Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Probability Distribution Function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,747 records · Page 97

Experimental and theoretical study of rotationally inelastic diffraction of H{sub 2}(D{sub 2}) from methyl-terminated Si(111)

Fundamental details concerning the interaction between H{sub 2} and CH{sub 3}–Si(111) have been elucidated by the combination of diffractive scattering experiments and electronic structure and scattering calculations. Rotationally inelastic diffraction (RID) of H{sub 2} and D{sub 2} from this model hydrocarbon-decorated semiconductor interface has been confirmed for the first time via both time-of-flight and diffraction measurements, with modest j = 0 → 2 RID intensities for H{sub 2} compared to the strong RID features observed for D{sub 2} over a large range of kinematic scattering conditions along two high-symmetry azimuthal directions. The Debye-Waller model was applied to the thermal attenuation of diffraction peaks, allowing for precise determination of the RID probabilities by accounting for incoherent motion of the CH{sub 3}–Si(111) surface atoms. The probabilities of rotationally inelastic diffraction of H{sub 2} and D{sub 2} have been quantitatively evaluated as a function of beam energy and scattering angle, and have been compared with complementary electronic structure and scattering calculations to provide insight into the interaction potential between H{sub 2} (D{sub 2}) and hence the surface charge density distribution. Specifically, a six-dimensional potential energy surface (PES), describing the electronic structure of the H{sub 2}(D{sub 2})/CH{sub 3}−Si(111) system, has been computed based on interpolation of density functional theory energies. Quantum and classical dynamics simulations have allowed for an assessment of the accuracy of the PES, and subsequently for identification of the features of the PES that serve as classical turning points. A close scrutiny of the PES reveals the highly anisotropic character of the interaction potential at these turning points. This combination of experiment and theory provides new and important details about the interaction of H{sub 2} with a hybrid organic-semiconductor interface, which can be used to further investigate energy flow in technologically relevant systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

GEOMETRIC AND DYNAMICAL MODELS OF REVERBERATION MAPPING DATA

We present a general method to analyze reverberation (or echo) mapping data that simultaneously provides estimates for the black hole mass and for the geometry and dynamics of the broad-line region (BLR) in active galactic nuclei (AGNs). While previous methods yield a typical scale size of the BLR or a reconstruction of the transfer function, our method directly infers the spatial and velocity distribution of the BLR from the data, from which a transfer function can be easily derived. Previous echo mapping analysis requires an independent estimate of a scaling factor known as the virial coefficient to infer the mass of the black hole, but this is not needed in our more direct approach. We use the formalism of Bayesian probability theory and implement a Markov Chain Monte Carlo algorithm to obtain estimates and uncertainties for the parameters of our BLR models. Fitting of models to the data requires knowledge of the continuum flux at all times, not just the measured times. We use Gaussian Processes to interpolate and extrapolate the continuum light curve data in a fully consistent probabilistic manner, taking the associated errors into account. We illustrate our method using simple models of BLR geometry and dynamics and show that we can recover the parameter values of our test systems with realistic uncertainties that depend upon the variability of the AGN and the quality of the reverberation mapping observing campaign. With a geometry model we can recover the mean radius of the BLR to within {approx}0.1 dex random uncertainty for simulated data with an integrated line flux uncertainty of 1.5%, while with a dynamical model we can recover the black hole mass and the mean radius to within {approx}0.05 dex random uncertainty, for simulated data with a line profile average signal-to-noise ratio of 4 per spectral pixel. These uncertainties do not include modeling errors, which are likely to be present in the analysis of real data, and should therefore be considered as lower limits to the accuracy of the method.

