SEARCH · Engineering Papers

Results for “Product”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Ada software productivity prototypes: A case study

A case study of the impact of Ada on a Command and Control project completed at the Jet Propulsion Laboratory (JPL) is given. The data for this study was collected as part of a general survey of software costs and productivity at JPL and other NASA sites. The task analyzed is a successful example of the use of rapid prototyping as applied to command and control for the U.S. Air Force and provides the U.S. Air Force Military Airlift Command with the ability to track aircraft, air crews and payloads worldwide. The task consists of a replicated database at several globally distributed sites. The local databases at each site can be updated within seconds after changes are entered at any one site. The system must be able to handle up to 400,000 activities per day. There are currently seven sites, each with a local area network of computers and a variety of user displays; the local area networks are tied together into a single wide area network. Using data obtained for eight modules, totaling approximately 500,000 source lines of code, researchers analyze the differences in productivities between subtasks. Factors considered are percentage of Ada used in coding, years of programmer experience, and the use of Ada tools and modern programming practices. The principle findings are the following. Productivity is very sensitive to programmer experience. The use of Ada software tools and the use of modern programming practices are important; without such use Ada is just a large complex language which can cause productivity to decrease. The impact of Ada on development effort phases is consistent with earlier reports at the project level but not at the module level.

Hihn, Jairus M.↗

NASA NTRS1990

Autonomous production of propellants

The autonomous production of propellants is addressed. Since 80 to 90 percent of a spacecraft's mass is typically propellants, it is advantageous to produce propellants in strategic locations en route to, and at, the desired mission destination. This reduces the weight of the spacecraft and the cost of each mission. Since one of the primary goals of the space program is safety, a totally automated propellant production system is desirable. This system would remove, from hostile, high-risk extraterrestrial environments, the constant human intervention currently required in the production of many propellants. This enables the exploration of space to be more than the search for and production of fuel. As a proof-of-concept demonstration, one specific case was chosen for this study. That case was a composite propellant processor (the principle is more important than the application), and the specific processor used saved SERC the considerable cost of acquiring a new liquid propellant processor that would also have required similar automation.

Ramohalli, Kumar↗

NASA NTRS1990

Design of a lunar oxygen production plant

To achieve permanent human presence and activity on the moon, oxygen is required for both life support and propulsion. Lunar oxygen production using resources existing on the moon will reduce or eliminate the need to transport liquid oxygen from earth. In addition, the co-products of oxygen production will provide metals, structural ceramics, and other volatile compounds. This will enable development of even greater self-sufficiency as the lunar outpost evolves. Ilmenite is the most abundant metal-oxide mineral in the lunar regolith. A process involving the reaction of ilmenite with hydrogen at 1000 C to produce water, followed by the electrolysis of this water to provide oxygen and recycle the hydrogen has been explored. The objective of this 1990 Summer Faculty Project was to design a lunar oxygen-production plant to provide 5 metric tons of liquid oxygen per year from lunar soil. The results of this study describe the size and mass of the equipment, the power needs, feedstock quantity and the engineering details of the plant.

Radhakrishnan, Ramalingam↗

NASA NTRS1991

Production and use of metals and oxygen for lunar propulsion

Production, power, and propulsion technologies for using oxygen and metals derived from lunar resources are discussed. The production process is described, and several of the more developed processes are discussed. Power requirements for chemical, thermal, and electrical production methods are compared. The discussion includes potential impact of ongoing power technology programs on lunar production requirements. The performance potential of several possible metal fuels including aluminum, silicon, iron, and titanium are compared. Space propulsion technology in the area of metal/oxygen rocket engines is discussed.

Hepp, Aloysius F.↗

NASA NTRS1991

Deriving Earth science products from SSM/I

There are 3 components to this project. The first is the production of a quality controlled Level-1 data product for the Special Sensor Microwave Imager (SSM/I). Second is the generation of research quality ocean products. The 3rd component is studying the feasibility of obtaining both wind speed and wind direction from satellite microwave radiometers. The status of the three studies are discussed briefly. Time series of the SSM/I physical temperatures, receiver gains, and noise figures were studied in order to access the stability and integrity of the sensor data. A physically based retrieval algorithm was used to compute ocean products from the SSM/I Level-1 data. It simultaneously finds the near surface wind speed, the columnar water vapor, and the columnar liquid water. A wind direction signal was found in the SSM/I brightness temperature.

