will serve as a pathfinder for photometric studies of core-collapse SNe to be conducted through future wide-field transient searches.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterizing structural features of two-dimensional particle systems through Voronoi topology

This paper introduces a new approach toward characterizing local structural features of two-dimensional particle systems. The approach can accurately identify and characterize defects in high-temperature crystals, distinguish a wide range of nominally disordered systems, and robustly describe complex structures such as grain boundaries. This paper also introduces two-dimensional functionality into the open-source software program VoroTop which automates this analysis. This software package is built on a recently-introduced multithreaded version of V ORO ++, enabling the analysis of systems with billions of particles on high-performance computer architectures.

36 MATERIALS SCIENCE↗

Asymmetric ferroelectricity by design in atomic-layer superlattices with broken inversion symmetry

In atomic-layer superlattices constructed using three constituent phases, CaTiO 3 , SrTiO 3 , and BaTiO 3 , the stacking sequence of the atomic layers is found to control the symmetry of the high-temperature dielectric response. In such a superlattice when a nanostructured asymmetric strain is programmed into the lattice via the stacking order, the natural symmetry at high temperatures is removed and a polarized sample is obtained in which the polarization increases as the temperature is lowered. Here, in contrast to a ferroelectric characterized by a bistable ground state with two equal and opposite electronic polarizations, our experiments show evidence of asymmetric ferroelectric correlations that set in when such a sample becomes hysteretic below a temperature T x , with two unequal polarization states. We further show that both the magnitude and direction of this ferroelectric asymmetry can be controlled by the engineered atomic-layer stacking order and periodicity of the superlattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Applications of the Landau bootstrap

We advocate a strategy of bootstrapping Feynman integrals from just knowledge of their singular behavior. This approach is complementary to other bootstrap programs, which exploit nonperturbative constraints such as unitarity, or amplitude-level constraints such as gauge invariance. We begin by studying where a Feynman integral can become singular, and the behavior it exhibits near these singularities. We then characterize the space of functions that we expect the integral to evaluate to, in order to formulate an appropriate ansatz. Finally, we derive constraints on where each singularity can appear in this ansatz, and use information about the expansion of the integral around singular points in order to determine the value of all remaining free coefficients. Throughout, we highlight how constraints that have previously only been derived for integrals with generic masses can be extended to integrals involving particles of equal or vanishing mass. We illustrate the effectiveness of this approach by bootstrapping a number of examples, including the four-point double box with a massive internal loop. Published by the American Physical Society 2025

Hannesdottir, Holmfridur S. (ORCID:000000025440208↗

Idaho National Laboratory Site Environmental Monitoring Plan

This plan provides a high-level summary of environmental monitoring performed by various organizations within and around the Idaho National Laboratory (INL) Site as required by U.S. Department of Energy (DOE) Order 435.1, Radioactive Waste Management, and DOE Order 458.1, Radiation Protection of the Public and the Environment, Guide DOE/EH-0173T, Environmental Regulatory Guide for Radiological Effluent Monitoring and Environmental Surveillance, and in accordance with 40 Code of Federal Regulations (CFR) 61, National Emission Standards for Hazardous Air Pollutants. The purpose of these orders is to 1) implement sound stewardship practices that protect the air, water, land, and other natural and cultural resources that may be impacted by DOE operations, and 2) to establish standards and requirements for the operations of DOE and DOE contractors with respect to protection of the environment and members of the public against undue risk from radiation. This plan describes the organizations responsible for conducting environmental monitoring across the INL Site, the rationale for monitoring, the types of media being monitored, where the monitoring is conducted, and where monitoring results can be obtained. Detailed monitoring procedures, program plans, or other governing documents used by contractors or agencies to implement requirements are referenced in this plan. This plan covers all planned monitoring and environmental surveillance. Non-routine activities such as special research studies and characterization of individual sites for environmental restoration are outside the scope of this plan.