79 ASTRONOMY AND ASTROPHYSICS↗

THE Pa{alpha} LUMINOSITY FUNCTION OF H II REGIONS IN NEARBY GALAXIES FROM HST/NICMOS

The H II region luminosity function (LF) is an important tool for deriving the birthrates and mass distribution of OB associations and is an excellent tracer of the newly formed massive stars and associations. To date, extensive work (predominantly in H{alpha}) has been done from the ground, which is hindered by dust extinction and the severe blending of adjacent (spatially or in projection) H II regions. Reliably measuring the properties of H II regions requires a linear resolution <40 pc, but analyses satisfying this requirement have been done only in a handful of galaxies, so far. As the first space-based work using a galaxy sample, we have selected 12 galaxies from our HST/NICMOS Pa{alpha} survey and studied the LF and size distribution of H II regions both in individual galaxies and cumulatively, using a virtually extinction-free tracer of the ionizing photon rate. The high angular resolution and low sensitivity to diffuse emission of NICMOS also offer an advantage over ground-based imaging by enabling a higher degree of de-blending of the H II regions. We do not confirm the broken power-law LFs found in ground-based studies. Instead, we find that the LFs, both individual and co-added, follow a single power law dN(L)/dln L{proportional_to}L {sup -1}, are consistent with the mass function of star clusters in nearby galaxies, and are in agreement with the results of the existing analyses with Hubble Space Telescope (HST) data. The individual and co-added size distributions of H II regions are both roughly consistent with dN(D)/dln D{proportional_to}D {sup -3}, but the power-law scaling is probably contaminated by blended regions or complexes.

79 ASTRONOMY AND ASTROPHYSICS↗

TU-F-17A-05: Calculating Tumor Trajectory and Dose-Of-The-Day for Highly Mobile Tumors Using Cone-Beam CT Projections

Purpose: Cone-beam CT (CBCT) projection images provide anatomical data in real-time over several respiratory cycles, forming a comprehensive picture of tumor movement. We developed a method using these projections to determine the trajectory and dose of highly mobile tumors during each fraction of treatment. Methods: CBCT images of a respiration phantom were acquired, where the trajectory mimicked a lung tumor with high amplitude (2.4 cm) and hysteresis. A template-matching algorithm was used to identify the location of a steel BB in each projection. A Gaussian probability density function for tumor position was calculated which best fit the observed trajectory of the BB in the imager geometry. Two methods to improve the accuracy of tumor track reconstruction were investigated: first, using respiratory phase information to refine the trajectory estimation, and second, using the Monte Carlo method to sample the estimated Gaussian tumor position distribution. 15 clinically-drawn abdominal/lung CTV volumes were used to evaluate the accuracy of the proposed methods by comparing the known and calculated BB trajectories. Results: With all methods, the mean position of the BB was determined with accuracy better than 0.1 mm, and root-mean-square (RMS) trajectory errors were lower than 5% of marker amplitude. Use of respiratory phase information decreased RMS errors by 30%, and decreased the fraction of large errors (>3 mm) by half. Mean dose to the clinical volumes was calculated with an average error of 0.1% and average absolute error of 0.3%. Dosimetric parameters D90/D95 were determined within 0.5% of maximum dose. Monte-Carlo sampling increased RMS trajectory and dosimetric errors slightly, but prevented over-estimation of dose in trajectories with high noise. Conclusions: Tumor trajectory and dose-of-the-day were accurately calculated using CBCT projections. This technique provides a widely-available method to evaluate highly-mobile tumors, and could facilitate better strategies to mitigate or compensate for motion during SBRT.

60 APPLIED LIFE SCIENCES↗

Host-Directed Antimicrobial Drugs with Broad-Spectrum Efficacy against Intracellular Bacterial Pathogens

We sought a new approach to treating infections by intracellular bacteria, namely, by altering host cell functions that support their growth. We screened a library of 640 Food and Drug Administration (FDA)-approved compounds for agents that render THP-1 cells resistant to infection by four intracellular pathogens. We identified numerous drugs that are not antibiotics but were highly effective in inhibiting intracellular bacterial growth with limited toxicity to host cells. These compounds are likely to target three kinds of host functions: (i) G protein-coupled receptors, (ii) intracellular calcium signals, and (iii) membrane cholesterol distribution. The compounds that targeted G protein receptor signaling and calcium fluxes broadly inhibited Coxiella burnetii, Legionella pneumophila, Brucella abortus, and Rickettsia conorii, while those directed against cholesterol traffic strongly attenuated the intracellular growth of C. burnetii and L. pneumophila. These pathways probably support intracellular pathogen growth so that drugs that perturb them may be therapeutic candidates. Combining host- and pathogen-directed treatments is a strategy to decrease the emergence of drug-resistant intracellular bacterial pathogens.