Wentz, Frank J.↗

NASA NTRS1991

Production and use of metals and oxygen for lunar propulsion

Hepp, Aloysius F.↗

NASA NTRS1991

Information logistics: A production-line approach to information services

Logistics can be defined as the process of strategically managing the acquisition, movement, and storage of materials, parts, and finished inventory (and the related information flow) through the organization and its marketing channels in a cost effective manner. It is concerned with delivering the right product to the right customer in the right place at the right time. The logistics function is composed of inventory management, facilities management, communications unitization, transportation, materials management, and production scheduling. The relationship between logistics and information systems is clear. Systems such as Electronic Data Interchange (EDI), Point of Sale (POS) systems, and Just in Time (JIT) inventory management systems are important elements in the management of product development and delivery. With improved access to market demand figures, logisticians can decrease inventory sizes and better service customer demand. However, without accurate, timely information, little, if any, of this would be feasible in today's global markets. Information systems specialists can learn from logisticians. In a manner similar to logistics management, information logistics is concerned with the delivery of the right data, to the ring customer, at the right time. As such, information systems are integral components of the information logistics system charged with providing customers with accurate, timely, cost-effective, and useful information. Information logistics is a management style and is composed of elements similar to those associated with the traditional logistics activity: inventory management (data resource management), facilities management (distributed, centralized and decentralized information systems), communications (participative design and joint application development methodologies), unitization (input/output system design, i.e., packaging or formatting of the information), transportations (voice, data, image, and video communication systems), materials management (data acquisition, e.g., EDI, POS, external data bases, data entry) and production scheduling (job, staff, and project scheduling).

Adams, Dennis↗

NASA NTRS1991

An upper limit for the rate coefficient of the reaction of NH2 radicals with O2 using FTIR product analysis

Fourier transform infrared spectrometry has been used to study the products of the photooxidation of ammonia in the presence of oxygen at 296 K. The data have been used to derive an upper limit of 6 x 10 exp -21/cu cm molecule s for the reaction of NH2 radicals with O2 to produce NO(x) at 296 K. This upper limit, which is three orders of magnitude lower than previous estimates based on the kinetics of NH2 loss, rules out the importance of this reaction in the atmosphere and suggests that NH2 will be oxidized by O3 or NO2. The effect on the NO(x) and N2O budgets depends critically on the products of the NH2 + O3 reaction. Simulations of the experimental product yields also allow an evaluation of possible product channels for the reaction of NH2 with HO2.

Tyndall, G. S.↗

NASA NTRS1992

Photosynthetic characteristics and estimated growth rates indicate grazing is the proximate control of primary production in the equatorial Pacific

Macronutrients persist in the surface layer of the equatorial Pacific because the production of phytoplankton is limited; the nature of this limitation has yet to be resolved. Measurements of photosynthesis as a function of irradiance (P-I) provide information on the control of primary productivity, a question of great biogeochemical importance. Accordingly, P-I was measured in the equatorial Pacific along 150 deg W, during February-March 1988. Diel variability of P-I showed a pattern consistent with nocturnal vertical mixing in the upper 20 m followed by diurnal stratification, causing photoinhibition near the surface at midday. Otherwise, the distribution of photosynthetic parameters with depth and the stability of P-I during simulated in situ incubations over 2 days demonstrated that photoadaptation was nearly complete at the time of sampling: photoadaptation had not been effectively countered by upwelling or vertical mixing. Measurements of P-I and chlorophyll during manipulations of trace elements showed that simple precautions to minimize contamination were sufficient to obtain valid rate measurements and that the specific growth rates of phytoplankton were fairly high in situ, a minimum of 0.6/d. Diel variability of beam attenuation also indicated high specific growth rates of phytoplankton and a strong coupling of production with grazing. It appears that grazing is the proximate control on the standing crop of phytoplankton. Nonetheless, the supply of a trace nutrient such as iron might ultimately regulate productivity by influencing species composition and food-web structure.