54 ENVIRONMENTAL SCIENCES↗

Thermal Properties Capability Development Workshop Summary to Support the Implementation Plan for PIE Thermal Conductivity Measurements

The Department of Energy (DOE)-Office of Nuclear Energy (NE), Idaho National Laboratory (INL), and associated nuclear fuels programs have invested heavily over the years in infrastructure and capability development. With the current domestic and international need to develop Accident Tolerant Fuels (ATF), increasing importance is being placed on understanding fuel performance in irradiated conditions and on the need to model and validate that performance to reduce uncertainty and licensing timeframes. INL’s Thermal Properties Capability Development Workshop was organized to identify the capability needed by the various nuclear programs and list the opportunities to meet those needs. In addition, by the end of fiscal year 2015, the decision will be made on the initial thermal properties instruments to populate the shielded cell in the Irradiated Materials Characterization Laboratory (IMCL).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TEAM Project Review, Year 2

This report summarizes our research activities within the TEAM project between December 2020 and December 2021, funded by the ASCR Advanced Research in Quantum Computing program. During the reporting period the LLNL-MSU team has made progress on several fronts. An overarching goal of the team is to provide a comprehensive suite of software tools that can be used for the Characterize-Optimize-Compute loop needed to implement and execute algorithms on quantum devices. We are concurrently developing lightweight solvers that can be used on desktop computers to find optimal control pulses and to characterize small quantum systems (consisting of a few transmons and cavities). However, desktop computers are insufficient for simulating and characterizing larger quantum systems. We have therefore also developed parallel, distributed memory, simulators and optimization solvers, both for open and closed quantum systems. These parallel solvers have, for example, been used to study quantum optimal control for pure-state preparation, utilizing 1000’s of cores on a modern high-performance computing (HPC) platform.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

INL Environmental Monitoring Plan (DOE/ID-11088 Rev. 5)

This plan provides a high-level summary of environmental monitoring performed by various organizations within and around the Idaho National Laboratory (INL) Site as required by U.S. Department of Energy (DOE) Order 435.1, Radioactive Waste Management, and DOE Order 458.1, Radiation Protection of the Public and the Environment, Guide DOE/EH-0173T, Environmental Regulatory Guide for Radiological Effluent Monitoring and Environmental Surveillance, and in accordance with 40 Code of Federal Regulations (CFR) 61, National Emission Standards for Hazardous Air Pollutants. The purpose of these orders is to 1) implement sound stewardship practices that protect the air, water, land, and other natural and cultural resources that may be impacted by DOE operations, and 2) to establish standards and requirements for the operations of DOE and DOE contractors with respect to protection of the environment and members of the public against undue risk from radiation. This plan describes the organizations responsible for conducting environmental monitoring across the INL Site, the rationale for monitoring, the types of media being monitored, where the monitoring is conducted, and where monitoring results can be obtained. Detailed monitoring procedures, program plans, or other governing documents used by contractors or agencies to implement requirements are referenced in this plan. This plan covers all planned monitoring and environmental surveillance. Non-routine activities such as special research studies and characterization of individual sites for environmental restoration are outside the scope of this plan.

54 ENVIRONMENTAL SCIENCES↗

A Sustainability-Based Expert System for Additive Manufacturing and CNC Machining

The objective of this research study is to develop a set of expert systems that can aid metal manufacturing facilities in selecting binder jetting, direct metal laser sintering, or CNC machining based on viable products, processes, system parameters, and inherent sustainability aspects. For the purposes of this study, cost-effectiveness, energy, and auxiliary material usage efficiency were considered the key indicators of manufacturing process sustainability. The expert systems were developed using the knowledge automation software Exsys Corvid ® V6.1.3. The programs were verified by analyzing and comparing the sustainability impacts of binder jetting and CNC machining during the fabrication of a stainless steel 316L component. According to the results of this study, binder jetting is deemed to be characterized by more favorable indicators of sustainability in comparison to CNC machining, considering the fabrication of components feasible for each technology.