59 BASIC BIOLOGICAL SCIENCES↗

Bayesian inference for the seismic moment tensor using regional waveforms and a data-derived distribution of velocity models

The largest source of uncertainty in any source inversion is the velocity model used to construct the transfer function employed in the forward model that relates observed ground motion to the seismic moment tensor. However, standard inverse procedures often does not quantify uncertainty in the seismic moment tensor due to error in the Green’s functions from uncertain event location and Earth structure. We attempt to incorporate this uncertainty into an estimation of the seismic moment tensor using a distribution of velocity models calculated in a prior effort based on different and complementary data sets. The posterior distribution of velocity models is then used to construct Green’s functions for use in Bayesian inference of an unknown seismic moment tensor using regional waveform data. The combined likelihood is estimated using data-specific error models and the posterior of the seismic moment tensor is estimated and can be interpreted in terms of most-probable source-type.

58 GEOSCIENCES↗

Spacecraft dynamics characterization and control system failure detection, volume 1

The work under this grant has been directed to two aspects of the control of flexible spacecraft: (1) the modeling of deployed or erected structures including nonlinear joint characteristics; and (2) the detection and isolation of failures of the components of control systems for large space structures. The motivation for the first of these research tasks is the fact that very large assemblies in space will have to be built or deployed in situ. A likely scenario is, in fact, a combination of these wherein modules which are folded for transportation into orbit are erected to their final configuration and then jointed with other such erected modules to form the full assembly. Any such erectable modules will have joints. It remains to be seen whether or not joints designed for operational assemblies will have nonlinear properties, but it seems prudent to develop a methodology for dealing with that possibility. The motivation for the second of these research tasks is the fact that we foresee large assemblies in space which will require active control to damp vibrations and/or hold a desired shape. Lightweight structures will be very flexible, with many elastic modes having very low frequencies. In order to control these modes well, the control system will likely require many sensors and many actuators, probably distributed over much of the structure. The combination of a large number of control system components with long operational periods virtually guarantees that these systems will suffer control system component failures during operation. The control system must be designed to tolerate failures of some sensors and actuators, and still be able to continue to perform its function.

Source record↗

Evolved stars in Omega Centauri. I - Radial distribution of blue subdwarfs

A U - V color-magnitude diagram containing over 5000 stars from 10 fields in Omega Centauri at or brighter than the main-sequence turnoff is presented. Completeness corrections are obtained as a continuous function of magnitude and radial distance are obtained and used to show that the blue subdwarfs are centrally concentrated with respect to subgiants and stars on the horizontal branch proper. The chance probability of this result is less than 1 percent. Since the blue subdwarfs probably consist of helium-burning cores of about 0.5 solar mass surrounded by a thin hydrogen envelope, mass segregation could not produce this result if these stars had evolved singly. Two kinds of possible precursor systems are considered: pairs of degenerate dwarfs which subsequently merge to form helium-burning stars, and moderately wide binaries in which mass transfer is initiated shortly before the helium flash is ignited.