Cullen, John J.↗

NASA NTRS1992

Estimating new production in the equatorial Pacific Ocean at 150 deg W

A major goal of the WEC88 cruise of the R/V Wecoma to the equatorial Pacific (made in February-March 1988) was to establish rates of new production along a meridional section at 150 deg W and to compare these measured rates with the relatively high values for the equatorial Pacific that had been reported previously using indirect methods and models. Production values were obtained from the traditional approach using N-15 labeled nitrate uptake, and by using C-14 fixation values multiplied by f (proportion of new production) from various sources: from N-15 data, from a C-14 fixation-versus-f relationship, or from a nitrate-versus-f relationship. The ratios of directly measured nitrate and carbon uptake and the ratios of nitrate to nitrate plus ammonium uptake, i.e., values of f, agree well; values of f calculated from carbon uptake or from nitrate concentration are overestimates for the equatorial upwelling region. Carbon-to-nitrogen uptake ratios measured with C-14 and N-15, respectively, approximate the Redfield molar ratio, 6.6 C:N. The overall mean value of f (0.17) helps confirm the view that the low primary production in the enriched eastern equatorial Pacific is due to failure of the nitrate-uptake system.

Dugdale, Richard C.↗

NASA NTRS1991

Pilot production of 4 sq cm ITO/InP photovoltaic solar cells

Experimental results of a pilot production of 32 4-sq cm indium tin oxide (ITO)InP space solar cells are presented. The discussion includes analysis of the device performance of the best cells produced as well as the performance range of all production cells. The experience gained from the production is discussed, indicating other issues that may be encountered when large-scale productions are initiated. Available data on a 4-sq cm ITO/InP cell that was flown on the UoSAT-5 satellite is reported.

Gessert, T. A.↗

NASA NTRS1992

Propellant production and useful materials: Hardware data from components and the systems

During the past year significant progress included: a major breakthrough in oxygen production through discs (instead of tubes) that resulted in two orders-of-magnitude increase in the yield rates, proving that oxygen production from any iron-bearing silicate (avoiding costly beneficiation) in lunar in-situ resource utilization (ISRU); construction of a half-scale robotic soil processor; production of melt-spun fibers in a solar furnace; and the culmination of first-stage research in the construction (and delivery to NASA LaRC) of a self-contained portable oxygen plant that incorporates the first generation ISRU technologies developed at UA SERC. In addition, further reductions in mass and power needs were achieved in two smaller oxygen plants, which, however, have far greater production rates. SERC continued to attract bright students both at the undergraduate and graduate levels, and several area high school students through the Professional Internship Program (PIP) administered by the local school district. Invited lectures at elementary schools continue to draw enthusiastic response. Another important first was the creation of the Freshman Colloquium, 'Space in Our Future, and Our Future in Space,' geared toward women and minority students. This course proved to be a success, with more than one-half of the enrollment composed of women. In recognition of these important contributions, the author was appointed to the NRC Committee on Space Science Technologies.

Ramohalli, Kumar↗

NASA NTRS1992

Oxygen and iron production by electrolytic smelting of lunar soil

Work during the past year involved two aspects: (1) electrolysis experiments on a larger scale than done before, and (2) collaboration with Carbotek Inc. on design for a lunar magma electrolysis cell. It was demonstrated previously that oxygen can be produced by direct electrolysis of silicate melts. Previous experiments using 50-100 mg of melt have succeeded in measuring melt resistivities, oxygen production efficiencies, and have identified the character of metal products. A series of experiments using 1-8 grams of silicate melt, done in alumina and spinel containers sufficiently large that surface tension effects between the melt and the wall are expected to have minor effect on the behavior of the melt in the region of the electrodes were completed. The purpose of these experiments was to demonstrate the durability of the electrode and container materials, demonstrate the energy efficiency of the electrolysis process, further characterize the nature of the expected metal and spinel products, measure the efficiency of oxygen production and compare to that predicted on the basis of the smaller-scale experiments, and identify any unexpected benefits or problems of the process. Four experimental designs were employed. Detailed results of these experiments are given in the appendix ('Summary of scaling-up experiments'); a general report of the results is given in terms of implications of the experiments on container materials, cathode materials, anode materials, bubble formation and frothing of the melt, cell potential, anode-cathode distance, oxygen efficiency, and energy efficiency.

Colson, R. O.↗

NASA NTRS1991

NASA SBIR product catalog, 1991

This catalog is a partial list of products of NASA SBIR (Small Business Innovation Research) projects that have advanced to some degree into Phase 3. While most of the products evolved from work conducted during SBIR Phase 1 and 2, a few advanced to commercial status solely from Phase 1 activities. The catalog presents information provided to NASA by SBIR contractors who wished to have their products exhibited at Technology 2001, a NASA-sponsored technology transfer conference held in San Jose, California, on December 4, 5, and 6, 1991. The catalog presents the product information in the following technology areas: computer and communication systems; information processing and AI; robotics and automation; signal and image processing; microelectronics; electronic devices and equipment; microwave electronic devices; optical devices and lasers; advanced materials; materials processing; materials testing and NDE; materials instrumentation; aerodynamics and aircraft; fluid mechanics and measurement; heat transfer devices; refrigeration and cryogenics; energy conversion devices; oceanographic instruments; atmosphere monitoring devices; water management; life science instruments; and spacecraft electromechanical systems.