36 MATERIALS SCIENCE↗

Efficiently Computable Limits on EPR Pair Generation in Quantum Broadcast Channels

We investigate the generation of EPR pairs between three observers in a general causally structured setting, where communication occurs via a noisy quantum broadcast channel. The most general quantum codes for this setup take the form of tripartite quantum channels. Since the receivers are constrained by causal ordering, additional temporal relationships naturally emerge between the parties. These causal constraints enforce intrinsic no-signalling conditions on any tripartite operation, ensuring that it constitutes a physically realizable quantum code for a quantum broadcast channel. We analyze these constraints and, more broadly, characterize the most general quantum codes for communication over such channels. We examine the capabilities of codes that are fully no-signalling among the three parties, positive partial transpose (PPT)-preserving, or both, and derive simple semidefinite programs to compute the achievable entanglement fidelity. We then establish a hierarchy of semidefinite programming converse bounds -- both weak and strong -- for the capacity of quantum broadcast channels for EPR pair generation, in both one-shot and asymptotic regimes. Notably, in the special case of a point-to-point channel, our strong converse bound recovers and strengthens existing results. Finally, we demonstrate how the PPT-preserving codes we develop can be leveraged to construct PPT-preserving entanglement combing schemes, and vice versa.

FOS: Physical sciences↗

Dealing with Historical Discrepancies: The Recovery of National Research Experiment (NRX) Reactor Fuel Rods at Chalk River Laboratories (CRL) - 13324

Following the 1952 National Research Experiment (NRX) Reactor accident, fuel rods which had short irradiation histories were 'temporarily' buried in wooden boxes at the 'disposal grounds' during the cleanup effort. The Nuclear Legacy Liabilities Program (NLLP), funded by Natural Resources Canada (NRCan), strategically retrieves legacy waste and restores lands affected by Atomic Energy of Canada Limited (AECL) early operations. Thus under this program the recovery of still buried NRX reactor fuel rods and their relocation to modern fuel storage was identified as a priority. A suspect inventory of NRX fuels was compiled from historical records and various research activities. Site characterization in 2005 verified the physical location of the fuel rods and determined the wooden boxes they were buried in had degraded such that the fuel rods were in direct contact with the soil. The fuel rods were recovered and transferred to a modern fuel storage facility in 2007. Recovered identification tags and measured radiation fields were used to identify the inventory of these fuels. During the retrieval activity, a discrepancy was discovered between the anticipated number of fuel rods and the number found during the retrieval. A total of 32 fuel rods and cans of cut end pieces were recovered from the specified site, which was greater than the anticipated 19 fuel rods and cans. This discovery delayed the completion of the project, increased the associated costs, and required more than anticipated storage space in the modern fuel storage facility. A number of lessons learned were identified following completion of this project, the most significant of which was the potential for discrepancies within the historical records. Historical discrepancies are more likely to be resolved by comprehensive historical record searches and site characterizations. It was also recommended that a complete review of the wastes generated, and the total affected lands as a result of this historic 1952 NRX accident be undertaken. These lessons and recommendations have lead to changes in how the NLLP is executed in the CRL waste management areas. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Interactive statistical decision tools (GiSdT): An open source software integration of decision analysis and stakeholder judgment for sustainable waste management, disposal and remediation - 15650

The vast majority of remediation and waste management decisions are made without quantitative consideration of economic and socio-political factors. They are made instead based on quantitative metrics of human health risk. Sustainable decisions need to be made based on all three 'pillars of sustainability' (economics, environment and social), and require understanding and characterization of the costs and values associated with each pillar. In addition, such decisions need to conform to regulatory or other legal requirements, which often constrains the decision space of interest. Although efforts are often made to include factors across all three pillars (for example, for decisions made under CERCLA), these efforts are usually qualitative, and hence difficult to defend. They lack technical defensibility, transparency and traceability. The purpose of GiSdT (Guided Interactive Statistical Decision Tools) is to provide a quantitative framework whereby all aspects of a decision problem, such as remediation and waste management decisions, can be addressed quantitatively, and hence, defensibly, transparently and traceably. Most decision-makers do not currently have access to useful or usable methods and approaches when are presented with choices that have significant impacts across all three pillars of sustainability. The goal of GiSdT is to provide that access by identifying or developing effective and user-friendly decision methods and approaches that empower decision-makers to explicitly and routinely incorporate all aspects of sustainability into their decision-making. To identify and develop these methods and approaches, GiSdT provides the tools needed for decision-makers and stakeholders to understand and characterize their knowledge of their current decision-making processes, and what methods and approaches they need to pro-actively and quantitatively address all aspects of sustainability in their decisions. GiSdT is an open source interactive framework program that provides the tools needed to address the relevant components of a sustainability-based decision problem, including describing the decision landscape, translating that landscape into goals and objectives, valuing the measurable attributes that describe each objective, identifying decision options and addressing the uncertainty in the attributes (e.g., human health risk, institutional controls) through appropriate probabilistic models. In addition to addressing these quantitative technical components, the GiSdT program is aimed at facilitating stakeholder involvement so that the perspectives, values and objectives are all relevant stakeholders are addressed explicitly in the decision making process. The technical underpinnings of our software program, called Guided Interactive Statistical Decision Tools (GiSdT), are described. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Supplying materials needed for grain growth characterizations of nano-grained UO 2