Bailyn, Charles D.↗

Interactive Soil Dust Aerosol Model in the GISS GCM: Sensitivity of the Soil Dust Cycle to Radiative Properties of Soil Dust Aerosols - Part 1

The sensitivity of the soil dust aerosol cycle to the radiative forcing by soil dust aerosols is studied. Four experiments with the NASA/GISS atmospheric general circulation model, which includes a soil dust aerosol model, are compared, all using a prescribed climatological sea surface temperature as lower boundary condition. In one experiment, dust is included as dynamic tracer only (without interacting with radiation), whereas dust interacts with radiation in the other simulations. Although the single scattering albedo of dust particles is prescribed to be globally uniform in the experiments with radiatively active dust, a different single scattering albedo is used in those experiments to estimate whether regional variations in dust optical properties, corresponding to variations in mineralogical composition among different source regions, are important for the soil dust cycle and the climate state. On a global scale, the radiative forcing by dust generally causes a reduction in the atmospheric dust load corresponding to a decreased dust source flux. That is, there is a negative feedback in the climate system due to the radiative effect of dust. The dust source flux and its changes were analyzed in more detail for the main dust source regions. This analysis shows that the reduction varies both with the season and with the single scattering albedo of the dust particles. By examining the correlation with the surface wind, it was found that the dust emission from the Saharan/Sahelian source region and from the Arabian peninsula, along with the sensitivity of the emission to the single scattering albedo of dust particles, are related to large scale circulation patterns, in particular to the trade winds during Northern Hemisphere winter and to the Indian monsoon circulation during summer. In the other regions, such relations to the large scale circulation were not found. There, the dependence of dust deflation to radiative forcing by dust particles is probably dominated by physical processes with short time scales. The experiments show that dust radiative forcing can lead to significant changes both in the soil dust cycle and in the climate state. To estimate dust concentration and radiative forcing by dust more accurately, dust size distributions and dust single scattering albedo in the model should be a function of the source region, because dust concentration and climate response to dust radiative forcing are sensitive to dust radiative parameters.

Perlwitz, Jan↗

Cross sections and photoelectron angular distributions in photodetachment from negative ions using equation-of-motion coupled-cluster Dyson orbitals

We report total and differential cross sections for photodetachment from negative ions using Dyson orbitals calculated from equation-of-motion coupled-cluster wave functions and free wave description of the detached electron. The energy dependence of the cross sections is reproduced well, however, the accuracy of absolute values varies. For F{sup -}, C{sup -}, NH{sub 2}{sup -}, and H{sup -}, the calculated cross sections are within the error bars from the experimental values, whereas the errors for Li{sup -} and OH{sup -} are about 20%. The largest errors are observed for O{sup -} and O{sub 2}{sup -} for which the calculated cross sections differ from the experimental ones by factors of 3 and 2, respectively. Calculated anisotropy parameters for atomic anions exhibit too slow decrease, which suggests that the diffuseness of the computed Dyson orbitals is underestimated. Moreover, in the asymptotic region, the orbitals exhibit artifactual oscillations probably due to the limitations of Gaussian basis sets. The analysis of the trends in the experimental anisotropy parameters suggests that the interaction of the detached electron with the core, which is neglected in the present model, is important.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Dynamic Simulations of the Effect on the Hydration of Nafion in the Presence of a Platinum Nanoparticle

Platinum catalysts play a critical role in fuel cell technology. Current optimization efforts focus on reducing the amount of Pt in the system and optimizing the utilization of that which remains. The effect of the presence of Pt nanoparticles on the local structure and morphology of the polymer electrolyte membrane, water, and hydronium ions has been studied at molecular level in this work. Classical molecular dynamics simulation has been used to examine a system containing a 4 nm fcc cubic ({100} face) platinum nanoparticle at the center surrounded by Nafion polymer, water molecules, and hydronium ions at λ = 3, 6, 9, 15, and 22. The changes in density and orientation distribution of sulfonic acid groups in the side-chains, water, and hydronium as a function of distance from platinum surface are analyzed in this study. Sulfonic acid groups and hydronium ions show a very high increase in density near the platinum surface, and they approach the bulk value as they move away from the platinum surface. At lower water contents (λ = 3 and 6), water is strongly attracted to platinum surface, increasing the density near the platinum surface. However, at the highest humidity level studied, the density of water farthest from the platinum surface (>20 Å) is higher than the bulk value and the density of water nearest to the platinum surface. The above observed phenomenon is explained using the probability distribution of orientation computed at various distances from platinum surface. As the water content increases, sulfonic acid groups show a preferential orientation for the side-chains to align themselves horizontally on the platinum than vertically, thereby covering a larger area of platinum and pushing the water away from the platinum surface. This causes the water density to drop near the platinum surface. Water molecules and hydronium ions show preference to certain orientations near the platinum surface, but usually to none as they move away from the platinum surface.