Source record↗

NASA NTRS1992

Free tropospheric ozone production following entrainment of urban plumes into deep convection

It is shown that rapid vertical transport of air from urban plumes through deep convective clouds can cause substantial enhancement of the rate of O3 production in the free troposphere. Simulation of convective redistribution and subsequent photochemistry of an urban plume from Oklahoma City during the 1985 PRESTORM campaign shows enhancement of O3 production in the free tropospheric cloud outflow layer by a factor of almost 4. In contrast, simulation of convective transport of an urban plume from Manaus, Brazil, into a prestine free troposphere during GTE/ABLE 2B (1987), followed by a photochemical simulation, showed enhancement of O3 production by a factor of 35. The reasons for the different enhancements are (1) intensity of cloud vertical motion; (2) initial boundary layer O3 precursor concentrations; and (3) initial amount of background free tropospheric NO(x). Convective transport of ozone precursors to the middle and upper troposphere allows the resulting O3 to spread over large geographic regions, rather than being confined to the lower troposphere where loss processes are much more rapid. Conversely, as air with lower NO descends and replaces more polluted air, there is greater O3 production efficiency per molecule of NO in the boundary layer following convective transport. As a result, over 30 percent more ozone could be produced in the entire tropospheric column in the first 24 hours following convective transport of urban plumes.

Pickering, Kenneth E.↗

NASA NTRS1992

Direct detection of C4H2 photochemical products - Possible routes to complex hydrocarbons in planetary atmospheres

The photochemistry of diacetylene (C4H2), the largest hydrocarbon to be unambiguously identified in planetary atmospheres, is of considerable importance to understanding the mechanisms by which complex molecules are formed in the solar system. In this work, the primary products of C4H2's ultraviolet photochemistry were determined in a two-laser pump-probe scheme in which the products of C4H2 photoexcitation are detected by vacuum ultraviolet photoionization in a time-of-flight mass spectrometer. Three larger hydrocarbon primary products were observed with good yield in the C4H2 + C4H2 reaction: C6H2, C8H2, and C8H3. Neither C6H2 or C8H3 is anticipated by current photochemical models of the atmospheres of Titan, Uranus, Neptune, Pluto, and Triton. The free hydrogen atoms that are released during the formation of the C8H3 and C8H2 products also may partially offset the role of C4H2 in catalyzing the recombination of free hydrogen atoms in the planetary atmospheres.

Bandy, Ralph E.↗

NASA NTRS1993

Estimators of primary production for interpretation of remotely sensed data on ocean color

The theoretical basis is explained for some commonly used estimators of daily primary production in a vertically uniform water column. These models are recast into a canonical form, with dimensionless arguments, to facilitate comparison with each other and with an analytic solution. The limitations of each model are examined. The values of the photoadaptation parameter I(k) observed in the ocean are analyzed, and I(k) is used as a scale to normalize the surface irradiance. The range of this scaled irradiance is presented. An equation is given for estimation of I(k) from recent light history. It is shown how the models for water column production can be adapted for estimation of the production in finite layers. The distinctions between model formulation, model implementation and model evaluation are discussed. Recommendations are given on the choice of algorithm for computation of daily production according to the degree of approximation acceptable in the result.

Platt, Trevor↗

NASA NTRS1993

Primary production control of methane emission from wetlands

Based on simultaneous measurements of CO2 and CH4 exchange in wetlands extending from subarctic peatlands to subtropical marshes, a positive correlation between CH4 emission and net ecosystem production is reported. It is suggested that net ecosystem production is a master variable integrating many factors which control CH4 emission in vegetated wetlands. It is found that about 3 percent of the daily net ecosystem production is emitted back to the atmosphere as CH4. With projected stimulation of primary production and soil microbial activity in wetlands associated with elevated atmospheric CO2 concentration, the potential for increasing CH4 emission from inundated wetlands, further enhancing the greenhouse effect, is examined.

Whiting, G. J.↗