This activity is supported by the US Nuclear Energy Advanced Modeling and Simulation (NEAMS) Fuels Product Line (FPL) and aims at providing experimental data for the validation of the mesoscale simulation code MARMOT. MARMOT is a mesoscale multiphysics code that predicts the coevolution of microstructure and properties within reactor fuel during its lifetime in the reactor. It is an important component of the Moose-Bison-Marmot (MBM) code suite that has been developed by Idaho National Laboratory (INL) to enable next generation fuel performance modeling capability as part of the NEAMS Program FPL. In order to ensure the accuracy of the microstructure based materials models being developed within the MARMOT code, extensive validation efforts must be carried out. In this report, we summarize our preliminary synchrotron radiation experiments at APS to determine the grain size of nanograin UO 2 . The methodology and experimental setup developed in this experiment can directly apply to the proposed in-situ grain growth measurements. The investigation of the grain growth kinetics was conducted based on isothermal annealing and grain growth characterization as functions of duration and temperature. The kinetic parameters such as activation energy for grain growth for UO 2 with different stoichiometry are obtained and compared with molecular dynamics (MD) simulations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Synchrotron characterization of nanograined UO 2 grain growth

This activity is supported by the US Nuclear Energy Advanced Modeling and Simulation (NEAMS) Fuels Product Line (FPL) and aims at providing experimental data for the validation of the mesoscale simulation code MARMOT. MARMOT is a mesoscale multiphysics code that predicts the coevolution of microstructure and properties within reactor fuel during its lifetime in the reactor. It is an important component of the Moose-Bison-Marmot (MBM) code suite that has been developed by Idaho National Laboratory (INL) to enable next generation fuel performance modeling capability as part of the NEAMS Program FPL. In order to ensure the accuracy of the microstructure based materials models being developed within the MARMOT code, extensive validation efforts must be carried out. In this report, we summarize our preliminary synchrotron radiation experiments at APS to determine the grain size of nanograin UO 2 . The methodology and experimental setup developed in this experiment can directly apply to the proposed in-situ grain growth measurements. The investigation of the grain growth kinetics was conducted based on isothermal annealing and grain growth characterization as functions of duration and temperature. The kinetic parameters such as activation energy for grain growth for UO 2 with different stoichiometry are obtained and compared with molecular dynamics (MD) simulations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Applying Best Practices to Florida Local Government Retrofit Programs, Central Florida (Fact Sheet)

In some communities, local government and non-profit entities have funds to purchase and renovate distressed, foreclosed homes for resale in the affordable housing market. Numerous opportunities to improve whole house energy efficiency are inherent in these comprehensive renovations. BA-PIRC worked together in a multi-year field study making recommendations in individual homes, meanwhile compiling improvement costs, projected energy savings, practical challenges, and labor force factors surrounding common energy-related renovation measures. The field study, Phase 1 of this research, resulted in a set of best practices appropriate to the current labor pool and market conditions in central Florida to achieve projected annual energy savings of 15-30% and higher. This report describes Phase 2 of the work where researchers worked with a local government partner to implement and refine the "current best practices". A simulation study was conducted to characterize savings potential under three sets of conditions representing varying replacement needs for energy-related equipment and envelope components. The three scenarios apply readily to the general remodeling industry as for renovation of foreclosed homes for the affordable housing market. Our new local government partner, the City of Melbourne, implemented the best practices in a community-scale renovation program that included ten homes in 2012.

30% SAVINGS↗