Chemistry↗

Iron oxidation state of FeTiO[subscript 3] under high pressure

The oxidation state of iron in FeTiO{sub 3} under high pressure was investigated by combining x-ray diffraction, Moessbauer spectroscopy, x-ray-absorption spectroscopy, and density-functional theory based calculations. Our results demonstrate that the ilmenite-to-perovskite phase transition occurs above 20 GPa at room temperature and on compression two phases coexist to 40 GPa. The Fe{sup 3+}/{Sigma}Fe ratio increases up to 16 GPa, probably attributed to the d-electron drifting of cations via the oxygen bridge in the adjacent octahedral, then decreases at higher pressure due to the ilmenite-to-perovskite phase transition accompanied by a slight decrease in iron valence state. Our ab initio calculations further show that the most significant changes in the charge distribution in FeTiO{sub 3} are associated with Ti and O.

36 MATERIALS SCIENCE↗

The calculation of radial dose from heavy ions: predictions of biological action cross sections

The track structure model of heavy ion cross sections was developed by Katz and co-workers in the 1960s. In this model the action cross section is evaluated by mapping the dose-response of a detector to gamma rays (modeled from biological target theory) onto the radial dose distribution from delta rays about the path of the ion. This is taken to yield the radial distribution of probability for a "hit" (an interaction leading to an observable end-point). Radial integration of the probability yields the cross section. When different response from ions of different Z having the same stopping power is observed this model may be indicated. Since the 1960s there have been several developments in the computation of the radial dose distribution, in the measurement of these distributions, and in new radiobiological data against which to test the model. The earliest model, by Butts and Katz made use of simplified delta ray distribution functions, of simplified electron range-energy relations, and neglected angular distributions. Nevertheless it made possible the calculation of cross sections for the inactivation of enzymes and viruses, and allowed extension to tracks in nuclear emulsions and other detectors and to biological cells. It set the pattern for models of observable effects in the matter through which the ion passed. Here we outline subsequent calculations of radial dose which make use of improved knowledge of the electron emission spectrum, the electron range-energy relation, the angular distribution, and some considerations of molecular excitation, of particular interest both close to the path of the ion and the outer limits of electron penetration. These are applied to the modeling of action cross sections for the inactivation of several strains of E-coli and B. subtilis spores where extensive measurements in the "thin-down" region have been made with heavy ion beams. Such calculations serve to test the radial dose calculations at the outer limit of electron penetration. We lack data from which to test these calculations in regions close to the path of the ion aside from our earliest work on latent tracks in plastics, though it appears that the criterion then suggested for the threshold of track formation, of a minimal dose at a minimal distance (of about 20 angstroms, in plastics), remains valid.

NASA Discipline Radiation Health↗

Composite Power System Reliability with Renewables and Customer Flexibility

Composite Power System Reliability is defined as the computational procedure that quantifies the probability that the power system will perform the function of delivering electric power to customers adequately, on a continuous basis and with an acceptable quality. This definition leaves many details undefined and exemplifies the ambiguity in reliability analysis. The increasing deployment of wind and PV creates additional uncertainties that make reliability analysis a rather complex issue. Because of increased uncertainty the need for composite reliability analysis and utilization of results in power system planning is critical. New approaches are emerging for dealing with these problems from the operational point of view, including demand response programs, tapping on customer and distributed resource flexibility and new control approaches. The key question to be addressed is: how the new operational paradigms affect composite power system reliability. Here, this paper presents the ongoing work of the IEEE Composite System Reliability Task Force of the IEEE PES Reliability, Risk, Probability Application (RRPA) Subcommittee.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A state estimation approach based on stochastic expansions

This paper presents a new approach for state estimation problems. It is based on the representation of random variables using stochastic functions. Its main idea is to expand the state variables in terms of the noise variables of the system, and then estimate the unnoisy value of the state variables by taking the mean value of the stochastic expansion. Moreover, it was shown that in some situations, the proposed approach may be adapted to the determination of the probability distribution of the state noise. For the determination of the coefficients of the expansions, we present three approaches: moment matching (MM), collocation (COL) and variational (VAR). In the numerical analysis section, three examples are analyzed including a discrete linear system, the Influenza in a boarding school and the state estimation problem in the Hodgkin–Huxley’s model. In all these examples, the proposed approach was able to estimate the values of the state variables with precision, i.e., with very low RMS values.

97 MATHEMATICS AND COMPUTING↗

Inhomogeneous linewidth broadening and radiative lifetime dispersion of size dependent direct bandgap radiation in Si quantum dot

The SiO{sub x} (SiO{sub x}:Si-QDs) with buried Si quantum dots (Si-QDs) is synthesized by plasma-enhanced chemical vapor deposition (PECVD), and the size-dependent wave-function of Si-QDs embedded in Si-rich SiO{sub 2} matrix is experimentally and theoretically analyzed to reformulate its bandgap energy as E{sub g}(d) = 1.12+5.83/d{sup 1.78}. The photoluminescent lifetime of Si-QDs is dominated by the non-phonon assisted radiative recombination. Shrinking the Si-QD size from 4.3 to 1.9 nm increases the overlapping probability of electron-hole wave-functions in Si-QD to shorten the non-phonon assisted radiative lifetime from 6.3 {mu}s to 83 ns. Fitting the time-resolved photoluminescence trace with a stretched exponential decay function reveals a lifetime dispersion factor. The lifetime dispersion greatly reduced from 0.8 to 0.39 by enlarging the size distribution of Si-QDs from 0.2 to 1.1 nm, which elucidates the inhomogeneous linewidth broadening feature of Si-QDs. Based on the simulation of non-phonon assisted recombination process, the full-band stretched exponential decay analysis confirms the correlation between inhomogeneous linewidth broadening and lifetime dispersion in Si-QDs.

36 MATERIALS SCIENCE↗

Use of collateral information to improve LANDSAT classification accuracies

Methods to improve LANDSAT classification accuracies were investigated including: (1) the use of prior probabilities in maximum likelihood classification as a methodology to integrate discrete collateral data with continuously measured image density variables; (2) the use of the logit classifier as an alternative to multivariate normal classification that permits mixing both continuous and categorical variables in a single model and fits empirical distributions of observations more closely than the multivariate normal density function; and (3) the use of collateral data in a geographic information system as exercised to model a desired output information layer as a function of input layers of raster format collateral and image data base layers.

Strahler, A. H.↗

Soft X-ray observations of pre-main sequence stars in the chamaeleon dark cloud

Einstein IPC observations of the nearby Chamaeleon I star forming cloud show 22 well-resolved soft X-ray sources in a 1x2 deg region. Twelve are associated with H-alpha emission line pre-main sequence (PMS) stars, and four with optically selected PMS stars. Several X-ray sources have two or more PMS stars in their error circles. Optical spectra were obtained at CTIO of possible stellar counterparts of the remaining X-ray sources. They reveal 5 probable new cloud members, K7-MO stars with weak or absent emission lines. These naked X-ray selected PMS stars are similar to those found in the Taurus-Auriga cloud. The spatial distributions and H-R diagrams of the X-ray and optically selected PMS stars in the cloud are very similar. Luminosity functions indicate the Chamaeleon stars are on average approximately 5 times more X-ray luminous than Pleiad dwarfs. A significant correlation between L sub x and optical magnitude suggests this trend may continue within the PMS phase of stellar evolution. The relation of increasing X-ray luminosity with decreasing stellar ages is thus extended to stellar ages as young as 1 million years.

Feigelson, Eric D.↗